Ing. Veronika Mazánová, Ph.D.

---

Slone C., Kaplowitz D., Bowers M., Roepke C., Mazánová V., James B., Aguiar D.: Effects of heat treatment on vintage pipeline electric resistance welds. Metall. Mater. Trans. A 56 (2025) 3670-3680

---

Slone C., Mazánová V., Kumar P., Cook D., Heczko M., Yu Q., Crossman B., George E., Mills M., Ritchie R.: Partially recrystallized microstructures expand the strength-toughness envelope of CrCoNi medium-entropy alloy. Communications Materials 5 (2024) 263

Mazánová V., Heczko M., Miao J., Mills M., Murphy-Leonard A.: The role of coherent nano precipitates on stacking fault and deformation twin formation during tensile deformation of wire arc additive manufactured nickel-aluminum-bronze. Mater. Sci. Eng. A 918 (2024) 147426

---

---

Que Z., Seifert H., Mazánová V., Spätig P.: Hydrogen embrittlement on fracture resistance of low-alloy reactor pressure vessel steel with high dynamic strain aging at 288 °C. Mater. Lett. 308 (2022) 131269



Mazánová V., Heczko M., Polák J.: On the mechanism of fatigue crack initiation in high-angle grain boundaries. Int. J. Fatigue 158 (2022) 106721

---

Trávníček L., Kuběna I., Mazánová V., Vojtek T., Polák J., Hutař P., Šmíd M.: Advantageous Description of Short Fatigue Crack Growth Rates in Austenitic Stainless Steels with Distinct Properties. Metals 11 (2021) 475

Heczko M., Mazánová V., Gröger R., Záležák T., Hooshmand M., George E., Mills M., Dlouhý A.: Elemental segregation to lattice defects in the CrMnFeCoNi high-entropy alloy during high temperature exposures. Acta Mater. 208 (2021) 116719

Vinogradov A., Kruml T., Heczko M., Mazánová V., Linderov M.: Kinetics of cyclically-induced mechanical twinning in gamma-TiAl unveiled by a combination of acoustic emission, neutron diffraction and electron microscopy. Acta Mater. 212 (2021) 116921

Heczko M., George E., Mazánová V., Ghazisaeidi M., Slone C., Polák J., Shih M., Mills M.: Role of deformation twinning in fatigue of CrCoNi medium-entropy alloy at room temperature. Scr. Mater. 202 (2021) 113985

---

Chlupová A., Poczklán L., Man J., Mazánová V., Heczko M., Kruml T.: Character of Fatigue Damage under Axial, Torsional and Biaxial Loading of 316L Stainless Steel. Defect Diffus. Forum 405 (2020) 264-270

Mazánová V., Heczko M., Slone C., Kuběna I., Tobiáš J., George E., Kruml T., Polák J., Mills M.: SEM & STEM Multi-scale Characterization of Fatigue Damage in CrCoNi Medium-entropy Alloy with Fully Recrystallized Microstructure. Microscopy and Microanalysis 26 (Supp (2020) 2224

---

Heczko M., Esser B., Gröger R., Feng L., Mazánová V., Wang Y., Mills M.: Structure, Morphology and Coarsening Behavior of MX (NbC) Nanoprecipitates in Fe-Ni-Cr Based Alloys. Microscopy and Microanalysis 25 (2019) 2612-2613

Poczklán L., Mazánová V., Gamanov Š., Kruml T.: Fatigue crack growth rate in axial, torsional and multiaxial mode in 316L austenitic steel. Procedia Struct. Integr. 23 (2019) 269-274

Mazánová V., Heczko M., Škorík V., Chlupová A., Polák J., Kruml T.: Microstructure and martensitic transformation in 316L austenitic steel during multiaxial low cycle fatigue at room temperature. Mater. Sci. Eng. A 767 (2019) 138407

---

Heczko M., Esser B., Smith T., Beran P., Mazánová V., McComb D., Kruml T., Polák J., Mills M.: Atomic resolution characterization of strengthening nanoparticles in a new high-temperature-capable 43Fe-25Ni-22.5Cr austenitic stainless steel. Mater. Sci. Eng. A 719 (2018) 49-60

Polák J., Mazánová V., Petráš R., Heczko M.: Early damage and fatigue crack initiation at ambient and elevated temperatures in heat resistant austenitic steel. MATEC Web Conf. 165 (2018) 04008

Mazánová V., Polák J.: Initiation and growth of short fatigue cracks in austenitic Sanicro 25 steel. Fatigue Fract. Eng. Mater. Struct. 41 (2018) 1529-1545

Mazánová V., Heczko M., Polák J.: Fatigue crack initiation and growth in 43Fe-25Ni-22.5Cr austenitic steel at a temperature of 700°C. Int. J. Fatigue 114 (2018) 11-21

---

Polák J., Mazánová V., Heczko M., Petráš R., Kuběna I., Casalena L., Man J.: The role of extrusions and intrusions in fatigue crack initiation. Eng. Fract. Mech. 185 (2017) 46-60

Mazánová V., Polák J., Škorík V., Kruml T.: Multiaxial elastoplastic cyclic loading of austenitic 316L steel. Frattura ed Integrita Strutturale 11 (2017) 162-169

Mazánová V., Heczko M., Kuběna I., Polák J.: Surface Relief Formation in Relation to the Underlying Dislocation Arrangement. Solid State Phenom. 258 (2017) 526-529

Heczko M., Esser B., Smith T., Beran P., Mazánová V., Kruml T., Polák J., Mills M.: On the origin of extraordinary cyclic strengthening of the austenitic stainless steel Sanicro 25 during fatigue at 700 C. J. Mater. Res. 32 (2017) 4342-4353

Mazánová V., Škorík V., Kruml T., Polák J.: Cyclic response and early damage evolution in multiaxial cyclic loading of 316L austenitic steel. Int. J. Fatigue 100 (2017) 466-476

Karol M., Chlupová A., Mazánová V., Kruml T.: Fatigue crack initiation and growth in 316L steel in torsional cyclic loading. Eng. Mech. 23 (2017) 434-437

Polák J., Mazánová V., Heczko M., Kuběna I., Man J.: Profiles of persistent slip markings and internal structure of underlying persistent slip bands. Fatigue Fract. Eng. Mater. Struct. 40 (2017) 1101-1116

---

Polák J., Mazánová V., Kuběna I., Heczko M., Man J.: Surface Relief and Internal Structure in Fatigued Stainless Sanicro 25 Steel. Metall. Mater. Trans. A 47A (2016) 1907-1911

---

Polák J., Petráš R., Mazánová V.: Basic mechanisms leading to fatigue failure of structural materials. Trans. Indian Inst. Metals 1 (2015) 1-6