2025
2024
Bancerz P., Katzer J., Miarka P.: Case study of fiber reinforced, lightweight concrete, intended for production of precast elements. Case Studies in Construction Materials 21 (2024) e03755
Seitl S., Al Khazali M., Malíková (Šestáková) L.: Appropriate cumulative fatigue damage models for fatigue life estimation applied to high-strength steels. Kovové materiály 62 (2024) 41-51
Klusák J., Fintová S., Kozáková K., Jambor M., Seitl S.: Risk volume effect in very high cycle fatigue of 304L stainless steel. Int. J. Fatigue 178 (2024) 108016
Kozáková K., Klusák J., Fintová S.: The length parameter for gigacycle fatigue life predictions of notched specimens made of 304L steel. Int. J. Fatigue 178 (2024) 107980
Miarka P., Kytýř D., Koudelka P., Bílek V.: Damage Localisation in Fresh Cement Mortar Observed via In Situ (Timelapse) X-ray micro-CT imaging.. Cement and Concrete Composites 154 (2024) 105736
Doubek P., Kozáková K., Kunz L., Seitl S.: Fatigue life of S960 high strength steel with laser cladded functional surface layers. Eng. Fail. Anal. 164 (2024) 108629
Kozáková K., Klusák J.: Fatigue lifetime predictions of notched specimens based on the critical distance and stress concentration factors. Theor. Appl. Fract. Mech. 133 (2024) 104579
Malíková (Šestáková) L., Miarka P.: Fatigue crack propagation near a corrosion pit in a HSS specimen. Theor. Appl. Fract. Mech. 129 (2024) 104214
2023
Katzer J., Skoratko A., Seitl S.: Properties of steel fiber reinforced mortar-plastic columns with the cross-section in a form of a Cesaro fractal. Structural Concrete 1 (2023) 1-12
Malíková (Šestáková) L., Doubek P., Juhászová T., Krejsa M., Seitl S.: Fatigue crack propagation under corrosion of high-strength steel. Procedia Struct. Integr. 43 (2023) 264-269
Miarka P., Seitl S., Klusák J., Malíková (Šestáková) L., Merta I., Bílek V.: High-cycle fatigue cracks in concrete investigated by micro cT tomography.. Procedia Struct. Integr. 43 (2023) 124-129
Miarka P., Cruces A., Lopez-Crespo P., De Corte W.: Fracture process zone development and length assessment under the mixed-mode I/II load analysed by digital image correlation technique. Cement and Concrete Research 173 (2023) 1-22
Sarkar A., Klusák J., Kozáková K., Christ H.: Very high cycle fatigue behavior of austenitic stainless steel in annealed and predeformed condition. Materials Performance and Characterization 12 (2023) 78-92
Seitl S., Horník V., Lesiuk G., Kunz L.: Influence of micro-structure of selected components made from AISI 304 on the mechanical properties. Procedia Struct. Integr. 43 (2023) 113-118
Gruber K., Szymczyk-Ziołkowska P., Dziuba S., Duda S., Zielonka P., Seitl S., Lesiuk G.: Fatigue crack growth characterization of Inconel 718 after additive manufacturing by laser powder bed fusion and heat treatment. Int. J. Fatigue 166 (2023) 107287
Juhászová T., Miarka P., Jindra D., Kala Z., Seitl S.: Evaluation of fatigue crack growth rates in an IPE beam made of AISI 304 under various stress ratios. Procedia Struct. Integr. 43 (2023) 172-177
Doubek P., Malíková (Šestáková) L., Miarka P., Seitl S.: Laser cladded protective layer on the S960 change of microhardness in the vicinity of the bi-material interface. Procedia Struct. Integr. 43 (2023) 101-106
Bílek V., Souček K., Khestl F., Bujdoš D., Seitl S.: Mechanical and fracture parameters of concretes with different water to cement ratio in two different conditions of curing. Procedia Struct. Integr. 43 (2023) 107-112
Kozáková K., Klusák J.: Prediction of the fatigue life of notched specimens: The influence of the surface quality produced by machining. Procedia Struct. Integr. 43 (2023) 178-183
Klusák J., Kozáková K., Jambor M., Seitl S.: Fatigue behavior of DIN 1.4307 and DIN 1.4306 stainless steels under high frequency loading. Procedia Struct. Integr. 43 (2023) 142-147
Vyhlídal M., Klusák J., Kucharczyková B., Daněk P., Šimonová H., Keršner Z.: Influence of the interfacial transition zone between a steel inclusion and cement-based composite on the fracture response of a bent specimen. Eng. Fract. Mech. 286 (2023) 109256
Miarka P., Cruces A., Lopez-Crespo P., De Corte W.: On the localisation of the FPZ under a pure mode II load identified by a hybrid method. Eng. Fract. Mech. 279 (2023) 109019
2022
Seitl S., Pokorný P., Benešová A., Juhászová T., Kala Z.: Variance of selected properties from various structural elements made from AISI 304. Trans. VSB TU Ostrava Ser. 22 (2022) 39-44
Kozáková K., Fintová S., Klusák J.: Fatigue life of notches: an effect of manufacturing. Procedia Struct. Integr. 42 (2022) 270-275
Kozáková K., Klusák J.: Fracture mechanics assessment of notches subjected to very high-cycle fatigue loading. Structural. Integr. 24 (2022) 299-305
Seitl S., Benešová A., Paredes Pascual Á., Malíková (Šestáková) L., Bujdoš D., Bílek V.: Fatigue and fracture properties of concrete mixtures with various water to cement ratio and maximum size of aggregates. Procedia Struct. Integr. 42 (2022) 1512-1519
Malíková (Šestáková) L., Miarka P., Doubek P., Seitl S.: Influence of the interphase between laser-cladded metal layer and steel substrate on the fatigue propagation of a short edge crack. Frattura ed Integrita Strutturale 59 (2022) 514-524
Juhászová T., Miarka P., Jindra D., Kala Z., Seitl S.: Comparison of crack propagation rates in selected structural components made from AISI 304 grades: Three-point bending test. Procedia Struct. Integr. 42 (2022) 1090-1097
Blasón Gonzáles S., Werner T., Kruse J., Madia M., Miarka P., Seitl S., Benedetti M.: Determination of fatigue crack growth in the near-threshold regime using small-scale specimens. Theor. Appl. Fract. Mech. 118 (2022) 103224
Doubek P., Malíková (Šestáková) L., Seitl S.: Analysis of the material properties in the vicinity of bi-material interface made by the laser cladded protective layer on the S960. Procedia Struct. Integr. 42 (2022) 1529-1536
Miarka P., Seitl S., Bílek V., Cifuentes Bulte H.: Assessment of fatigue resistance of concrete: S-N curves to the Paris law curves. Construction and Building Materials 341 (2022) 127811
Vyhlídal M., Klusák J.: Numerical study of specimen with steel inclusion: Influence of interfacial transition zone. Procedia Struct. Integr. 42 (2022) 1000-1007
Malíková (Šestáková) L., Doubek P., Juhászová T., Seitl S.: Fracture Parameters of a Perpendicular Crack With its Tip Close to a Corrosion Pit. Trans. VSB TU Ostrava Ser. 22 (2022) 30-34
Klusák J., Kopp D.: The role of the surface in crack initiation in sharp and bi-material notches. Structural. Integr. 24 (2022) 315-321
Seitl S., Pokorný P., Klusák J., Duda S., Lesiuk G.: Effect of specimen thickness on fatigue crack growth resistance in Paris region in AISI 304 steel. Structural. Integr. 24 (2022) 291-297
Malíková (Šestáková) L., Doubek P., Juhászová T., Klusák J., Seitl S.: Interaction of a fatigue crack and a corrosion dimple in a high-strength steel specimen. Procedia Struct. Integr. 42 (2022) 1082-1089
Klusák J., Kozáková K., Fintová S., Seitl S.: Fatigue lifetimes of 1.4306 and 1.4307 stainless steels subjected to ultrasonic loading. Procedia Struct. Integr. 42 (2022) 1369-1375
Seitl S., Benešová A., Blasón Gonzáles S., Miarka P., Klusák J., Bílek V.: Advanced statistical evaluation of fatigue data obtained during the measurement of concrete mixtures with various water-cement ratio. Engineering mechanics 2022 1 (2022) 361-364
2021
Braet L., Juhászová T., Jindra D., Miarka P., Seitl S.: Finding the optimal stress state of a stainless-steel IPE profile for fatigue experiments. Procedia Struct. Integr. 33 (2021) 1065-1072
Juhászová T., Malíková (Šestáková) L., Doubek P., Miarka P., Seitl S.: Fatigue behaviour of a short crack in a thin protective layer laser-cladded on a steel substrate. Trans. VSB TU Ostrava Ser. 21 (2021) 25-28
Seitl S., Andrade Lizarro J., Miarka P.: Mixed Mode I/II Fracture Resistance of Various Civil Engineering Materials by Selected Criteria. Procedia Struct. Integr. 33 (2021) 312-319
Juhászová T., Miarka P., Seitl S.: Non-traditional geometry for wedge-splitting test. Trans. VSB TU Ostrava Ser. 21 (2021) 1-5
Klusák J., Horník V., Lesiuk G., Seitl S.: Comparison of high- and low-frequency fatigue properties of structural steels S355J0 and S355J2. Fatigue Fract. Eng. Mater. Struct. 44 (2021) 3202-3213
Malíková (Šestáková) L., Miarka P., Kucharczyková B., Šimonová H.: Williams expansion utilized for assessment of crack behaviour under mixed-mode loading in alkali-activated fine-grained composite. Fatigue Fract. Eng. Mater. Struct. 44 (2021) 1151-1161
Kozáková K., Klusák J.: The Prediction of Fatigue Life of Notched Specimens. Trans. VSB TU Ostrava Ser. 21 (2021) 29-35
Malíková (Šestáková) L., Miarka P., Doubek P., Seitl S.: Influence of the bi-material interface on the crack propagation through a thin protective layer. Procedia Struct. Integr. 33 (2021) 605-612
Fernandéz G., Miarka P., Seitl S.: Influence of thickness on the values of stress intensity factor in compact tension specimen. Trans. VSB TU Ostrava Ser. 2021 (2021) 54-59
Lopez-Crespo C., Cruces A., Seitl S., Moreno B., Lopez-Crespo P.: Estimation of the Plastic Zone in Fatigue via Micro-Indentation. Materials 14 (2021) 5885
Jindra D., Kala Z., Kala J., Seitl S.: Experimental and Numerical simulation of a Three Point Bending Test of a Stainless Steel Beam. Transportation Research Procedia 55 (2021) 1114-1121
Klusák J., Kopp D.: 3D assessment of surface influence on crack initiation in sharp notches under a mixed mode of loading. Theor. Appl. Fract. Mech. 112 (2021) 102920
Malíková (Šestáková) L., Doubek P., Miarka P., Seitl S.: Crack behaviour at the interface of a surface layer applied ona steel substrate by laser cladding. IOP Conference Series: Materials Science and Engineering 1209 (2021) 12049
2020
Malíková (Šestáková) L., Miarka P., Šimonová H.: Mixed-mode crack propagation in a semi-circular disc under bending made of an environmental-friendly concrete. Procedia Struct. Integr. 28 (2020) 403-410
Lehner P., Pařenica P., Krejsa M., Křivý V., Brožovský J., Seitl S., Kala Z.: The general procedure of numerical analysis related to a fatigue damage on the cyclically loaded construction. MATEC Web Conf. 310 (2020) 16
Miarka P., Seitl S., Horňáková M., Lehner P., Konečný P., Sucharda O., Bílek V.: Influence of chlorides on the fracture toughness and fracture resistance under the mixed mode I/II of high-performance concrete . Theor. Appl. Fract. Mech. 110 (2020) 102812
Jambor M., Trško L., Klusák J., Fintová S., Kajánek D., Nový F., Bokůvka O.: Effect of Severe Shot Peening on the Very-High Cycle Notch Fatigue of an AW 7075 Alloy. Metals 10 (2020) 1262
Miarka P., Cruces A., Seitl S., Malíková (Šestáková) L., Lopez-Crespo P.: Influence of the constraint effect on the fatigue crack growth rate in S355 J2 steel using digital image correlation. Fatigue Fract. Eng. Mater. Struct. 43 (2020) 1703-1718
Seitl S., Pokorný P., Miarka P., Klusák J., Kala Z., Kunz L.: Comparison of fatigue crack propagation behaviour in two steel grades S235, S355 and a steel from old crane way. MATEC Web Conf. 310 (2020) 34
Miarka P., Cruces A., Seitl S., Malíková (Šestáková) L., Lopez-Crespo P.: Evaluation of the SIF and T-stress values of the Brazilian disc with a central notch by hybrid method . Int. J. Fatigue 135 (2020) 105562
Vyhlídal M., Klusák J.: A crack approaching the edge of the aggregate. Trans. VSB TU Ostrava Ser. 20 (2020) 47-52
Seitl S., Miarka P., Rozsypalová I., Pokorná K., Keršner Z., Katzer J., Zarzycki P.: Mechanical fracture properties of concrete with lunar aggregate simulant. MATEC Web Conf. 323 (2020) 01014
Miarka P., Pan L., Bílek V., Seitl S., Cifuentes Bulte H.: Influence of the chevron notch type on the values of fracture energy evaluated on alkali-activated concrete. Eng. Fract. Mech. 236 (2020) 107209
Seitl S., Miarka P., Bílek V.: Fatigue and fracture mechanical properties of selected concrete for subtle precast structural elements. MATEC Web Conf. 310 (2020) 33
2019
Seitl S., Miarka P., Šimonová H., Frantík P., Keršner Z., Domski J., Katzer J.: Change of Fatigue and Mechanical Fracture Properties of a Cement Composite due to Partial Replacement of Aggregate by Red Ceramic Waste. Periodica Polytechnica-Civil Engineering 63 (2019) 152-159
Kala Z., Omishore A., Seitl S., Krejsa M., Kala J.: Identification of variation coefficient of equivalent stress range of steel girders with cracks. Int. J. Mechanics 13 (2019) 69-78
Seitl S., Miarka P., Pokorný P., Fintová S., Kunz L.: COMPARISON OF MECHANICAL PROPERTIES OF OLD STEEL FROM TRUSS CRANE RUNWAY WITH S235 AND S355 GRADES. Trans. VSB TU Ostrava Ser. 19 (2019) 56-60
Seitl S., Miarka P., Pokorný P., Klusák J.: Influence of corrosion on fatigue behaviour of old crane runway steel. J. Strain Anal. for Engin. Design 54 (2019) 416-423
Klusák J., Krepl O., Profant T.: An easy and engineering stability criterion of general singular stress concentrators. Theor. Appl. Fract. Mech. 104 (2019) 102341
Vyhlídal M., Klusák J.: The influence of polygonal cavity on fracture behaviour of concrete. Procedia Struct. Integr. 17 (2019) 690-697
Ríos J., Cifuentes Bulte H., Leiva C., Seitl S.: Analysis of the mechanical and fracture behavior of heated ultra-high-performance fiber-reinforced concrete by X-ray computed tomography. Cement and Concrete Research 119 (2019) 77-88
Miarka P., Seitl S., Bílek V.: Mixed-mode fracture analysis in high-performance concrete using a Brazilian disc test. Mater. Technol. 53 (2019) 233-238
Seitl S., Růžička V., Miarka P., Sobek J.: ANALYSIS OF VARIOUS CHEVRON NOTCH TYPES AND ITS INFLUENCE ON THE LIGAMENT AREA. Trans. VSB TU Ostrava Ser. 19 (2019) 28-34
Profant T., Hrstka M., Klusák J.: An asymptotic analysis of crack initiation from an interfacial zone surrounding the circular inclusion. Composite Struct. 208 (2019) 479-497
Profant T., Hrstka M., Klusák J.: Microcrack interaction with circular inclusion and interfacial zone. Frattura ed Integrita Strutturale 48 (2019) 503-512
Malíková (Šestáková) L., Miarka P., Šimonová H.: Crack propagation in mixed-mode specimens described via multi-parameter fracture mechanics. IOP Conf. Ser.: Mater. Sci. Eng. 629 (2019) 012013
Seitl S., Miarka P., Růžička V., Malíková (Šestáková) L., Cruces A., Lopez-Crespo P.: Approximation of the crack-tip field in fatigue cracks in bridge steel specimens: DIC analysis of different constraint levels. Frattura ed Integrita Strutturale 49 (2019) 97-106
Krepl O., Klusák J.: Multi-parameter failure assessment of a bi-material V-notch-Crack initiation from a free-edge singularity. Theor. Appl. Fract. Mech. 100 (2019) 233-241
Klusák J., Seitl S.: Very high cycle fatigue tests of high strength steels S355 J0 and S355 J2. Procedia Struct. Integr. 17 (2019) 576-581
Ríos J., Leiva C., Ariza M., Seitl S., Cifuentes Bulte H.: Analysis of the tensile fracture properties of ultra-high-strength fiber-reinforced concrete with different types of steel fibers by X-ray tomography. Mater. & Design 165 (2019) 107582
Miarka P., Seitl S., De Corte W.: Notch tip displacements of the concrete Brazilian disc test with central notch analysed by the concrete damaged plasticity model. Theor. Appl. Fract. Mech. 102 (2019) 122-150
Malíková (Šestáková) L., Šimonová H., Kucharczyková B., Miarka P.: Multi-parameter fracture mechanics: crack path in a mixed-mode specimen. Frattura ed Integrita Strutturale 49 (2019) 65-73
Krejsa M., Koktan J., Janas P., Brožovský J., Seitl S., Kala Z., Krejsa V.: Parallelization in DOProC method and its using in probabilistic modelling of fatigue problems. AIP Conference Proceedings 2116 (2019) 120007
2018
Miarka P., Seitl S., Bílek V.: Comparison of Fracture Resistance of the Normal and High Strength Concrete Evaluated by Brazilian Disc Test. Proceedings 2 (2018) 1-6
Malíková (Šestáková) L., Klusák J.: Multi-Parameter Fracture Mechanics: Crack Approaching a Bi-Material Interface. Key Eng. Mater. 784 (2018) 79-84
Seitl S., Miarka P., Klusák J., Kala Z., Krejsa M., Blasón Gonzáles S., Canteli A.: Evaluation of fatigue properties of S355 J0 steel using ProFatigue and ProPagation software. Procedia Struct. Integr. 13 (2018) 1494-1501
Malíková (Šestáková) L., Razavi S., Berto F.: Crack propagation in a brittle DCB specimen assessed by means of the Williams power expansion. Frattura ed Integrita Strutturale 48 (2018) 34-41
Klusák J., Krepl O.: Multi-parameter average strain energy density factor criterion applied on the bi-material notch problem. Procedia Struct. Integr. 13 (2018) 1261-1266
Seitl S., Miarka P., Kala Z.: Geometry functions for edge cracks in steel bridge under three- and four- point bending with various span. Trans. VSB TU Ostrava Ser. 18 (2018) 44-49
Seitl S., Miarka P., Merta I., Keršner Z.: Numerical Stress Analysis of the Biaxial Tension-Compression Wedge-Splitting Test in Vicinity of the Crack Tip. Key Eng. Mater. 784 (2018) 85-90
Seitl S., Miarka P., Bílek V.: The Mixed-Mode Fracture Resistance of C 50/60 and its Suitability for Use in Precast Elements as Determined by the Brazilian Disc Test and Three-Point Bending Specimens. Theor. Appl. Fract. Mech. 97 (2018) 108-119
Krejsa M., Brožovský J., Lehner P., Seitl S., Kala Z.: Stochastic analysis for short edge cracks under selected loads. AIP Conference Proceedings 1978 (2018) 150006-1-150006-4
Seitl S., Miarka P., Pokorný P., Fintová S., Klusák J.: Influence of Micro-Structure on the Fatigue Crack Propagation in Bridge Steel. Proceedings 2 (2018) 1-6
Krepl O., Klusák J.: Multi-parameter average strain energy density factor criterion applied on the sharp material inclusion problem. Procedia Struct. Integr. 13 (2018) 1279-1284
Seitl S., Miarka P., Růžička V., Malíková (Šestáková) L., Merta I.: Wedge splitting test: displacement field analysis by multi-parameter fracture mechanics. Trans. VSB TU Ostrava Ser. 18 (2018) 50-55
Malíková (Šestáková) L., Klusák J.: Influence of the Interfacial Transition Zone on crack behavior in a matrix/aggregate system. Procedia Struct. Integr. 13 (2018) 1798-1803
Seitl S., Miarka P., Klusák J., Fintová S., Kunz L.: Comparison of the Fatigue Crack Propagation Rates in S355 J0 and S355 J2 Steel Grades. Key Eng. Mater. 784 (2018) 91-96
Seitl S., Malíková (Šestáková) L., Růžička V., Moreno B., Lopez-Crespo P.: Williams' expansion-based approximation of the displacement field in an Al 2024 compact tension specimen reconstructed from optical measurements. Fatigue Fract. Eng. Mater. Struct. 41 (2018) 2187-2196
2017
Seitl S., Malíková (Šestáková) L., Sobek J., Frantík P., Lopez-Crespo P.: Williams expansion-based approximation of the stress field in an Al 2024 body with a crack from optical measurements. Defect Diffus. Forum 41 (2017) 323-331
Růžička V., Malíková (Šestáková) L., Seitl S.: Over-deterministic method: The influence of rounding numbers on the accuracy of the values of Williams' expansion terms. Frattura ed Integrita Strutturale 42 (2017) 128-135
Seitl S., Miarka P., Malíková (Šestáková) L., Krejsa M.: Comparison of calibration functions for short edge cracks under selected loads. Key Eng. Mater. 754 (2017) 353-356
Seitl S., Ríos J., Cifuentes Bulte H.: Comparison of fracture toughness values of normal and high strength concrete determined by three point bend and modified disk-shaped compact tension specimens. Frattura ed Integrita Strutturale 42 (2017) 67-76
Šimonová H., Vyhlídal M., Kucharczyková B., Bayer P., Keršner Z., Malíková (Šestáková) L., Klusák J.: Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement-based composites. Frattura ed Integrita Strutturale 41 (2017) 211-219
Krepl O., Klusák J.: The influence of non-singular terms on the precision of stress description near a sharp material inclusion tip. Theor. Appl. Fract. Mech. 90 (2017) 85-99
Klon J., Sobek J., Malíková (Šestáková) L., Seitl S.: Impact of specific fracture energy investigated in front of the crack tip of three-point bending specimen. Frattura ed Integrita Strutturale 41 (2017) 189-196
Krepl O., Klusák J.: Crack onset assessment near the sharp material inclusion tip by means of modified maximum tangential stress criterion. Frattura ed Integrita Strutturale 42 (2017) 66-73
Malíková (Šestáková) L., Klusák J.: Interaction between edge-crack and aggregate in silicate-based composite. Trans. VSB TU Ostrava Ser. 17 (2017) 59-64
De Corte W., Helincks P., Boel V., Klusák J., Seitl S., De Schutter G.: Generalised fracture mechanics approach to the interfacial failure analysis of a bonded steel-concrete joint. Frattura ed Integrita Strutturale 42 (2017) 147-160
Malíková (Šestáková) L., Klusák J., Keršner Z.: Assessment of Crack Stability in a Quasi-brittle Particle Composite. Procedia Eng. 190 (2017) 49-53
Malíková (Šestáková) L., Seitl S.: Application of the Williams Expansion near a Bi-Material Interface. Key Engineering Materials 754 (2017) 206-209
2016
Krepl O., Klusák J., Profant T.: Analytical-Numerical Determination of Stress Distribution around a Tip of Polygon-Like Inclusion. Key Eng. Mater. 713 (2016) 94-98
Malíková (Šestáková) L., Veselý V., Seitl S.: Crack propagation direction in a mixed mode geometry estimated via multi-parameter fracture criteria. Int. J. Fatigue 89 (2016) 99-107
Krepl O., Klusák J.: Reconstruction of a 2D stress field around the tip of a sharp material inclusion. Procedia Struct. Integr. 2 (2016) 1920-1927
Klusák J., Krepl O., Profant T.: Behaviour of a crack in a corner or at a tip of a polygon-like particle. Procedia Struct. Integr. 2 (2016) 1912-1919
2015
Majer Z., Náhlík L., Malíková (Šestáková) L.: Particulate composite damage: The influence of particle shape on crack path. Key Eng. Mater. 662 (2015) 77-80
Veselý V., Bedáň J., Sobek J., Seitl S.: Work of fracture due to compressive component of loading in wedge splitting test on quasi-brittle cementitious specimens. Key Eng. Mater. 627 (2015) 317-320
Veselý V., Sobek J., Tesař D., Frantík P., Pail T., Seitl S.: Multi-parameter approximation of stress field in a cracked specimen using purpose-built Java applications. Frattura ed Integrita Strutturale 33 (2015) 120-133
Seitl S., Merta I., Veselý V.: Wedge splitting test of foam concrete specimens: Calibration curves. Key Eng. Mater. 627 (2015) 281-284
Veselý V., Frantík P., Sobek J., Malíková (Šestáková) L., Seitl S.: Multi-parameter crack-tip stress state description for evaluation of nonlinear zone width in silicate composite specimens in component splitting/bending test geometry. Fatigue Fract. Eng. Mater. Struct. 38 (2015) 200-214
2014
Seitl S., Bermejo R., Sobek J., Veselý V.: Two Parameter Description of Crack Tip Stress Fields for Wedge Splitting Test Specimen: Influence of Wedge Angle. Adv. Mater. Res. 969 (2014) 345-350
Seitl S., Klusák J., Fernández P., Canteli A.: Thermographic determination methodology: Application on fatigue limit of AL 2024 for R=-1. Key Eng. Mater. 577-578 (2014) 477-480
Fernández-Canteli A., Castanón L., Nieto B., Lozano M., Holušová T., Seitl S.: Determining fracture energy parameters of concrete from the modified compact tension test. Frattura ed Integrita Strutturale 30 (2014) 383-393
Malíková (Šestáková) L., Veselý V.: Application of multi-parameter fracture mechanics to study of crack propagation angle in selected mixed-mode geometry. Key Eng. Mater. 592-593 (2014) 209-212
Seitl S., Bílek V., Keršner Z.: Comparison of Fatigue parameters of Alkali-Activated and ordinaly portland cement based concretes. Int. J. Res. Eng. Technol. 3 (2014) 203-208
Malíková (Šestáková) L.: Detailed crack-tip stress field description in a specimen subjected to mixed-mode loading. Key Eng. Mater. 577-578 (2014) 317-320
Profant T., Klusák J., Ševeček O., Kotoul M., Hrstka M., Marcián P.: An effect of the first non-singular term of the Williams asymptotic expansion to the stability of the bi-material orthotropic notch. Key Eng. Mater. 592-593 (2014) 745-748
Klusák J., Hrstka M., Profant T., Krepl O., Ševeček O., Kotoul M.: The influence of the first non-singular stress terms on crack initiation direction in an orthotropic bi-material plate. Theor. Appl. Fract. Mech. 71 (2014) 67-75
Seitl S., Klusák J., Fernández P., Canteli A.: Evaluation of conventional Al 2024 fatigue limit in fatigue test using thermographic measurement: Effect of frequency. Adv. Mater. Res. 891-892 (2014) 1308-1313
Klusák J., Kopp D., Profant T.: Bi-material notches under various normal-shear loading modes. Key Eng. Mater. 577-578 (2014) 361-364
Veselý V., Sobek J., Frantík P., Štafa M., Malíková (Šestáková) L., Seitl S.: Estimation of the zone of failure extent in quasi-brittle specimens with different crack-tip constraint conditions from stress field. Key Eng. Mater. 592-593 (2014) 262-265
Holušová T., Seitl S., Fernández-Canteli A.: Comparison of fracture energy values obtained from 3PB, WST and CT test configurations. Adv. Mater. Res. 969 (2014) 89-92
Seitl S., Nieto B., Merta I.: Wedge splitting test method: Quantifi-cation of influence of blues marble plates by two-parameter fracture mechanics. Frattura ed Integrita Strutturale 30 (2014) 174-181
Malíková (Šestáková) L.: Using the multi-parameter fracture mechanics for more accurate description of stress/displacement crack tip fields. Key Eng. Mater. 586 (2014) 237-240
2013
Profant T., Klusák J., Ševeček O., Hrstka M., Kotoul M.: An energetic criterion for a micro-crack of finite length initiated in orthotropic bi-material notches. Eng. Fract. Mech. 110 (2013) 396-409
Ševčík M., Hutař P., Náhlík L., Seitl S.: The effect of constraint level on a crack path. Engineering Failure Analysis. Eng. Fail. Anal. 29 (2013) 83-92
Veselý V., Sobek J., Malíková (Šestáková) L., Seitl S.: Accurate description of near-crak-tip fields for the estimation of inelastic zone extent in quasi-brittle materials. Key Eng. Mater. 525-526 (2013) 529-532
Klusák J., Helincks P., Seitl S., De Corte W., Boel V., De Schutter G.: The influence of the epoxy interlayer on the assessment of failure conditions of push-out test specimens. Key Eng. Mater. 525-526 (2013) 61-64
Profant T., Klusák J., Ševeček O., Kotoul M.: On the direction of a crack initiated from an orthotropic bi-material notch composed of materials with non-uniform fracture mechanics properties. Key Eng. Mater. 525-526 (2013) 545-548
Klusák J., Profant T., Knésl Z., Kotoul M.: The influence of discontinuity and orthotropy of fracture toughness on conditions of fracture initiation in singular stress concentrators. Eng. Fract. Mech. 110 (2013) 438-447
Veselý V., Sobek J., Malíková (Šestáková) L., Frantík P.: Multi-parameter crack tip stress state description for estimation of fracture process zone extent in silicate composite WST specimen. Frattura ed Integrita Strutturale 25 (2013) 69-78
Helincks P., De Corte W., Klusák J., Boel V., De Schutter G.: Experimental investigation of the influence of the bond conditions on the shear bond strength between steel and self- compacting concrete using push-out tests. Key Eng. Mater. 525-526 (2013) 205-208
2012
Klusák J., Seitl S., De Corte W., Helincks P., Boel V., De Schutter G.: Failure conditions from push out tests of a steel-concrete joint: fracture mechanics approach. Key Eng. Mater. 488-489 (2012) 710-713
Klusák J., Profant T., Kotoul M.: Conditions for crack initiation in an orthotropic bi-material notch. Mech. Adv. Mat. Struct. 19 (2012) 302-307
Šimonová H., Keršner Z., Seitl S., Pryl D., Pukl R.: Correction of fatigue parameters of concrete using approximation of mechanical-Fracture parameters in time. Concrete 1 (2012) 57-59
Veselý V., Šestáková L., Seitl S.: Influence of boundary conditions on Higher order terms of near-crack-tip stress field in a WST specimen. Key Eng. Mater. 488-489 (2012) 399-402
Helincks P., De Corte W., Klusák J., Seitl S., Boel V., De Schutter G.: Failure conditions from push-out tests of a steel-concrete joint: experimental results. Key Eng. Mater. 488-489 (2012) 714-717
Klusák J., Profant T., Ševeček O., Kotoul M.: Crack propagation from bi-material notches - matched asymptotic procedure. Key Eng. Mater. 488-489 (2012) 416-419
Kunz L., Lukáš P., Klusák J.: Fatigue Strength of Weathering Steel. Mater. Sci. 18 (2012) 18-22
Řoutil L., Veselý V., Seitl S.: Fracture analysis of cube- and cylinder - shaped WST specimen made of cementitious composites with various characteristic length. Key Eng. Mater. 488-489 (2012) 533-536
Korbel J., Zant N., Klusák J., Knésl Z.: Fracture analysis of epoxy-aluminum spacers exposed to pressure loads. Theor. Appl. Fract. Mech. 64 (2012) 244-247
2011
Profant T., Klusák J., Kotoul M.: On the Crack Initiated From the Bi-material Notch Tip. Key Eng. Mater. 452-453 (2011) 441-444
Kruml T., Hutař P., Náhlík L., Seitl S., Polák J.: Fatigue cracks in Eurofer 97 steel: Part II. Comparison of small and long fatigue crack growth. J. Nucl. Mater. 412 (2011) 7-12
Hutař P., Náhlík L., Ševčík M., Seitl S., Kruml T., Polák J.: Fatigue crack propagation rate in EUROFER 97 estimated using small specimens. Key Eng. Mater. 452-453 (2011) 325-328
Seitl S., Klusák J., Veselý V., Řoutil L.: Wedge-Splitting Test - Determination of Minimal Starting Notch Length for Various Cement Based Composites Part II: Crack and Notch Fracture Mechanics Approaches. Key Eng. Mater. 452-453 (2011) 81-84
Pryl D., Pukl R., Seitl S., Keršner Z.: Poškozování betonu cyklickým tahovým zatížením - experiment a model/ Damage of concrete under cyclic tensile load - experiment and model. Beton 2 (2011) 48-51
Profant T., Klusák J., Kotoul M.: Case Criterion of Crack Onset in Orthotropic Bi-material Notches. Key Eng. Mater. 465 (2011) 157-160
Klusák J., Knésl Z.: Case Study of Crack Initiation from Bi-material Notches. Key Eng. Mater. 452-453 (2011) 449
Malíková (Šestáková) L., Bermejo R., Chlup Z., Danzer R.: Strategies for fracture toughness, strength and reliability optimisation of ceramic-ceramic laminates. Int. J. Mater. Res. 102 (2011) 613-626
Veselý V., Řoutil L., Seitl S.: Wedge-Splitting Test - Determination of Minimal Starting Notch Length for Various Cement Based Composites. Part I: Cohesive Crack Modelling. Key Eng. Mater. 452-453 (2011) 77-80
Seitl S., Fernández-Zúniga D., Fernández-Canteli A.: Using a tensor model for analyzing some aspects of mode-II loading. Appl. Comput. Mech. 5 (2011) 55-66
Seitl S., Veselý V., Řoutil L.: Two-parameter fracture mechanical analysis of a near-crack-tip stress field in wedge splitting test specimens. Computers & Structures 89 (2011) 1852-1858
2010
Klusák J., Profant T., Kotoul M.: Determination of the threshold values of orthotropic bi-material notches. Procedia Eng. 2 (2010) 1635-1642
Klusák J., Knésl Z.: Reliability assessment of a bi-material notch: Strain energy density factor approach. Theor. Appl. Fract. Mech. 53 (2010) 89-93
2007
Klusák J., Knésl Z.: Determination of crack initiation direction from a bi-material notch based on the strain energy density concept. Comp. Mater. Sci. 39 (2007) 214-218