Institute of Physics of Materials AS CR, v. v. i. > Projects > Modernization of Infrastructure for the Study and Application of Advanced Materials (m-IPMinfra)

Modernization of Infrastructure for the Study and Application of Advanced Materials (m-IPMinfra)

Investigatorprof. Ing. Luboš Náhlík, Ph.D.
Number of ProjectCZ.02.1.01/0.0/0.0/16_013/0001823
AgencyMinisterstvo školství, mládeže a tělovýchovy
Duration2017-03-31 - 2021-03-30

Anotace
The project focuses on modernisation of the research infrastructure IPMinfra with equipment necessary for comprehensive study of material (mainly long-term) properties of advanced materials. At the same time, the project will support the research activity and its quality at IPM. The modernised and competitive equipment can be expected to contribute to intensified co-operation with leading research institutions, increased publication activities and more engagement to international projects.

2022

Vasić M., Žák T., Minić D.: Kinetics and influence of thermally induced crystallization of Fe,Ni-containing phases on thermomagnetic properties of Fe40Ni40B12Si8 amorphous alloy. J. Therm. Anal. Calorim. 147 (2022) 3543-3551

Gomez J., Sulleiro M., Dolečková A., Pizúrová N., Medalová J., Bednařík A., Preisler J., Nečas D., Zajíčková L.: Structure elucidation of multicolor emissive graphene quantum dots towards cell guidance. Materials Chemistry Frontiers 6 (2022) 145-154


2021

Vasić M., Žák T., Pizúrová N., Stojković Simatović I., Minić D.: Influence of Thermal Treatment on Microstructure and Corrosion Behavior of Amorphous Fe40Ni40B12Si8 Alloy. Metall. Mater. Trans. A 52 (2021) 34-45

Fintová S., Kuběna I., Jarý M., Luptáková N., Stratil L., Šiška F., Svoboda J.: Creep properties of heat-treated Fe-Al-O ODS alloy. Kovové materiály 59 (2021) 39-50

Březina M., Hasoňová M., Fintová S., Doležal P., Rednyk A., Wasserbauer J.: Mechanical and structural properties of bulk magnesium materials prepared via spark plasma sintering.. Materials Today Commun. 28 (2021) 102569

Babinský T., Kuběna I., Šulák I., Kruml T., Tobiáš J., Polák J.: Surface relief evolution and fatigue crack initiation in René 41 superalloy cycled at room temperature. Mater. Sci. Eng. A 819 (2021) 141520


2020

Polatidis E., Šmíd M., Kuběna I., Hsu W., Laplanche G., Van Swygenhoven H.: Deformation mechanisms in a superelastic NiTi alloy: An in-situ high resolution digital image correlation study. Mater. & Design 191 (2020) 108622

Jambor M., Kajánek D., Fintová S., Bronček J., Hadzima B., Guagliano M., Bagherifard S.: Directing Surface Functions by Inducing Ordered and Irregular Morphologies at Single and Two-Tiered Length Scales. Adv. Eng. Mater. 2020 (2020) 20200105

Fintová S., Kuběna I., Palán J., Mertová K., Duchek M., Hutař P., Pastorek F., Kunz L.: Influence of sandblasting and acid etching on fatigue properties of ultra-fine grained Ti grade 4 for dental implants. J. Mech. Behav. Biomed. Mater. 111 (2020) 104016

Oplt T., Jambor M., Náhlík L., Hutař P.: Numerical simulations of semi-elliptical fatigue crack propagation. AIP Conference Proceedings 2309 (2020) 020005

Moravčík I., Horník V., Minárik P., Li L., Dlouhý I., Janovská M., Raabe D., Li Z.: Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy. Mater. Sci. Eng. A 781 (2020) 139242

Drábiková J., Fintová S., Ptáček P., Kuběna I., Březina M., Wasserbauer J., Doležal P., Pastorek F.: Structure and growth kinetic of unconventional fluoride conversion coating prepared on wrought AZ61 magnesium alloy. Surf. Coat. Technol. 399 (2020) 126101

Kunčická L., Kocich R., Klečková Z.: Effects of Sintering Conditions on Structures and Properties of Sintered Tungsten Heavy Alloy. Materials 13 (2020) 2338

Dobeš F., Dymáček P., Friák M.: Creep of Heusler-type alloy Fe-25Al-25Co. Crystals 10 (2020) 52

Hlaváček A., Křivánková J., Pizúrová N., Václavek T., Foret F.: Photon-upconversion barcode for monitoring an enzymatic reaction with a fluorescence reporter in droplet microfluidics. Analyst 145 (2020) 7718-7723

Fintová S., Kuběna I., Trško L., Horník V., Kunz L.: Fatigue behavior of AW7075 aluminum alloy in ultra-high cycle fatigue region. Mater. Sci. Eng. A 774 (2020) 138922


2019

Hadzima B., Pastorek F., Borko K., Fintová S., Kajánek D., Bagherifard S., Gholami-Kermanshahi M., Trško L., Pastorková J., Brezina J.: Effect of phosphating time on protection properties of hurealite coating: Differences between ground and shot peened HSLA steel surface. Surf. Coat. Technol. 375 (2019) 608-620

Kvapilová M., Dvořák J., Král P., Hrbáček K., Sklenička V.: Creep behaviour and life assessment of a cast nickel - base superalloy MAR - M247. High Temp. Mater. Proc. 38 (2019) 590-600

Vojtek T., Pokorný P., Náhlík L., Herrero D., Hutař P.: Crack Closure in the Near-threshold Region in Metallic Materials. Procedia Struct. Integr. 23 (2019) 481-486

Oplt T., Šebík M., Berto F., Náhlík L., Pokorný P., Hutař P.: Strategy of plasticity induced crack closure numerical evaluation. Theor. Appl. Fract. Mech. 102 (2019) 59-69

Dobeš F., Dymáček P., Komazaki S., Li Y.: Towards the development of a universal formula for conversion of Small Punch data to Conventional Creep data. Proc. 10th Japan-China Symp. High Temp. Strength of Mater. - (2019) 370-373

Dymáček P., Dobeš F., Andrés D.: Notch sensitivity of Sanicro 25 in small punch creep test. Theor. Appl. Fract. Mech. 100 (2019) 383-389

Horník V., Fintová S., Šmíd M., Hutař P., Hrbáček K., Kunz L.: Interaction of fatigue and creep in MAR-M 247 superalloy. Procedia Struct. Integr. 23 (2019) 197-202

Hlaváček A., Mickert M., Soukka T., Lahtinen S., Tallgren T., Pizúrová N., Król A., Gorris H.: Large-Scale Purification of Photon-Upconversion Nanoparticles by Gel Electrophoresis for Analogue and Digital Bioassays. Anal. Chem. 91 (2019) 1241-1246

Sofinowski K., Šmíd M., Kuběna I., Vives S., Casati N., Godet S., Van Swygenhoven H.: In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting. Acta Mater. 179 (2019) 224-236

Oplt T., Hutař P., Pokorný P., Náhlík L., Chlup Z., Berto F.: Effect of the free surface on the fatigue crack front curvature at high stress asymmetry. Int. J. Fatigue 118 (2019) 249-261

Oplt T., Hutař P., Pokorný P., Náhlík L., Berto F.: Numerical evaluation of plasticity induced crack closure in 3D structures. Procedia Struct. Integr. 23 (2019) 101-106

Kunčická L., Král P., Dvořák J., Kocich R.: WE43 BIOCOMPATIBLE ALLOY AFTER SEVERE PLASTIC DEFORMATION: STRUCTURE CHARACTERIZATION. METAL 2019 Conf. Proc. 1 (2019) 1284-1290

Fintová S., Drábiková J., Hadzima B., Trško L., Březina M., Doležal P., Wasserbauer J.: Degradation of unconventional fluoride conversion coating on AZ61 magnesium alloy in SBF solution. Surf. Coat. Technol. 380 (2019) 125012

Vallejos S., Grácia I., Pizúrová N., Čechal J., Hubálek J., Cané C.: Gas sensitive ZnO structures with reduced humidity-interference. Sensors and Actuators B 301 (2019) 127054

Tinoco Navarro H., Cardona C., Vojtek T., Hutař P.: Finite Element Analysis of Crack-tip Opening Displacement and Plastic Zones Considering the Cyclic Material Behavior. Procedia Struct. Integr. 23 (2019) 529-534

Dobeš F., Dymáček P., Hasegawa M., Iwashita M.: High-temperature creep of a CoNiCrAlY bond coat alloy. Mater. Sci. Eng. A 759 (2019) 272-277

Slávik O., Hutař P., Gosch A., Berer M., Vojtek T., Arbeiter F., Pinter G., Náhlík L.: Fatigue Crack Propagation under Mixed Mode I and III in Polyoxymethelene Homopolymer. Key Eng. Mater. 827 (2019) 404-409

Vojtek T., Pokorný P., Kuběna I., Náhlík L., Fajkoš R., Hutař P.: Quantitative dependence of oxide-induced crack closure on air humidity for railway axle steel. Int. J. Fatigue 123 (2019) 213-224

Poczklán L., Mazánová V., Gamanov Š., Kruml T.: Fatigue crack growth rate in axial, torsional and multiaxial mode in 316L austenitic steel. Procedia Struct. Integr. 23 (2019) 269-274

Horník V., Fintová S., Šmíd M., Hutař P., Hrbáček K., Kunz L.: Fatigue properties of B1914 superalloy at high temperatures. Procedia Struct. Integr. 23 (2019) 191-196

Fintová S., Drábiková J., Pastorek F., Tkacz J., Kuběna I., Trško L., Hadzima B., Minda J., Doležal P., Wasserbauer J., Ptáček P.: Improvement of electrochemical corrosion characteristics of AZ61 magnesium alloy with unconventional fluoride conversion coatings. Surf. Coat. Technol. 357 (2019) 638-650

Tinoco Navarro H., Holzer J., Pikálek T., Buchta Z., Lazar J., Chlupová A., Kruml T., Hutař P.: Determination of elastic parameters of Si3N4 thin films by means of a numerical approach and bulge tests. Thin Solid Films 672 (2019) 66-74

Kunčická L., Král P., Dvořák J., Kocich R.: Texture Evolution in Biocompatible Mg-Y-Re Alloy After Friction Stir Processing. Metals 9(11) (2019) 1181


2018

Slávik O., Hutař P., Berer M., Gosch A., Arbeiter F., Pinter G., Náhlík L.: Numerical Modelling of Cylindrical Specimen under Mixed-Mode Loading Conditions. Key Eng. Mater. 774 (2018) 325-330

Sklenička V., Kuchařová K., Svobodová M., Král P., Kvapilová M., Dvořák J.: The effect of a prior short-term ageing on mechanical and creep properties of P92 steel. Mater. Character. 136 (2018) 388-397

Němcová A., Li Y., Kuběna I., Vickridge I., Ganem J., Yerokhin A., Habazaki H., Skeldon P.: Anodic film growth and silver enrichment during anodizing of an Mg- 0.6 at.% Ag alloy in fluoride-containing organic electrolytes. Electrochim. Acta 280 (2018) 300-307

Zapletal J., Trojanová Z., Doležal P., Fintová S., Knapek M.: Elastic and Plastic Behavior of the QE22 Magnesium Alloy Reinforced with Short Saffil Fibers and SiC Particles. Metals 8 (2018) 133

Dlhý P., Poduška J., Náhlík L., Berer M., Gosch A., Pinter G., Hutař P.: Compression-Loaded Cracked Cylinder - Stress Intensity Factor Evaluation. Key Eng. Mater. 774 (2018) 331-336

Mazánová V., Heczko M., Polák J.: Fatigue crack initiation and growth in 43Fe-25Ni-22.5Cr austenitic steel at a temperature of 700°C. Int. J. Fatigue 114 (2018) 11-21

Heczko M., Esser B., Smith T., Beran P., Mazánová V., McComb D., Kruml T., Polák J., Mills M.: Atomic resolution characterization of strengthening nanoparticles in a new high-temperature-capable 43Fe-25Ni-22.5Cr austenitic stainless steel. Mater. Sci. Eng. A 719 (2018) 49-60

Sklenička V., Kuchařová K., Svoboda M.: Creep behaviour and microstructure evolution of advanced creep-resistant 9%Cr martensitic steels under cyclic thermal loading. Kovové materiály 56 (2018) 1-13

Mazánová V., Polák J.: Initiation and growth of short fatigue cracks in austenitic Sanicro 25 steel. Fatigue Fract. Eng. Mater. Struct. 41 (2018) 1529-1545

Dymáček P., Jarý M., Dobeš F., Kloc L.: Tensile and Creep Testing of Sanicro 25 Using Miniature Specimens. Materials 11 (2018) 142

Peer P., Stěnička M., Filip P., Pizúrová N., Babayan V.: Magnetorheological characterization and electrospinnability of ultrasound-treated polymer solutions containing magnetic nanoparticles. Colloid and Polymer Science 296 (2018) 1849-1855

Trško L., Fintová S., Nový F., Bokůvka O., Jambor M., Pastorek F., Florková Z., Oravcová M.: Study of Relation between Shot Peening Parameters and Fatigue Fracture Surface Character of an AW 7075 Aluminium Alloy. Metals 8 (2018) 111

Poduška J., Hutař P., Frank A., Kučera J., Sadílek J., Pinter G., Náhlík L.: Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry. Eng. Fract. Mech. 203 (2018) 18-31


2017

Hutař P., Poduška J., Šmíd M., Kuběna I., Chlupová A., Náhlík L., Polák J., Kruml T.: Short fatigue crack behaviour under low cycle fatigue regime. Int. J. Fatigue 103 (2017) 207-215

Nezbedová E., Pinter G., Frank A., Hutař P., Poduška J., Hodan J.: Accelerated tests for lifetime prediction of PE-HD pipe grades. Macromol. Symp. 373 (2017) 1-8

Sklenička V., Kuchařová K., Kvapilová M., Svoboda M., Král P., Dvořák J.: Creep properties of simulated heat-affected zone of HR3C austenitic steel. Mater. Character. 128 (2017) 238-247

Järvenpää A., Jaskari M., Man J., Karjalainen L.: Stability of grain-refined reversed structures in a 301LN austenitic stainless steel under cyclic loading. Mater. Sci. Eng. A 703 (2017) 280-292

Moravčík I., Čížek J., Kováčová Z., Nejezchlebová J., Kitzmantel E., Neubauer E., Kuběna I., Horník V., Dlouhý I.: Mechanical and Microstructural Characterization of Powder Metallurgy CoCrNi Medium Entropy Alloy. Mater. Sci. Eng. A 701 (2017) 370-380