---

Khalaj O., Jamshidi M., Hassas P., Mašek B., Štádler C., Svoboda J.: Digital twinning of a magnetic forging holder to enhance productivity for industry 4.0 and metaverse. Processes 11 (2023) 1703

Gamanov Š., Luptáková N., Bořil P., Jarý M., Mašek B., Dymáček P., Svoboda J.: Mechanisms of plastic deformation and fracture in coarse grained Fe-10Al-4Cr-4Y2O3 ODS nanocomposite at 20-1300°C. Journal of Materials Research and Technology 24 (2023) 4863-4874


Scheiber D., Svoboda J., Fischer F., Böhm H., Romaner L.: Fully coupled segregation and precipitation kinetics model with ab initio input for the Fe-Au system. Acta Mater. 244 (2023) 118577

Svoboda J., Hackl K., Fischer F.: A note on maxima and minima of dissipation in context of treatment of irreversible thermodynamic systems by application of Extremal Principles. Scr. Mater. 233 (2023) 115519

Kocich R., Kunčická L.: Optimizing structure and properties of Al/Cu laminated conductors via severe shear strain. J. Alloys Comp. 953 (2023) 170124

Kunčická L., Jambor M., Král P.: High pressure torsion of copper; effect of processing temperature on structural features, microhardness and electric conductivity. Materials 16 (2023) 2738

Babinský T., Šulák I., Kuběna I., Man J., Weiser A., Švábenská E., Englert L., Guth S.: Thermomechanical fatigue of additively manufactured 316L stainless steel. Mater. Sci. Eng. A 869 (2023) 144831

Polat O., Coskun F., Yildirim Y., Sobola D., Ercelik M., Arikan M., Coskun M., Sen C., Durmus Z., Caglar Y., Caglar M., Turut .: The structural studies and optical characteristics of phase-segregated Ir-doped LuFeO3-delta films. Appl. Phys. A 129 (2023) 198

Sklenička V., Král P., Dvořák J., Kvapilová M., Kuchařová K.: Creep in nanostructured materials. Mater. Trans. 64 (2023) 1566-1574

Sklenička V., Kuchařová K., Král P., Dvořák J., Kvapilová M., Vrtílková V., Krejčí J.: Investigation of the thermal creep behaviour of non-irradiated Zr1%Nb cladding alloys between 623 and 1223K. J. Nucl. Mater. 583 (2023) 154518


Dobeš F., Dymáček P.: Creep behavior of squeeze-cast Mg-15Gd alloy. Crystals 13 (2023) 374

Khalaj O., Jamshidi M., Hassas P., Hosseininezhad M., Mašek B., Štádler C., Svoboda J.: Metaverse and AI digital twinning of 42SiCr steel alloys. Mathematics 11 (2023) 4

Svoboda J., Kocich R., Gamanov Š., Kunčická L., Luptáková N., Dymáček P.: Processing window for hot consolidation by rolling and rotary swaging of Fe-10Al-4Cr-4Y2O3 ODS nanocomposite. Materials Today Communications 34 (2023) 105393

Ronoh K., Fawaeer S., Holcman V., Knápek A., Sobola D.: Comprehensive characterization of different metallic thin films on highly oriented pyrolytic graphite substrate. Vacuum 215 (2023) 112345

---

Khalaj O., Saebnoori E., Mašek B., Štádler C., Hassas P., Svoboda J.: The Influence of Cooling Rate between Ms and Mf on the Mechanical Properties of Low Alloy 42SiCr Steel Treated by the Q-P Process. Metals 12 (2022) 2081

Betekhtin V., Kadomtsev A., Narykova M., Amosová O., Kolobov Y., Sklenička V., Dvořák J.: Effect of the Structural State and Oxide Coating on the Mechanostability of VT1-0 Titanium upon Its Cyclic Loading. Physics of the Solid State 1 (2022) 1901-1905

Vrchovecká K., Weiser A., Přibyl J., Kuta J., Holzer J., Pávková Goldbergová M., Sobola D., Dlouhý A.: A release of Ti-ions from nanostructured titanium oxide surfaces. Surfaces and Interfaces 29 (2022) 101699

Kunčická L., Kocich R., Jambor M.: Shear strain induced recrystallization/recovery phenomena within rotary swaged Al/Cu composite conductors. Mater. Character. 194 (2022) 112399

Pechoušek J., Kuzmann E., Vondrášek R., Olina A., Vrba V., Kouřil L., Ingr T., Král P., Mashlan M.: Successive Grinding and Polishing Effect on the Retained Austenite in the Surface of 42CrMo4 Steel. Metals 12 (2022) 119

Dymáček P., Kocich R., Kunčická L., Jarý M., Luptáková N., Holzer J., Mašek B., Svoboda J.: Processing of top creep and oxidation resistant Fe-Al based ODS alloys. Procedia Struct. Integr. 42 (2022) 1576-1583

Ramazanov S., Sobola D., Talu S., Orudzev F., Arman A., Kaspar P., Dallaev R., Ramazanov G.: Multiferroic behavior of the functionalized surface of a flexible substrate by deposition of Bi2O3 and Fe2O3. Microsc. Res. Tech. 85 (2022) 1300-1310

Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Král L., Kvapilová M., Roupcová P., Horváth J.: Creep Resistance of S304H Austenitic Steel Processed by High-Pressure Sliding. Materials 15 (2022) 331

Oladijo S., Mwema F., Jen T., Ronoh K., Sobola D., Akinlabi E.: Nanoscale surface dynamics of RF-magnetron sputtered CrCoCuFeNi high entropy alloy thin films. Materials Today Communications 33 (2022) 104523

Balog M., Křižík P., Dvořák J., Bajana O., Krajčovič J., Drienovsky M.: Industrially fabricated in-situ Al-AlN metal matrix composites (part B): The mechanical, creep, and thermal properties. J. Alloys Comp. 909 (2022) 164720

Dvořák J., Král P., Kadomtsev A., Betekhtin V., Narykova M., Kvapilová M., Sklenička V.: Influence of Cryo-Processing and Post-SPD Annealing on Creep Behavior of CP Titanium. Materials 15 (2022) 1646

Gamanov Š., Holzer J., Roupcová P., Svoboda J.: High temperature oxidation kinetics of Fe 10Al 4Cr 4Y2O3 ODS alloy at 1200 1400 C. Corros. Sci. 206 (2022) 110498

Holzer J., Gamanov Š., Luptáková N., Dlouhý A., Svoboda J.: Coarsening Kinetics of Y2O3 Dispersoid in New Grade of Fe-Al-Cr-Based ODS Alloy. Metals 12 (2022) 12020210

Kunčická L., Kocich R.: Effect of activated slip systems on dynamic recrystallization during rotary swaging of electro-conductive Al-Cu composites. Mater. & Design 321 (2022) 132436

Vogric M., Kozeschnik E., Svoboda J., Führer M., Kreyca J., Wei W., Povoden-Karadeniz E.: Kinetic Modeling of Grain Boundary Cementite Evolution. Metall. Mater. Trans. A 53 (2022) 3759-3773

Pisarenko T., Papež N., Sobola D., Talu S., Částková K., Škarvada P., Macků R., Ščasnovič E., Kastyl J.: Comprehensive Characterization of PVDF Nanofibers at Macro- and Nanolevel. Polymers 14 (2022) 593

Dobeš F., Hadraba H., Chlup Z., Matějíček J.: Different Types of Particle Effects in Creep Tests of CoCrFeNiMn High-Entropy Alloy. Materials 15 (2022) 7363

Drdlíková K., Klement R., Svoboda J., Drdlík D., Galusek D., Maca K.: Luminescent Dy3+ and Dy3+/Cr3+ doped transparent Al2O3 ceramics: Microstructure and optical properties. J. Eur. Ceram. Soc. 42 (2022) 4343-4352

Svoboda J., Bořil P., Holzer J., Luptáková N., Jarý M., Mašek B., Dymáček P.: Substantial Improvement of High Temperature Strength of New-Generation Nano-Oxide-Strengthened Alloys by Addition of Metallic Yttrium. Materials 15 (2022) 15020504

Kvapilová M., Ohankova M., Král P., Dvořák J., Kuchařová K., Čmakal J., Sklenička V.: Characterization of creep properties and the microstructure of a service-exposed low alloy CrMoV steel steam pipe. Mater. Sci. Eng. A 853 (2022) 143684

Heep L., Bürger D., Bonnekoh C., Wollgramm P., Dlouhý A., Eggeler G.: The effect of deviations from precise [001] tensile direction on creep of Ni-base single crystal superalloys. Scr. Mater. 207 (2022) 114274

Svoboda J., Gamanov Š., Bártková D., Luptáková N., Bořil P., Jarý M., Mašek B., Holzer J., Dymáček P.: The Optimization of Mechanical Alloying Conditions of Powder for the Preparation of a Fe-10Al-4Cr-4Y2O3 ODS Nanocoposite. Materials 15 (2022) 9034

Leitner S., Ecker W., Fischer F., Svoboda J.: Thermodynamic trapping and diffusion model for multiple species in systems with multiple sorts of traps. Acta Mater. 233 (2022) 117940

Kunčická L., Kocich R., Kačor P., Jambor M., Jopek M.: Influence of (Sub) Structure Development within Rotary Swaged Al?Cu Clad Conductors on Skin Effect during Transfer of Alternating Current. Materials 15 (2022) 650

Dabees S., Mirzaei S., Kaspar P., Holcman V., Sobola D.: Characterization and Evaluation of Engineered Coating Techniques for Different Cutting Tools-Review. Materials 15 (2022) 5633

Tofel P., Částková K., Říha D., Sobola D., Papež N., Kaštyl J., Talu S., Hadaš Z.: Triboelectric Response of Electrospun Stratified PVDF and PA Structures. Nanomaterials 12 (2022) 349

Svoboda J., Zickler G., Kozeschnik E., Fischer F.: Generalization of classical Hillert's grain growth and LSW theories to a wide family of kinetic evolution equations and stationary distribution functions. Acta Mater. 235 (2022) 118085

Kunčická L., Kocich R., Benč M., Dvořák J.: Affecting Microstructure and Properties of Additively Manufactured AISI 316L Steel by Rotary Swaging. Materials 15 (2022) 6291

Kunčická L., Kocich R., Kačor P., Jambor M., Marek M.: Characterising Correlations between Electric Conductivity and Structural Features in Rotary Swaged Al/Cu Laminated Conductors. Materials 15 (2022) 1003

Kunčická L., Kocich R., Németh G., Dvořák K., Pagáč M.: Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion. Additive Manufacturing 59 (2022) 103128

Mayer M., Ressel G., Svoboda J.: The Effect of Cryogenic Mechanical Alloying and Milling Duration on Powder Particles Microstructure of an Oxide Dispersion Strengthened FeCrMnNiCo High-Entropy Alloy. Metall. Mater. Trans. A 53 (2022) 573-584

Papež N., Pisarenko T., Ščasnovič E., Sobola D., Talu S., Dallaev R., Částková K., Sedlák P.: A Brief Introduction and Current State of Polyvinylidene Fluoride as an Energy Harvester. Coatings 12 (2022) 1429

Svoboda J., Drdlíková K., Drdlík D., Kroupa A., Michalička J., Maca K.: Doping of alumina ceramics by manganese Thermodynamical and experimental approach. Process. Appl. Ceram. 16 (2022) 13-21

Moravčík I., Zelený M., Dlouhý A., Hadraba H., Moravčíková-Goueva L., Papež P., Fikar O., Dlouhý I., Raabe D., Li Z.: Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments. Sci. Technol. Adv. Mater. 23 (2022) 376-392

Böhm H., Zickler G., Fischer F., Svoboda J.: Strain and interface energy of ellipsoidal inclusions subjected to volumetric eigenstrains: shape factors. Arch. Appl. Mech. 92 (2022) 405-411

---

Shabanov N., Rabadanov K., Gafurov M., Isaev A., Sobola D., Suleimanov S., Amirov A., Asvarov A.: Lignin-Based Gel Polymer Electrolyte for Cationic Conductivity. Polymers 13 (2021) 2306

Orudzhev F., Ramazanov S., Sobola D., Kaspar P., Trčka T., Částková K., Kastyl J., Zvereva I., Wang C., Selimov D., Gulakhmedov R., Abdurakhmanov M., Shuaibov A., Kadiev M.: Ultrasound and water flow driven piezophototronic effect in self-polarized flexible alpha-Fe2O3 containing PVDF nanofibers film for enhanced catalytic oxidation. Nano Energy 90 (2021) 106586


Dvořák J., Kadomtsev A., Betekhtin V., Sklenička V., Král P., Kvapilová M.: Creep behaviour of ultrafine-grained CP titanium processed by multipass rolling. IOP Conf. Ser.: Mater. Sci. Eng. 1178 (2021) 012013

Sedlak P., Sobola D., Gajdos A., Dallaev R., Nebojsa A., Kubersky P.: Surface Analyses of PVDF/NMP/[EMIM][TFSI] Solid Polymer Electrolyte. Polymers 13 (2021) 2678

Sklenička V., Kuchařová K., Kvapilová M., Král P., Dvořák J.: The transition from the power-law to the power-law breakdown regimes in thermal creep of Zr1%Nb cladding alloys. Kovové materiály 59 (2021) 279-289


Fintová S., Kuběna I., Jarý M., Luptáková N., Stratil L., Šiška F., Svoboda J.: Creep properties of heat-treated Fe-Al-O ODS alloy. Kovové materiály 59 (2021) 39-50

Li Y., Dymáček P., Hurst R., Stevens P.: A novel metodology for determining creep crack initiation and growth properties using FEM with notched small punch specimens. Theor. Appl. Fract. Mech. 116 (2021) 103112

Král P., Dvořák J., Sklenička V., Masuda T., Tang Y., Horita Z., Kunčická L., Kuchařová K., Kvapilová M., Svobodová M.: Effect of severe plastic deformation on creep behaviour and microstructure changes of P92 at 923 K. Kovové materiály 59 (2021) 141 -148

Sklenička V., Dvořák J., Král P., Betekhtin V., Kadomtsev A., Narykova M., Dobatkin S., Kuchařová K., Kvapilová M.: Influence of a prior pressurization treatment on creep behaviour of an ultrafine-grained Zr-2.5%Nb alloy. Mater. Sci. Eng. A 820 (2021) 141570

Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kunčická L., Kvapilová M., Ohankova M.: Influence of High Pressure Sliding and Rotary Swaging on Creep Behavior of P92 Steel at 500 °C. Metals 11 (2021) 2044

Böhm H., Zickler G., Fischer F., Svoboda J.: Role of elastic strain energy in spheroidal precipitates revisited. Mech. Mater. 155 (2021) 103781

Heczko M., Mazánová V., Gröger R., Záležák T., Hooshmand M., George E., Mills M., Dlouhý A.: Elemental segregation to lattice defects in the CrMnFeCoNi high-entropy alloy during high temperature exposures. Acta Mater. 208 (2021) 116719

Kunčická L., Jambor M., Weiser A., Dvořák J.: Structural Factors Inducing Cracking of Brass Fittings. Materials 14 (2021) 3255

Oliveros D., Fraczkiewicz A., Dlouhý A., Zhang C., Song H., Sandfeld S., Legros M.: Orientation-related twinning and dislocation glide in a cantor high entropy alloy at room and cryogenic temperature studied by in situ TEM straining. Mater. Chem. Phys. 272 (2021) 124955


Sobola D., Kaspar P., Částková K., Dallaev R., Papež N., Sedlák P., Trčka T., Orudzhev F., Kaštyl J., Weiser A., Knápek A., Holcman V.: PVDF Fibers Modification by Nitrate Salts Doping. Polymers 13 (2021) 2439

Kunčická L., Jopek M., Kocich R., Dvořák K.: Determining Johnson-Cook Constitutive Equation for Low-Carbon Steel via Taylor Anvil Test. Materials 14 (2021) 4821


Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kuchařová K., Kvapilová M., Svobodová M.: Microstructure changes occurring in heat-resistant steels during severe plastic deformation and subsequent creep. IOP Conf. Ser.: Mater. Sci. Eng. 1178 (2021) 012033

Král P., Dvořák J., Kunčická L., Kocich R., Kvapilová M., Svobodová M., Sklenička V.: Influence of Rotary Swaging on Creep Behaviour of P92 Steel. IOP Conf. Ser.: Mater. Sci. Eng. 1190 (2021) 012033

Chlupová A., Šulák I., Kunčická L., Kocich R., Svoboda J.: Microstructural aspects of new grade ODS alloy consolidated by rotary swaging. Mater. Character. 181 (2021) 111477

Kvapilová M., Král P., Dvořák J., Sklenička V.: High Temperature Creep Behaviour of Cast Nickel-Based Superalloys INC 713 LC, B1914 and MAR-M247. Metals 11 (2021) 152

Sklenička V., Král P., Kuchařová K., Kvapilová M., Dvořák J., Kloc L.: Thermal creep fracture of a Zr1%Nb cladding alloy in the alpha and (alpha+beta) phase regions. J. Nucl. Mater. 553 (2021) 152950

Kunčická L., Kocich R.: Effects of Temperature (In)homogeneity during Hot Stamping on Deformation Behavior, Structure, and Properties of Brass Valves. Adv. Eng. Mater. 12 (2021) 2101414

Khalaj O., Ghobadi M., Saebnoori E., Zarezadeh A., Shishesaz M., Mašek B., Štádler C., Svoboda J.: Development of Machine Learning Models to Evaluate the Toughness of OPH Alloys. Materials 14 (2021) 6713

Khalaj O., Jamshidi M., Saebnoori E., Mašek B., Štádler C., Svoboda J.: Hybrid Machine Learning Techniques and Computational Mechanics: Estimating the Dynamic Behavior of Oxide Precipitation Hardened Steel. IEEE ACCESS 9 (2021) 156930-156946

Kunčická L., Halama R., Fusek M.: Special Issue: Selected Papers from Experimental Stress Analysis 2020. Materials 14 (2021) 1136

Kořínek M., Halama R., Fojtík F., Pagáč M., Krček J., Krzikalla D., Kocich R., Kunčická L.: Monotonic Tension-Torsion Experiments and FE Modeling on Notched Specimens Produced by SLM Technology from SS316L. Materials 14 (2021) 33

Heep L., Schwalbe C., Heinze C., Dlouhý A., Rae C., Eggeler G.: Dislocation networks in gamma/gamma´-microstructures formed during selective laser melting of a Ni-base superalloy. Scr. Mater. 190 (2021) 121-125

---

Král P., Blum W., Dvořák J., Yurchenko N., Stepanov N., Zherebtsov S., Kunčická L., Kvapilová M., Sklenička V.: Creep behavior of an AlTiVNbZr0.25 high entropy alloy at 1073 K. Mater. Sci. Eng. A 783 (2020) 139291

Drexler A., Siegl W., Ecker W., Tkadletz M., Kloesch G., Schnideritsch H., Mori G., Svoboda J., Fischer F.: Cycled hydrogen permeation through Armco iron - A joint experimental and modeling approach. Corros. Sci. 176 (2020) 109017

Kunčická L., Kocich R.: Correlating Structure and Electrical Properties in Rotary Swaged Al/Cu Clad Composites. Key Eng. Mater. 865 (2020) 85-90

Sklenička V., Král P., Dvořák J., Takizawa Y., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.: Effects of Grain Refinement and Predeformation Impact by Severe Plastic Deformation on Creep in P92 Martensitic Steel. Adv. Eng. Mater. 22 (2020) 1900448

Svoboda J., Holec D., Popov M., Zickler G., Fischer F.: Modelling of short-range ordering kinetics in dilute multicomponent substitutional solid solutions. Philos. Mag. 2020 (2020) 1-20

Svoboda J., Kunčická L., Luptáková N., Weiser A., Dymáček P.: Fundamental Improvement of Creep Resistance of New-Generation Nano-Oxide Strengthened Alloys via Hot Rotary Swaging Consolidation. Materials 13 (2020) 5217

Schneider M., George E., Manescau T., Záležák T., Hunfeld J., Dlouhý A., Eggeler G., Laplanche G.: Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy. Int. J. Plast. 124 (2020) 155-169

Chlupová A., Heczko M., Obrtlík K., Dlouhý A., Kruml T.: Effect of heat-treatment on the microstructure and fatigue properties of lamellar gama-TiAl alloyed with Nb, Mo and/or C. Mater. Sci. Eng. A 786 (2020) 139427

Sklenička V., Kuchařová K., Svoboda M., Král P., Kvapilová M., Dvořák J.: The Creep Resistance of Short-Fibre Reinforced Metal Matrix Composites. Structural. Integr. 16 (2020) 93-99

Kocich R., Kunčická L.: Special Issue: Mechanical Properties in Progressive Mechanically Processed Metallic Materials. Materials 13 (2020) 4668

Gamsjäger E., Gschoepf ., Svoboda J.: Influence of Finite Mobilities of Triple Junctions on the Grain Morphology and Kinetics of Grain Growth. Metals 10 (2020) 185

Svoboda J., Luptáková N., Jarý M., Dymáček P.: Influence of Hot Consolidation Conditions and Cr-Alloying on Microstructure and Creep in New-Generation ODS Alloy at 1100 °C. Materials 13 (2020) 5070

Sklenička V., Kuchařová K., Svoboda M., Kvapilová M., Dvořák J., Král P.: Creep behaviour of unreinforced and reinforced QE22 magnesium alloy: A comparison. Kovové materiály 58 (2020) 71-82

Scheiber D., Jechtl T., Svoboda J., Fischer F., Romaner L.: On solute depletion zones along grain boundaries during segregation. Acta Mater. 182 (2020) 100-107

Bürger D., Dlouhý A., Yoshimi K., Eggeler G.: On the stress and temperature dependence of low temperature and high stress shear creep in Ni-base single crystal superalloys. Mater. Sci. Eng. A 795 (2020) 139961

Dobeš F., Dymáček P., Friák M.: Creep of Heusler-type alloy Fe-25Al-25Co. Crystals 10 (2020) 52

Svoboda J., Horník V., Riedel H.: Modelling of Processing Steps of New Generation ODS Alloys. Metall. Mater. Trans. A 51 (2020) 5296-5305

Khalaj O., Saebnoori E., Jirková H., Chocholaty O., Kučerová L., Hajšman J., Svoboda J.: The Effect of Heat Treatment on the Tribological Properties and Room Temperature Corrosion Behavior of Fe-Cr-Al-Based OPH Alloy. Materials 13 (2020) 5465

Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kvapilová M., Svobodová M.: Effect of ultrafine-grained microstructure on creep behaviour in 304L austenitic steel. Mater. Sci. Eng. A 785 (2020) 139383

Hackl K., Fischer F., Svoboda J.: On the treatment of non-reciprocal rate-independent kinetics via thermodynamic extremal principles. J. Mech. Phys. Solids 145 (2020) 104149

Sklenička V., Kuchařová K., Kvapilová M., Kloc L., Dvořák J., Král P.: High-Temperature Creep Tests of Two Creep-Resistant Materials at Constant Stress and Constant Load. Key Eng. Mater. 827 (2020) 246-251

Kunčická L., Kocich R., Klečková Z.: Effects of Sintering Conditions on Structures and Properties of Sintered Tungsten Heavy Alloy. Materials 13 (2020) 2338

Fintová S., Kuběna I., Luptáková N., Jarý M., Šmíd M., Stratil L., Šiška F., Svoboda J.: Development of advanced Fe-Al-O ODS alloy microstructure and properties due to heat treatment. J. Mater. Res. 35 (2020) 2789-2797

Chlupová A., Šulák I., Svoboda J.: High Temperature Cyclic Plastic Response of New-Generation ODS Alloy. Metals 10 (2020) 804

Dobeš F., Dymáček P.: Creep behavior of AJ62 Magnesium-Aluminum-Strontium alloy. Journal of Magnesium and Alloys 8 (2020) 414-420

Kunčická L., Kocich R.: Effect of Swaging Temperature on Deformation Behaviour of W93Ni6Co1 tungsten Heavy Alloy. Key Eng. Mater. 865 (2020) 91-96

Dymáček P., Dobeš F., Jarý M., Jirásková Y., Pizúrová N., Friák M.: Small punch testing of Fe-Al based alloys with Ti and Nb additions. IOP Conf. Ser.: Mater. Sci. Eng. 723 (2020) 012006

Svoboda J., Shan Y., Zickler G., Kozeschnik E., Fischer F.: Local approach for coarsening of precipitates. Scr. Mater. 178 (2020) 232-235

Kunčická L., Macháčková A., Petrmichl R., Klečková Z., Marek M.: Optimizing Induction Heating of WNiCo Billets Processed via Intensive Plastic Deformation. Applied Sciences 10 (2020) 8125

Bulutsuz A., Chrominski W., Huang Y., Král P., Yurci M., Lewandowska M., Langdon T.: A Comparison of Warm and Combined Warm andLow-Temperature Processing Routes for the Equal-ChannelAngular Pressing of Pure Titanium. Adv. Eng. Mater. 22 (2020) 1900698

Kunčická L., Kocich R.: Sub-Structure and Residual Stress in Rotary Swaged Cu/Al Clad Composite Wires. Key Eng. Mater. 865 (2020) 7-12

Khalaj O., Saebnoori E., Jirková H., Chocholaty O., Svoboda J.: High Temperature and Corrosion Properties of A Newly Developed Fe-Al-O Based OPH Alloy. Metals 10 (2020) 167

Veverková J., Bártková D., Weiser A., Dlouhý A., Babula P., Stepka P., Goldbergová M.: Effect of Ni ion release on the cells in contact with NiTi alloys. Environ Sci Pollut R 27 (2020) 7934-7942

Gröger R., Vítek V., Dlouhý A.: Effective pair potential for random fcc CoCrFeMnNi alloys. Model. Simul. Mater. Sci. Eng. 28 (2020) 075006

Král P., Dvořák J., Blum W., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kunčická L., Kocich R., Kvapilová M., Svobodová M.: The Effect of Predeformation on Creep Strength of 9% Cr Steel. Materials 13 (2020) 5330

Hackl K., Fischer F., Zickler G., Svoboda J.: Are Onsager's reciprocal relations necessary to apply Thermodynamic Extremal Principles? . J. Mech. Phys. Solids 135 (2020) 103780

Bürger D., Dlouhý A., Yoshimi K., Eggeler G.: How Nanoscale Dislocation Reactions Govern Low-Temperature and High-Stress Creep of Ni-Base Single Crystal Superalloys. Crystals 10 (2020) 134

Zhong J., Song M., Guan K., Dymáček P.: Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test. Int. J. Mech. Sci. 166 (2020) 105195

Kunčická L., Macháčková A., Lavery N., Kocich R., Cullen J., Hlaváč L.: Effect of thermomechanical processing via rotary swaging on properties and residual stress within tungsten heavy alloy. International Journal of Refractory Metals and Hard Materials 87 (2020) 105120

Kunčická L., Klečková Z.: Structure Characteristics Affected by Material Plastic Flow in Twist Channel Angular Pressed Al/Cu Clad Composites. Materials 13(18) (2020) 4161

Stratil L., Horník V., Dymáček P., Roupcová P., Svoboda J.: The Influence of Aluminum Content on Oxidation Resistance of New-Generation ODS Alloy at 1200°C. Metals 10 (2020) 1478

---

Dobeš F., Dymáček P., Hasegawa M., Iwashita M.: High-temperature creep of a CoNiCrAlY bond coat alloy. Mater. Sci. Eng. A 759 (2019) 272-277

Watanabe K., Ashida M., Masuda T., Král P., Takizawa Y., Yumoto M., Otagiri Y., Sklenička V., Hanawa T., Horita Z.: Production of Superplastic Ti­6Al­7Nb Alloy Using High-Pressure Sliding Process. Mater. Trans. 60 (2019) 1785-1791

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Strain Rate Contribution due to Dynamic Recovery of Ultrafine-Grained Cu-Zr as Evidenced by Load Reductions during Quasi-Stationary Deformation at 0.5 Tm. Metals 9 (2019) 1150

Dymáček P., Dobeš F., Andrés D.: Notch sensitivity of Sanicro 25 in small punch creep test. Theor. Appl. Fract. Mech. 100 (2019) 383-389

Dymáček P., Svoboda J., Jirková H., Stratil L., Horník V.: Microstructure evolution and creep strength of new-generation oxide dispersion strengthened alloys with high volume fraction of nano-oxides. Procedia Struct. Integr. 17 (2019) 427-433

Svoboda J., Riedel H.: Modeling of spontaneous transformation of nitrides to Z phase accounting for stress relaxation by diffusion and interface activity. Comp. Mater. Sci. 161 (2019) 24-34

Svoboda J., Shan Y., Kozeschnik E., Fischer F.: Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates. Scr. Mater. 168 (2019) 81 -85

Dymáček P., Li Y., Dobeš F., Stevens P.: New approach to determine uniaxial creep properties from small punch creep curves. Mater. at High Temp. 36 (2019) 157-164

Kvapilová M., Dvořák J., Král P., Hrbáček K., Sklenička V.: Creep behaviour and life assessment of a cast nickel - base superalloy MAR - M247. High Temp. Mater. Proc. 38 (2019) 590-600

Málek J., Zýka J., Lukáč F., Čížek J., Kunčická L., Kocich R.: Microstructure and Mechanical Properties of Sintered and Heat-Treated HfNbTaTiZr High Entropy Alloy. Metals 9(12) (2019) 1324

Kunčická L., Kocich R., Dvořák K., Macháčková A.: Rotary swaged laminated Cu-Al composites: Effect of structure on residual stress and mechanical and electric properties. Mater. Sci. Eng. A 742 (2019) 743-750

Kunčická L., Macháčková A., Krátká L., Kocich R.: Analysis of Deformation Behaviour and Residual Stress in Rotary Swaged Cu/Al Clad Composite Wires. Materials 12 (2019) 3462

Kloc L., Sklenička V., Dymáček P.: Transient Effects in Creep of Sanicro 25 Austenitic Steel and Their Modelling. Metals 9 (2019) 245

Kvapilová M., Sklenička V., Král P., Dvořák J.: High Temperature Creep Properties of Cast Cobalt-Based Superalloys: A Comparison. Procedia Struct. Integr. 8 (2019) 39-44

Sklenička V., Kuchařová K., Svoboda M., Kvapilová M., Král P., Dvořák J.: Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations. Int. J. Pres. Ves. Pip. 178 (2019) 104000


Kamarad J., Friák M., Kastil J., Schneeweiss O., Šob M., Dlouhý A.: Effect of high pressure on magnetic properties of CrMnFeCoNi high entropy alloy. J. Magn. Magn. Mater. 487 (2019) 165333

Dymáček P., Dobeš F., Jirásková Y., Pizúrová N., Friák M.: Tensile, creep and fracture testing of prospective Fe-Al-based alloys using miniature specimens. Theor. Appl. Fract. Mech. 99 (2019) 18-26

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Quasi-Stationary Strength of ECAP-Processed Cu-Zr at 0.5 Tm. Metals 9 (2019) 1149

Hasegawa M., Iwashita M., Kubota Y., Dymáček P., Dobeš F.: Microstructure evolution under high temperature deformation of CoNiCrAlY bond coat alloy. Mater. Sci. Eng. A 756 (2019) 237-247

Hackl K., Khan A., Fischer F., Svoboda J.: Influence of bulk energy and triple junction mobility on interface kinetics - A tool for interpretation of experiments. Acta Mater. 174 (2019) 310-318

Král P., Kvapilová M., Sklenička V., Zýka J., Čmakal J., Hrbáček K.: Microstructure and damage processes in a nickel-based alloy exposed to molten glass. Procedia Struct. Integr. 23 (2019) 287-292

Schneider M., George E., Manescau T., Záležák T., Hunfeld J., Dlouhý A., Eggeler G., Laplanche G.: Benchmark dataset of the effect of grain size on strength in the single-phase FCC CrCoNi medium entropy alloy. Data in Brief 27 (2019) 104592

Dobeš F., Dymáček P., Friák M.: The Influence of Niobium Additions on Creep Resistance of Fe-27 at. % Al Alloys. Metals 9 (2019) 739

Král P., Staněk J., Kunčická L., Seitl F., Petrich L., Schmidt V., Beneš V., Sklenička V.: Microstructure changes in HPT-processed copper occurring at room temperature. Mater. Character. 151 (2019) 602-611

Král P., Dvořák J., Sklenička V., Langdon T.: The Characteristics of Creep in Metallic Materials Processed by Severe Plastic Deformation. Mater. Trans. 60 (2019) 1506-1517

Olina A., Píška M., Petrenec M., Hervoches C., Beran P., Pechoušek J., Král P.: Assessment of Retained Austenite in Fine Grained Inductive Heat Treated Spring Steel. Materials 12 (2019) 4063

Svoboda J., Ecker W., Razumovskiy V., Zickler G., Fischer F.: Kinetics of interaction of impurity interstitials with dislocations revisited. Prog. Mater. Sci. 101 (2019) 172-206

Kunčická L., Král P., Dvořák J., Kocich R.: WE43 BIOCOMPATIBLE ALLOY AFTER SEVERE PLASTIC DEFORMATION: STRUCTURE CHARACTERIZATION. METAL 2019 Conf. Proc. 1 (2019) 1284-1290

Weiser A., Buršíková V., Jarý M., Dymáček P., Dugáček J., Frenzel J., Čermák J., Dlouhý A.: Strength of hydrogen-free and hydrogen-doped Ni50Ti50 shape memory platelets . Scr. Mater. 162 (2019) 151-155

Horst O., Ruttert B., Bürger D., Heep L., Wang H., Dlouhý A., Theisen W., Eggeler G.: On the rejuvenation of crept Ni-Base single crystal superalloys (SX) by hot isostatic pressing (HIP). Mater. Sci. Eng. A 758 (2019) 202-214

Dymáček P., Bártková D., Horník V., Stratil L., Mašek B., Svoboda J.: New Generation of ODS Alloys. Key Eng. Mater. 810 (2019) 113-118


Kunčická L., Kocich R., Ryukhtin V., Cullen J., Lavery N.: Study of structure of naturally aged aluminium after twist channel angular pressing. Mater. Character. 152 (2019) 94-100

Luptáková N., Dymáček P., Jarý M., Záležák T.: Failure analysis of a gripping assembly loaded at temperatures above 1000 °C. Eng. Fail. Anal. 96 (2019) 384-393

Kunčická L., Král P., Dvořák J., Kocich R.: Texture Evolution in Biocompatible Mg-Y-Re Alloy After Friction Stir Processing. Metals 9(11) (2019) 1181

---

Sklenička V., Kuchařová K., Svobodová M., Král P., Kvapilová M., Dvořák J.: The effect of a prior short-term ageing on mechanical and creep properties of P92 steel. Mater. Character. 136 (2018) 388-397

Záležák T., Šiška F., Stratil L., Fintová S., Horník V., Bártková D., Husák R., Svoboda J., Dlouhý A.: An integration of 3D discrete dislocation dynamics with numerical tensile testing. Acta Phys. Pol. A 134 (2018) 777-780

Kloc L., Sklenička V., Dymáček P., Plešek J.: New creep constitutive equation for finite element modelling including transient effects. Mech. Mater. 119 (2018) 49-55

Gamsjäger E., Ogris D., Svoboda J.: Kinetics of Grain Boundary Networks Controlled by Triple Junction and Grain Boundary Mobility. Metals 8 (2018) 977

Svoboda J., Fischer F.: Influence of accounting for translationa lmotion of grains on grain growth kinetics and size distribution. Scr. Mater. 146 (2018) 255-259

Dobeš F., Hadraba H., Chlup Z., Dlouhý A., Vilémová M., Matějíček J.: Compressive creep behavior of an oxide-dispersion-strengthened CoCrFeMnNi high-entropy alloy. Mater. Sci. Eng. A 732 (2018) 99-104

Sklenička V., Kuchařová K., Svoboda M.: Creep behaviour and microstructure evolution of advanced creep-resistant 9%Cr martensitic steels under cyclic thermal loading. Kovové materiály 56 (2018) 1-13

Holmström S., Li Y., Dymáček P., Vacchieri E., Jeffs S., Lancaster R., Omacht D., Kuboň Z., Anelli E., Rantala J., Tonti A., Komazaki S., Naveena ., Bruchhausen M., Hurst R., Hähner P., Richardson M., Andrés D.: Creep strength and minimum strain rate estimation from Small Punch Creep tests. Mater. Sci. Eng. A 731 (2018) 161-172

Blum W., Dvořák J., Král P., Sklenička V.: Dynamic grain coarsening in creep of pure Cu at 0.42Tm after predeformation by ECAP. Mater. Sci. Eng. A 731 (2018) 520-529

Dobeš F., Dymáček P., Friák M.: Small punch creep of Fe-Al-Cr alloy with Ce addition and its relation to uniaxial creep tests. Kovové materiály 56 (2018) 205-212

Wu X., Dlouhý A., Eggeler Y., Spiecker E., Kostka A., Somsen C., Eggeler G.: On the nucleation of planar faults during low temperature and high stress creep of single crystal Ni-base superalloys. Acta Mater. 144 (2018) 642-655

Kocich R., Kunčická L., Král P., Strunz P.: Characterization of innovative rotary swaged Cu-Al clad composite wire conductors. Mater. & Design 160 (2018) 828-835

Kvapilová M., Podhorná B., Dvořák J., Král P., Zýka J., Hrbáček K., Sklenička V.: Creep Damage Mechanisms in Cast Cobalt Superalloys for Applications in Glass Industry. Key Eng. Mater. 774 (2018) 173-178

Dymáček P., Jarý M., Dobeš F., Kloc L.: Tensile and Creep Testing of Sanicro 25 Using Miniature Specimens. Materials 11 (2018) 142

Šiška F., Stratil L., Hadraba H., Fintová S., Kuběna I., Horník V., Husák R., Bártková D., Záležák T.: Strengthening mechanisms of different oxide particles in 9Cr ODS steel at high temperatures. Mater. Sci. Eng. A 732 (2018) 112-119

Fischer F., Zickler G., Svoboda J.: Stress-strain analysis of the antiplane shear problem for an infinite cylindrical inclusion with eigenstrain an addendum to Arch. Appl. Mech. 2018. Arch. Appl. Mech. 88 (2018) 1209-1211

Válková L., Ševčíková J., Pávková Goldbergová M., Weiser A., Dlouhý A.: Osteoarthritic process modifies expression response to NiTi alloy presence. J. Mater. Sci.: Mater. in Medicine 29 (2018) 146

Svoboda J., Zickler G., Fischer F.: An innovative concept for interstitial diffusion in stressed crystals. Int. J. Solids Struct. 134 (2018) 173-180

Sklenička V., Kvapilová M., Král P., Dvořák J., Svoboda M., Podhorná B., Zýka J., Hrbáček K., Joch A.: Degradation processes in high-temperature creep of cast cobalt-based superalloys. Mater. Character. 144 (2018) 479-489

Král P., Sklenička V., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.: Microstructure and creep behaviour of P92 steel after HPT. Mater. Sci. Eng. A 723 (2018) 287-295

Dvořák J., Král P., Kvapilová M., Hrbáček K., Sklenička V.: HIGH - TEMPERATURE CREEP BEHAVIOUR OF CAST COBALT-BASE SUPERALLOYS. METAL 2018 Conf. Proc. 2018 (2018) 530-535

Kloc L., Dymáček P., Sklenička V.: High temperature creep of Sanicro 25 austenitic steel at low stresses. Mater. Sci. Eng. A 722 (2018) 88-92

Svoboda J., Horník V., Stratil L., Hadraba H., Mašek B., Khalaj O., Jirková H.: Microstructure Evolution in ODS Alloys with a High-Volume Fraction of Nano Oxides. Metals 8 (2018) 1079

Svoboda J., Fischer F.: Anisotropy of interstitial diffusion in bcc-crystals due to stress-induced unequal occupancies of different types of sites. Int. J. Solids Struct. 152-153 (2018) 66-70

Král P., Dvořák J., Sklenička V., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.: The Effect of Ultrafine-Grained Microstructure on Creep Behaviour of 9% Cr Steel. Materials 11 (2018) 787

Scheiber D., Romaner L., Fischer F., Svoboda J.: Kinetics of grain boundary segregation in multicomponent systems - The example of a Mo-C-B-O system. Scr. Mater. 150 (2018) 110-114

Khalaj O., Jirková H., Mašek B., Hassasroudsari P., Studecký T., Svoboda J.: Using thermomechanical treatments to improve the grain growth of new-generation ODS alloys. Mater. Technol. 52 (2018) 475-482

Eggeler G., Wieczorek ., Fox F., Berglund S., Bürger D., Dlouhý A., Wollgramm P., Neuking K., Schreuer J., Jácome L., Gao S., Hartmaier A., Laplanche G.: On Shear Testing of Single Crystal Ni-Base Superalloys. Metall. Mater. Trans. A 49A (2018) 3951-3962

Sklenička V., Kuchařová K., Kvapilová M., Kloc L., Dvořák J., Král P.: Interrelationship between Creep Deformation and Damage for Advanced Creep-Resistant Steels. Key Eng. Mater. 774 (2018) 119-124

Ševčíková J., Bártková D., Goldbergová M., Kuběnová M., Čermák J., Frenzel J., Weiser A., Dlouhý A.: On the Ni-Ion release rate from surfaces of binary NiTi shape memory alloys. Appl. Surf. Sci. 427 (2018) 434-443

Fischer F., Zickler G., Svoboda J.: Elastic stress-strain analysis of an infinite cylindrical inclusion with eigenstrain. Arch. Appl. Mech. 88 (2018) 453-460

Dobeš F., Dymáček P., Friák M.: Force-to-Stress Conversion Methods in Small Punch Testing Exemplified by Creep Results of Fe-Al Alloy with Chromium and Cerium Additions. IOP Conf. Ser.: Mater. Sci. Eng. 461 (2018) 012017

---

Bártková D., Šmíd M., Mašek B., Svoboda J., Šiška F.: Kinetic study of static recrystallization in an Fe-Al-O ultra-fine-grained nanocomposite. Philos. Mag. Lett. 97 (2017) 379-385

Fischer F., Zickler G., Svoboda J.: Modelling of grain refinement driven by negative grain boundary energy. Philos. Mag. 97 (2017) 1963-1977

Sklenička V., Kuchařová K., Král P., Kvapilová M., Dvořák J.: Applicability of empirical formulas and fractography for assessment of creep life and creep fracture modes of tempered martensitic 9%Cr steel. Kovové materiály 55 (2017) 69-80

Dobeš F., Dymáček P.: Estimation of Anisotropy of Creep Properties in Al and Mg Alloys by Means of Small Punch Test. Key Eng. Mater. 734 (2017) 137-143

Betekhtin V., Sklenička V., Kadomtsev A., Kolobov Y., Narykova M.: Defect Structure and Thermomechanical Stability of Nano- and Microcrystalline Titanium Obtained by Different Methods of Intense Plastic Deformation. Physics of the Solids 59 (2017) 960-966

Šiška F., Stratil L., Hadraba H., Fintová S., Kuběna I., Záležák T., Bártková D.: High temperature deformation mechanisms in the 14% Cr ODS alloy. Mater. Sci. Eng. A 689 (2017) 34-39

Schneeweiss O., Friák M., Dudová M., Holec D., Šob M., Kriegner D., Holý V., Beran P., George E., Neugebauer J., Dlouhý A.: Magnetic properties of the CrMnFeCoNi high-entropy alloy. Phys. Rev. B 96 (2017) 014437

Svoboda J., Fischer F.: Incorporation of vacancy generation/annihilation into reactive diffusion concept - Prediction of possible Kirkendall porosity. Comp. Mater. Sci. 127 (2017) 136-140

Sklenička V., Kuchařová K., Kvapilová M., Král P., Dvořák J.: Combination of Experiments and Continuum Damage Mechanics Approach for Prediction of Creep Fracture in an Advanced 9%Cr Steel. Solid State Phenom. 258 (2017) 591-594

Dymáček P., Dobeš F., Kloc L.: Small Punch Testing of Sanicro 25 Steel and its Correlation with Uniaxial Tests. Key Engineering Materials. Key Eng. Mater. 734 (2017) 70-76

Čelko L., Jech D., Dvořák J., Šulák I., Klakurková L., Obrtlík K.: Durability of Amorphous and Crystalline BMAS Thermal Barrier Coatings Produced by Plasma Spraying. Solid State Phenom. 258 (2017) 383-386

Blum W., Král P., Dvořák J., Petrenec M., Eisenlohr P., Sklenička V.: In situ study of thermally activated flow and dynamic restoration of ultrafine-grained pure Cu at 373 K. J. Mater. Res. 32 (2017) 1-8

Záležák T., Šiška F., Stratil L., Luptáková N., Šmíd M., Bártková D., Svoboda J., Dlouhý A.: A Numerical Analysis of Deformation Processes in Oxide Dispersion-Strengthened Materials - Influence of Dislocation-Particle Interactions. Solid State Phenom. 258 (2017) 106-109

Svoboda J., Fischer F., Kozeschnik E.: Thermodynamic modelling of irreversible processes. EMU Notes Mineral. 16 (2017) 181-214

Král P., Blum W., Dvořák J., Eisenlohr P., Petrenec M., Sklenička V.: Dynamic restoration of severely predeformed, ultrafine-grained pure Cu at 373 K observed in situ. Mater. Character. 134 (2017) 329-334

Takizawa Y., Kajita T., Král P., Masuda T., Watanabe K., Yumoto M., Otagiri Y., Sklenička V., Horita Z.: Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS). Mater. Sci. Eng. A 682 (2017) 603-612

Sklenička V., Kuchařová K., Dvořák J., Kvapilová M., Král P.: Creep Damage Tolerance Factor delta of Selected Creep-Resistant Steels. Key Eng. Mater. 754 (2017) 47-50

Betekhtin V., Kadomtsev A., Narykova M., Amosová O., Sklenička V.: Defect Structure and Mechanical Stability of Microcrystalline Titanium . Technical Phys. Lett. 43 (2017) 38-44

Rebhan B., Svoboda J., Panholzer M.: A thermodynamic study of voiding phenomena in Cu-Cu thermo-compression wafer bonding. Microsys. Technol. 1 (2017) 1-8

Hackl K., Fischer F., Svoboda J.: A variational approach to the modelling of grooving in a three-dimensional setting. Acta Mater. 129 (2017) 331-342

Fischer F., Zickler G., Svoboda J.: Calibration of phase field parameters demonstrated on kinetics of a shrinking single grain. Philos. Mag. Lett. 97 (2017) 92-100

Hadraba H., Chlup Z., Dlouhý A., Dobeš F., Roupcová P., Vilémová M., Matějíček J.: Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy. Mater. Sci. Eng. A 689 (2017) 252-256

Dymáček P., Dobeš F., Kloc L.: Determination of Mechanical Properties of Metallic Materials from Very Small Volumes by Means of Small Punch Test. Key Eng. Mater. 741 (2017) 116-121

Král P., Dvořák J., Kvapilová M., Blum W., Sklenička V.: The influence of long-term annealing at room temperature on creep behaviour of ECAP-processed copper. Mater. Lett. 188 (2017) 235-238

Sklenička V., Kuchařová K., Kvapilová M., Svoboda M., Král P., Dvořák J.: Creep properties of simulated heat-affected zone of HR3C austenitic steel. Mater. Character. 128 (2017) 238-247

Král P., Sklenička V., Kuchařová K., Svobodová M., Kvapilová M., Dvořák J.: Development of Creep Damage in Similar Weld Joints of P92 Steel Pipe. Solid State Phenom. 270 (2017) 162-167

Záležák T., Svoboda J., Dlouhý A.: High temperature dislocation processes in precipitation hardened crystals investigated by a 3D discrete dislocation dynamics. Int. J. Plast. 97 (2017) 1-23

Andrés D., Dymáček P., Lacalle R., Alvarez J.: Influence of the Upper Die and of the Indenter Material on the Time to Rupture of Small Punch Creep Tests. Key Eng. Mater. 734 (2017) 119-127

---

Kunčická L., Kočích R., Král P., Pohludka M., Marek M.: Effect of strain path on severely deformed aluminium. Mater. Lett. 180 (2016) 280-283

Kočích R., Kunčická L., Král P., Lowe T.: Texture, deformation twinning and hardening in a newly developed Mg-Dy-Al-Zn-Zr alloy processed with high pressure torsion. Mater. & Design 90 (2016) 1092-1099

Spusta T., Svoboda J., Maca K.: Study of pore closure during pressure-less sintering of advanced oxide ceramics. Acta Mater. 155 (2016) 347-353

Betekhtin V., Kolobov Y., Golosová O., Dvořák J., Sklenička V., Kardashev B., Narykova M., Ivanov M.: Elastic modulus, microplastic properties and durability of titanium alloys for biomedical applications. Rev. Adv. Mater. Sci 45 (2016) 42-51

Andrés D., Dymáček P.: Study of the upper die clamping conditions in the small punch test. Theor. Appl. Fract. Mech. 86 (2016) 117-123

Otto F., Dlouhý A., Pradeep K., Kuběnová M., Raabe D., Eggeler G., George E.: Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures. Acta Mater. 112 (2016) 40-52

Mašek B., Khalaj O., Nový Z., Kubina T., Jirková H., Svoboda J., Štádler C.: Behaviour of new ODS alloys under single and multiple deformation. Mater. Technol. 50 (2016) 891-898

Riedl H., Svoboda J.: A model for strain hardening, recovery, recrystallization and grain growth with applications to forming processes of nickel base alloys. Mater. Sci. Eng. A 665 (2016) 175-183

Sklenička V., Kuchařová K., Kvapilová M., Král P., Dvořák J.: Creep Damage and Fracture in Advanced Tungsten Modified 9%Cr Ferritic Steel. Key Eng. Mater. 713 (2016) 183-186

Wu X., Wollgramm P., Somsen C., Dlouhý A., Kostka A., Eggeler G.: Double minimum creep of single crystal Ni-base superalloys. Acta Mater. 112 (2016) 242-260

Král P., Dvořák J., Jäger A., Kvapilová M., Horita Z., Sklenička V.: Creep properties of aluminium processed by ECAP. Kovové materiály 54 (2016) 441-451

Svoboda J., Fischer F.: A self-consistent model for thermodynamics of multicomponent. Scr. Mater. 126 (2016) 154-157

Uhlar R., Svoboda J., Jeřábek P., Povoden-Karadeniz E., Habler G.: Interlayer growth kinetics of a binary solid-solution based on the thermodynamic extremal principle: Application to the formation of spinelat periclase-corundum contacts. Amer. J. Sci. 316 (2016) 309-328

Dobeš F., Vodičková V., Veselý J., Kratochvíl P.: The Effect of Carbon Additions on the Creep Resistance of Fe-25Al-5Zr Alloy. Metall. Mater. Trans. A 47 (2016) 6070-6076

Luptáková N., Dymáček P., Pešlová F., Jurkovič Z., Barborák O., Stodola J.: Impact of residual elements on zinc quality in the production of zinc oxide. Metalurgija 55 (2016) 407-410

Svoboda J., Shan Y., Kozeschnik E., Fischer F.: A thermokinetic model for Mg-Si couple formation in Al-Mg-Si alloys. Model. Simul. Mater. Sci. Eng. 24 (2016) 1-16

Kočích R., Kunčická L., Král L., Macháčková A.: Sub-structure and mechanical properties of twist channel angular pressed aluminium. Mater. Character. 119 (2016) 75-83

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Effects of Grain Refinement by ECAP on the Deformation Resistance of Al Interpreted in Terms of Boundary-Mediated Processes. J. Mater. Sci. Technol. 32 (2016) 1309-1320

Svoboda J., Fischer F., Riedl H., Kozeschnik E.: Precipitate growth in multi-component systems with stress relaxation by diffusion and creep. Int. J. Plast. 82 (2016) 112-126

Svoboda J., Fratzl P., Zickler G., Fischer F.: A new treatment of transient grain growth. Acta Mater. 115 (2016) 442-447

Král P., Dvořák J., Blum W., Kudryavtsev E., Zherebtsov S., Salischev G., Kvapilová M., Sklenička V.: Creep study of mechanisms involved in low-temperature superplasticity of UFG Ti-6Al-4V processed by SPD. Mater. Character. 116 (2016) 84-90

Dobeš F., Dymáček P.: Fracture-based correlation of uniaxial and small punch creep data. Theor. Appl. Fract. Mech. 86 (2016) 34-38

Dymáček P.: Recent developments in small punch testing: Applications at elevated temperatures. Theor. Appl. Fract. Mech. 86 (2016) 25-33

Yardley V., Povstugar I., Choi P., Raabe D., Parsa A., Kostka A., Somsen C., Dlouhý A., Neukin K., George E., Eggeler G.: On Local Phase Equilibria and the Appearance of Nanoparticles in the Microstructure of Single-Crystal Ni-Base Superalloys. Adv. Eng. Mater. 18 (2016) 1556-1567

Křižík P., Balog M., Nosko M., Riglos M., Dvořák J., Bajana O.: Ultrafine-grained Al composites reinforced with in-situ Al3Ti filaments. Mater. Sci. Eng. A 657 (2016) 6-14

Fischer F., Svoboda J., Antretter T., Kozeschnik E.: Stress relaxation by power-law creep during growth of a misfitting precipitate. Int. J. Solids Struct. 96 (2016) 74-80

Sklenička V., Kuchařová K., Svobodová M., Kvapilová M., Král P., Horváth L.: Creep properties in similar weld joint of a thick-walled P92 steel pipe. Mater. Character. 119 (2016) 1-12

Šiška F., Stratil L., Šmíd M., Luptáková N., Záležák T., Bártková D.: Deformation and fracture behavior of the P91 martensitic steel at high temperatures. Mater. Sci. Eng. A 672 (2016) 1-6

Dobeš F., Pešička J., Kratochvíl P.: Creep of Fe3Al-based alloys with vanadium and carbon additions. Intermetallics 74 (2016) 60-64

Fischer F., Hackl K., Svoboda J.: Improved thermodynamic treatment of vacancy-mediated diffusion and creep. Acta Mater. 108 (2016) 347-354

---

Ženíšek J., Kozeschnik E., Svoboda J., Fischer F.: Modelling the role of compositional fluctuations in nucleation kinetics. Acta Mater. 91 (2015) 365-376

Sklenička V., Kuchařová K., Kvapilová M., Svoboda M.: Factors influencing creep resistance in discontinuously reinforced magnesium metal matrix composites. Kovové materiály 53 (2015) 221-229

Luptáková N., Ballóková B., Dymáček P.: Compressive creep testing of composites on the base of MoSi2 - SiC nanoparticles. Manufact. Technol. 15 (2015) 377-380

Votava J., Luptáková N., Kumbál V., Polcar A.: Hard-metal Spray Application on Blade Segment of Sugar Beet Harvester Cutting Units. Listy cukrovarnické a řepařské 131 (2015) 341-346

Parsa A., Wollgramm P., Buck H., Kostka A., Somsen C., Dlouhý A., Eggeler G.: Ledges and grooves at gama/gama´ interfaces of single crystal superalloys. Acta Mater. 90 (2015) 105-117

Votava J., Luptáková N., Kumbál V., Polcar A.: Minimizing abrasive-erosive wear of sugar beet harvesters. Listy cukrovarnické a řepařské 131 (2015) 284-289

Khalaj O., Mašek B., Jirková H., Ronešová A., Svoboda J.: Investigation on new creep-and oxidation-resistant materials. Mater. Sci. Technol. 49 (2015) 645-651

Luptáková N., Pizúrová N., Roupcová P., Dymáček P.: High Temperature Degradation of Powder-Processed Ni-based Superalloy. Materials Engineering - Materialove inzinierstvo 22 (2015) 85-94

Svoboda J., Zickler G., Kozeschnik E., Fischer F.: Kinetics of interstitial segregation in Cottrell atmospheres and grain boundaries. Philos. Mag. Lett. 95 (2015) 458-465

Dobeš F., Kratochvíl P., Pešička J., Vodičková V.: Microstructure and Creep Behavior of Fe-27Al-1Nb Alloys with Added Carbon. Metall. Mater. Trans. A 46 (2015) 1580-1587

Kuchařová K., Sklenička V., Kvapilová M., Svoboda M.: Creep and microstructural processes in a low-alloy 2.25%Cr1.6%W steel (ASTM Grade 23). Mater. Character. 109 (2015) 1-8

Fischer F., Svoboda J.: Stress, deformation and diffusion interactions in solids - A simulation study. J. Mech. Phys. Solids 78 (2015) 427-442

Kloc L.: Critical View on the Creep Modelling Procedures. Acta Phys. Pol. A 128 (2015) 540-542

Dobeš F., Dymáček P., Besterci M.: Estimation of themechanical properties of aluminium and analuminium composite after equal channel angular pressing by means of the small punch test. Mater. Sci. Eng. A 626 (2015) 313-321

Betekhtin V., Kolobov Y., Sklenička V., Kadomtsev A., Narykova M., Dvořák J., Golosov E., Kardashev B., Kuz menko I.: Effect of a defect structure on the static and long-term strength of submicrocrystalline VT1-0 titanium fabricated by plastic deformation during screw and lengthwise rolling. Tech. Phys. 60 (2015) 66-71

Fischer F., Svoboda J., Antretter T., Kozeschnik E.: Relaxation of a precipitate misfit stress state by creep in the matrix. Int. J. Plast. 64 (2015) 164-176

Záležák T., Dlouhý A.: 3D Discrete Dislocation Dynamics: Influence of Segment Mobility on Critical Shear Stress. Acta Phys. Pol. A 128 (2015) 654-656

Luptáková N., Matejička L., Krečmer N.: Norbert Setting of the optimal parameters of melted glass. Adv. Military Technol. 10 (2015) 73-79

Parsa A., Wollgramm P., Buck H., Somsen C., Kostka A., Povstugar I., Choi P., Raabe D., Dlouhý A., Müller J., Spiecker E., Demtroder K., Schreuer J., Neukin K., Eggeler G.: Advanced Scale Bridging Microstructure Analysis of Single Crystal Ni-Base Superalloys. Adv. Eng. Mater. 17 (2015) 216-230

Dobeš F., Kratochvíl P., Kejzlar P.: Creep of three-phase alloy Fe-30%Al-5.2%Zr. Kovové materiály 53 (2015) 127-132

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Correct Interpretation of Creep Rates: A Case Study of Cu. J. Mater. Sci. Technol. 31 (2015) 1065-1068

Kvapilová M., Kuchařová K., Kloc L., Sklenička V.: Creep Behaviour of a Zr-1 wt% Nb Alloy at Elevated Temperatures. Acta Phys. Pol. A 128 (2015) 548-551

Svoboda J., Shan Y., Fischer F.: A new self-consistent model for thermodynamics of binary solutions. Scr. Mater. 108 (2015) 27-30

Luptáková N., Pešlová F., Kliber J.: The study and microstructure analysis of zinc and zinc oxide. Metalurgija 54 (2015) 43-46

Betekhtin V., Dvořák J., Kadomtsev A., Kardashev B., Narykova M., Raab G., Sklenička V., Faizová S.: Durability and static strength of microcrystalline titanium VT1-0 obtained by equal-channel angular pressing. Technical Phys. Lett. 41 (2015) 80-82

---

Svoboda J., Fischer F.: Generalization of the Lifshitz-Slyozov-Wagner coarsening theory to non-dilute multi-component systems. Acta Mater. 79 (2014) 304-314

Luptáková N., Pešlová F.: Analysis of slag material in the production of zinc oxide. Deterioration, Dependability, Diagnostics 3 (2014) 237-242

Fischer F., Svoboda J.: Formation of bubbles by hydrogen attack and elastic-plastic deformation of the matrix. Int. J. Plast. 63 (2014) 110-123

Záležák T., Dlouhý A.: 3D discrete dislocation dynamics applied to a motion of low-angle tilt boundaries. Key Eng. Mater. 592-593 (2014) 87-91

Besterci M., Dobeš F., Kvačkaj T., Sülleiová K., Ballóková B., Velgosová O.: HIGH TEMPERATURE MECHANICAL PROPERTIES OF Al-Al4C3 COMPOSITE. Acta Metall. Slovaca 20 (2014) 326-340

Svoboda J., Fischer F.: Abnormal grain growth: a non-equilibrium thermodynamic model for multi-grain binary systems. Model. Simul. Mater. Sci. Eng. 22 (2014) 015013

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Effect of grain refinement by ECAP on creep of pure Cu. Mater. Sci. Eng. A 590 (2014) 423-432

Jácome L., Nörtershäuser P., Somsen C., Dlouhý A., Eggeler G.: On the nature of gama´ phase cutting and its effect on high temperature and low stress creep anisotropy of Ni-base single crystal superalloys. Acta Mater. 69 (2014) 246-264

Buršík J., Král P., Svoboda M., Dvořák J., Sklenička V.: Nanoindentation and microstructural study of Cu-Co alloys after severe plastic deformation. Key Eng. Mater. 592-593 (2014) 720-723

Svoboda J., Shan Y., Kozeschnik E., Fischer F.: Determination of depths of multiple traps for interstitials and their influence on diffusion kinetics. Model. Simul. Mater. Sci. Eng. 22 (2014) 065015

Dobeš F., Dymáček P.: On the correlation of fracture quantities in small punch test. Key Eng. Mater. 592-593 (2014) 275-278

Sklenička V., Král P., Dvořák J., Kvapilová M., Svoboda M.: Microstructure evolution and creep behavior in ECAP processed metallic materials. Mater. Sci. Forum 783-786 (2014) 2689-2694

Svoboda J., Stopka J., Fischer F.: Two-dimensional simulation of reactive diffusion in binary systems. Comp. Mater. Sci. 95 (2014) 309-315

Luptáková N., Pešlová F., Stodola J.: Effect of residual elements on quality of pure zinc. Deterioration, Dependability, Diagnostics 1 (2014) 147-161

Luptáková N., Král P., Dymáček P.: The influence of high temperature on the microstructure and properties of a Ni-based superalloy. Powder Metall. Progr. 14 (2014) 190-198

Svoboda J., Mori G., Prethaler A., Fischer F.: Determination of trapping parameters and the chemical diffusion coefficient from hydrogen permeation experiments. Corros. Sci. 82 (2014) 93-100

Kvapilová M., Dvořák J., Král P., Svoboda M., Sklenička V.: Application of the Monkman-Grant Relationship for Ultrafine-Grained Metallic Materials. Key Eng. Mater. 577-578 (2014) 137-140

Luptáková N., Pešlová F., Stodola J.: Impact of residual of elements on quality of metal zinc. Perner's Contacts 9 (2014) 74-82

Fischer F., Svoboda J.: Diffusion of elements and vacancies in multi-component systems. Prog. Mater. Sci. 60 (2014) 338-367

Buršík J., Buršíková V., Svoboda M., Král P., Dvořák J., Sklenička V.: Microstructure and local mechanical properties of Cu-Co alloys after severe plastic deformation. Key Eng. Mater. 586 (2014) 100-103

Holec D., Friák M., Dlouhý A., Neugebauer J.: Ab initio study of point defects in NiTi-based alloys. Phys. Rev. B 89 (2014) 014110

Fischer F., Svoboda J., Petryk H.: Thermodynamic extremal principles for irreversible processes in materials science. Acta Mater. 67 (2014) 1-20

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: What is stationary deformation of pure Cu?. J. Mater. Sci. 49 (2014) 2987-2997

Svoboda J., Fischer F., Klinger L., Rabkin E.: The effect of surface contact conditions on grain boundary interdiffusion in a semi-infinite bicrystal. Philos. Mag. 94 (2014) 3398-3412

Hrabovský J., Dobeš F., Horský J.: Small Punch Tests at Oxide Scales Surface of Structural Steel and Low Silicon Steel. Oxid. Met. 82 (2014) 297-310

Luptáková N., Anisimov E., Pešlová F.: The degradation of lining of rotary furnaces in the production of zinc oxide. Materials Engineering - Materialove inzinierstvo 21 (2014) 116-121

---

Appel F., Herrmann D., Fischer F., Svoboda J., Kozeschnik E.: Role of Vacancies in Work Hardening and Fatigue of TiAl Alloys. Int. J. Plast. 42 (2013) 83-100

Svoboda J., Shan Y., Kozeschnik E., Fischer F.: Determination of Depths of Interstitial Traps from Thermodynamic Data - A New View on Carbon Trapping and Diffusion. Model. Simul. Mater. Sci. Eng. 21 (2013) 065012

Hackl K., Fischer F., Klevakina K., Renner J., Svoboda J.: A Variational Approach to Grooving and Wetting. Acta Mater. 61 (2013) 1581-1591

Král P., Dvořák J., Zherebtsov S., Salischev G., Kvapilová M., Sklenička V.: Effect of severe plastic deformation on creep behaviour of a Ti-6Al-4V alloy. J. Mater. Sci. 13 (2013) 4789-4795

Onorbe E., Garces G., Dobeš F., Perez P., Adeva P.: High-Temperature Mechanical Behavior of Extruded Mg-Y-Zn Alloy Containing LPSO Phases. Metall. Mater. Trans. A 44A (2013) 2869-2883

Sklenička V., Kuchařová K., Kvapilová M., Svoboda M., Král P., Vidrich G.: Creep in an electrodeposited nickel. J. Mater. Sci. 48 (2013) 4780-4788

Kuběnová M., Zálešák J., Čermák J., Dlouhý A.: Impact of hydrogen-assisted heat treatments on microstructure and transformation path in a Ni-rich NiTi shape memory alloy. J. Alloys Comp. 577S (2013) 287-290

Svoboda J., Fischer F.: A New Computational Treatment of Reactive Diffusion in Binary Systems. Comp. Mater. Sci. 78 (2013) 39-46

Šedivý O., Beneš V., Ponížil P., Král P., Sklenička V.: Quantitative characterization of microstructure of pure copper processed by ECAP. Image Anal. & Stereol. 32 (2013) 65-75

Svoboda J., Fischer F., Schillinger W.: Formation of Multiple Stoichiometric Phases in Binary Systems by Combined Bulk and Grain Boundary Diffusion - Experiments and Model. Acta Mater. 61 (2013) 32-39

Fischer F., Svoboda J., Kozeschnik E.: Interstitial Diffusion in Systems with Multiple Sorts of Traps. Model. Simul. Mater. Sci. Eng. 21 (2013) 025008

Dobeš F., Kratochvíl P.: The effect of Zr addition on creep of Fe-30 at.% Al alloys. Intermetallics 43 (2013) 142-146

Besterci M., Dobeš F., Sülleiová K., Velgosová O.: Mechanical Properties of Al-Al4C3 Composite Produced by Mechanical Alloying. Univ. J. Mat. Sci. 1 (2013) 31-38

Dvořák J., Sklenička V., Betekhtin V., Kadomtsev A., Král P., Kvapilová M., Svoboda M.: The effect of high hydrostatic pressure on creep behaviour of pure Al and a Cu-0.2 wt% Zr alloy processed by ECAP. Mater. Sci. Eng. A 584 (2013) 103-113

Fischer F., Mori G., Svoboda J.: Modelling the Influence of Trapping on Hydrogen Permeation in Metals. Corros. Sci. 76 (2013) 382-389

Král P., Dluhoš J., Peřina V., Barták T.: 3D analysis of microstructure changes occurring during creep tests of ultra-fine grained materials. Mater. Sci. Forum 753 (2013) 46-49

---

Kratochvíl P., Dobeš F., Pešička J., Málek P., Buršík J., Vodičková V., Hanus P.: Microstructure and high temperature mechanical properties of Zr-alloyed Fe3Al-type aluminides: The effect of carbon. Mater. Sci. Eng. A 548 (2012) 175-182

Svoboda J., Fischer F., Uhlar R.: Modeling the Role of Sources and Sinks for Vacancies on the Kinetics of Diffusive Phase Transformation in Binary Systems with Several Stoichiometric Phases. Philos. Mag. Lett. 92 (2012) 67-76

Svoboda J., Fischer F., McDowell D.: Derivation of the phase field equations from the thermodynamic extremal principle. Acta Mater. 60 (2012) 396-406

Záležák T., Dlouhý A.: 3D Discrete Dislocation Dynamics Applied to Interactions between Dislocation Walls and Particles. Acta Phys. Pol. A 122 (2012) 450-452

Dobeš F., Besterci M., Ballóková B., Sülleiová K., Dymáček P.: Analysis of creep fracture in Al-Al4C3 composite after ECAP. Mater. Sci. Eng. A 532 (2012) 567-572

Fischer F., Svoboda J., Hackl K.: Modelling the Kinetics of a Triple Junction. Acta Mater. 60 (2012) 4704-4711

Manchuraju S., Kröger A., Somsen C., Dlouhý A., Eggeler G., Sarosi P., Anderson P., Mills M.: Pseudoelastic deformation and size effects during in situ transmission electron microscopy tensile testing of NiTi. Acta Mater. 60 (2012) 2770-2777

Svoboda J., Fischer F.: Modelling for hydrogen diffusion in metals with traps revisited. Acta Mater. 60 (2012) 1211-1220

Garces G., Onorbe E., Dobeš F., Perez P., Antoranz J., Adeva P.: Effect of microstructure on creep behaviour of cast Mg97Y2Zn1 (at.%) alloy. Mater. Sci. Eng. A 539 (2012) 48-55

---

Svobodová M., Tůmová D., Čmakal J., Sopoušek J., Kuchařová K.: Vliv přechodových svarových spojů na životnost tlakových systémů energetických zařízení. All for Power 5 (2011) 100-102

Kvapilová M., Sklenička V., Dvořák J., Král P.: An Evaluation of Creep Mechanisms in Ultrafine-Grained Metals. Key Eng. Mater. 465 (2011) 382-385

Svoboda J., Gamsjäger E., Fischer F., Liu Y., Kozeschnik E.: Diffusion Processes in a Migrating Interface - The Thick Interface Model. Acta Mater. 59 (2011) 4775-4786

Kočích R., Kursa M., Szurman I., Dlouhý A.: The influence of imposed strain on the development of microstructure and transformation characteristics of Ni-Ti shape memory alloys. J. Alloys Comp. 509 (2011) 2716-2722

Besterci M., Dobeš F., Ballóková B., Sülleiová K., Kvačkaj T.: Observation of Anisotropy of Creep Fracture Using Small Punch Test for Al-Al4C3 System Produced by Equal Channel Angular Pressing. High Temp. Mater. Proc. 30 (2011) 205-210

Svoboda J., Fischer F.: Modelling of the influence of the vacancy source and sink activity and the stress state on diffusion in crystalline solids. Acta Mater. 59 (2011) 1212-1219

Fischer F., Svoboda J.: Modelling of Reaction of Metallic Nanospheres with Gas. Solid State Phenom. 172-174 (2011) 1028-1037

Olbricht J., Yawny A., Pelegrina J., Dlouhý A., Eggeler G.: On the Stress-Induced Formation of R-phase in Ultra-Fine-Grained Ni-rich NiTi Shape Memory Alloys. Metall. Mater. Trans. A 42 (2011) 2556-2574

Svoboda J., Gamsjäger E.: Modelling of Diffusive and Massive Phase Transformations in Binary Systems - Thick Interface Parametric Model. Int. J. Mater. Res. 102 (2011) 666-673

Hackl K., Fischer F., Svoboda J.: A study on the principle of maximum dissipation for coupled and non-coupled non-isothermal processes in materials. Proc. Roy. Soc. Lond. A 467 (2011) 1186-1196

Frotscher M., Wu S., Simon T., Somsen C., Dlouhý A., Eggeler G.: Elementary Deformation and Damage Mechanisms During Fatigue of Pseudo-elastic Microstents. Adv. Biomat. 13 (2011) B181-B186

Dobeš F., Kratochvíl P., Vodičková V.: The effect of carbon and silicon additions on the creep properties of Fe-40 at.% Al type alloys at elevated temperatures. Intermetallics 19 (2011) 1526-1532

Kvapilová M., Kuchařová K., Sklenička V., Svoboda M., Hrbáček K.: Creep behaviour and microstructure changes of model cast Ni-Cr-W-C alloys. Procedia Eng. 10 (2011) 839-844

Záležák T., Dlouhý A.: 3D discrete dislocation modelling of high temperature plasticity. Key Eng. Mater. 465 (2011) 115-118

Král P., Dvořák J., Kvapilová M., Svoboda M., Beneš V., Ponížil P., Šedivý O., Sklenička V.: Quantitative Characterization of Microstructure in Copper Processed by ECAP. Mater. Sci. Forum 667-669 (2011) 235-240

Fischer F., Svoboda J.: Chemically and Mechanically Driven Creep Due to Generation and Annihilation of Vacancies with Non-ideal Sources and Sinks. Int. J. Plast. 27 (2011) 1384-1390

Dudová M., Kuchařová K., Barták T., Bei H., George E., Somsen C., Dlouhý A.: Creep in Directionally Solidified NiAl-Mo Eutectics. Scr. Mater. 65 (2011) 699-702

Dymáček P.: Short term creep small punch testing of P91 and P92 steels, observations and correlations with the numerical results. Key Eng. Mater. 465 (2011) 179-182

Fischer F., Svoboda J., Appel F., Kozeschnik E.: Modelling of Excess Vacancy Annihilation at Different Types of Sinks. Acta Mater. 59 (2011) 3463-3472

Svoboda J., Fischer F.: Stress Development During Reaction of Metallic Nanospheres with Gas. Acta Mater. 59 (2011) 61-67

Holec D., Friák M., Dlouhý A., Neugebauer J.: Ab initio study of pressure stabilized NiTi allotropes: Pressure-induced transformations and hysteresis loops. Phys. Rev. B 84 (2011) 224119

Svoboda J., Fischer F., Leindl M.: Transient Solute Drag in Migrating Grain Boundaries. Acta Mater. 59 (2011) 6556-6562

Ulrich C., Hashibon A., Svoboda J., Elsässer C., Helm D., Riedl H.: Diffusion kinetics in aluminium-gold bond contacts from first-principles density functional calculations. Acta Mater. 59 (2011) 7634-7644

---

Dymáček P., Milička K.: Creep small-punch testing and its numerical simulations. Mater. Sci. Eng. A 510-511 (2009) 444-449