Ing. Alice Chlupová, Ph.D.

---

Fintová S., Kuběna I., Chlupová A., Šulák I., Chlup Z., Trško L., Polák J.: Very high frequency induced fatigue damage. Theor. Appl. Fract. Mech. 133 (2024) 104590


Šulák I., Chlupová A., Poloprudský J., Svoboda J.: Cyclic plastic response of rotary swaged Fe-14Cr-10Al-4Y2O3 ODS alloy at 1000 -1200 °C. Mater. Character. 207 (2024) 113519


Šiška F., Fintová S., Chlup Z., Kuběna I., Jambor M., Šulák I., Chlupová A.: Numerical analysis of plastic deformation mechanisms in polycrystaline copper under cyclic loading with different frequencies. Int. J. Fatigue 188 (2024) 108524


Poloprudský J., Gamanov Š., Chlupová A., Klichová D., Nag A., Stolárik G., Hloch S.: Water droplet erosion assessment in the initial stages on AISI 316L using kernel average misorientation. Tribology International 191 (2024) 109165

---

Polák J., Chlupová A.: Mechanisms of intergranular fatigue crack initiation in polycrystalline materials. Procedia Struct. Integr. 43 (2023) 197-202


Chlupová A., Hloch S., Nag A., Šulák I., Kruml T.: Effect of pulsating water jet processing on erosion grooves and microstructure in the subsurface layer of 25CrMo4 (EA4T) steel. Wear 524-525 (2023) 204774

---

Chlupová A., Šulák I., Babinský T., Polák J.: Intergranular fatigue crack initiation in polycrystalline copper. Mater. Sci. Eng. A 848 (2022) 143357

Man J., Šulák I., Chlupová A., Kuběna I., Douša L., Polák J.: Cyclic plasticity and LCF behavior of AISI 316L austenitic stainless steel manufactured by selective laser melting (SLM). Ninth International Conference on Low Cycle Fatigue 1 (2022) 241-246

Šulák I., Babinský T., Chlupová A., Milovanović A., Náhlík L.: Effect of building direction and heat treatment on mechanical properties of Inconel 939 prepared by additive manufacturing. Journal of Mechanical Science and Technology 36 (2022) 1-6

---

Čuha D., Nag A., Chlupová A., Hloch S.: Erosion of Titanium and Aluminium Alloys Using Pulsating Water Jet: Effect of Standoff Distance. Lecture Notes in Mechanical Engineering (2021) 56-66

Chlupová A., Šulák I., Kunčická L., Kocich R., Svoboda J.: Microstructural aspects of new grade ODS alloy consolidated by rotary swaging. Mater. Character. 181 (2021) 111477

Poloprudský J., Chlupová A., Kruml T., Hloch S.: Identification of Local Microplasticity on Ti6Al4V After Impingement of Periodically Acting Water Clusters. Lecture Notes in Mechanical Engineering Advances (2021) 63-74

Švábenská E., Chlupová A., Foldyna J., Schneeweiss O.: Evolution of Microstructure of Silicon Steel After Pulsating Water Jet Treatment. Lecture Notes in Mechanical Engineering Advances (2021) 219-228

Poloprudský J., Chlupová A., Kruml T., Hloch S., Hlaváček P., Foldyna J.: Effect of Standoff Distance on the Erosion of Various Materials. Lecture Notes in Mechanical Engineering Advances (2021) 164-171

Fintová S., Kuběna I., Chlupová A., Jambor M., Šulák I., Chlup Z., Polák J.: Frequency-dependent fatigue damage in polycrystalline copper analyzed by FIB tomography. Acta Mater. 211 (2021) 116859

Poloprudský J., Chlupová A., Šulák I., Kruml T., Hloch S.: Surface and Subsurface Analysis of Stainless Steel and Titanium Alloys Exposed to Ultrasonic Pulsating Water Jet. Materials 14 (2021) 5212

---

Chlupová A., Šulák I., Svoboda J.: High Temperature Cyclic Plastic Response of New-Generation ODS Alloy. Metals 10 (2020) 804

Hloch S., Srivastava M., Nag A., Müller M., Hromasová M., Svobodová J., Kruml T., Chlupová A.: Effect of pressure of pulsating water jet moving along stair trajectory on erosion depth, surface morphology and microhardness. Wear 452-453 (2020) 203278

Chlupová A., Heczko M., Obrtlík K., Dlouhý A., Kruml T.: Effect of heat-treatment on the microstructure and fatigue properties of lamellar gama-TiAl alloyed with Nb, Mo and/or C. Mater. Sci. Eng. A 786 (2020) 139427

Švábenská E., Pizúrová N., Roupcová P., Chlupová A., Brajer J., Foldyna J., Schneeweiss O.: Effect of shock wave on microstructure of silicon steel. Surfaces and Interfaces 20 (2020) 100415-100425

Chlupová A., Poczklán L., Man J., Mazánová V., Heczko M., Kruml T.: Character of Fatigue Damage under Axial, Torsional and Biaxial Loading of 316L Stainless Steel. Defect Diffus. Forum 405 (2020) 264-270

---

Mazánová V., Heczko M., Škorík V., Chlupová A., Polák J., Kruml T.: Microstructure and martensitic transformation in 316L austenitic steel during multiaxial low cycle fatigue at room temperature. Mater. Sci. Eng. A 767 (2019) 138407

Tinoco Navarro H., Holzer J., Pikálek T., Buchta Z., Lazar J., Chlupová A., Kruml T., Hutař P.: Determination of elastic parameters of Si3N4 thin films by means of a numerical approach and bulge tests. Thin Solid Films 672 (2019) 66-74

---

Man J., Järvenpää A., Jaskari M., Kuběna I., Fintová S., Chlupová A., Karjalainen L., Polák J.: Cyclic deformation behaviour and stability of grain-refined 301LN austenitic stainless structure. MATEC Web Conf. 165 (2018) 06005

---

Man J., Chlupová A., Kuběna I., Kruml T., Man O., Järvenpää A., Karjalainen L., Polák J.: LCF behaviour of 301LN steel: coarse-grained vs. UFG-bimodal structure. Eighth International Conference on Low Cycle Fatigue 1 (2017) 205-210

Chlupová A., Heczko M., Obrtlík K., Beran P., Kruml T.: Effect of Alloying and Thermal Processing on Mechanical Properties of TiAl Alloys. Solid State Phenom. 258 (2017) 501-505

Hutař P., Poduška J., Šmíd M., Kuběna I., Chlupová A., Náhlík L., Polák J., Kruml T.: Short fatigue crack behaviour under low cycle fatigue regime. Int. J. Fatigue 103 (2017) 207-215

Karol M., Chlupová A., Mazánová V., Kruml T.: Fatigue crack initiation and growth in 316L steel in torsional cyclic loading. Eng. Mech. 23 (2017) 434-437

Holzer J., Pikálek T., Buchta Z., Lazar J., Tinoco Navarro H., Chlupová A., Kruml T.: Development of the bulge test equipment for measuring mechanical properties of thin films. METAL 2017 Conf. Proc 26 (2017) 1053-1058

---

Chlupová A., Heczko M., Obrtlík K., Polák J., Roupcová P., Beran P., Kruml T.: Mechanical properties of high niobium TiAl alloys doped with Mo and C. Mater. & Design 99 (2016) 284-292

Chlupová A., Chlup Z., Kruml T.: Fatigue properties and microstructure of quasicrystalline AlFeCrTi alloy. Int. J. Fatigue 91 (2016) 251-256

Hutař P., Poduška J., Chlupová A., Šmíd M., Kruml T., Náhlík L.: Description of short fatigue crack propagation under low cycle fatigue regime. Procedia Struct. Integr. 2 (2016) 3009-3016

---

Polák J., Petrenec M., Chlupová A., Tobiáš J., Petráš R.: Cyclic plastic response of nickel-based superalloy at room and at elevated temperatures. Materials Testing 57 (2015) 119-125

---

Petrenec M., Polák J., Tobiáš J., Šmíd M., Chlupová A., Petráš R.: Analysis of cyclic plastic response of nickel based IN738LC superalloy. Int. J. Fatigue 65 (2014) 44-50

Chlupová A., Obrtlík K., Beran P., Heczko M., Polák J., Kruml T.: Monotonic and cyclic properties of TiAl alloys doped with Nb, Mo and C. Procedia Eng. 74 (2014) 405-408

Kruml T., Chlupová A., Obrtlík K.: Cyclic deformation of a modern TiAl alloy at high temperatures. Adv. Mater. Res. 891-892 (2014) 1131-1136

Chlupová A., Man J., Kuběna I., Polák J., Karjalainen L.: LCF behaviour of ultrafine grained 301LN stainless steel. Proc. Eng. 74 (2014) 147-150

---

Šmíd M., Petrenec M., Polák J., Obrtlík K., Chlupová A.: Analysis of the Effective and Internal Cyclic Stress Components in the Inconel Superalloy Fatigued at Elevated Temperature. Adv. Mater. Res. 278 (2011) 393-398

Polák J., Petrenec M., Kruml T., Chlupová A.: Cyclic plastic response and fatigue life in symmetric and asymmetric cyclic loading. Procedia Eng. 10 (2011) 568-577

---

Obrtlík K., Chlupová A., Petrenec M., Polák J.: Low cycle fatigue of cast superalloy Inconel 738LC at high temperature. Key Eng. Mater. 385-387 (2008) 581-584

---

Chlup Z., Todd I., GARCIA-ESCORIAL A., Lieblich M., Chlupová A., O´Dwyer J.: Bulk nanostructured aluminium alloy Al93Fe3Cr2Ti2: Processing and characterisation. Mater. Sci. Forum 426 (2003) 2417-2422