Institute of Physics of Materials AS CR, v. v. i. > Groups > Multiscale Modelling and Measurements of Physical Properties

Multiscale Modelling and Measurements of Physical Properties

Headdoc. Ing. Roman Gröger, Ph.D.
E-mail [javascript protected email address]
Phone number+420 532 290 448
Room307
DepartmentCEITEC IPM



Research areas
Experimental studies of relationships between microstructure and physical properties of materials. Quantum-mechanical studies of electronic, magnetic and optical properties of ordered and disordered media. Atomistic studies of stress relaxations in heteroepitaxial films, on surfaces and at interfaces. Mesoscopic models of self-organization and pattern formation in correlated microstructural domains. Thermodynamic models for entropically stabilized ordered high-temperature alloys. Linking atomistic studies of incipient plasticity with direct experimental measurements. Calculations of minimum energy pathways and sampling of the density of states of large systems. Computational studies of dislocation loops in irradiated materials. Self-organized criticality and scale invariance in systems with long range interactions. Electron microscopy of extended defects and its coupling with image simulations of HREM contrast. Computational fracture mechanics and fatigue of metals and polymers. Experimental measurements of physical properties of metals and polymer-metal composites.




Main objectives
Elucidate the mechanism of strain relief in large-misfit heterostructures with focus on semiconductors used in advanced optoelectronics. Develop multiscale models of plasticity that are based on atomic-level studies of isolated dislocations. Develop theoretical models that describe the thermodynamics of plastic flow and phase stability of CoCrFeMnNi alloys. Construct simplified atomistic models of bonding in FCC equiatomic ternary, quaternary and quinary alloys. Describe the local reorientations of magnetic moments and changes in the distributions of charges in multiferroic materials using mesoscopic field-theoretical methods. Couple atomistic modeling with simulations of image contrast and direct HREM experiments to develop numerical aberration correctors for studies of lattice defects. Utilize finite element models to characterize the strength of bonding in polymer-metal composites. Investigate and optimize the magnetic and electrical properties of nanostructures for use in nanoelectronics, nanophotonics and biosensing, their correlation with geometrical/structural parameters of nanostructures and operational parameters. Develop routes to stabilize exotic structures by systematic strain engineering.

Researchers


NamePhone numbersRoomsE-mail
prof. RNDr. Antonín Dlouhý, CSc. +420 532 290 412 205 dlouhy@ipm.cz
Mgr. Jan Fikar, Ph.D. +420 532 290 429 421 fikar@ipm.cz
doc. Ing. Pavel Hutař, Ph.D. +420 532 290 351 119 hutar@ipm.cz
Ing. Yvonna Jirásková, Ph.D. +420 532 290 446 305 jirasko@ipm.cz
Ing. Tomáš Káňa, Ph.D. +420 532 290 423 320 kana@ipm.cz
doc. Ing. Luboš Náhlík, Ph.D. +420 532 290 358 106 nahlik@ipm.cz
Mgr. Andrej Ostapovec, Ph.D. +420 532 290 429 421 ostapov@ipm.cz
Ing. Jan Poduška, Ph.D. +420 532 290 347 114 poduska@ipm.cz
Ing. Pavel Pokorný, Ph.D. +420 532 290 362 108 pokorny@ipm.cz
Ing. Oldřich Schneeweiss, DrSc. +420 532 290 434 315 schneew@ipm.cz
Ing. Tomáš Vojtek, Ph.D. +420 532 290 362 108 vojtek@ipm.cz
Mgr. Tomáš Záležák, Ph.D. +420 532 290 372 258 zalezak@ipm.cz
RNDr. Tomáš Žák, CSc. +420 532 290 382 223 zak@ipm.cz

Technicians


NamePhone numbersRoomsE-mail
RNDr. Miroslav Hapla +420 532 290 462 426 hapla@ipm.cz

Phd students


NamePhone numbersRoomsE-mail
Ing. Zdeněk Antoš +420 532 290 451 308 antos@ipm.cz
Ing. Pavol Dlhý +420 532 290 347 114 dlhy@ipm.cz
Ing. Štěpán Gamanov +420 532 290 371 219 gamanov@ipm.cz
Ing. Jakub Holzer +420 532 290 451 308 holzer@ipm.cz
Ing. Jakub Pongrácz +420 532 290 451 308 pongracz@ipm.cz
Ing. Ondrej Slávik +420 532 290 347 114 slavik@ipm.cz
Mgr. Tereza Sojková +420 532 290 451 308 sojkova@ipm.cz
MSc. Hector Andres Tinoco Navarro +420 532 290 338 108a tinoco@ipm.cz
Ing. Lukáš Trávníček +420 532 290 347 114 travnicek@ipm.cz
Ing. Petr Vacek +420 532 290 451 308 vacek@ipm.cz
M.Tech. Ritu Verma +420 532 290 461 427 verma@ipm.cz

Project numberNameInvestigator
CZ.01.1.02/0.0/0.0/19_262/0020138 Research and development of casting technology of thermally affected parts of aircraft engines and highly precise casts of new generation of turbochargers doc. Ing. Pavel Hutař, Ph.D.
FV40327 Automatic optical system for fatigue crack propagation measurement doc. Ing. Pavel Hutař, Ph.D.
TN01000071 National Competence Centre of Mechatronics and Smart Technologies for Mechanical Engineering doc. Ing. Pavel Hutař, Ph.D.
TN01000015 National Centre of Competence ENGINEERING doc. Ing. Luboš Náhlík, Ph.D.
8J19UA037 Non-Schmid behavior of dislocations in magnesium and its alloys Mgr. Andrej Ostapovec, Ph.D.
19-23411S Interplay of plasticity and magnetism in alpha-iron and chromium doc. Ing. Roman Gröger, Ph.D.
CZ.02.1.01/0.0/17_048/0007399 New Composite Materials for Environmental Applications (NKMEA) Ing. Yvonna Jirásková, Ph.D.
RFCS-02-2016 ID:747266 Innovative approach to improve fatigue performance of automotive components aiming at CO2 emissions reduction (INNOFAT) doc. Ing. Pavel Hutař, Ph.D.
PCCL-K1 K1-Center in Polymer Engineering and Science doc. Ing. Pavel Hutař, Ph.D.
LQ1601 CEITEC 2020 doc. Ing. Luboš Náhlík, Ph.D.

ALL PROJECTS

Project numberNameInvestigator
763685 BACK FOR THE FUTURE (CZ) doc. Ing. Roman Gröger, Ph.D.
CZ.01.1.02/0.0/0.0/15_019/0004399 Research and development of precision casting technology for new type of aircraft engine castings and axial turbocharger wheels doc. Ing. Pavel Hutař, Ph.D.
CZ.01.1.02/0.0/0.0/15_019/0002421 Research and development of advanced precision casting technology of strongly thermally affected parts of new turbochargers from nickel based superalloys doc. Ing. Pavel Hutař, Ph.D.
CZ.1.07/2.3.00/20.0214 Human Resources Developments in the research of physical and material properties of emerging, newly developed and applied engineering materials doc. Ing. Luboš Náhlík, Ph.D.
7AMB12SK009 Microstructure of Fe-Al based alloys Ing. Yvonna Jirásková, Ph.D.
CZ.1.07/2.4.00/17.0006 Building up Cooperation in R&D with the Research and Industrial Partners doc. Ing. Luboš Náhlík, Ph.D.
CZ.1.05/1.1.00/02.0068 CEITEC – Central European Institute of Technology doc. Ing. Luboš Náhlík, Ph.D.
P108/11/1350 Effects of cores and boundaries of nanograins on the structural and physical properties of ball milled and mechanically alloyed iron-based materials Ing. Yvonna Jirásková, Ph.D.
P204/10/0255 Calculation of the Peierls barrier in bcc metals and its dependence on stress doc. Ing. Roman Gröger, Ph.D.
Marie-Curie International Reintegration Grant (IRG), No. 247705 “MesoPhysDef” Mesoscopic framework for modeling physical processes in multiphase materials with defects doc. Ing. Roman Gröger, Ph.D.

ALL PROJECTS

Transmission electron microscope JEOL JEM-2100F

Contact person: RNDr. Jiří Buršík, CSc., DSc.
High resolution transmission electron microscope JEOL JEM-2100F with FEG electron source.


2021

Švábenská E., Chlupová A., Foldyna J., Schneeweiss O.: Evolution of Microstructure of Silicon Steel After Pulsating Water Jet Treatment. Lecture Notes in Mechanical Engineering Advances (2021) 219-228



2020

Vojtek T., Pokorný P., Oplt T., Jambor M., Náhlík L., Herrero D., Hutař P.: Classically determined effective ?K fails to quantify crack growth rates. Theor. Appl. Fract. Mech. 108 (2020) 102608

Seitl S., Pokorný P., Miarka P., Klusák J., Kala Z., Kunz L.: Comparison of fatigue crack propagation behaviour in two steel grades S235, S355 and a steel from old crane way. MATEC Web Conf. 310 (2020) 34

Jirásková Y., Buršík J., Ederer J., Janoš P., Jurica J., Luňáček J., Životský O.: Effect of magnetite transformations on degradation efficiency of cerium dioxide-magnetite composite. Journal of Materials Research and Technology 9 (2020) 4431-4439

Dymáček P., Dobeš F., Jarý M., Jirásková Y., Pizúrová N., Friák M.: Small punch testing of Fe-Al based alloys with Ti and Nb additions. IOP Conf. Ser.: Mater. Sci. Eng. 723 (2020) 012006

Borges M., Antunes F., Prates P., Branco R., Vojtek T.: Effect of Young?s modulus on Fatigue Crack Growth. Int. J. Fatigue 132 (2020) 105375

Švábenská E., Pizúrová N., Roupcová P., Chlupová A., Brajer J., Foldyna J., Schneeweiss O.: Effect of shock wave on microstructure of silicon steel. Surfaces and Interfaces 20 (2020) 100415-100425

Pokorný P., Dlhý P., Poduška J., Fajkoš R., Vojtek T., Náhlík L., Grasso M., Hutař P.: Influence of heat treatment-induced residual stress on residual fatigue life of railway axles. Theor. Appl. Fract. Mech. 109 (2020) 102732

Schneider M., George E., Manescau T., Záležák T., Hunfeld J., Dlouhý A., Eggeler G., Laplanche G.: Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy. Int. J. Plast. 124 (2020) 155-169

Fikar J., Schäublin R.: Stability of small vacancy clusters in tungsten by molecular dynamics. Nucl. Instr. Meth. Phys. Res. B 464 (2020) 56-59

Vykoukal V., Zelenka F., Buršík J., Káňa T., Kroupa A., Pinkas J.: Thermal properties of Ag@Ni core-shell nanoparticles. CALPHAD 69 (2020) 101741

Gosch A., Berer M., Hutař P., Slávik O., Vojtek T., Arbeiter F., Pinter G.: Mixed Mode I/III fatigue fracture characterization of Polyoxymethylene. Int. J. Fatigue 130 (2020) 105269

Fintová S., Kuběna I., Palán J., Mertová K., Duchek M., Hutař P., Pastorek F., Kunz L.: Influence of sandblasting and acid etching on fatigue properties of ultra-fine grained Ti grade 4 for dental implants. J. Mech. Behav. Biomed. Mater. 111 (2020) 104016

Rogl G., Ghosh S., Wang L., Buršík J., Grytsiv A., Kerber M., Bauer E., Mallik R., Chen X., Zehetbauer M., Rogl P.: Half-Heusler alloys: Enhancement of ZT after severe plastic deformation (ultra-low thermal conductivity). Acta Mater. 183 (2020) 285-300

Nikodym M., Luňáček J., Jirásková Y., Janoš P., Jurica J., Životský O.: Fe-Oxide/CeO2 Composites ? Magnetization Curves and Their Analyses Using the Jiles?Atherton Model. Acta Phys. Pol. A 137 (2020) 601-603

Rogl G., Soprunyuk V., Schranz W., Zehetbauer M., Buršík J., Müller H., Bauer E., Rogl P.: Resistivity and Thermal Expansion (4.2-820 K) of Skutterudites after Severe Plastic Deformation via HPT. Z. Anorg. Allg. Chem. 646 (2020) 1267-1272

Šťastný P., Vacek P., Trunec M.: Characterization of microstructure and phase distribution of sintered multiphasic calcium phosphate bioceramics. Ceram. Int. 46 (2020) 5500-5504

Jirásková Y., Pizúrová N., Friák M., Janičkovič D.: Structural and Magnetic Study of Fe?Al20?(Ti, Nb) Alloys. Acta Phys. Pol. A 137 (2020) 835-838

Chlupová A., Heczko M., Obrtlík K., Dlouhý A., Kruml T.: Effect of heat-treatment on the microstructure and fatigue properties of lamellar gama-TiAl alloyed with Nb, Mo and/or C. Mater. Sci. Eng. A 786 (2020) 139427

Gröger R., Vítek V., Dlouhý A.: Effective pair potential for random fcc CoCrFeMnNi alloys. Model. Simul. Mater. Sci. Eng. 28 (2020) 075006

Fintová S., Pokorný P., Fajkoš R., Hutař P.: EA4T railway axle steel fatigue behavior under very high-frequency fatigue loading. Eng. Fail. Anal. 115 (2020) 104668

Gröger R., Vítek V.: Single crystal yield criterion for chromium based on atomistic studies of isolated 1/2[111] screw dislocations. Int. J. Plast. 132 (2020) 102733

Antoš Z., Vacek P., Gröger R.: Intersections of two stacking faults in zincblende GaN. Comp. Mater. Sci. 180 (2020) 109620

Procházka I., Vlasák T., Čížek J., Lukáč F., Liedke M., Anwand W., Jirásková Y., Janickovic D.: Quenched-in Vacancies and Hardening of Fe-Al Intermetallics. Acta Phys. Pol. A 137 (2020) 255-259

Hrabovská K., Životský O., Rojicek J., Fusek M., Mares V., Jirásková Y.: Surface Magnetostriction of FeCoB Amorphous Ribbons Analyzed Using Magneto-Optical Kerr Microscopy. Materials 13 (2020) 1-15




2019

Žák S., Horníková J., Šandera P., Vojtek T., Kianicová M., Pokluda J.: Local and equivalent stress intensity factors for tortuous cracks under remote mode II loading. Theor. Appl. Fract. Mech. 101 (2019) 35-45

Que Z., Seifert H., Spätig P., Zhang A., Holzer J., Rao G., Ritter S.: Effect of dynamic strain ageing on environmental degradation of fracture resistance of low-alloy RPV steels in high-temperature water environments. Corros. Sci. 152 (2019) 172-189

Zelenka F., Brož P., Vřešťál J., Buršík J., Rogl G., Grytsiv A., Rogl P.: Study of thermal stability of p-type skutterudites DD0.7Fe3CoSb12 by Knudsen effusion mass spectrometry. RSC Advances 9 (2019) 21451-21459

Lee L., Frentrup M., Vacek P., Massabuau F., Kappers M., Wallis D., Oliver R.: Investigation of MOVPE-grown zincblende GaN nucleation layers on 3CSiC/ Si substrates. J. Cryst. Growth 524 (2019) 125167

Oplt T., Hutař P., Pokorný P., Náhlík L., Berto F.: Numerical evaluation of plasticity induced crack closure in 3D structures. Procedia Struct. Integr. 23 (2019) 101-106

Gröger R., Chlup Z., Kuběnová T., Kuběna I.: Interplay of slip and twinning in niobium single crystals compressed at 77 K. J. Mater. Res. 34 (2019) 261-270

Horst O., Ruttert B., Bürger D., Heep L., Wang H., Dlouhý A., Theisen W., Eggeler G.: On the rejuvenation of crept Ni-Base single crystal superalloys (SX) by hot isostatic pressing (HIP). Mater. Sci. Eng. A 758 (2019) 202-214

Kuběna M., Eliáš M., Zajíčková L., Poduška J., Kruml T.: On the Tensile Tests of Polyurethane and Its Composites with Carbon Nanotubes. Adv. Mater. Sci. Eng. 2019 (2019) 6598452

Kroupa A., Vykoukal V., Káňa T., Zemanová A., Pinkas J., Šob M.: The theoretical and experimental study of the Sb-Sn nano-alloys. CALPHAD 64 (2019) 90-96

Que Z., Seifert H., Spätig P., Holzer J., Zhang A., Rao G., Ritter S.: Environmental degradation of fracture resistance in high-temperature water environments of low-alloy reactor pressure vessel steels with high sulphur or phosphorus contents. Corros. Sci. 154 (2019) 191-207

Frank A., Arbeiter F., Berger I., Hutař P., Náhlík L., Pinter G.: Fracture Mechanics Lifetime Prediction of Polyethylene Pipes. J. Pipeline Syst. Eng. Pract., 10 (2019) 04018030

Jirásková Y., Buršík J., Janičkovič D., Životský O.: Influence of Preparation Technology on Microstructural and Magnetic Properties of Fe2MnSi and Fe2MnAl Heusler Alloys. Materials 12 (2019) 1-14

Heczko M., Esser B., Gröger R., Feng L., Mazánová V., Wang Y., Mills M.: Structure, Morphology and Coarsening Behavior of MX (NbC) Nanoprecipitates in Fe-Ni-Cr Based Alloys. Microscopy and Microanalysis 25 (2019) 2612-2613

Friák M., Buršíková V., Pizúrová N., Pavlů J., Jirásková Y., Homola V., Miháliková I., Slávik A., Holec D., Všianská M., Koutná N., Fikar J., Janičkovič D., Šob M., Neugebauer J.: Elasticity of Phases in Fe-Al-Ti Superalloys: Impact of Atomic Order and Anti-Phase Boundaries. Crystals 9 (2019) 299

Horník V., Fintová S., Šmíd M., Hutař P., Hrbáček K., Kunz L.: Fatigue properties of B1914 superalloy at high temperatures. Procedia Struct. Integr. 23 (2019) 191-196

Rao Z., Ponge D., Koermann F., Ikeda Y., Schneeweiss O., Friák M., Neugebauer J., Raabe D., Li Z.: Invar effects in FeNiCo medium entropy alloys: From an Invar treasure map to alloy design. Intermetallics 111 (2019) 106520

Lee L., Frentrup M., Vacek P., Kappers M., Wallis D., Oliver R.: Investigation of stacking faults in MOVPE-grown zincblende GaN by XRD and TEM. J. Appl. Phys. 125 (2019) 105303

Vallejos S., Grácia I., Pizúrová N., Čechal J., Hubálek J., Cané C.: Gas sensitive ZnO structures with reduced humidity-interference. Sensors and Actuators B 301 (2019) 127054

Tinoco Navarro H., Cardona C., Vojtek T., Hutař P.: Finite Element Analysis of Crack-tip Opening Displacement and Plastic Zones Considering the Cyclic Material Behavior. Procedia Struct. Integr. 23 (2019) 529-534

Brož P., Hejduková M., Vykoukal V., Zelenka F., Sopoušek J., Buršík J., Zobač O.: Study of surface effects and catalytic properties of selected Ni-based bimetallic nanoparticles by Knudsen effusion mass spectrometry. CALPHAD 64 (2019) 334-341

Weiser A., Buršíková V., Jarý M., Dymáček P., Dugáček J., Frenzel J., Čermák J., Dlouhý A.: Strength of hydrogen-free and hydrogen-doped Ni50Ti50 shape memory platelets . Scr. Mater. 162 (2019) 151-155

Schneider M., George E., Manescau T., Záležák T., Hunfeld J., Dlouhý A., Eggeler G., Laplanche G.: Benchmark dataset of the effect of grain size on strength in the single-phase FCC CrCoNi medium entropy alloy. Data in Brief 27 (2019) 104592

Horník V., Fintová S., Šmíd M., Hutař P., Hrbáček K., Kunz L.: Interaction of fatigue and creep in MAR-M 247 superalloy. Procedia Struct. Integr. 23 (2019) 197-202

Dymáček P., Dobeš F., Jirásková Y., Pizúrová N., Friák M.: Tensile, creep and fracture testing of prospective Fe-Al-based alloys using miniature specimens. Theor. Appl. Fract. Mech. 99 (2019) 18-26

Kamarad J., Friák M., Kastil J., Schneeweiss O., Šob M., Dlouhý A.: Effect of high pressure on magnetic properties of CrMnFeCoNi high entropy alloy. J. Magn. Magn. Mater. 487 (2019) 165333

Brož P., Zelenka F., Sopoušek J., Hejduková M., Kuběnová T., Zobač O.: Thermal analysis and Knudsen effusion mass spectrometry combined in a specially-adapted commercial skimmer coupled instrument (Netzsch). CALPHAD 65 (2019) 86-92

Životský O., Buršík J., Janičkovič D., Titov A., Jirásková Y.: Low-temperature magnetic transitions in Fe2MnSi Heusler alloys prepared in bulk and ribbon form. J. Magn. Magn. Mater. 475 (2019) 5-9

Vojtek T., Pokorný P., Kuběna I., Náhlík L., Fajkoš R., Hutař P.: Quantitative dependence of oxide-induced crack closure on air humidity for railway axle steel. Int. J. Fatigue 123 (2019) 213-224

Elhadidy H., Mahi F., Franc J., Schneeweiss O.: Calculations of High-Frequency Noise Spectral Density of Different CdTe Metal-Semiconductor-Metal Schottky Contacts. J. Electronic Mater. 11 (2019) 1-7

Vojtek T., Pokorný P., Náhlík L., Herrero D., Hutař P.: Crack Closure in the Near-threshold Region in Metallic Materials. Procedia Struct. Integr. 23 (2019) 481-486

Jirásková Y., Buršík J., Janoš P., Luňáček J., Chrobak A., Životský O.: Effect of Iron Impurities on Magnetic Properties of Nanosized CeO2 and Ce-Based Compounds. Metals 9 (2019) 222

Brož P., Zelenka F., Kohoutek Z., Vřešťál J., Vykoukal V., Buršík J., Zemanová A., Rogl G., Rogl P.: Study of thermal stability of CoSb3 skutterudite by Knudsen effusion mass spectrometry. CALPHAD 65 (2019) 1-7

Luptáková N., Dymáček P., Jarý M., Záležák T.: Failure analysis of a gripping assembly loaded at temperatures above 1000 °C. Eng. Fail. Anal. 96 (2019) 384-393

Káňa T., Zouhar M., Černý M., Šob M.: Ab initio study of the theoretical strength and magnetism of the Fe-Pd, Fe-Pt and Fe-Cu nanocomposites. J. Magn. Magn. Mater. 469 (2019) 100-107

Elhadidy H.: Electromigration and Polarization in Schottky Contacts CdTe Based Compounds. Arab Journal of Nuclear Sciences and Applications 52 (2019) 13-18

Elhadidy H., Hassan A.: Effect of Zr+4 doping on characteristics and sonocatalytic activity of TiO2/carbon nanotubes composite catalyst for degradation of chlorpyrifos. J. Phys. Chem. Solids 129 (2019) 180-187

Seitl S., Miarka P., Pokorný P., Klusák J.: Influence of corrosion on fatigue behaviour of old crane runway steel. The Journal of Strain Analysis for Engineering Design 54 (2019) 416-423

Gröger R., Vítek V.: Impact of non-Schmid stress components present in the yield criterion for bcc metals on the activity of {110}<111> slip systems. Comp. Mater. Sci. 159 (2019) 297-305

Oplt T., Šebík M., Berto F., Náhlík L., Pokorný P., Hutař P.: Strategy of plasticity induced crack closure numerical evaluation. Theor. Appl. Fract. Mech. 102 (2019) 59-69

Vacek P., Kostelník P., Gröger R.: Correlation of Structure and EBIC Contrast from Threading Dislocations in AlN/Si Films. Phys. Stat. Sol. B 256 (2019) 1900279

Slávik O., Hutař P., Gosch A., Berer M., Vojtek T., Arbeiter F., Pinter G., Náhlík L.: Fatigue Crack Propagation under Mixed Mode I and III in Polyoxymethelene Homopolymer. Key Eng. Mater. 827 (2019) 404-409

Ostapovec A., Gornakova A.: On faceting of {10 -11} and {10-12} twin boundaries in hcp metals. Mater. Lett. 247 (2019) 99-101

Zábranský L., Souček P., Vašina P., Dugáček J., Sťahel P., Buršík J., Svoboda M., Mikšová R., Peřina V., Balázsi K., Cigány Z., Buršíková V.: Microstructural changes of amorphous Mo?B?C coatings upon thermal annealing. Surf. Coat. Technol. 379 (2019) 125052

Tinoco Navarro H., Holzer J., Pikálek T., Buchta Z., Lazar J., Chlupová A., Kruml T., Hutař P.: Determination of elastic parameters of Si3N4 thin films by means of a numerical approach and bulge tests. Thin Solid Films 672 (2019) 66-74

Seitl S., Miarka P., Pokorný P., Fintová S., Kunz L.: COMPARISON OF MECHANICAL PROPERTIES OF OLD STEEL FROM TRUSS CRANE RUNWAY WITH S235 AND S355 GRADES. Trans. VSB TU Ostrava Ser. 19 (2019) 56-60

Vykoukal V., Halasta V., Babiak M., Buršík J., Pinkas J.: Morphology Control in AgCu Nanoalloy Synthesis by Molecular Cu(I) Precursors. Inorganic Chemistry 58 (2019) 15246-15254

Poduška J., Hutař P., Frank A., Kučera J., Sadílek J., Pinter G., Náhlík L.: Soil Load on Plastic Pipe and its Influence on Lifetime. Strojnicky casopis - Journal of Mechanical Engineering 69 (2019) 101-106

Bazhukova I., Sokovnin S., Ilves V., Myshkina A., Vazirov R., Pizúrová N., Kasyanova V.: Luminescence and optical properties of cerium oxide nanoparticles. Optical Materials 92 (2019) 136-142

Mrázek J., Vytykáčová S., Buršík J., Puchý V., Girman V., Peterka P., Kašík I.: Sol-gel route to nanocrystalline Eu2Ti2O7 films with tailored structural and optical properties. J. Amer. Ceram. Soc. 102 (2019) 6713-6723

Vykoukal V., Buršík J., Roupcová P., Cullen D., Pinkas J.: Solvothermal hot injection synthesis of core-shell AgNi nanoparticles. J. Alloys Comp. 770 (2019) 377-385

Oplt T., Hutař P., Pokorný P., Náhlík L., Chlup Z., Berto F.: Effect of the free surface on the fatigue crack front curvature at high stress asymmetry. Int. J. Fatigue 118 (2019) 249-261

Akram S., Babutskyi A., Chrysanthou A., Montalvao D., Pizúrová N.: Effect of Alternating Magnetic Field on the Fatigue Behaviour of EN8 Steel and 2014-T6 Aluminium Alloy. Metals 9 (2019) 984

Vojtek T., Hrstka M.: How to get a correct estimate of the plastic zone size for shear- mode fatigue cracks?. Theor. Appl. Fract. Mech. 104 (2019) 102322

Buršík J., Buršíková V., Rogl G., Rogl P.: Local mechanical properties of advanced skutterudites processed by various routes. IOP Conf. Ser.: Mater. Sci. Eng. 613 (2019) 012036

Pinkas J., Sopoušek J., Brož P., Vykoukal V., Buršík J., Vřešťál J.: Synthesis, structure, stability and phase diagrams of selected bimetallic silver- and nickel-based nanoparticles. CALPHAD 64 (2019) 139-148

Ostapovec A., Serra A., Pond R.: Non-diffusional growth mechanism of I1 basal stacking-faults inside twins in hcp metals. Scr. Mater. 172 (2019) 149-153

Hlaváček A., Mickert M., Soukka T., Lahtinen S., Tallgren T., Pizúrová N., Król A., Gorris H.: Large-Scale Purification of Photon-Upconversion Nanoparticles by Gel Electrophoresis for Analogue and Digital Bioassays. Anal. Chem. 91 (2019) 1241-1246



2018

Dlhý P., Poduška J., Náhlík L., Berer M., Gosch A., Pinter G., Hutař P.: Compression-Loaded Cracked Cylinder - Stress Intensity Factor Evaluation. Key Eng. Mater. 774 (2018) 331-336

Paidar V., Ostapovec A., Káňa T.: Dislocation Content of Non-Classical Twin Boundaries in Hexagonal Metals . Acta Phys. Pol. A 134 (2018) 692-694

Válková L., Ševčíková J., Pávková Goldbergová M., Weiser A., Dlouhý A.: Osteoarthritic process modifies expression response to NiTi alloy presence. J. Mater. Sci. Mater. M. 29 (2018) 146

Rogl P., Romaka V., Buršík J., Michor H., Reissner M., Giester G., Homolová V.: Structure and properties of a novel boride (V0.92Fe0.08)2FeB2 with partially ordered U3Si2-type. J. Alloys Comp. 746 (2018) 638-647

Kushnir K., Ostapovec A.: Variability of Twin Boundary Structure in Computer Simulations of Tensile Twins in Magnesium. Defect Diffus. Forum 385 (2018) 241-244

Elhadidy H., Franc J., Dedic V., Musiienko A.: Transient phenomena at Schottky Au-CdZnTe interface. J. Instrument. 13 (2018) C10001

Peer P., Stěnička M., Filip P., Pizúrová N., Babayan V.: Magnetorheological characterization and electrospinnability of ultrasound-treated polymer solutions containing magnetic nanoparticles. Colloid and Polymer Science 296 (2018) 1849-1855

Buršíková V., Homola V., Jirásková Y., Pizúrová N., Miháliková I., Friák M., Koutná N., Slávik A., Holec D., Šob M.: Study of Local Mechanical Properties of Fe78Al22 Alloy. Key Eng. Mater. 784 (2018) 27-32

Náhlík L., Štegnerová K., Hutař P.: Estimation of critical applied stress for crack initiation from a sharp V-notch. Theor. Appl. Fract. Mech. 93 (2018) 247-262

Failamani F., Podloucký R., Buršík J., Rogl G., Michor H., Müller H., Bauer E., Giester G., Rogl P.: Boron-phil and boron-phob structure units in novel borides Ni3Zn2B and Ni2ZnB: experiment and first principles calculations. Dalton Trans. 47 (2018) 3303-3320

Luňáček J., Životský O., Janoš P., Došek M., Chrobak A., Maryško M., Buršík J., Jirásková Y.: Structure and magnetic properties of synthesized fine cerium dioxide nanoparticles. J. Alloys Comp. 753 (2018) 167-175

Ostapovec A., Sheikh-Ali A.: Misorientation dependence of atomic structure and energy of symmetric tilt boundaries in magnesium. Philos. Mag. 98 (2018) 3235-3246

Vazirov R., Sokovnin S., Ilves V., Bazhukova I., Pizúrová N., Kuznetsov M.: Physicochemical Characterization and Antioxidant Properties of Cerium Oxide Nanoparticles. J. Phys.: Conf. Series 1115 (2018) 032094

Vojtek T., Hohenwarter A., Pippan R., Pokluda J.: Influence of Secondary Phase on Intrinsic Threshold and Path of Shear-Mode Fatigue Cracks in Metals. Acta Phys. Pol. A 134 (2018) 699-702

Ševčíková J., Bártková D., Goldbergová M., Kuběnová M., Čermák J., Frenzel J., Weiser A., Dlouhý A.: On the Ni-Ion release rate from surfaces of binary NiTi shape memory alloys. Appl. Surf. Sci. 427 (2018) 434-443

Elhadidy H., Musiienko A., Grill R., Schneeweiss O., Franc J., Moravec P.: Study of electromigration phenomena in Au/p-type CdTe with two Schottky contacts. J. Instrument. 13 (2018) C10002

Čížek J., Brožek V., Chráska T., Lukáč F., Medřický J., Mušálek R., Tesař T., Šiška F., Antoš Z., Čupera J., Matějková M., Špotz Z., Houdková S., Kverka M.: Silver-Doped Hydroxyapatite Coatings Deposited by Suspension Plasma Spraying . J. Thermal Spray Technol. 27 (2018) 1333-1343