Ústav fyziky materiálů AV ČR, v. v. i. > Zaměstnanci > Buršík Jiří

RNDr. Jiří Buršík, CSc., DSc.

Místnost410
Telefon+420 532 290 473
E-mail[javascript protected email address]
Researcher IDB-8684-2013
Pozicevědecký pracovník - Skupina struktury fází a termodynamiky


2021

Bertolla L., Šulák I., Buršík J., Dlouhý I., Smilek J., Mácová P., Holas J.: Exfoliation of hexagonal boron nitride nanosheets in low-modulus concentrated alkali silicate pastes. Mater. Lett. 292 (2021) 129551

Životský O., Luňáček J., Jirásková Y., Buršík J., Ederer J., Janoš P., Cabanova K.: Influence of annealing temperature on degradation efficiency and iron oxide transformations in CeO2/Fe-oxide sorbents. AIP Adv. 11 (2021) 015308

Yan X., Brož P., Vřešťál J., Vlach J., Buršík J., Mazalová M., Pavlů J., Smetana B., Rogl G., Eiberger M., Grytsiv A., Michor H., Müller H., Giester G., Rogl P.: On the constitution and thermodynamic modeling of the phase diagrams Nb-Mn and Ta-Mn. J. Alloys Comp. 865 (2021) 158715

Zelenka F., Brož P., Vřešťál J., Buršík J., Zemanová A., Rogl G., Rogl P.: Study of thermal stability of half-Heusler alloys TiFe1.33Sb and TixNb1-xFeSb (x = 0, 0.15) by differential thermal analysis and Knudsen effusion method. CALPHAD 74 (2021) 102292

Rogl G., Renk O., Ghosh S., Mallik R., Grytsiv A., Buršík J., Schafler E., Tuomisto F., Bauer E., Rogl P.: Properties of HPT-Processed Large Bulks of p-Type Skutterudite DD0.7Fe3CoSb12 with ZT > 1.3. ACS Applied Energy Materials 4 (2021) 4831-4844

Zelenka F., Strádal J., Brož P., Vřešťál J., Buršík J., Zemanová A., Rogl G., Rogl P.: Study of thermal stability of n-type skutterudites Sr0.07Ba0.07Yb0.07Co4Sb12 by differential thermal analysis and Knudsen effusion method. CALPHAD 73 (2021) 102258

Sopoušek J., Drenčaková D., Brož P., Buršík J., Zemanová A., Roupcová P.: On thermal stability of nanocrystalline Ag-Cu-S powders. J Nanopart Res 23 (2021) 138

Životský O., Markov D., Hrabovská K., Buršík J., Jirásková Y.: Analysis of Magneto-Optical Hysteresis Loops of Amorphous and Surface-Crystalline Fe-Based Ribbons. Materials 14 (2021) 141



2020

Sopoušek J., Pinkas J., Buršík J., Svoboda M., Krásenský P.: Continuous Flow Synthesis of Iron Oxide Nanoparticles Using Water-in-Oil Microemulsion. Colloid Journal 82 (2020) 727-734

Vykoukal V., Zelenka F., Buršík J., Káňa T., Kroupa A., Pinkas J.: Thermal properties of Ag@Ni core-shell nanoparticles. CALPHAD 69 (2020) 101741

Jirásková Y., Buršík J., Ederer J., Janoš P., Jurica J., Luňáček J., Životský O.: Effect of magnetite transformations on degradation efficiency of cerium dioxide-magnetite composite. Journal of Materials Research and Technology 9 (2020) 4431-4439

Rogl G., Soprunyuk V., Schranz W., Zehetbauer M., Buršík J., Müller H., Bauer E., Rogl P.: Resistivity and Thermal Expansion (4.2-820 K) of Skutterudites after Severe Plastic Deformation via HPT. Z. Anorg. Allg. Chem. 646 (2020) 1267-1272

Rogl G., Ghosh S., Wang L., Buršík J., Grytsiv A., Kerber M., Bauer E., Mallik R., Chen X., Zehetbauer M., Rogl P.: Half-Heusler alloys: Enhancement of ZT after severe plastic deformation (ultra-low thermal conductivity). Acta Mater. 183 (2020) 285-300

Brož P., Zelenka F., Vřešťál J., Zemanová A., Kroupa A., Buršík J., Svoboda M., Šimoníková L., Pokorný T.: Experimental study and thermodynamic re-assessment of the Co-Sb system. CALPHAD 68 (2020) 101694



2019

Buršík J., Buršíková V., Rogl G., Rogl P.: Local mechanical properties of advanced skutterudites processed by various routes. IOP Conf. Ser.: Mater. Sci. Eng. 613 (2019) 012036

Zelenka F., Brož P., Vřešťál J., Buršík J., Rogl G., Grytsiv A., Rogl P.: Study of thermal stability of p-type skutterudites DD0.7Fe3CoSb12 by Knudsen effusion mass spectrometry. RSC Advances 9 (2019) 21451-21459

Jirásková Y., Buršík J., Janoš P., Luňáček J., Chrobak A., Životský O.: Effect of Iron Impurities on Magnetic Properties of Nanosized CeO2 and Ce-Based Compounds. Metals 9 (2019) 222

Životský O., Buršík J., Janičkovič D., Titov A., Jirásková Y.: Low-temperature magnetic transitions in Fe2MnSi Heusler alloys prepared in bulk and ribbon form. J. Magn. Magn. Mater. 475 (2019) 5-9

Jirásková Y., Buršík J., Janičkovič D., Životský O.: Influence of Preparation Technology on Microstructural and Magnetic Properties of Fe2MnSi and Fe2MnAl Heusler Alloys. Materials 12 (2019) 1-14

Brož P., Hejduková M., Vykoukal V., Zelenka F., Sopoušek J., Buršík J., Zobač O.: Study of surface effects and catalytic properties of selected Ni-based bimetallic nanoparticles by Knudsen effusion mass spectrometry. CALPHAD 64 (2019) 334-341

Vykoukal V., Halasta V., Babiak M., Buršík J., Pinkas J.: Morphology Control in AgCu Nanoalloy Synthesis by Molecular Cu(I) Precursors. Inorganic Chemistry 58 (2019) 15246-15254

Vykoukal V., Buršík J., Roupcová P., Cullen D., Pinkas J.: Solvothermal hot injection synthesis of core-shell AgNi nanoparticles. J. Alloys Comp. 770 (2019) 377-385

Brož P., Zelenka F., Kohoutek Z., Vřešťál J., Vykoukal V., Buršík J., Zemanová A., Rogl G., Rogl P.: Study of thermal stability of CoSb3 skutterudite by Knudsen effusion mass spectrometry. CALPHAD 65 (2019) 1-7

Pinkas J., Sopoušek J., Brož P., Vykoukal V., Buršík J., Vřešťál J.: Synthesis, structure, stability and phase diagrams of selected bimetallic silver- and nickel-based nanoparticles. CALPHAD 64 (2019) 139-148

Mrázek J., Vytykáčová S., Buršík J., Puchý V., Girman V., Peterka P., Kašík I.: Sol-gel route to nanocrystalline Eu2Ti2O7 films with tailored structural and optical properties. J. Amer. Ceram. Soc. 102 (2019) 6713-6723

Zábranský L., Souček P., Vašina P., Dugáček J., Sťahel P., Buršík J., Svoboda M., Mikšová R., Peřina V., Balázsi K., Cigány Z., Buršíková V.: Microstructural changes of amorphous Mo-B-C coatings upon thermal annealing. Surf. Coat. Technol. 379 (2019) 125052



2018

Souček P., Zábranský L., Buršíková V., Buršík J., Debnárová S., Svoboda M., Peřina V., Vašina P.: Fracture Resistance Enhancement in Hard Mo-B-C Coatings Tailored by Composition and Microstructure. J. Nanomater. 2018 (2018) 5184587

Rogl P., Romaka V., Buršík J., Michor H., Reissner M., Giester G., Homolová V.: Structure and properties of a novel boride (V0.92Fe0.08)2FeB2 with partially ordered U3Si2-type. J. Alloys Comp. 746 (2018) 638-647

Luňáček J., Životský O., Janoš P., Došek M., Chrobak A., Maryško M., Buršík J., Jirásková Y.: Structure and magnetic properties of synthesized fine cerium dioxide nanoparticles. J. Alloys Comp. 753 (2018) 167-175

Failamani F., Podloucký R., Buršík J., Rogl G., Michor H., Müller H., Bauer E., Giester G., Rogl P.: Boron-phil and boron-phob structure units in novel borides Ni3Zn2B and Ni2ZnB: experiment and first principles calculations. Dalton Trans. 47 (2018) 3303-3320

Titov A., Jirásková Y., Životský O., Buršík J., Janičkovič D.: Microstructure and magnetism of Co2FeAl Heusler alloy prepared by arc and induction melting compared with planar flow casting. AIP Adv. 8 (2018) 047206

Mrázek J., Aubrecht J., Todorov F., Buršík J., Puchý V., Džunda R., Vytykáčová S., Kašík I.: CO2 laser-assisted preparation of transparent Eu2Ti2O7 thin films. Ceram. Int. 44 (2018) 9479-9483

Jirásková Y., Buršík J., Seidlerová J., Mamulová Kutláková K., Šafařík I., Šafaříková M., Pospíšková K., Životský O.: Microstructural Analysis and Magnetic Characterization of Native and Magnetically Modified Montmorillonite and Vermiculite. J. Nanomater. 2018 (2018) 3738106

Rogl G., Grytsiv A., Anbalagan R., Buršík J., Kerber M., Schafler E., Zehetbauer M., Bauer E., Rogl P.: Direct SPD-processing to achieve high-ZT skutterudites. Acta Mater. 159 (2018) 352-363

Rogl G., Buršík J., Grytsiv A., Puchegger S., Soprunyuk V., Schranz W., Yan X., Bauer E., Rogl P.: Nanostructuring as a tool to adjust thermal expansion in high ZT skutterudites. Acta Mater. 145 (2018) 359-368

Buršík J., Buršíková V., Rogl G., Rogl P.: Microstructure and Local Mechanical Properties of Skutterudites with Addition of Metallic Borides. Key Eng. Mater. 784 (2018) 9-14

Bannov A., Jašek O., Prášek J., Buršík J., Zajíčková L.: Enhanced Ammonia Adsorption on Directly Deposited Nanofibrous Carbon Films. J. Sensors 2018 (2018) 7497619



2017

Jirásková Y., Buršík J., Zemanová A., Čížek J., Hruška P., Životský O.: Effect of hydrogen on Fe and Pd alloying and physical properties. Int. J. Hydrogen Energy 42 (2017) 6885-6901

Jirásková Y., Buršík J., Životský O., Luňáček J., Janoš P.: Magnetic and Mössbauer Study of Cerium-Based Reactive Sorbent. Acta Phys. Pol. A 131 (2017) 1096-1098

Ostapovec A., Buršík J., Krahula K., Král L., Serra A.: On the relationship between (1 1 -2 2) and (1 1 -2 6) conjugate twins and double extension twins in rolled pure Mg. Philos. Mag. 97 (2017) 1088-1101

Buršíková V., Sobota J., Grossman J., Fořt T., Dupák L., Zábranský L., Souček P., Vašina P., Buršík J.: Study of Fracture Resistance of Nanolaminate Coatings Using Indentation and Impact Tests. Solid State Phenom. 258 (2017) 318-321

Buršík J., Buršíková V., Souček P., Zábranský L., Vašina P.: Characterization of Ta-B-C nanostructured hard coatings. Mater. Sci. Eng. A 175 (2017) 012020

Mrázek J., Boháček J., Vytykáčová S., Buršík J., Puchý V., Robert D., Kašík I.: Photolithographic patterning of nanocrystalline europium-titanate Eu2Ti2O7 thin films on silicon substrates. Mater. Lett. 209 (2017) 216-219

Buršík J., Kuběna I., Buršíková V., Souček P., Zábranský L., Mirzaei S., Vašina P.: W-B-C Nanostructured Layers - Microstructure and Mechanical Properties. Solid State Phenom. 258 (2017) 416-419

Sopoušek J., Kryštofová A., Premović M., Zobač O., Polsterová S., Brož P., Buršík J.: Phase diagram prediction, synthesis, characterization, and thermal stability. CALPHAD 58 (2017) 25-33

Titov A., Životský O., Hendrych A., Janičkovič D., Buršík J., Jirásková Y.: Co2FeSi Heusler Alloy Prepared by Arc Melting and Planar. Acta Phys. Pol. A 131 (2017) 654-656

Zábranský L., Buršíková V., Souček P., Vašina P., Dugáček J., Sťahel P., Buršík J., Svoboda M., Peřina V.: Thermal stability of hard nanocomposite Mo-B-C coatings. Vacuum 138 (2017) 199-204



2016

Buršík J., Kuběna I., Buršíková V., Souček P., Zábranský L., Vašina P.: Mo-B-C and Ta-B-C Nanostructured Layers with Promising Fracture Toughness. Defect Diffus. Forum 368 (2016) 107-110

Luňáček J., Životský O., Jirásková Y., Buršík J., Janoš P.: Thermally stimulated iron oxide transformations and magnetic behaviour of cerium dioxide/iron oxide reactive sorbents. Mater. Character. 120 (2016) 295-303

Buršíková V., Buršík J., Zábranský L., Souček P., Vašina P.: Study of the Local Mechanical Properties of Magnetron Sputtered Nanolaminate Coatings. Defect Diffus. Forum 368 (2016) 111-114

Škoda D., Stýskalík A., Moravec Z., Bezdička P., Buršík J., Mutin P., Pinkas J.: Mesoporous SnO2-SiO2 and Sn-silica-carbon nanocomposites by novel non-hydrolytic templated sol-gel synthesis. RSC Advances 6 (2016) 68739-68747

Zábranský L., Buršíková V., Souček P., Vašina P., Buršík J.: On the study of the mechanical properties of Mo-B-C coatings. Eur. Phys. J. - Appl. Phys. 75 (2016) 24716

Životský O., Titov A., Jirásková Y., Buršík J., Hendrych A., Hrabovská K., Tsepelev V.: Surface and bulk magnetic anisotropy in bilayered CoSiB/FeNbCuSiB and FeNbSiB/FeSiB ribbons. J. Alloys Comp. 681 (2016) 402-411

Buršík J., Buršíková V., Souček P., Zábranský L., Vašina P.: Nanostructured Mo-B-C coatings. Rom. Rep. Phys. 68 (2016) 1069-1075



2015

Bauer E., Royanian E., Michor H., Sologub O., Scheidt E., Gonçalves A., Buršík J., Wolf W., Reith D., Blaas-Schenner C., Moser R., Podloucký R., Rogl P.: Superconductivity and spin fluctuations in the actinoid-platinum metal borides {Th,U}Pt3B. Phys. Rev. B 92 (2015) 024511

Mrázek J., Potel M., Buršík J., Mráček A., Kalistová A., Jonášová Š., Boháček J., Kašík I.: Sol-gel synthesis and crystallization kinetics of dysprosium-titanate Dy2Ti2O7 for photonic applications. Mater. Chem. Phys. 168 (2015) 159-167

Jirásková Y., Buršík J., Hapla M., Turek I.: Influence of molybdenum on the alloying and physical properties of Fe-Al. J. Supercond. Novel Magn. 28 (2015) 905-910

Ostapovec A., Buršík J., Gröger R.: Deformation due to migration of faceted twin boundaries in magnesium and cobalt. Philos. Mag. 95 (2015) 4106-4117

Buršík J., Buršíková V., Svoboda M.: Local Mechanical Properties of Cu-Co Alloys with Coherent Co Precipitates. Key Eng. Mater. 662 (2015) 15-18

Sopoušek J., Zobač O., Vykoukal V., Buršík J., Roupcová P., Brož P., Pinkas J., Vřešťál J.: Temperature stability of AgCu nanoparticles. J Nanopart Res 17 (2015) 478

Buršík J., Buršíková V., Jirásková Y.: Study of the Mechanical Properties of Single-Layered and Bilayered CoCrFeSi Ribbons Using Quasistatic and Dynamic Nanoindentation Tests. Key Eng. Mater. 662 (2015) 91-94

Rogl G., Grytsiv A., Buršík J., Horký J., Anbalagan R., Bauer E., Mallik R., Rogl P., Zehetbauer M.: Changes in microstructure and physical properties of skutterudites after severe plastic deformation. Phys. Chem. Chem. Phys. 17 (2015) 3715-3722

Mrázek J., Surýnek M., Bakardijeva S., Buršík J., Proboštová J., Kašík I.: Luminescence properties of nanocrystalline europium titanate Eu2Ti2O7. J. Alloys Comp. 645 (2015) 57-63

Zábranský L., Buršíková V., Daniel J., Souček P., Vašina P., Dugáček J., Sťahel P., Caha O., Buršík J., Peřina V.: Comparative analysis of thermal stability of two different nc-TiC/a-C:H coatings. Surf. Coat. Technol. 267 (2015) 32-39

Sopoušek J., Zobač O., Buršík J., Roupcová P., Vykoukal V., Brož P., Pinkas J., Vřešťál J.: Heat-induced spinodal decomposition of Ag-Cu nanoparticles. Phys. Chem. Chem. Phys. 17 (2015) 28277-28285

Jirásková Y., Buršík J., Roupcová P., Jančík D., Čížek J.: Structural and compositional stability of the mechanically alloyed (Fe,Mo)-Al at elevated temperatures. Mater. Chem. Phys. 168 (2015) 108-116

Kroupa A., Káňa T., Buršík J., Zemanová A., Šob M.: Modelling of phase diagrams of nanoalloys with complex metallic phases: Application to Ni-Sn. Phys. Chem. Chem. Phys. 17 (2015) 28200-28210



2014

Wind J., Romaniv O., Schöllhammer G., Buršík J., Michor H., Giester G., Rogl P.: The systems Tantalum(Niobium)-Cobalt-Boron. J. Phase Equil. Diffus. 35 (2014) 43-85

Falat L., Čiriprová L., Kepič J., Buršík J., Podstranská I.: Correlation between microstructure and creep performance of martensitic/austenitic transition weldment in dependence of its post-weld heat treatment. Eng. Fail. Anal. 40 (2014) 141-152

Zobač O., Sopoušek J., Buršík J., Zemanová A., Roupcová P.: Experimental study of the Sb-Sn-Zn alloy system. Metall. Mater. Trans. A 45 (2014) 1181-1188

Buršíková V., Buršík J., Zábranský L., Vašina P., Souček P., Peřina V.: Study of the Nanoindentation Induced Effects in Nanocomposite. Key Eng. Mater. 606 (2014) 159-162

Kováč F., Petryshynets I., Buršík J., Sopko M.: Influence of New System Nano-Inhibitors on the Abnormal Grain Growth with Goss Crystallographic Orientation of Silicon Steels. Mater. Sci. Forum 783-786 (2014) 2579-2584

Jirásková Y., Buršík J., Turek I., Hapla M., Titov A., Životský O.: Phase and magnetic studies of the high-energy alloyed Ni-Fe. J. Alloys Comp. 594 (2014) 133-140

Jirásková Y., Buršík J., Životský O., Cuda J.: Influence of Fe2O3 on alloying and magnetic properties of Fe-Al . Mater. Sci. Eng. B 186 (2014) 73-78

Titov A., Životský O., Jirásková Y., Hendrych A., Buršík J., Švec P.: Infuence of Magnetostriction on Cross-Sectional Magnetic Properties in Bilayered Ribbons. IEEE Trans. Magnetics 50 (2014) 6500804

Buršík J., Král P., Svoboda M., Dvořák J., Sklenička V.: Nanoindentation and microstructural study of Cu-Co alloys after severe plastic deformation. Key Eng. Mater. 592-593 (2014) 720-723

Jirásková Y., Buršík J., Turek I., Čížek J., Procházka I.: Structural and magnetic relaxations of mechanically alloyed Fe-Mo. J. Phys. D: Appl. Phys. 47 (2014) 435001

Buršík J., Buršíková V., Svoboda M., Král P., Dvořák J., Sklenička V.: Microstructure and local mechanical properties of Cu-Co alloys after severe plastic deformation. Key Eng. Mater. 586 (2014) 100-103

Žemlička R., Jílek M., Vogl P., Souček P., Buršíková V., Buršík J., Vašina P.: Understanding of hybrid PVD-PECVD process with aim of growing hard nc-TiC/a-C:H coatings using industrial devices with a rotating cylindrical magnetron. Surf. Coat. Technol. 255 (2014) 118-123

Mrázek J., Surýnek M., Bakardijeva S., Buršík J., Kašík I.: Synthesis and crystallization mechanism of europium-titanate Eu2Ti2O7. J. Cryst. Growth 391 (2014) 25-32

Souček P., Schmidtová T., Zábranský L., Buršíková V., Vašina P., Caha O., Buršík J., Peřina V., Mikšová R., Pei Y., De Hosson J.: On the control of mechanical properties of nc-TiC/a-C:H coatings. Surf. Coat. Technol. 255 (2014) 8-14

Sopoušek J., Vřešťál J., Pinkas J., Brož P., Buršík J., Stýskalík A., Škoda D., Zobač O., Lee J.: Cu-Ni nanoalloy phase diagram - Prediction and experiment. CALPHAD 45 (2014) 33-39

Zábranský L., Buršíková V., Souček P., Vašina P., Gardelka T., Sťahel P., Caha O., Peřina V., Buršík J.: Study of the thermal dependence of mechanical properties, chemical composition and structure of nanocomposite TiC/a-C:H coatings. Surf. Coat. Technol. 242 (2014) 62-67

Štrof J., Pavlů J., Wdowik U., Buršík J., Šob M., Vřešťál J.: Laves phases in the V-Zr system below room temperature: Stability analysis using ab initio results and phase diagram. CALPHAD 44 (2014) 62-69

Sopoušek J., Pinkas J., Brož P., Buršík J., Vykoukal V., Škoda D., Stýskalík A., Zobač O., Vřešťál J., Hrdlička A., Šimbera J.: Ag-Cu Colloid Synthesis: Bimetallic Nanoparticle Characterisation and Thermal Treatment. J. Nanomater. 2014 (2014) 638964



2013

Brož P., Khan A., Niu H., Chen X., Li D., Vřešťál J., Buršík J., Rogl P.: The system Ta-V-Si: Thermodynamic modeling. J. Solid State Chem. 199 (2013) 171-180

Malík Z., Grytsiv A., Rogl P., Giester G., Buršík J.: Phase relations and structural features in the system Ni-Zn-B. J. Solid State Chem. 198 (2013) 150-161

Životský O., Titov A., Jirásková Y., Buršík J., Kalbáčová D., Janickovic D., Švec P.: Full-scale magnetic, microstructural, and physical properties of bilayered CoSiB/FeSiB ribbons. J. Alloys Comp. 581 (2013) 685-692

Jirásková Y., Buršík J., Čížek J., Jančík D.: Solid-state reactions during mechanical milling of Fe-Al under nitrogen atmosphere. J. Alloys Comp. 568 (2013) 106-111

Životský O., Klimsa L., Hendrych A., Jirásková Y., Buršík J.: A New Phenomenon on the Surface of FINEMET Alloy. J. Supercond. Novel Magn. 26 (2013) 1349-1352

Jirásková Y., Buršík J., Turek I.: Nanostructure, Composition, and Magnetic Behavior of Mechanically Alloyed Fe-Mo. J. Supercond. Novel Magn. 26 (2013) 1717-1721

Jirásková Y., Hendrych A., Životský O., Buršík J., Žák T., Procházka I., Janičkovič D.: Surface magneto-optical and Mössbauer observations of Fe-Al. Appl. Surf. Sci. 276 (2013) 68-75



2012

Buršík J., Buršíková V., Pešina Z., Sopoušek J.: Mechanical properties and microstructure of model lead-free joints for electronics made with use of nanopowders. Chem. Listy 106 (2012) 390-392

Sopoušek J., Buršík J., Zálešák J., Pešina Z.: Silver nanoparticles sintering at low temperature on a copper substrate: in situ characterisation under inert atmosphere and air. J. Mining Metall. B 48 (2012) 63-71

Meduňa M., Růžička J., Caha O., Buršík J., Svoboda M.: Precipitation in silicon wafers after high temperature preanneal studied by X-ray diffraction methods. Physica B 407 (2012) 3002-3005

Životský O., Hendrych A., Klimsa L., Jirásková Y., Buršík J., Gómez J., Janickovic D.: Surface microstructure and magnetic behavior in FeSiB amorphous ribbons from magneto-optical Kerr effect. J. Magn. Magn. Mater. 324 (2012) 569-577

Meduňa M., Caha O., Buršík J.: Studies of influence of high temperature preannealing on oxygen precipitation in CZ Si wafers. J. Cryst. Growth 348 (2012) 53-59

Kratochvíl P., Dobeš F., Pešička J., Málek P., Buršík J., Vodičková V., Hanus P.: Microstructure and high temperature mechanical properties of Zr-alloyed Fe3Al-type aluminides: The effect of carbon. Mater. Sci. Eng. A 548 (2012) 175-182

Milcheva N., Brož P., Buršík J., Vassilev G.: Thermochemical and phase diagram studies of the Bi-Ni-Sn system. Thermochimica Acta 534 (2012) 41-50

Životský O., Jirásková Y., Hendrych A., Matějka V., Klimsa L., Buršík J.: Influence of Annealing Temperature and Atmosphere on Surface. IEEE Trans. Magnetics 48 (2012) 1367-1370

Souček P., Schmidtová T., Zábranský L., Buršíková V., Vašina P., Caha O., Jílek M., Mel A., Tessier P., Schäfer J., Buršík J., Peřina V., Mikšová R.: Evaluation of composition, mechanical properties and structure of nc-TiC/a-C:H coatings prepared by balanced magnetron sputtering. Surf. Coat. Technol. 211 (2012) 111-116

Khan A., Buršík J., Rogl P.: Phase relations and crystal structures in the system Ta-V-Ge. Dalton Trans. 41 (2012) 6206-6214

Souček P., Vřešťál J., Zemanová A., Buršík J.: Phase diagram prediction and particle characterization of Sn-Ag nano alloy for low melting point lead-free solders. J. Mining Metall. B 48 (2012) 419-425

Khan A., Brož P., Niu H., Buršík J., Grytsiv A., Chen X., Giester G., Rogl P.: The system Ta-V-Si: Crystal structure and phase equilibria. J. Solid State Chem. 187 (2012) 114-123

Zábranský L., Buršíková V., Buršík J., Vašina P., Souček P., Caha O., Jílek M., Peřina V.: Study of the indentation response of nanocomposite n-TiC/a-C:H coatings. Chem. Listy 106 (2012) 1508-1511



2011

Buršík J.: Modelling of hardness distribution curves obtained on two-phase materials by grid indentation technique. Chem. Listy 105 (2011) s660-s663

Jirásková Y., Buršík J., Tuček J.: Phase and microstructural analysis of hot rolled FeNi42 sheet, its response in magnetic and mechanical properties. Steel Res. Int. 82 (2011) 898-904

Stratil L., Hadraba H., Buršík J., Dlouhý I.: Comparison of microstructural properties and Charpy impact behaviour between different plates of the Eurofer97 steel and effect of isothermal ageing. J. Nucl. Mater. 416 (2011) 311-317

Buršíková V., Bláhová O., Karásková M., Zajíčková L., Jašek O., Franta D., Klapetek P., Buršík J.: Mechanical properties of ultrananocrystalline thin films deposited using dual frequency discharges. Chem. Listy 105 (2011) s98-s101

Priputen P., Černičková I., Kusý M., Llleková E., Švec P., Buršík J., Svoboda M., Dolinšek J., Janovec J.: A study of phase transformations in complex metallic alloys Al 73Mn23Pd4and Al73Mn 21Pd6. Key Eng. Mater. 465 (2011) 302-305

Buršík J.: Elastic parameters of various rafted structures of model Ni-base alloys. Key Eng. Mater. 465 (2011) 85-88

Caha O., Bernatová S., Meduňa M., Svoboda M., Buršík J.: Study of oxide precipitates in silicon using X-ray diffraction techniques. Phys. Stat. Sol. A 208 (2011) 2587-2590

Gandova V., Brož P., Buršík J., Vassilev G.: Thermochemical and phase diagram studies of the Sn-Zn-Ni system. Thermochimica Acta 524 (2011) 47-55

Khan A., Buršík J., Grytsiv A., Pomjakushin V., Effenberger H., Rogl P.: Crystal structure of t5-TiNi2-xAl5 (x = 0.48) and isotypic {Zr,Hf}Ni2-xAl5-y. Intermetallics 19 (2011) 1340-1347

Buršík J., Sopoušek J., Buršíková V., Stýskalík A., Škoda D.: Characterization of sintered Ag nanopowder joints using nanoindentation tests. Chem. Listy 105 (2011) s777-s778

Vašina P., Souček P., Schmidtová T., Eliáš M., Buršíková V., Jílek M., Jílek M., Schäfer J., Buršík J.: Depth profile analyses of nc-TiC/a-C:H coating prepared by balanced magnetron sputtering. Surf. Coat. Technol. 205 (2011) S53-S56

Sopoušek J., Buršík J., Zálešák J., Buršíková V., Brož P.: Interaction of silver nanopowder with copper substrate. Sci. Sintering 43 (2011) 33-38


ČísloNázev
8J19AT011 Half-Heuslerovy termoelektrické slitiny s vysokou entropií a s vysokou účinností
17-12844S Tepelná a fázová stabilita pokročilých termoelektrických materiálů
15-17875S Lokální mikrostrukturní změny vyvolané statickou a dynamickou indentací nanostrukturovaných a nanolaminovaných povlaků
7AMB15AT002 Spinodální rozpad v half-Heuslerových slitinách: nanostrukturní cesta k termoelektrikám s vysokou účinností
202/09/1013 Nukleace a růst kyslíkových precipitátů v křemíku
106/09/0700 Termodynamika a mikrostruktura nanopráškových pájek šetrných k životnímu prostředí
202/05/0607 Příprava uhlíkových mikro- a nanostruktur plazmovými technologiemi