Institute of Physics of Materials AS CR, v. v. i. > Groups > Advanced Metallic Materials and Metal Based Composites

Advanced Metallic Materials and Metal Based Composites

Headdoc. Ing. Jan Klusák, Ph.D.
E-mail [javascript protected email address]
Phone number+420 532 290 348
Room118
DepartmentCEITEC IPM

Research areas
Basic mechanisms operating in materials during creep, fatigue, brittle fracture and their combinations in relation to microstructure and their changes

  • Theoretical studies of crack behaviour in metallic materials and components

  • Multi-scale simulation of deformation and fracture processes, quantitative fractography and the prediction of fatigue life under multiaxial loading

  • Solution of problems related to fatigue, creep and brittle fracture of both of currently applied and developed materials in industrial applications


Main objectives
Properties of engineering materials have to be continuously improved in order to achieve higher performance, safety and reliability of engineering systems. The main objective of the research activity of the research group is to study the relation between material structure and material properties, mainly mechanical. The research will be focussed on fatigue, creep, their interaction and fracture properties of advanced materials and metal based composites used or currently being developed for application in energetic, transport and medicine. The expected results cover both the generation of material data necessary for safe and reliable application of engineering structures in service and the extension of basic knowledge on material damage mechanisms.

Researchers


NamePhone numbersRoomsE-mail
Ing. Luca Bertolla, Ph.D. +420 532 290 336 128b bertolla@ipm.cz
RNDr. Jiří Čermák, CSc., DSc. +420 532 290 422 319 cermak@ipm.cz
prof. Ing. Ivo Dlouhý, CSc. +420 532 290 342 117 idlouhy@ipm.cz
Ing. Jiří Dvořák, Ph.D. +420 532 290 397 251 dvorak@ipm.cz
Ing. Petr Dymáček, Ph.D. +420 532 290 411 204 pdymacek@ipm.cz
doc. Ing. Stanislava Fintová, Ph.D. +420 532 290 301 102b fintova@ipm.cz
Ing. Hynek Hadraba, Ph.D. +420 532 290 369 225 hadraba@ipm.cz
Mgr. Milan Heczko, Ph.D. +420 532 290 343 116a heczko@ipm.cz
Ing. Zdeněk Chlup, Ph.D. +420 532 290 335 128a chlup@ipm.cz
prof. Mgr. Tomáš Kruml, CSc. +420 532 290 379 112 kruml@ipm.cz
Ing. Ivo Kuběna, Ph.D. +420 532 290 343 116a kubena@ipm.cz
prof. RNDr. Ludvík Kunz, CSc., dr. h. c. +420 532 290 464 423 kunz@ipm.cz
Mgr. Marie Kvapilová, Ph.D. +420 532 290 374 221a kvapilova@ipm.cz
Ing. Natália Luptáková, Ph.D. +420 532 290 371 219 luptakova@ipm.cz
prof. RNDr. Jaroslav Polák, DrSc., dr. h. c. +420 532 290 366 111 polak@ipm.cz
doc. Ing. Stanislav Seitl, Ph.D. +420 532 290 361 107 seitl@ipm.cz
prof. Ing. Václav Sklenička, DrSc. +420 532 290 454 418 sklen@ipm.cz
Ing. Luděk Stratil, Ph.D. +420 532 290 365 126 stratil@ipm.cz
RNDr. Milan Svoboda, CSc. +420 532 290 474 409 svobm@ipm.cz
Ing. Miroslav Šmíd, Ph.D. +420 532 290 414 207 smid@ipm.cz

Phd students


NamePhone numbersRoomsE-mail
Ing. Vít Horník +420 532 290 357 102a hornik@ipm.cz
Ing. Veronika Mazánová +420 532 290 345 116 mazanova@ipm.cz
Ing. Petr Miarka +420 532 290 361 107 miarka@ipm.cz
Mgr. Roman Petráš +420 532 290 345 116 petras@ipm.cz

Project numberNameInvestigator
8J20AT013 Integrity and durability aspects of recycled aggregates composites (InDuRAC) doc. Ing. Jan Klusák, Ph.D.
19-00408S Material integrity and structure at the early stages during pulsating liquid jet interaction prof. Mgr. Tomáš Kruml, CSc.
CZ.02.1.01/0.0/0.0/16_025/0007304 Architectured materials designed for additive manufacturing (ArMAdit) Ing. Hynek Hadraba, Ph.D.
COMET K2 A1.23 Fundamentals and tools for integrated computational modeling and experimental characterization of materials in the atomic to micrometer scale range (A1.23) RNDr. Jiří Svoboda, CSc., DSc.
LQ1601 CEITEC 2020 doc. Ing. Luboš Náhlík, Ph.D.

ALL PROJECTS

Project numberNameInvestigator
17-23964S Dispersion strengthened high entropy alloys for extreme conditions Ing. Hynek Hadraba, Ph.D.
17-12546S Fundamental aspects of partial pyrolysis of hybrid composites with polysiloxane matrix precursors Ing. Zdeněk Chlup, Ph.D.
17-13573S Architectured metallic materials designed for cold spray kinetization prof. Ing. Ivo Dlouhý, CSc.
17-08153S Novel material architectures for SMART piezoceramic electromechanical converters Ing. Zdeněk Chlup, Ph.D.
16-18702S AMIRI − Aggregate-Matrix-Interface Related Issues in silicate-based composites doc. Ing. Jan Klusák, Ph.D.
CZ.1.07/2.3.00/20.0214 Human Resources Developments in the research of physical and material properties of emerging, newly developed and applied engineering materials doc. Ing. Luboš Náhlík, Ph.D.
263476 RoLiCer - Enhanced reliability and lifetime of ceramic components through multi-scale modelling of degradation and damage Ing. Zdeněk Chlup, Ph.D.
CZ.1.07/2.4.00/17.0006 Building up Cooperation in R&D with the Research and Industrial Partners doc. Ing. Luboš Náhlík, Ph.D.
CZ.1.05/1.1.00/02.0068 CEITEC – Central European Institute of Technology doc. Ing. Luboš Náhlík, Ph.D.

ALL PROJECTS

Physical Property Measurement System (PPMS©) 9T

Contact person: Ing. Oldřich Schneeweiss, DrSc.
EverCool II (2 - 400 K; 0 - 9 T)

High temperature impulse excitation technique IMCE HT1600

Contact person: prof. Ing. Ivo Dlouhý, CSc.
The system allows obtaining temperature dependence of the elastic properties of the material by non-destructive impulse excitation method.

High temperature test system

Contact person: prof. Ing. Ivo Dlouhý, CSc.
A test system is designed for testing at temperatures up to 1600°C. Tests of metals, ceramics and composites can be performed in vacuum or under a protective argon atmosphere.

MTS 809 axial – torsional test system

Contact person: Ing. Jiří Man, Ph.D.
Servohydraulic MTS 809 axial – torsional test system allowing us to perform isothermal fatigue testing with independent bi-axial loading at temperatures from 24°C up to 1400°C.

Creep test system Zwick/Roell - Messphysik KAPPA LA spring 20kN with furnace MAYTEC up to 1400°C

Contact person: Ing. Petr Dymáček, Ph.D.
Creep test system Zwick/Roell - Messphysik KAPPA LA spring 20kN, with furnace MAYTEC up to 1400 °C, testing in Ar protective atmosphere or vacuum.

Creep test system Zwick/Roell - Messphysik KAPPA LA spring 50kN, with furnace MAYTEC up to 1200 °C

Contact person: Ing. Petr Dymáček, Ph.D.
Creep test system Zwick/Roell - Messphysik KAPPA LA spring 50kN, with furnace MAYTEC up to 1200 °C, testing in air and Ar protective atmosphere

Remagraph-Remacomp Combination C710

Contact person: Ing. Oldřich Schneeweiss, DrSc.
at room temperature


2020

Hloch S., Srivastava M., Nag A., Müller M., Hromasová M., Svobodová J., Kruml T., Chlupová A.: Effect of pressure of pulsating water jet moving along stair trajectory on erosion depth, surface morphology and microhardness. Wear 452-453 (2020) 203278

Moravčík I., Hadraba H., Li L., Dlouhý I., Raabe D., Li Z.: Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility. Scr. Mater. 178 (2020) 391-397

Miarka P., Cruces A., Seitl S., Malíková (Šestáková) L., Lopez Crespo P.: Evaluation of the SIF and T-stress values of the Brazilian disc with a central notch by hybrid method . Int. J. Fatigue 135 (2020) 105562

Chlupová A., Heczko M., Obrtlík K., Dlouhý A., Kruml T.: Effect of heat-treatment on the microstructure and fatigue properties of lamellar gama-TiAl alloyed with Nb, Mo and/or C. Mater. Sci. Eng. A 786 (2020) 139427

Wasserbauer J., Buchtík M., Tkacz J., Fintová S., Minda J., Doskočil L.: Improvement of AZ91 Alloy Corrosion Properties by Duplex NI-P Coating Deposition. Materials 13 (2020) 1357

Šťastný P., Chlup Z., Trunec M.: Gel-tape casting as a novel method for the production of flexible fine-grained alumina sheets. J. Eur. Ceram. Soc. 40 (2020) 2542-2547

Akhtar M., Ilyas K., Dlouhý I., Šiška F., Boccaccini A.: Electrophoretic Deposition of Copper(II)-Chitosan Complexes for Antibacterial Coatings. Int. J. Mol. Sci. 21 (2020) 2637

Antoš Z., Vacek P., Gröger R.: Intersections of two stacking faults in zincblende GaN. Comp. Mater. Sci. 180 (2020) 109620

Mertová K., Palán J., Németh G., Fintová S., Duchek M., Studecký T., Veselý J., Máthis K., Džugan J., Trojanová Z.: Optimization of the Mechanical Performance of Titanium for Biomedical Applications by Advanced, High-Gain SPD Technology. Crystals 10 (2020) 10060422

Lehner P., Pařenica P., Krejsa M., Křivý V., Brožovský J., Seitl S., Kala Z.: The general procedure of numerical analysis related to a fatigue damage on the cyclically loaded construction. MATEC Web Conf. 310 (2020) 16

Sklenička V., Král P., Dvořák J., Takizawa Y., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.: Effects of Grain Refinement and Predeformation Impact by Severe Plastic Deformation on Creep in P92 Martensitic Steel. Adv. Eng. Mater. 22 (2020) 1900448

Moravčík I., Horník V., Minárik P., Li L., Dlouhý I., Janovská M., Raabe D., Li Z.: Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy. Mater. Sci. Eng. A 781 (2020) 139242

Seitl S., Pokorný P., Miarka P., Klusák J., Kala Z., Kunz L.: Comparison of fatigue crack propagation behaviour in two steel grades S235, S355 and a steel from old crane way. MATEC Web Conf. 310 (2020) 34

Sklenička V., Kuchařová K., Kvapilová M., Kloc L., Dvořák J., Král P.: High-Temperature Creep Tests of Two Creep-Resistant Materials at Constant Stress and Constant Load. Key Eng. Mater. 827 (2020) 246-251

Šiška F., Čížek J., Seiner H., Dlouhý I.: Numerical analysis of geometrically induced hardening in planar architectured materialss. Composite Structures 233 (2020) 111633-111643

Čermák J., Král L., Roupcová P.: Significantly decreased stability of MgH2 in the Mg-In-C alloy system: Long-period-stacking-ordering as a new way how to improve performance of hydrogen storage alloys?. Renewable Energy 150 (2020) 204-212

Fintová S., Kuběna I., Trško L., Horník V., Kunz L.: Fatigue behavior of AW7075 aluminum alloy in ultra-high cycle fatigue region. Mater. Sci. Eng. A 774 (2020) 138922

Seitl S., Miarka P., Bílek V.: Fatigue and fracture mechanical properties of selected concrete for subtle precast structural elements. MATEC Web Conf. 310 (2020) 33

Dobeš F., Dymáček P., Friák M.: Creep of Heusler-type alloy Fe-25Al-25Co. Crystals 10 (2020) 52

Zhong J., Song M., Guan K., Dymáček P.: Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test. Int. J. Mech. Sci. 166 (2020) 105195

Moravčík I., Gamanov Š., Moravčíková-Goueva L., Kováčová Z., Kitzmantel M., Neubauer E., Dlouhý I.: Influence of Ti on the Tensile Properties of the High-Strength Powder Metallurgy High Entropy Alloys. Materials 13 (2020) 578


Černý M., Chlup Z., Strachota A., Halasová M., Schweigstillová J., Kácha P., Svítilová J.: Potential of glass basalt or carbon fibres for reinforcement of partially pyrolysed compositeswith improved temperature and fire resistance. Ceramics - Silikáty 64 (2020) 115-124

Dymáček P., Dobeš F., Jarý M., Jirásková Y., Pizúrová N., Friák M.: Small punch testing of Fe-Al based alloys with Ti and Nb additions. IOP Conf. Ser.: Mater. Sci. Eng. 723 (2020) 012006

Tatarko P., Grasso S., Kovalčíková A., Medveď D., Dlouhý I., Reece M.: Highly textured and strongly anisotropic TiB2 ceramics prepared using magnetic field alignment (9T). J. Eur. Ceram. Soc. 40 (2020) 1111-1118



2019

Weiser A., Buršíková V., Jarý M., Dymáček P., Dugáček J., Frenzel J., Čermák J., Dlouhý A.: Strength of hydrogen-free and hydrogen-doped Ni50Ti50 shape memory platelets . Scr. Mater. 162 (2019) 151-155

Král P., Dvořák J., Sklenička V., Langdon T.: The Characteristics of Creep in Metallic Materials Processed by Severe Plastic Deformation. Mater. Trans. 60 (2019) 1506-1517

Seitl S., Miarka P., Růžička V., Malíková (Šestáková) L., Cruces A., Lopez Crespo P.: Approximation of the crack-tip field in fatigue cracks in bridge steel specimens: DIC analysis of different constraint levels. Frattura ed Integrita Strutturale 49 (2019) 97-106

Kvapilová M., Dvořák J., Král P., Hrbáček K., Sklenička V.: Creep behaviour and life assessment of a cast nickel - base superalloy MAR - M247. High Temp. Mater. Proc. 38 (2019) 590-600

Hasegawa M., Hirata K., Dlouhý I.: Microstructural Change and Fracture Behavior under Different Heat Exposure Conditions on Thermal Barrier Coatings Deposited on TiAl Intermetallic Compound. Key Eng. Mater. 810 (2019) 27-33

Šulák I., Man J., Obrtlík K.: Mechanisms of fatigue crack initiation and early propagation in cyclically strained nickel superalloy. Procedia Struct. Integr. 23 (2019) 161-166

Vojtek T., Pokorný P., Kuběna I., Náhlík L., Fajkoš R., Hutař P.: Quantitative dependence of oxide-induced crack closure on air humidity for railway axle steel. Int. J. Fatigue 123 (2019) 213-224

Dvořák J., Sklenička V., Král P., Kvapilová M., Svobodová M., Šifner J., Koula V.: DETEKCE PORUCH POMOCÍ AKUSTICKÉ EMISE (AE) V PODMÍNKÁCH VYSOKOTEPLOTNÍHO CREEPU. Zvyšování životnosti komponent energetických zařízení v elektrárnách 14 (2019) 75-80

Fintová S., Drábiková J., Pastorek F., Tkacz J., Kuběna I., Trško L., Hadzima B., Minda J., Doležal P., Wasserbauer J., Ptáček P.: Improvement of electrochemical corrosion characteristics of AZ61 magnesium alloy with unconventional fluoride conversion coatings. Surf. Coat. Technol. 357 (2019) 638-650

Dymáček P., Li Y., Dobeš F., Stevens P.: New approach to determine uniaxial creep properties from small punch creep curves. Materials at High Temperatures 36 (2019) 157-164

Ríos J., Cifuentes Bulte H., Leiva C., Seitl S.: Analysis of the mechanical and fracture behavior of heated ultra-high-performance fiber-reinforced concrete by X-ray computed tomography. Cement and Concrete Research 119 (2019) 77-88

Seitl S., Miarka P., Pokorný P., Fintová S., Kunz L.: COMPARISON OF MECHANICAL PROPERTIES OF OLD STEEL FROM TRUSS CRANE RUNWAY WITH S235 AND S355 GRADES. Trans. VSB TU Ostrava Ser. 19 (2019) 56-60

Dymáček P., Dobeš F., Andrés D.: Notch sensitivity of Sanicro 25 in small punch creep test. Theor. Appl. Fract. Mech. 100 (2019) 383-389

Hasegawa M., Inui T., Dlouhý I.: Effect of Heat Treatment at (Beta+Gama) Two Phase Region on Fracture Toughness in TiAl Intermetallic Compound. Key Eng. Mater. 810 (2019) 21-26

Chlup Z., Černý M., Halasová M., Strachota A.: Behaviour of Partially Pyrolysed Composite Reinforced by Fibres of Various Compositions. Procedia Struct. Integr. 23 (2019) 505-510

Dymáček P., Svoboda J., Jirková H., Stratil L., Horník V.: Microstructure evolution and creep strength of new-generation oxide dispersion strengthened alloys with high volume fraction of nano-oxides. Procedia Struct. Integr. 17 (2019) 427-433

Krepl O., Klusák J.: Multi-parameter failure assessment of a bi-material V-notch-Crack initiation from a free-edge singularity. Theor. Appl. Fract. Mech. 100 (2019) 233-241

Ríos J., Leiva C., Ariza M., Seitl S., Cifuentes Bulte H.: Analysis of the tensile fracture properties of ultra-high-strength fiber-reinforced concrete with different types of steel fibers by X-ray tomography. Mater. & Design 165 (2019) 107582

Seitl S., Růžička V., Miarka P., Sobek J.: ANALYSIS OF VARIOUS CHEVRON NOTCH TYPES AND ITS INFLUENCE ON THE LIGAMENT AREA. Trans. VSB TU Ostrava Ser. 19 (2019) 28-34

Profant T., Hrstka M., Klusák J.: Microcrack interaction with circular inclusion and interfacial zone. Frattura ed Integrita Strutturale 48 (2019) 503-512

Dobeš F., Dymáček P., Hasegawa M., Iwashita M.: High-temperature creep of a CoNiCrAlY bond coat alloy. Mater. Sci. Eng. A 759 (2019) 272-277

Dobeš F., Dymáček P., Friák M.: The Influence of Niobium Additions on Creep Resistance of Fe-27 at. % Al Alloys. Metals 9 (2019) 739

Kotrechko S., Zimina G., Revka V., Dlouhý I.: Engineering Version of Local Approach to Fracture and its Application for RPV Lifetime Prediction. Key Eng. Mater. 810 (2019) 15-20

Chlup Z., Drdlík D., Fides M., Kovalčíková A., Hadraba H.: Properties of BaTiO3/Al2O3 Laminate Structure by Nanoindentation. Procedia Struct. Integr. 23 (2019) 499-504

Ševeček O., Bertolla L., Chlup Z., Řehořek L., Majer Z., Marcián P., Kotoul M.: Modelling of cracking of the ceramic foam specimen with a central notch under the tensile load. Theor. Appl. Fract. Mech. 100 (2019) 242-250

Čížek J., Kovařík O., Šiška F., Bensch J., Čupera J., Matějková M., Siegl J., Chráska T., Khor K.: Increasing Fatigue Endurance of Hydroxyapatite and Rutile Plasma Sprayed Biocomponents by Controlling Deposition In-Flight Properties. ACS Biomaterials Science & Engineering 5 (2019) 1703-1714

Dobeš F., Dymáček P., Komazaki S., Li Y.: Towards the development of a universal formula for conversion of Small Punch data to Conventional Creep data. Proc. 10th Japan-China Symp. High Temp. Strength of Mater. - (2019) 370-373

Zábranský L., Souček P., Vašina P., Dugáček J., Sťahel P., Buršík J., Svoboda M., Mikšová R., Peřina V., Balázsi K., Cigány Z., Buršíková V.: Microstructural changes of amorphous Mo?B?C coatings upon thermal annealing. Surf. Coat. Technol. 379 (2019) 125052

Sofinowski K., Šmíd M., Kuběna I., Vives S., Casati N., Godet S., Van Swygenhoven H.: In situ characterization of a high work hardening Ti-6Al-4V prepared by electron beam melting. Acta Mater. 179 (2019) 224-236

Jurči P., Ďurica J., Dlouhý I., Horník J., Planieta R., Kralovič D.: Application of -140 °C Sub-Zero Treatment For Cr-V Ledeburitic Steel Service Performance Improvement. Metall. Mater. Trans. A 50 (2019) 2413-2434

Dymáček P., Dobeš F., Jirásková Y., Pizúrová N., Friák M.: Tensile, creep and fracture testing of prospective Fe-Al-based alloys using miniature specimens. Theor. Appl. Fract. Mech. 99 (2019) 18-26

Heczko M., Esser B., Gröger R., Feng L., Mazánová V., Wang Y., Mills M.: Structure, Morphology and Coarsening Behavior of MX (NbC) Nanoprecipitates in Fe-Ni-Cr Based Alloys. Microscopy and Microanalysis 25 (2019) 2612-2613

Barbalini M., Bertolla L., Toušek J., Malucelli G.: Hybrid Silica-Phytic Acid Coatings: Effect on the Thermal Stability and Flame Retardancy of Cotton. Polymers 11 (2019) 1-22

Kala Z., Omishore A., Seitl S., Krejsa M., Kala J.: Identification of variation coefficient of equivalent stress range of steel girders with cracks. INTERNATIONAL JOURNAL OF MECHANICS 13 (2019) 69-78

Seitl S., Miarka P., Šimonová H., Frantík P., Keršner Z., Domski J., Katzer J.: Change of Fatigue and Mechanical Fracture Properties of a Cement Composite due to Partial Replacement of Aggregate by Red Ceramic Waste. PERIODICA POLYTECHNICA-CIVIL ENGINEERING 63 (2019) 152-159

Dobeš F., Dymáček P., Friák M.: Force-to-Stress Conversion Methods in Small Punch Testing Exemplified by Creep Results of Fe-Al Alloy with Chromium and Cerium Additions. IOP Conf. Ser.: Mater. Sci. Eng. 461 (2019) 012017

Kunčická L., Král P., Dvořák J., Kocich R.: WE43 BIOCOMPATIBLE ALLOY AFTER SEVERE PLASTIC DEFORMATION: STRUCTURE CHARACTERIZATION. METAL 2019 Conf. Proc. 1 (2019) 1284-1290

Gröger R., Chlup Z., Kuběnová T., Kuběna I.: Interplay of slip and twinning in niobium single crystals compressed at 77 K. J. Mater. Res. 34 (2019) 261-270

Luptáková N., Dymáček P., Jarý M., Záležák T.: Failure analysis of a gripping assembly loaded at temperatures above 1000 °C. Eng. Fail. Anal. 96 (2019) 384-393

Jurči P., Dlouhý I., Horník J., Priknerová P., Mrštný Z.: Relationships between the Microstructure, Hardness and Fracture toughness of Differently Sub-Zero Treated Tool Steel. Defect Diffus. Forum 395 (2019) 95-112

Husák R., Hadraba H., Chlup Z., Heczko M., Kruml T., Puchý V.: ODS EUROFER Steel Strengthened by Y-(Ce, Hf, La, Sc, and Zr) Complex Oxides. Metals 9 (2019) 1148

Krejsa M., Koktan J., Janas P., Brožovský J., Seitl S., Kala Z., Krejsa V.: Parallelization in DOProC method and its using in probabilistic modelling of fatigue problems. AIP Conference Proceedings 2116 (2019) 120007

Miarka P., Seitl S., Bílek V.: Mixed-mode fracture analysis in high-performance concrete using a Brazilian disc test. Mater. Technol. 53 (2019) 233-238

Klusák J., Krepl O., Profant T.: An easy and engineering stability criterion of general singular stress concentrators. Theor. Appl. Fract. Mech. 104 (2019) 102341

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Strain Rate Contribution due to Dynamic Recovery of Ultrafine-Grained Cu-Zr as Evidenced by Load Reductions during Quasi-Stationary Deformation at 0.5 Tm. Metals 9 (2019) 1150

Král L., Čermák J.: Improvement of hydrogen storage properties of Mg by catalytic effect of Al-containing phases in Mg-Al-Ti-Zr-C powders. Int. J. Hydrogen Energy 44 (2019) 13561-13568

Kusý M., Rízeková-Trnková L., Krajčovič J., Dlouhý I., Jurči P.: Can Sub-zero Treatment at -75 °C Bring Any Benefits to Tools Manufacturing?. Materials 12 (2019) 3827

Tofel P., Machů Z., Chlup Z., Hadraba H., Drdlík D., Ševeček O., Majer Z., Holcman V., Hadaš Z.: Novel layered architecture based on Al2O3/ZrO2/BaTiO3 for SMART piezoceramic electromechanical converters. The European Physical Journal Special Topics 228 (2019) 1575-1588

Chlup Z., Fintová S., Hadraba H., Kuběna I., Vilémová M., Matějíček J.: Fatigue Behaviour and Crack Initiation in CoCrFeNiMn High-Entropy Alloy Processed by Powder Metallurgy. Metals 9 (2019) 1-12

Miarka P., Seitl S., De Corte W.: Notch tip displacements of the concrete Brazilian disc test with central notch analysed by the concrete damaged plasticity model. Theor. Appl. Fract. Mech. 102 (2019) 122-150

Mazánová V., Heczko M., Škorík V., Chlupová A., Polák J., Kruml T.: Microstructure and martensitic transformation in 316L austenitic steel during multiaxial low cycle fatigue at room temperature. Mater. Sci. Eng. A 767 (2019) 138407

Profant T., Hrstka M., Klusák J.: An asymptotic analysis of crack initiation from an interfacial zone surrounding the circular inclusion. Composite Struct. 208 (2019) 479-497

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Quasi-Stationary Strength of ECAP-Processed Cu-Zr at 0.5 Tm. Metals 9 (2019) 1149

Tinoco Navarro H., Holzer J., Pikálek T., Buchta Z., Lazar J., Chlupová A., Kruml T., Hutař P.: Determination of elastic parameters of Si3N4 thin films by means of a numerical approach and bulge tests. Thin Solid Films 672 (2019) 66-74

Čermák J., Král L., Roupcová P.: Improved hydrogen sorption kinetics in Mg modified by chosen catalysts. Int. J. Hydrogen Energy 44 (2019) 8315-8324

Bertolla L., Dlouhý I., Bartoníčková E., Toušek J., Nováček J., Mácová P.: Deconstruction of microfibrillated cellulose into nanocrystalline cellulose rods and mesogenic phase formation in concentrated low-modulus sodium silicate solution. Cellulose 26 (2019) 4325-4344

Neuberger H., Rey J., Arbeiter F., Hernandez F., Ruck S., Koehly C., Stratil L., Niewöhner R., Felde A.: Evaluation of conservative and innovative manufacturing routes for gas cooled Test Blanket Module and Breeding Blanket First Wall. Fusion Eng. & Design 146 (2019) 2140-2143

Javed H., Sabato A., Dlouhý I., Halasová M., Bernardo E., Salvo M., Herbrig K., Walter C., Smeacetto F.: Shear Performance at Room and High Temperatures of Glass?Ceramic Sealants for Solid Oxide Electrolysis Cell Technology. Materials 12 (2019) 298

Vyhlídal M., Klusák J.: The influence of polygonal cavity on fracture behaviour of concrete. Procedia Struct. Integr. 17 (2019) 690-697

Fintová S., Drábiková J., Hadzima B., Trško L., Březina M., Doležal P., Wasserbauer J.: Degradation of unconventional fluoride conversion coating on AZ61 magnesium alloy in SBF solution. Surf. Coat. Technol. 380 (2019) 125012

Šulák I., Obrtlík K., Hrbáček K.: Effect of casting conditions and heat treatment on high temperature low cycle fatigue performance of nickel superalloy Inconel 713LC. METAL 2019 Conf. Proc. 1 (2019) 1351-1356

Halasová M., Kuběna I., Roupcová P., Černý M., Strachota A., Chlup Z.: Iron precipitation in basalt fibres embedded in partially pyrolysed methylsiloxane matrix. Composites Part A 123 (2019) 286-292

Nový F., Jambor M., Petrů M., Trško L., Fintová S., Bokůvka O.: Investigation of the brittle fracture of the locomotive draw hook. Eng. Fail. Anal. 105 (2019) 305-312

Kunčická L., Král P., Dvořák J., Kocich R.: Texture Evolution in Biocompatible Mg-Y-Re Alloy After Friction Stir Processing. Metals 9(11) (2019) 1181

Dymáček P., Bártková D., Horník V., Stratil L., Mašek B., Svoboda J.: New Generation of ODS Alloys. Key Eng. Mater. 810 (2019) 113-118

Oplt T., Hutař P., Pokorný P., Náhlík L., Chlup Z., Berto F.: Effect of the free surface on the fatigue crack front curvature at high stress asymmetry. Int. J. Fatigue 118 (2019) 249-261

Sklenička V., Kuchařová K., Svoboda M., Kvapilová M., Král P., Dvořák J.: Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations. Int. J. Pres. Ves. Pip. 178 (2019) 104000

Seitl S., Miarka P., Pokorný P., Klusák J.: Influence of corrosion on fatigue behaviour of old crane runway steel. The Journal of Strain Analysis for Engineering Design 54 (2019) 416-423

Gianchandani P., Casalegno V., Salvo M., Ferraris M., Dlouhý I.: Refractory Metal, RM - Wrap: A tailorable, pressure-less joining technology. Ceram. Int. 45 (2019) 4824-4834

Hasegawa M., Iwashita M., Kubota Y., Dymáček P., Dobeš F.: Microstructure evolution under high temperature deformation of CoNiCrAlY bond coat alloy. Mater. Sci. Eng. A 756 (2019) 237-247

Král P., Staněk J., Kunčická L., Seitl F., Petrich L., Schmidt V., Beneš V., Sklenička V.: Microstructure changes in HPT-processed copper occurring at room temperature. Mater. Character. 151 (2019) 602-611

Klusák J., Seitl S.: Very high cycle fatigue tests of high strength steels S355 J0 and S355 J2. Procedia Struct. Integr. 17 (2019) 576-581

Dlouhý I., Řehořek L., Seiner H., Čížek J., Šiška F.: Architectured Multi-Metallic Structures Prepared by Cold Dynamic Spray Deposition. Key Eng. Mater. 810 (2019) 107-112

Kuběna M., Eliáš M., Zajíčková L., Poduška J., Kruml T.: On the strengthening of polyurethane matrix by carbon nanotubes. Adv. Mater. Sci. Eng. 2019 (2019) 6598452

Hadzima B., Pastorek F., Borko K., Fintová S., Kajánek D., Bagherifard S., Gholami-Kermanshahi M., Trško L., Pastorková J., Brezina J.: Effect of phosphating time on protection properties of hurealite coating: Differences between ground and shot peened HSLA steel surface. Surf. Coat. Technol. 375 (2019) 608-620