Dr. Ing. Filip Šiška, Ph.D.

---

Šiška F., Babinský T., Šulák I., Gálíková M., Kuběna I.: Numerical analysis of plastic behavior anisotropy of additively manufactured IN939 superalloy subjected to cyclic loading at high temperatures. Model. Simul. Mater. Sci. Eng. 33 (2025) 055022

Bertolla L., Taveri G., Mácová P., Sotiriadis K., Šiška F., Nádaždy V.: Improving the cellulose/metakaolin geopolymer composite properties through a novel low-water approach. Mater. Lett. 383 (2025) 137967

Pelegatti M., Brůža J., Jambor M., Šiška F., Man J.: On microstructure evolution and damage onset in 316 L steel produced by laser-powder bed fusion during the early stages of low cycle fatigue loading. Mater. Character. 228 (2025) 115448

Sahle Y., Moník M., Ahmed S., Hadraba H., Chlup Z., Šiška F., Kučera L., Souron A., Brandt S., Arthur K.: Ethnographic toolstone heat treatment reveals distinctive motives and patterns of material transformation. Sci. Rep. 15 (2025) 12854

Ravasio C., Conconi S., Stehle D., Pude F., Poloprudský J., Šiška F., Chlupová A., Hloch S.: Erosion in the contact periphery in the initiation zone due to erosion of abrasive water jet. The International Journal of Advanced Manufacturing Technology 136 (2025) 3641-3653

---

Jambor M., Trško L., Šulák I., Šiška F., Bagherifard S., Guagliano M., Florková Z.: Application of shot peening to improve fatigue properties via enhancement of precipitation response in high-strength Al-Cu-Li alloys. Journal of Materials Research and Technology 33 (2024) 9595-9602

Hadraba H., Stratil L., Šiška F., Chlup Z., Čížek J., Jambor M., Bertolla L.: Grain size manipulation of the Eurofer steel via mechanical alloying. J. Mater. Sci. 59 (2024) 11546-11558

Hloch S., Poloprudský J., Šiška F., Babinský T., Nag A., Chlupová A., Kruml T.: Erosion development in AISI 316L stainless steel under pulsating water jet treatment. Engineering Science and Technology 50 (2024) 101630

Pazderová M., Hojna A., Hadraba H., Stratil L., Šiška F., Chocholoušek M., Bricín D., Čížek J.: Liquid lead resistance and cracking of novel 1Al-Sc-Y ODS Eurofer steel. J. Nucl. Mater. 602 (2024) 155306

Šiška F., Fintová S., Chlup Z., Kuběna I., Jambor M., Šulák I., Chlupová A.: Numerical analysis of plastic deformation mechanisms in polycrystaline copper under cyclic loading with different frequencies. Int. J. Fatigue 188 (2024) 108524

---

Šiška F., Stratil L., Chlup Z., Kotoulova H., Machů Z.: Poisson´s ratio reduction by geometrical patterns implemented in solid composites. MRS Commun. 13 (2023) 486-491

Chlup Z., Drdlík D., Hadraba H., Ševeček O., Šiška F., Erhart J., Maca K.: Temperature effect on elastic and fracture behaviour of lead-free piezoceramic BaTiO3. J. Eur. Ceram. Soc. 43 (2023) 1509-1522

Šiška F., Drozdenko D., Máthis K., Čížek J., Guo T., Barnett M.: Three-dimensional crystal plasticity and HR-EBSD analysis of the local stress-strain fields induced during twin propagation and thickening in magnesium alloys. J. Magnes. Alloys 11 (2023) 657-670

---

Šiška F., Hadraba H., Stratil L., Fintová S., Kuběna I.: Effects of grains´ morphology on strengthening mechanisms in ODM401 14Cr ODS steel at high temperatures. Mater. Sci. Eng. A 852 (2022) 143663

---

Šiška F., Stratil L., Čížek J., Guo T., Barnett M.: Numerical analysis of twin-precipitate interactions in magnesium alloys. Acta Mater. 202 (2021) 80-87

Ostapovec A., K. K., Máthis K., Šiška F.: Interaction of Migrating Twin Boundaries with Obstacles in Magnesium. Metals 11 (2021) 154

Fintová S., Kuběna I., Jarý M., Luptáková N., Stratil L., Šiška F., Svoboda J.: Creep properties of heat-treated Fe-Al-O ODS alloy. Kovové materiály 59 (2021) 39-50

Máthis K., Knapek M., Šiška F., Harcuba P., Ugi D., Ispánovity P., Groma I., Shin K.: On the dynamics of twinning in magnesium micropillars. Mater. & Design 203 (2021) 109563

Čížek J., Kovařík O., Čupera J., Kondas J., Bajer T., Šiška F., Janovská M., Seiner H.: Measurement of mechanical and fatigue properties using unified, simple-geometry specimens: Cold spray additively manufactured pure metals. Surf. Coat. Technol. 412 (2021) 126929

---

Akhtar M., Ilyas K., Dlouhý I., Šiška F., Boccaccini A.: Electrophoretic Deposition of Copper(II)-Chitosan Complexes for Antibacterial Coatings. Int. J. Mol. Sci. 21 (2020) 2637

Fintová S., Kuběna I., Luptáková N., Jarý M., Šmíd M., Stratil L., Šiška F., Svoboda J.: Development of advanced Fe-Al-O ODS alloy microstructure and properties due to heat treatment. J. Mater. Res. 35 (2020) 2789-2797

Šiška F., Čech J., Haušild P., Hadraba H., Chlup Z., Husák R., Stratil L.: Twinning in CoCrFeNiMn high entropy alloy induced by nanoindentation. Mater. Sci. Eng. A 784 (2020) 139297

Hadraba H., Chlup Z., Drdlík D., Šiška F.: Characterisation of mechanical and fracture behaviour of Al2O3/ZrO2/BaTiO3 laminate by indentation. J. Eur. Ceram. Soc. 40 (2020) 4799-4807

Šiška F., Čížek J., Seiner H., Dlouhý I.: Numerical analysis of geometrically induced hardening in planar architectured materialss. Composite Structures 233 (2020) 111633-111643

Janovská M., Sedlák P., Čížek J., Koller M., Šiška F., Seiner H.: Characterization of bonding quality of a cold-sprayed deposit by laser resonant ultrasound spectroscopy. Ultrasonics 106 (2020) 106140

Chlup Z., Novotná L., Šiška F., Drdlík D., Hadraba H.: Effect of residual stresses to the crack path in alumina/zirconia laminates. J. Eur. Ceram. Soc. 40 (2020) 5810-5818

---

Dlouhý I., Řehořek L., Seiner H., Čížek J., Šiška F.: Architectured Multi-Metallic Structures Prepared by Cold Dynamic Spray Deposition. Key Eng. Mater. 810 (2019) 107-112

Masini A., Strohbach T., Šiška F., Chlup Z., Dlouhý I.: Electrolyte-Supported Fuel Cell: Co-Sintering Effects of Layer Deposition on Biaxial Strength of Layer Deposition on Biaxial Strength. Materials 12 (2019) 306

Čížek J., Kovařík O., Šiška F., Bensch J., Čupera J., Matějková M., Siegl J., Chráska T., Khor K.: Increasing Fatigue Endurance of Hydroxyapatite and Rutile Plasma Sprayed Biocomponents by Controlling Deposition In-Flight Properties. ACS Biomaterials Science & Engineering 5 (2019) 1703-1714

---

Záležák T., Šiška F., Stratil L., Fintová S., Horník V., Bártková D., Husák R., Svoboda J., Dlouhý A.: An integration of 3D discrete dislocation dynamics with numerical tensile testing. Acta Phys. Pol. A 134 (2018) 777-780

Stratil L., Šiška F., Hadraba H., Dlouhý I.: The size effect on J-R curve for construction steels and its prediction by simplified mechanical model. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 6B (2018) 141606

Guo T., Chao Q., Šiška F., Cheng J., Varma R., Barnett M.: Analysing single twinning events in Mg-6Zn using nanoindentation. J. Alloys Comp. 768 (2018) 510-516

Guo T., Šiška F., Cheng J., Barnett M.: Initiation of basal slip and tensile twinning in magnesium alloys during nanoindentation. J. Alloys Comp. 731 (2018) 620-630

Masini A., Šiška F., Ševeček O., Chlup Z., Dlouhý I.: Elastic properties of multi-layered ceramic systems for SOCs, International Journal of Applied Ceramic Technology. J. Appl. Ceram. Technol. 15 (2018) 370-379

Čížek J., Brožek V., Chráska T., Lukáč F., Medřický J., Mušálek R., Tesař T., Šiška F., Antoš Z., Čupera J., Matějková M., Špotz Z., Houdková S., Kverka M.: Silver-Doped Hydroxyapatite Coatings Deposited by Suspension Plasma Spraying . J. Thermal Spray Technol. 27 (2018) 1333-1343

Šiška F., Stratil L., Hadraba H., Fintová S., Kuběna I., Horník V., Husák R., Bártková D., Záležák T.: Strengthening mechanisms of different oxide particles in 9Cr ODS steel at high temperatures. Mater. Sci. Eng. A 732 (2018) 112-119

---

Stratil L., Šiška F., Dlouhý I., Serrano M.: The application of miniaturize three-point-bend specimens for determination of the reference temperature of A533 Cl.1 Steel. J. Press. Vess. Technol. 134 (2017) 041410

Šiška F., Stratil L., Hadraba H., Fintová S., Kuběna I., Záležák T., Bártková D.: High temperature deformation mechanisms in the 14% Cr ODS alloy. Mater. Sci. Eng. A 689 (2017) 34-39

Šiška F., Guo T., Stratil L., Čížek J., Barnett M.: Numerical study of stress distribution and size effect during AZ31 nanoindentation. Comp. Mater. Sci. 126 (2017) 393-399

Hadraba H., Husák R., Stratil L., Šiška F., Chlup Z., Puchý V., Michalička J.: Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications. Fusion Eng. & Design 124 (2017) 1028-1032

Stratil L., Šiška F., Hadraba H., Fintová S., Mrňa T., Dlouhý I.: The effect of specimen size for the P91 steel at elevated and high temperatures. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 1A (2017) 131595

Stratil L., Šiška F., Hadraba H., Bártková D., Fintová S., Puchý V.: Fracture behaviour of the ODS steels prepared by internal oxidation. Fusion Eng. & Design 124 (2017) 1108-1111

Záležák T., Šiška F., Stratil L., Luptáková N., Šmíd M., Bártková D., Svoboda J., Dlouhý A.: A Numerical Analysis of Deformation Processes in Oxide Dispersion-Strengthened Materials - Influence of Dislocation-Particle Interactions. Solid State Phenom. 258 (2017) 106-109

Šiška F., Stratil L., Čížek J., Ghaderi A., Barnett M.: Numerical analysis of twin thickening process in magnesium alloys. Acta Mater. 124 (2017) 9-16

Bártková D., Šmíd M., Mašek B., Svoboda J., Šiška F.: Kinetic study of static recrystallization in an Fe-Al-O ultra-fine-grained nanocomposite. Philos. Mag. Lett. 97 (2017) 379-385

Dlouhý I., Stratil L., Šiška F.: Subsized Specimens for Fracture Resistance Characterisation Including Transferability Issues. Key Eng. Mater. 741 (2017) 110-115

---

Šiška F., Stratil L., Šmíd M., Luptáková N., Záležák T., Bártková D.: Deformation and fracture behavior of the P91 martensitic steel at high temperatures. Mater. Sci. Eng. A 672 (2016) 1-6

Tingting G., Šiška F., Matthew R., Barnett M.: Distinguishing between slip and twinning events during nanoindentation of magnesium alloy AZ31. Scr. Mater. 110 (2016) 10-13

---

Stratil L., Šiška F., Hadraba H., Dlouhý I.: The prediction of size effect on J-R curve for Eurofer97 steel by simplified mechanical model. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 1A (2015) 117787

Šiška F., Stratil L., Dlouhý I., Barnett M.: Modelling of the stiffness evolution of truss core structures damaged by plastic buckling. Finite Elem. Anal. Design 100 (2015) 1-11

Stratil L., Dlouhý I., Šiška F., Serrano M.: The application of miniaturized three-point-bend specimens for determination of the reference temperature of JRQ steel. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 1B (2015) 117787

Čížek J., Matějková M., Dlouhý I., Šiška F., Kay C., Karthikeyan J., Kuroda S., Kovařík O., Siegl J., Loke K., Khor K.: Influence of Cold-Sprayed, Warm-Sprayed and Plasma-Sprayed Layers Deposition on Fatige Properties of Steel Specimens. J. Thermal Spray Technol. 24 (2015) 758-768

Šiška F., Tawfeeq A., Dlouhý I., Barnett M.: Stiffness and strength degradation of damaged truss core composites. Composite Struct. 125 (2015) 287-294

Číslo	Název
18-07140S	Víceúrovňová analýza interakcí dvojčat s mikrostrukturou v HCP kovech a slitinách
GJ15-21292Y	Lomové chování oxidicky zpevněných slitin na bázi železa za vysokých teplot