Ing. Pavla Roupcová, Ph.D.

---

Trunec M., Šťastný P., Kaštyl J., Roupcová P., Chlup Z.: 2Y-TZP ceramics with high strength and toughness by optimizing the microstructure. J. Eur. Ceram. Soc. 44 (2024) 3258-3266

---

Milyutin V., Bureš R., Faberová M., Birčáková Z., Shishkin D., Roupcová P., Hadraba H., Kollar P., Fuzer J., Phuong D.: Multi-component soft magnetic alloy FeNiCoAl0.4Mo0.1Si0.4B0.1 with high frequency stability of permeability. Mater. Sci. Eng. B 293 (2023) 116485

Polat O., Coskun F., Yildirim Y., Roupcová P., Sobola D., Sen C., Durmus Z., Caglar M., Turut .: Variation in the dielectric and magnetic characteristics of multiferroic LuFeO3 as a result of cobalt substitution at Fe sites. J. Alloys Comp. 963 (2023) 170939

Zobač O., Žižka R., Roupcová P., Kroupa A.: Experimental study of the Ni-Se-Sn phase diagram isothermal sections at 800 K, 1000 K and 1100 K. J. Phase Equil. Diffus. 44 (2023) 594-605

Švábenská E., Roupcová P., Schneeweiss O.: Spectroscopic methods in the analysis of wear particles. Chemical Papers 77 (2023) -

Král L., Chesalkin A., Čermák J., Roupcová P., Prusov E.: Influence of Fe on the hydrogen storage properties of LaCeNi alloys. Langmuir 39 (2023) 6061-6068

Pokorný T., Vykoukal V., Macháč P., Moravec Z., Scotti N., Roupcová P., Karásková K., Stýskalík A.: Ethanol dehydrogenation over copper-silica catalysts: from sub-nanometer clusters to 15 nm large particles. ACS Sustainable Chemistry & Engineering 11 (2023) 10980-10992

---

Čermák J., Král L., Roupcová P.: Hydrogen storage in TiVCrMo and TiZrNbHf multiprinciple-element alloys and their catalytic effect upon hydrogen storage in Mg. Renewable Energy 188 (2022) 411-424

Pizúrová N., Buršík J., Sojková T., Roupcová P., Schneeweiss O.: Magnetic properties and morphology of ultra-small iron oxide nanoparticles. J. Phys.: Conf. Series 2315 (2022) 012023

Čermák J., Král L., Roupcová P.: A new light-element multi-principal-elements alloy AlMg2TiZn and its potential for hydrogen storage. Renewable Energy 198 (2022) 1186-1192

Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Král L., Kvapilová M., Roupcová P., Horváth J.: Creep Resistance of S304H Austenitic Steel Processed by High-Pressure Sliding. Materials 15 (2022) 331

Švábenská E., Roupcová P.: Skryté nebezpečí otěrových částic. Chem. Listy 116 (2022) 228-234

Sokovnin S., Pizúrová N., Ilves V., Roupcová P., Zuev M., Uimin M., Ulitko M., Svetlova O.: Properties of ZrO2 and Ag-ZrO2 nanopowders prepared by pulsed electron beam evaporation. Ceram. Int. 48 (2022) 17703-17713

Gamanov Š., Holzer J., Roupcová P., Svoboda J.: High temperature oxidation kinetics of Fe 10Al 4Cr 4Y2O3 ODS alloy at 1200 1400 C. Corros. Sci. 206 (2022) 110498

Polat O., Coskun F., Roupcová P., Sobola D., Durmus Z., Caglar M., Šikola T., Turut .: The Os substitution into Fe sites in LuFeO3 multiferroic and its effects on the electrical and dielectric features. J. Alloys Comp. 911 (2022) 165035

Friák M., Masničák N., Schneeweiss O., Roupcová P., Michalcová A., Msallamová Š., Šob M.: Multi-methodological study of temperature trends in Mössbauer effect in Sn. Comp. Mater. Sci. 215 (2022) 111780

---

Šťastný P., Chlup Z., Roupcová P., Trunec M.: Thin high-strength zirconia tapes with extreme flexibility. J. Asian Ceram. Soc. 9 (2021) 964-974

Čermák J., Král L., Roupcová P.: Hydrogen desorption from alloys Mg-Cu(-KCl): Cu catalysis in detail. Int. J. Hydrogen Energy 46 (2021) 14494-14507

Sopoušek J., Drenčaková D., Brož P., Buršík J., Zemanová A., Roupcová P.: On thermal stability of nanocrystalline Ag-Cu-S powders. J Nanopart Res 23 (2021) 138

Polat O., Coskun F., Roupcová P., Sobola D., Durmus Z., Caglar M., Šikola T., Turut .: Influence of iridium (Ir) doping on the structural, electrical, and dielectric properties of LuFeO3 perovskite compound. J. Alloys Comp. 877 (2021) 160282

---

Stratil L., Horník V., Dymáček P., Roupcová P., Svoboda J.: The Influence of Aluminum Content on Oxidation Resistance of New-Generation ODS Alloy at 1200°C. Metals 10 (2020) 1478

Čermák J., Král L., Roupcová P.: Significantly decreased stability of MgH2 in the Mg-In-C alloy system: Long-period-stacking-ordering as a new way how to improve performance of hydrogen storage alloys?. Renewable Energy 150 (2020) 204-212

Mihálik M., Roupcová P., Tarasenko R., Hoser A., Mihálik M.: Magnetism in NdMn0.1Fe0.9O3 compound. J. Magn. Magn. Mater. 502 (2020) 166539

Jacko R., Mihálik M., Mihálik M., Zentková M., Roupcová P.: Crystal growth and characterisation of DyxLa1x2Ti2O7 crystals. Kovové materiály 58 (2020) 59-70

Koval V., Shi Y., Škorvánek I., Viola G., Bureš R., Saksl K., Roupcová P., Zhang M., Jia C., Yan H.: Cobalt-induced structural modulation in multiferroic Aurivillius-phase oxides. J. Mater. Chem. C 8 (2020) 8466-8483

Čermák J., Král L., Roupcová P.: Significant decrease of hydride decomposition enthalpy in ordered Mg-In alloys induced by growing hydrogen concentration. Kovové materiály 58 (2020) 161-167

Švábenská E., Pizúrová N., Roupcová P., Chlupová A., Brajer J., Foldyna J., Schneeweiss O.: Effect of shock wave on microstructure of silicon steel. Surfaces and Interfaces 20 (2020) 100415-100425

---

Vykoukal V., Buršík J., Roupcová P., Cullen D., Pinkas J.: Solvothermal hot injection synthesis of core-shell AgNi nanoparticles. J. Alloys Comp. 770 (2019) 377-385

Čermák J., Král L., Roupcová P.: Improved hydrogen sorption kinetics in Mg modified by chosen catalysts. Int. J. Hydrogen Energy 44 (2019) 8315-8324

Halasová M., Kuběna I., Roupcová P., Černý M., Strachota A., Chlup Z.: Iron precipitation in basalt fibres embedded in partially pyrolysed methylsiloxane matrix. Composites Part A 123 (2019) 286-292

---

Švábenská E., Roupcová P., Vondráček M., Lashin A., Schneeweiss O.: High temperature corrosion of Fe-6 wt% Si steel in various atmospheres. Mater. Corros. 69 (2018) 1-12

Chlup Z., Bača L., Hadraba H., Kuběna I., Roupcová P., Kováčová Z.: Low-temperature consolidation of high-strength TiB2 ceramic composites via grain-boundary engineering using Ni-W alloy. Mater. Sci. Eng. A 738 (2018) 194-202

Vasić M., Žák T., Pizúrová N., Roupcová P., Minić D., Minić D.: Thermally induced microstructural transformations and anti-corrosion properties of Co70Fe5Si10B15 amorphous alloy. J. Non-Crystall. Solids 500 (2018) 326-335

Mihálik M., Mihálik M., Zentková M., Uhlířová K., Kratochvílová M., Roupcová P.: Magneto-crystalline anisotropy of NdFe0.9Mn0.1O3 single crystal. Physica B 536 (2018) 89-82

Bertolla L., Chlup Z., Tatarko P., Hanzel O., Ševeček O., Roupcová P., Dlouhý I.: Preparation and characterization of novel environmentally friendly Al2O3/SiO2/CaO ceramic foams. Ceram. Int. 44 (2018) 19063-19069

---

Čermák J., Král L., Roupcová P.: Improvement of hydrogen storage kinetics in ball-milled magnesium doped with antimony. Int. J. Hydrogen Energy 42 (2017) 6144-6151

Bulin T., Švábenská E., Hapla M., Roupcová P., Ondrušek C., Schneeweiss O.: Magnetic properties of 42CrMo4 steel. Mater. Sci. Eng. A 179 (2017) 012010

Hadraba H., Chlup Z., Dlouhý A., Dobeš F., Roupcová P., Vilémová M., Matějíček J.: Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy. Mater. Sci. Eng. A 689 (2017) 252-256

---

Vasić M., Roupcová P., Pizúrová N., Stevanović S., Blagojević V., Žák T., Minić D.: Thermally Induced Structural Transformations of Fe40Ni40P14B6 Amorphous Alloy. Metall. Mater. Trans. A 47A (2016) 260-267

Dong Y., Svoboda P., Vrbka M., Košťál D., Urban D., Čížek J., Roupcová P., Dong H., Krupka I., Hartl M.: Towards near-permanent CoCrMo prosthesis surface by combining micro-texturing and low temperature plasma carburising. J. Mech. Behav. Biomed. Mater. 55 (2016) 215-227

Chlupová A., Heczko M., Obrtlík K., Polák J., Roupcová P., Beran P., Kruml T.: Mechanical properties of high niobium TiAl alloys doped with Mo and C. Mater. & Design 99 (2016) 284-292

Čermák J., Král L., Roupcová P.: Influence of long-term ageing upon the capacity of hydrogen storage in two novel Mg-Ni-In-C alloys. Kovové materiály 54 (2016) 389-396

Doležal P., Zapletal J., Fintová S., Trojanová Z., Greger M., Roupcová P., Podrábský T.: Influence of Processing Techniques on Microstructure and Mechanical Properties of a Biodegradable Mg-3Zn-2Ca Alloy. Materials 9 (2016) 1-15

---

Jirásková Y., Buršík J., Roupcová P., Jančík D., Čížek J.: Structural and compositional stability of the mechanically alloyed (Fe,Mo)-Al at elevated temperatures. Mater. Chem. Phys. 168 (2015) 108-116

Chlup Z., Bača L., Halasová M., Neubauer E., Hadraba H., Stelzer N., Roupcová P.: Effect of metallic dopants on the microstructure and mechanical properties of TiB2. J. Eur. Ceram. Soc. 35 (2015) 2745-2754

Luptáková N., Pizúrová N., Roupcová P., Dymáček P.: High Temperature Degradation of Powder-Processed Ni-based Superalloy. Materials Engineering - Materialove inzinierstvo 22 (2015) 85-94

Strečková M., Hadraba H., Bureš R., Faberová M., Roupcová P., Kuběna I., Medvecký L., Girman V., Kollar P., Fuzer J., Cizmar E.: Chemical synthesis of nickel ferrite spinel designed as an insulating bilayer coating on ferromagnetic particles. Surf. Coat. Technol. 270 (2015) 66-76

Sopoušek J., Zobač O., Buršík J., Roupcová P., Vykoukal V., Brož P., Pinkas J., Vřešťál J.: Heat-induced spinodal decomposition of Ag-Cu nanoparticles. Phys. Chem. Chem. Phys. 17 (2015) 28277-28285

Sopoušek J., Zobač O., Vykoukal V., Buršík J., Roupcová P., Brož P., Pinkas J., Vřešťál J.: Temperature stability of AgCu nanoparticles. J Nanopart Res 17 (2015) 478

---

Hadraba H., Strečková M., Husák R., Roupcová P.: Mechanical alloying of 80Ni-14.7Fe-4.4Mo-0.5Mn-0.3Si soft magnetic material of Permalloy type. Powder Metall. Progr. 14 (2014) 208-214

Zobač O., Sopoušek J., Buršík J., Zemanová A., Roupcová P.: Experimental study of the Sb-Sn-Zn alloy system. Metall. Mater. Trans. A 45 (2014) 1181-1188

---

Minić D., Minić D., Žák T., Roupcová P., David B.: Structural transformations of Fe81B13Si4C2 amorphous alloy induced by heating. J. Magn. Magn. Mater. 323 (2011) 400-404