Mgr. Milan Heczko, Ph.D.

---

Slone C., Mazánová V., Kumar P., Cook D., Heczko M., Yu Q., Crossman B., George E., Mills M., Ritchie R.: Partially recrystallized microstructures expand the strength-toughness envelope of CrCoNi medium-entropy alloy. Communications Materials 5 (2024) 263


Rosenkranz L., Lan ., Heczko M., Egan A., Mills M., Feuerbacher M., Glatzel U.: Microstructure evolution and twinning-induced plasticity (TWIP) in hcp rare-earth high- and medium-entropy alloys (HEAs and MEAs) due to tensile deformation. J. Appl. Phys. 136 (2024) 025101

---

Kloenne Z., Couzinié J., Heczko M., Gröger R., Viswanathan G., Clark W., Fraser H.: On the bcc/B2 interface structure in a refractory high entropy alloy. Scr. Mater. 223 (2023) 115071

---

Mazánová V., Heczko M., Polák J.: On the mechanism of fatigue crack initiation in high-angle grain boundaries. Int. J. Fatigue 158 (2022) 106721

---

Heczko M., George E., Mazánová V., Ghazisaeidi M., Slone C., Polák J., Shih M., Mills M.: Role of deformation twinning in fatigue of CrCoNi medium-entropy alloy at room temperature. Scr. Mater. 202 (2021) 113985

Vinogradov A., Kruml T., Heczko M., Mazánová V., Linderov M.: Kinetics of cyclically-induced mechanical twinning in gamma-TiAl unveiled by a combination of acoustic emission, neutron diffraction and electron microscopy. Acta Mater. 212 (2021) 116921

Heczko M., Mazánová V., Gröger R., Záležák T., Hooshmand M., George E., Mills M., Dlouhý A.: Elemental segregation to lattice defects in the CrMnFeCoNi high-entropy alloy during high temperature exposures. Acta Mater. 208 (2021) 116719

---

Que Z., Heczko M., Kuběna I., Seifert H., Spätig P.: Microstructural characterization of the synergic effects of dynamic strain ageing and hydrogen on fracture behaviour of low-alloy RPV steels in hightemperature water environments. Mater. Character. 165 (2020) 110405

Chlupová A., Poczklán L., Man J., Mazánová V., Heczko M., Kruml T.: Character of Fatigue Damage under Axial, Torsional and Biaxial Loading of 316L Stainless Steel. Defect Diffus. Forum 405 (2020) 264-270

Mazánová V., Heczko M., Slone C., Kuběna I., Tobiáš J., George E., Kruml T., Polák J., Mills M.: SEM & STEM Multi-scale Characterization of Fatigue Damage in CrCoNi Medium-entropy Alloy with Fully Recrystallized Microstructure. Microscopy and Microanalysis 26 (Supp (2020) 2224

Chlupová A., Heczko M., Obrtlík K., Dlouhý A., Kruml T.: Effect of heat-treatment on the microstructure and fatigue properties of lamellar gama-TiAl alloyed with Nb, Mo and/or C. Mater. Sci. Eng. A 786 (2020) 139427

---

Husák R., Hadraba H., Chlup Z., Heczko M., Kruml T., Puchý V.: ODS EUROFER Steel Strengthened by Y-(Ce, Hf, La, Sc, and Zr) Complex Oxides. Metals 9 (2019) 1148

Heczko M., Esser B., Gröger R., Feng L., Mazánová V., Wang Y., Mills M.: Structure, Morphology and Coarsening Behavior of MX (NbC) Nanoprecipitates in Fe-Ni-Cr Based Alloys. Microscopy and Microanalysis 25 (2019) 2612-2613

Mazánová V., Heczko M., Škorík V., Chlupová A., Polák J., Kruml T.: Microstructure and martensitic transformation in 316L austenitic steel during multiaxial low cycle fatigue at room temperature. Mater. Sci. Eng. A 767 (2019) 138407

---

Heczko M., Esser B., Smith T., Beran P., Mazánová V., McComb D., Kruml T., Polák J., Mills M.: Atomic resolution characterization of strengthening nanoparticles in a new high-temperature-capable 43Fe-25Ni-22.5Cr austenitic stainless steel. Mater. Sci. Eng. A 719 (2018) 49-60

Mazánová V., Heczko M., Polák J.: Fatigue crack initiation and growth in 43Fe-25Ni-22.5Cr austenitic steel at a temperature of 700°C. Int. J. Fatigue 114 (2018) 11-21

Wärner H., Calmunger M., Chai G., Polák J., Petráš R., Heczko M., Kruml T., Johansson S., Moverare J.: Fracture and Damage Behavior in an Advanced Heat Resistant Austenitic Stainless Steel During LCF, TMF and CF. Procedia Struct. Integr. 13 (2018) 843-848

Spätig P., Heczko M., Kruml T., Seifert H.: Influence of mean stress and light water reactor environment on fatigue life and dislocation microstructures of 316L austenitic steel. J. Nucl. Mater. 509 (2018) 15-28

Polák J., Mazánová V., Petráš R., Heczko M.: Early damage and fatigue crack initiation at ambient and elevated temperatures in heat resistant austenitic steel. MATEC Web Conf. 165 (2018) 04008

---

Polák J., Mazánová V., Heczko M., Petráš R., Kuběna I., Casalena L., Man J.: The role of extrusions and intrusions in fatigue crack initiation. Eng. Fract. Mech. 185 (2017) 46-60

Heczko M., Spätig P., Seifert H., Kruml T.: Correlation between Dislocation Structures and Mechanical Fatigue Response of 316L Austenitic Steel Loaded with and without Mean Stress at High Temperature in Air and Water Environment. Solid State Phenom. 258 (2017) 534-537

Polák J., Mazánová V., Heczko M., Kuběna I., Man J.: Profiles of persistent slip markings and internal structure of underlying persistent slip bands. Fatigue Fract. Eng. Mater. Struct. 40 (2017) 1101-1116

Mazánová V., Heczko M., Kuběna I., Polák J.: Surface Relief Formation in Relation to the Underlying Dislocation Arrangement. Solid State Phenom. 258 (2017) 526-529

Heczko M., Esser B., Smith T., Beran P., Mazánová V., Kruml T., Polák J., Mills M.: On the origin of extraordinary cyclic strengthening of the austenitic stainless steel Sanicro 25 during fatigue at 700 C. J. Mater. Res. 32 (2017) 4342-4353

Chlupová A., Heczko M., Obrtlík K., Beran P., Kruml T.: Effect of Alloying and Thermal Processing on Mechanical Properties of TiAl Alloys. Solid State Phenom. 258 (2017) 501-505

Heczko M., Polák J., Kruml T.: Microstructure and dislocation arrangements in Sanicro 25 steel fatigued at ambient and elevated temperatures. Mater. Sci. Eng. A 680 (2017) 168-181

---

Polák J., Mazánová V., Kuběna I., Heczko M., Man J.: Surface Relief and Internal Structure in Fatigued Stainless Sanicro 25 Steel. Metall. Mater. Trans. A 47A (2016) 1907-1911

Beran P., Heczko M., Kruml T., Panzner T., Petegem S.: Complex investigation of deformation twinning in gama-TiAl byTEM and neutron diffraction. J. Mech. Phys. Solids 95 (2016) 647-662

Chlupová A., Heczko M., Obrtlík K., Polák J., Roupcová P., Beran P., Kruml T.: Mechanical properties of high niobium TiAl alloys doped with Mo and C. Mater. & Design 99 (2016) 284-292

Polák J., Petráš R., Heczko M., Kruml T., Chai G.: Evolution of the cyclic plastic response of Sanicro 25 steel cycled at ambient and elevated temperatures. Int. J. Fatigue 83 (2016) 75-83

---

Polák J., Petráš R., Heczko M., Kuběna I., Kruml T., Chai G.: Low cycle fatigue behavior of Sanicro 25 steel at room and at elevated temperature. Mater. Sci. Eng. A 615 (2014) 175-182

Petrenec M., Vraspírová E., Němec K., Heczko M.: Effect of cyclic heat treatment on cast structure of TiAl alloy. Key Eng. Mater. 586 (2014) 222-225

Chlupová A., Obrtlík K., Beran P., Heczko M., Polák J., Kruml T.: Monotonic and cyclic properties of TiAl alloys doped with Nb, Mo and C. Procedia Eng. 74 (2014) 405-408

Beran P., Petrenec M., Heczko M., Smetana B., Žaludová M., Šmíd M., Kruml T., Keller L.: In-situ neutron diffraction study of thermal phase stability in a gamma-TiAl based alloy doped with Mo and/or C. Intermetallics 54 (2014) 28-38

Polák J., Petráš R., Heczko M., Kruml T., Chai G.: Analysis of Cyclic Plastic Response of Heat Resistant Sanicro 25 Steel at Ambient and Elevated Temperatures. Procedia Eng. 74 (2014) 68-73

Číslo	Název
24-11058M	Design a optimalizace 3D tisknutelných slitin s více hlavními prvky zpevněných oxidickou disperzí pro extrémní prostředí