2024
Kocich R., Kunčická L., Benč M., Weiser A., Németh G.: Corrosion behavior of selective laser meltingmanufactured bio-applicable 316L stainless steel in ionized simulated body fluid. Int. J. Bioprinting 10 (2024) 339-356
Poloprudský J., Gamanov Š., Chlupová A., Klichová D., Nag A., Stolárik G., Hloch S.: Water droplet erosion assessment in the initial stages on AISI 316L using kernel average misorientation. Tribology International 191 (2024) 109165
Král P., Dvořák J., Kvapilová M., Kadomtsev A., Sklenička V.: Enhancement of creep lifetime of aluminum through severe plastic deformation. Crystals 14 (2024) 230
Govind K., Oliveros D., Dlouhý A., Legros M., Sandfeld S.: Deep learning of crystalline defects from TEM images: a solution for the problem of 'never enough training data'. Mach. Learn.: Sci. Technol. 5 (2024) 015006
Flachberger W., Svoboda J., Antretter T., Petersmann S., Leitner S.: Numerical treatment of reactive diffusion using the discontinuous Galerkin method. Contin. Mech. Thermodyn. 360 (2024) 61-74
Šulák I., Chlupová A., Poloprudský J., Svoboda J.: Cyclic plastic response of rotary swaged Fe-14Cr-10Al-4Y2O3 ODS alloy at 1000 -1200 °C. Mater. Character. 207 (2024) 113519
Gamanov Š., Dlouhý A., Bürger D., Eggeler G., Thome P.: Evolution of local misorientations in the gamma/gamma prime - microstructure of single crystal superalloys during creep studied with the rotation vector baseline (RVB) EBSD method. Microsc. Res. Tech. 87 (2024) 516-533
2023
Khalaj O., Jamshidi M., Hassas P., Hosseininezhad M., Mašek B., Štádler C., Svoboda J.: Metaverse and AI digital twinning of 42SiCr steel alloys. Mathematics 11 (2023) 4
Šromová V., Sobola D., Kaspar P.: A brief review of bone cell function and importance. Cells 12 (2023) 2576
Polat O., Coskun F., Yildirim Y., Roupcová P., Sobola D., Sen C., Durmus Z., Caglar M., Turut .: Variation in the dielectric and magnetic characteristics of multiferroic LuFeO3 as a result of cobalt substitution at Fe sites. J. Alloys Comp. 963 (2023) 170939
Sklenička V., Král P., Dvořák J., Kvapilová M., Kuchařová K.: Creep in nanostructured materials. Mater. Trans. 64 (2023) 1566-1574
Al-Anber M., Al-Qaisi W., Al-Momani ., Sobola D., Hijazi ., Mousa M., Madanat M.: Utilization of silica gel nanoparticles for selective capturing aqueous uranyl ion. J. Radioanal. Nucl. Chem. 332 (2023) 4993-5006
Svoboda J., Hackl K., Fischer F.: A note on maxima and minima of dissipation in context of treatment of irreversible thermodynamic systems by application of Extremal Principles. Scr. Mater. 233 (2023) 115519
Kocich R., Kunčická L.: Optimizing structure and properties of Al/Cu laminated conductors via severe shear strain. J. Alloys Comp. 953 (2023) 170124
Scheiber D., Svoboda J., Fischer F., Böhm H., Romaner L.: Fully coupled segregation and precipitation kinetics model with ab initio input for the Fe-Au system. Acta Mater. 244 (2023) 118577
Babinský T., Šulák I., Kuběna I., Man J., Weiser A., Švábenská E., Englert L., Guth S.: Thermomechanical fatigue of additively manufactured 316L stainless steel. Mater. Sci. Eng. A 869 (2023) 144831
Kunčická L., Kocich R.: Effect of stacking sequence on mechanical properties and microstructural features within Al/Cu laminates. Materials 16 (2023) 6555
Polat O., Coskun F., Yildirim Y., Sobola D., Ercelik M., Arikan M., Coskun M., Sen C., Durmus Z., Caglar Y., Caglar M., Turut .: The structural studies and optical characteristics of phase-segregated Ir-doped LuFeO3-delta films. Appl. Phys. A 129 (2023) 198
Sklenička V., Kuchařová K., Král P., Dvořák J., Kvapilová M., Vrtílková V., Krejčí J.: Investigation of the thermal creep behaviour of non-irradiated Zr1%Nb cladding alloys between 623 and 1223K. J. Nucl. Mater. 583 (2023) 154518
Al-Anber M., Al Ja´afreh M., Al-Momani ., Hijazi ., Sobola D., Sagadevan S., Al Bayaydah S.: Loading of silver (I) ion in L-cysteine-functionalized silica gel material for aquatic purification. Gels 9 (2023) 865
Kunčická L., Jambor M., Král P.: High pressure torsion of copper; effect of processing temperature on structural features, microhardness and electric conductivity. Materials 16 (2023) 2738
Neuberger H., Hernandez F., Rieth M., Bonnekoh C., Stratil L., Dlouhý I., Dymáček P., Müller O., Adler L., Kunert U.: Cold Spray metal powder deposition with 9 %Cr-steel applied for the HCPB First Wall fabrication: Proof of concept and options for ODS steel processing. Nucl. Mater. Energy 35 (2023) 101427
Ronoh K., Sobola D., Mrňa L., Novotný J., Dallaev R., Knápek A., Kolařík V., Holcman V.: Characterization of the picosecond laser-ablated HOPG using Raman spectroscopy and SEM microscopy. Materials Today Communications 34 (2023) 105181
Mayer M., Svoboda J., Mendez-Martin ., Fellner ., Gammer C., Razumovskiy V., Resch L., Sprengel W., Stark A., Zeisl S., Ressel G.: From microscopic to atomistic scale: Temperature effect on yttria distribution in mechanically alloyed FeCrMnNiCo powder particles. J. Alloys Comp. 968 (2023) 171850
Dobeš F., Dymáček P.: Creep behavior of squeeze-cast Mg-15Gd alloy. Crystals 13 (2023) 374
Němec J., Kunčická L., Opěla P., Dvořák K.: Determining hot deformation behavior and rheology laws of selected austenitic stainless steels. Metals 13 (2023) 1902
Ronoh K., Fawaeer S., Holcman V., Knápek A., Sobola D.: Comprehensive characterization of different metallic thin films on highly oriented pyrolytic graphite substrate. Vacuum 215 (2023) 112345
Kocich R., Kunčická L., Benč M.: Development of microstructure and properties within oxide dispersion strengthened steel directly consolidated by hot rotary swaging. Mater. Lett. 353 (2023) 135276
Svoboda J., Kocich R., Gamanov Š., Kunčická L., Luptáková N., Dymáček P.: Processing window for hot consolidation by rolling and rotary swaging of Fe-10Al-4Cr-4Y2O3 ODS nanocomposite. Materials Today Communications 34 (2023) 105393
Khalaj O., Jamshidi M., Hassas P., Mašek B., Štádler C., Svoboda J.: Digital twinning of a magnetic forging holder to enhance productivity for industry 4.0 and metaverse. Processes 11 (2023) 1703
Gamanov Š., Luptáková N., Bořil P., Jarý M., Mašek B., Dymáček P., Svoboda J.: Mechanisms of plastic deformation and fracture in coarse grained Fe-10Al-4Cr-4Y2O3 ODS nanocomposite at 20-1300°C. Journal of Materials Research and Technology 24 (2023) 4863-4874
2022
Balog M., Křižík P., Dvořák J., Bajana O., Krajčovič J., Drienovsky M.: Industrially fabricated in-situ Al-AlN metal matrix composites (part B): The mechanical, creep, and thermal properties. J. Alloys Comp. 909 (2022) 164720
Oladijo S., Mwema F., Jen T., Ronoh K., Sobola D., Akinlabi E.: Nanoscale surface dynamics of RF-magnetron sputtered CrCoCuFeNi high entropy alloy thin films. Materials Today Communications 33 (2022) 104523
Kunčická L., Kocich R.: Effect of activated slip systems on dynamic recrystallization during rotary swaging of electro-conductive Al-Cu composites. Mater. & Design 321 (2022) 132436
Mazánová V., Heczko M., Polák J.: On the mechanism of fatigue crack initiation in high-angle grain boundaries. Int. J. Fatigue 158 (2022) 106721
Drdlíková K., Klement R., Svoboda J., Drdlík D., Galusek D., Maca K.: Luminescent Dy3+ and Dy3+/Cr3+ doped transparent Al2O3 ceramics: Microstructure and optical properties. J. Eur. Ceram. Soc. 42 (2022) 4343-4352
Vrchovecká K., Weiser A., Přibyl J., Kuta J., Holzer J., Pávková Goldbergová M., Sobola D., Dlouhý A.: A release of Ti-ions from nanostructured titanium oxide surfaces. Surfaces and Interfaces 29 (2022) 101699
Dobeš F., Hadraba H., Chlup Z., Matějíček J.: Different Types of Particle Effects in Creep Tests of CoCrFeNiMn High-Entropy Alloy. Materials 15 (2022) 7363
Leitner S., Ecker W., Fischer F., Svoboda J.: Thermodynamic trapping and diffusion model for multiple species in systems with multiple sorts of traps. Acta Mater. 233 (2022) 117940
Svoboda J., Gamanov Š., Bártková D., Luptáková N., Bořil P., Jarý M., Mašek B., Holzer J., Dymáček P.: The Optimization of Mechanical Alloying Conditions of Powder for the Preparation of a Fe-10Al-4Cr-4Y2O3 ODS Nanocoposite. Materials 15 (2022) 9034
Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Král L., Kvapilová M., Roupcová P., Horváth J.: Creep Resistance of S304H Austenitic Steel Processed by High-Pressure Sliding. Materials 15 (2022) 331
Ramazanov S., Sobola D., Talu S., Orudzev F., Arman A., Kaspar P., Dallaev R., Ramazanov G.: Multiferroic behavior of the functionalized surface of a flexible substrate by deposition of Bi2O3 and Fe2O3. Microsc. Res. Tech. 85 (2022) 1300-1310
Holzer J., Gamanov Š., Luptáková N., Dlouhý A., Svoboda J.: Coarsening Kinetics of Y2O3 Dispersoid in New Grade of Fe-Al-Cr-Based ODS Alloy. Metals 12 (2022) 12020210
Gamanov Š., Holzer J., Roupcová P., Svoboda J.: High temperature oxidation kinetics of Fe 10Al 4Cr 4Y2O3 ODS alloy at 1200 1400 C. Corros. Sci. 206 (2022) 110498
Dvořák J., Král P., Kadomtsev A., Betekhtin V., Narykova M., Kvapilová M., Sklenička V.: Influence of Cryo-Processing and Post-SPD Annealing on Creep Behavior of CP Titanium. Materials 15 (2022) 1646
Pisarenko T., Papež N., Sobola D., Talu S., Částková K., Škarvada P., Macků R., Ščasnovič E., Kastyl J.: Comprehensive Characterization of PVDF Nanofibers at Macro- and Nanolevel. Polymers 14 (2022) 593
Vogric M., Kozeschnik E., Svoboda J., Führer M., Kreyca J., Wei W., Povoden-Karadeniz E.: Kinetic Modeling of Grain Boundary Cementite Evolution. Metall. Mater. Trans. A 53 (2022) 3759-3773
Heep L., Bürger D., Bonnekoh C., Wollgramm P., Dlouhý A., Eggeler G.: The effect of deviations from precise [001] tensile direction on creep of Ni-base single crystal superalloys. Scr. Mater. 207 (2022) 114274
Kvapilová M., Ohanková M., Král P., Dvořák J., Kuchařová K., Čmakal J., Sklenička V.: Characterization of creep properties and the microstructure of a service-exposed low alloy CrMoV steel steam pipe. Mater. Sci. Eng. A 853 (2022) 143684
Tofel P., Částková K., Říha D., Sobola D., Papež N., Kaštyl J., Talu S., Hadaš Z.: Triboelectric Response of Electrospun Stratified PVDF and PA Structures. Nanomaterials 12 (2022) 349
Dabees S., Mirzaei S., Kaspar P., Holcman V., Sobola D.: Characterization and Evaluation of Engineered Coating Techniques for Different Cutting Tools-Review. Materials 15 (2022) 5633
Kunčická L., Kocich R., Kačor P., Jambor M., Marek M.: Characterising Correlations between Electric Conductivity and Structural Features in Rotary Swaged Al/Cu Laminated Conductors. Materials 15 (2022) 1003
Kunčická L., Kocich R., Benč M., Dvořák J.: Affecting Microstructure and Properties of Additively Manufactured AISI 316L Steel by Rotary Swaging. Materials 15 (2022) 6291
Svoboda J., Drdlíková K., Drdlík D., Kroupa A., Michalička J., Maca K.: Doping of alumina ceramics by manganese Thermodynamical and experimental approach. Process. Appl. Ceram. 16 (2022) 13-21
Svoboda J., Bořil P., Holzer J., Luptáková N., Jarý M., Mašek B., Dymáček P.: Substantial Improvement of High Temperature Strength of New-Generation Nano-Oxide-Strengthened Alloys by Addition of Metallic Yttrium. Materials 15 (2022) 15020504
Polat O., Coskun F., Roupcová P., Sobola D., Durmus Z., Caglar M., Šikola T., Turut .: The Os substitution into Fe sites in LuFeO3 multiferroic and its effects on the electrical and dielectric features. J. Alloys Comp. 911 (2022) 165035
Papež N., Pisarenko T., Ščasnovič E., Sobola D., Talu S., Dallaev R., Částková K., Sedlák P.: A Brief Introduction and Current State of Polyvinylidene Fluoride as an Energy Harvester. Coatings 12 (2022) 1429
Betekhtin V., Kadomtsev A., Narykova M., Amosová O., Kolobov Y., Sklenička V., Dvořák J.: Effect of the Structural State and Oxide Coating on the Mechanostability of VT1-0 Titanium upon Its Cyclic Loading. Physics of the Solid State 1 (2022) 1901-1905
Khalaj O., Saebnoori E., Mašek B., Štádler C., Hassas P., Svoboda J.: The Influence of Cooling Rate between Ms and Mf on the Mechanical Properties of Low Alloy 42SiCr Steel Treated by the Q-P Process. Metals 12 (2022) 2081
Kunčická L., Kocich R., Kačor P., Jambor M., Jopek M.: Influence of (Sub) Structure Development within Rotary Swaged Al?Cu Clad Conductors on Skin Effect during Transfer of Alternating Current. Materials 15 (2022) 650
Dymáček P., Kocich R., Kunčická L., Jarý M., Luptáková N., Holzer J., Mašek B., Svoboda J.: Processing of top creep and oxidation resistant Fe-Al based ODS alloys. Procedia Struct. Integr. 42 (2022) 1576-1583
Svoboda J., Zickler G., Kozeschnik E., Fischer F.: Generalization of classical Hillert's grain growth and LSW theories to a wide family of kinetic evolution equations and stationary distribution functions. Acta Mater. 235 (2022) 118085
Mayer M., Ressel G., Svoboda J.: The Effect of Cryogenic Mechanical Alloying and Milling Duration on Powder Particles Microstructure of an Oxide Dispersion Strengthened FeCrMnNiCo High-Entropy Alloy. Metall. Mater. Trans. A 53 (2022) 573-584
Kunčická L., Kocich R., Németh G., Dvořák K., Pagáč M.: Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion. Additive Manufacturing 59 (2022) 103128
Edalati K., Bachmaier A., Beloshenko V., Beygelzimer Y., Blank V., Botta W., Bryla K., Čížek J., Divinski S., Enikeev N., Estrin Y., Faraji G., Figueiredo R., Fuji M., Furuta T., Grosdidier T., Gubicza J., Hohenwarter A., Král P., Sklenička V.: Nanomaterials by severe plastic deformation: review of historical developments and recent advances. Materials Research Letters 10 (2022) 163-256
Böhm H., Zickler G., Fischer F., Svoboda J.: Strain and interface energy of ellipsoidal inclusions subjected to volumetric eigenstrains: shape factors. Arch. Appl. Mech. 92 (2022) 405-411
Moravčík I., Zelený M., Dlouhý A., Hadraba H., Moravčíková-Goueva L., Papež P., Fikar O., Dlouhý I., Raabe D., Li Z.: Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments. Sci. Technol. Adv. Mater. 23 (2022) 376-392
Pechoušek J., Kuzmann E., Vondrášek R., Olina A., Vrba V., Kouřil L., Ingr T., Král P., Mashlan M.: Successive Grinding and Polishing Effect on the Retained Austenite in the Surface of 42CrMo4 Steel. Metals 12 (2022) 119
Štefančík M., Válková L., Veverková J., Weiser A., Dlouhý A., Ryba L., Pávková Goldbergová M.: NiTi alloys exposure alters miR-124 expression in physiological and osteoarthritic osteoblasts. Acta Chir Orthop Traumatol Cech. 89 (2022) 370-375
Kunčická L., Kocich R., Jambor M.: Shear strain induced recrystallization/recovery phenomena within rotary swaged Al/Cu composite conductors. Mater. Character. 194 (2022) 112399
2021
Chlupová A., Šulák I., Kunčická L., Kocich R., Svoboda J.: Microstructural aspects of new grade ODS alloy consolidated by rotary swaging. Mater. Character. 181 (2021) 111477
Orudzhev F., Ramazanov S., Sobola D., Kaspar P., Trčka T., Částková K., Kastyl J., Zvereva I., Wang C., Selimov D., Gulakhmedov R., Abdurakhmanov M., Shuaibov A., Kadiev M.: Ultrasound and water flow driven piezophototronic effect in self-polarized flexible alpha-Fe2O3 containing PVDF nanofibers film for enhanced catalytic oxidation. Nano Energy 90 (2021) 106586
Kunčická L., Jambor M., Weiser A., Dvořák J.: Structural Factors Inducing Cracking of Brass Fittings. Materials 14 (2021) 3255
Kunčická L., Halama R., Fusek M.: Special Issue: Selected Papers from Experimental Stress Analysis 2020. Materials 14 (2021) 1136
Sklenička V., Kuchařová K., Kvapilová M., Král P., Dvořák J.: The transition from the power-law to the power-law breakdown regimes in thermal creep of Zr1%Nb cladding alloys. Kovové materiály 59 (2021) 279-289
Khalaj O., Jamshidi M., Saebnoori E., Mašek B., Štádler C., Svoboda J.: Hybrid Machine Learning Techniques and Computational Mechanics: Estimating the Dynamic Behavior of Oxide Precipitation Hardened Steel. IEEE ACCESS 9 (2021) 156930-156946
Sobola D., Kaspar P., Částková K., Dallaev R., Papež N., Sedlák P., Trčka T., Orudzhev F., Kaštyl J., Weiser A., Knápek A., Holcman V.: PVDF Fibers Modification by Nitrate Salts Doping. Polymers 13 (2021) 2439
Polat O., Coskun F., Roupcová P., Sobola D., Durmus Z., Caglar M., Šikola T., Turut .: Influence of iridium (Ir) doping on the structural, electrical, and dielectric properties of LuFeO3 perovskite compound. J. Alloys Comp. 877 (2021) 160282
Heczko M., Mazánová V., Gröger R., Záležák T., Hooshmand M., George E., Mills M., Dlouhý A.: Elemental segregation to lattice defects in the CrMnFeCoNi high-entropy alloy during high temperature exposures. Acta Mater. 208 (2021) 116719
Li Y., Dymáček P., Hurst R., Stevens P.: A novel metodology for determining creep crack initiation and growth properties using FEM with notched small punch specimens. Theor. Appl. Fract. Mech. 116 (2021) 103112
Böhm H., Zickler G., Fischer F., Svoboda J.: Role of elastic strain energy in spheroidal precipitates revisited. Mech. Mater. 155 (2021) 103781
Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kuchařová K., Kvapilová M., Svobodová M.: Microstructure changes occurring in heat-resistant steels during severe plastic deformation and subsequent creep. IOP Conf. Ser.: Mater. Sci. Eng. 1178 (2021) 012033
Sklenička V., Král P., Kuchařová K., Kvapilová M., Dvořák J., Kloc L.: Thermal creep fracture of a Zr1%Nb cladding alloy in the alpha and (alpha+beta) phase regions. J. Nucl. Mater. 553 (2021) 152950
Král P., Dvořák J., Král L., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kunčická L., Kvapilová M., Svobodová M.: Paper 035: Creep behaviour and microstructure changes of heat resistant steel P92 processed by severe plastic deformation. ECCC 2021, 5th Int. Creep and Fract. Conf. 2021 (2021) 123-132
Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kunčická L., Kvapilová M., Ohanková M.: Influence of High Pressure Sliding and Rotary Swaging on Creep Behavior of P92 Steel at 500 °C. Metals 11 (2021) 2044
Sklenička V., Dvořák J., Král P., Betekhtin V., Kadomtsev A., Narykova M., Dobatkin S., Kuchařová K., Kvapilová M.: Influence of a prior pressurization treatment on creep behaviour of an ultrafine-grained Zr-2.5%Nb alloy. Mater. Sci. Eng. A 820 (2021) 141570
Sedlak P., Sobola D., Gajdos A., Dallaev R., Nebojsa A., Kubersky P.: Surface Analyses of PVDF/NMP/[EMIM][TFSI] Solid Polymer Electrolyte. Polymers 13 (2021) 2678
Dvořák J., Sklenička V., Král P., Kvapilová M., Svobodová M., Šifner J., Koula V.: Studie odhadu creepového poškození oceli pro energetická zařízení. Životnost komponent energetických zařízení 16 (2021) 93-99
Oliveros D., Fraczkiewicz A., Dlouhý A., Zhang C., Song H., Sandfeld S., Legros M.: Orientation-related twinning and dislocation glide in a cantor high entropy alloy at room and cryogenic temperature studied by in situ TEM straining. Mater. Chem. Phys. 272 (2021) 124955
Trávníček L., Kuběna I., Mazánová V., Vojtek T., Polák J., Hutař P., Šmíd M.: Advantageous Description of Short Fatigue Crack Growth Rates in Austenitic Stainless Steels with Distinct Properties. Metals 11 (2021) 475
Král P., Dvořák J., Sklenička V., Masuda T., Tang Y., Horita Z., Kunčická L., Kuchařová K., Kvapilová M., Svobodová M.: Effect of severe plastic deformation on creep behaviour and microstructure changes of P92 at 923 K. Kovové materiály 59 (2021) 141 -148
Kunčická L., Jopek M., Kocich R., Dvořák K.: Determining Johnson-Cook Constitutive Equation for Low-Carbon Steel via Taylor Anvil Test. Materials 14 (2021) 4821
Shabanov N., Rabadanov K., Gafurov M., Isaev A., Sobola D., Suleimanov S., Amirov A., Asvarov A.: Lignin-Based Gel Polymer Electrolyte for Cationic Conductivity. Polymers 13 (2021) 2306
Heczko M., George E., Mazánová V., Ghazisaeidi M., Slone C., Polák J., Shih M., Mills M.: Role of deformation twinning in fatigue of CrCoNi medium-entropy alloy at room temperature. Scr. Mater. 202 (2021) 113985
Kvapilová M., Král P., Dvořák J., Sklenička V.: High Temperature Creep Behaviour of Cast Nickel-Based Superalloys INC 713 LC, B1914 and MAR-M247. Metals 11 (2021) 152
Khalaj O., Ghobadi M., Saebnoori E., Zarezadeh A., Shishesaz M., Mašek B., Štádler C., Svoboda J.: Development of Machine Learning Models to Evaluate the Toughness of OPH Alloys. Materials 14 (2021) 6713
Král P., Dvořák J., Kunčická L., Kocich R., Kvapilová M., Svobodová M., Sklenička V.: Influence of Rotary Swaging on Creep Behaviour of P92 Steel. IOP Conf. Ser.: Mater. Sci. Eng. 1190 (2021) 012033
Dvořák J., Kadomtsev A., Betekhtin V., Sklenička V., Král P., Kvapilová M.: Creep behaviour of ultrafine-grained CP titanium processed by multipass rolling. IOP Conf. Ser.: Mater. Sci. Eng. 1178 (2021) 012013
Fintová S., Kuběna I., Jarý M., Luptáková N., Stratil L., Šiška F., Svoboda J.: Creep properties of heat-treated Fe-Al-O ODS alloy. Kovové materiály 59 (2021) 39-50
Kunčická L., Kocich R.: Effects of Temperature (In)homogeneity during Hot Stamping on Deformation Behavior, Structure, and Properties of Brass Valves. Adv. Eng. Mater. 12 (2021) 2101414
Vinogradov A., Kruml T., Heczko M., Mazánová V., Linderov M.: Kinetics of cyclically-induced mechanical twinning in gamma-TiAl unveiled by a combination of acoustic emission, neutron diffraction and electron microscopy. Acta Mater. 212 (2021) 116921
Sklenička V., Kvapilová M., Svobodová M., Dvořák J., Král P., Kuchařová K., Čmakal J.: Aplikace empirických vztahů pro predikci creepového chování a životnosti vysokoteplotních materiálů. Životnost komponent energetických zařízení 16 (2021) 107-112
Heep L., Schwalbe C., Heinze C., Dlouhý A., Rae C., Eggeler G.: Dislocation networks in gamma/gamma´-microstructures formed during selective laser melting of a Ni-base superalloy. Scr. Mater. 190 (2021) 121-125
Kořínek M., Halama R., Fojtík F., Pagáč M., Krček J., Krzikalla D., Kocich R., Kunčická L.: Monotonic Tension-Torsion Experiments and FE Modeling on Notched Specimens Produced by SLM Technology from SS316L. Materials 14 (2021) 33
2020
Sklenička V., Král P., Kuchařová K., Kvapilová M., Dvořák J.: Damage and fracture in creep of a cladding alloy Zr 1% Nb of the VVER reactor-type. Zvyšování životnosti komponent energetických zařízení v elektrárnách 15. (2020) 147-152
Svoboda J., Holec D., Popov M., Zickler G., Fischer F.: Modelling of short-range ordering kinetics in dilute multicomponent substitutional solid solutions. Philos. Mag. 2020 (2020) 1-20
Sklenička V., Král P., Dvořák J., Takizawa Y., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.: Effects of Grain Refinement and Predeformation Impact by Severe Plastic Deformation on Creep in P92 Martensitic Steel. Adv. Eng. Mater. 22 (2020) 1900448
Chlupová A., Poczklán L., Man J., Mazánová V., Heczko M., Kruml T.: Character of Fatigue Damage under Axial, Torsional and Biaxial Loading of 316L Stainless Steel. Defect Diffus. Forum 405 (2020) 264-270
Gamsjäger E., Gschoepf ., Svoboda J.: Influence of Finite Mobilities of Triple Junctions on the Grain Morphology and Kinetics of Grain Growth. Metals 10 (2020) 185
Veverková J., Bártková D., Weiser A., Dlouhý A., Babula P., Stepka P., Goldbergová M.: Effect of Ni ion release on the cells in contact with NiTi alloys. Environ Sci Pollut R 27 (2020) 7934-7942
Scheiber D., Jechtl T., Svoboda J., Fischer F., Romaner L.: On solute depletion zones along grain boundaries during segregation. Acta Mater. 182 (2020) 100-107
Bürger D., Dlouhý A., Yoshimi K., Eggeler G.: How Nanoscale Dislocation Reactions Govern Low-Temperature and High-Stress Creep of Ni-Base Single Crystal Superalloys. Crystals 10 (2020) 134
Kunčická L., Kocich R.: Correlating Structure and Electrical Properties in Rotary Swaged Al/Cu Clad Composites. Key Eng. Mater. 865 (2020) 85-90
Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kvapilová M., Svobodová M.: Effect of ultrafine-grained microstructure on creep behaviour in 304L austenitic steel. Mater. Sci. Eng. A 785 (2020) 139383
Drexler A., Siegl W., Ecker W., Tkadletz M., Kloesch G., Schnideritsch H., Mori G., Svoboda J., Fischer F.: Cycled hydrogen permeation through Armco iron - A joint experimental and modeling approach. Corros. Sci. 176 (2020) 109017
Kocich R., Kunčická L.: Special Issue: Mechanical Properties in Progressive Mechanically Processed Metallic Materials. Materials 13 (2020) 4668
Chlupová A., Šulák I., Svoboda J.: High Temperature Cyclic Plastic Response of New-Generation ODS Alloy. Metals 10 (2020) 804
Sklenička V., Kuchařová K., Svoboda M., Král P., Kvapilová M., Dvořák J.: The Creep Resistance of Short-Fibre Reinforced Metal Matrix Composites. Structural. Integr. 16 (2020) 93-99
Moravčík I., Gamanov Š., Moravčíková-Goueva L., Kováčová Z., Kitzmantel M., Neubauer E., Dlouhý I.: Influence of Ti on the Tensile Properties of the High-Strength Powder Metallurgy High Entropy Alloys. Materials 13 (2020) 578
Khalaj O., Saebnoori E., Jirková H., Chocholaty O., Kučerová L., Hajšman J., Svoboda J.: The Effect of Heat Treatment on the Tribological Properties and Room Temperature Corrosion Behavior of Fe-Cr-Al-Based OPH Alloy. Materials 13 (2020) 5465
Svoboda J., Horník V., Riedel H.: Modelling of Processing Steps of New Generation ODS Alloys. Metall. Mater. Trans. A 51 (2020) 5296-5305
Dobeš F., Dymáček P., Friák M.: Creep of Heusler-type alloy Fe-25Al-25Co. Crystals 10 (2020) 52
Fintová S., Kuběna I., Luptáková N., Jarý M., Šmíd M., Stratil L., Šiška F., Svoboda J.: Development of advanced Fe-Al-O ODS alloy microstructure and properties due to heat treatment. J. Mater. Res. 35 (2020) 2789-2797
Zhong J., Song M., Guan K., Dymáček P.: Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test. Int. J. Mech. Sci. 166 (2020) 105195
Kunčická L., Kocich R., Klečková Z.: Effects of Sintering Conditions on Structures and Properties of Sintered Tungsten Heavy Alloy. Materials 13 (2020) 2338
Sklenička V., Kuchařová K., Svoboda M., Kvapilová M., Dvořák J., Král P.: Creep behaviour of unreinforced and reinforced QE22 magnesium alloy: A comparison. Kovové materiály 58 (2020) 71-82
Sklenička V., Kuchařová K., Kvapilová M., Kloc L., Dvořák J., Král P.: High-Temperature Creep Tests of Two Creep-Resistant Materials at Constant Stress and Constant Load. Key Eng. Mater. 827 (2020) 246-251
Kunčická L., Macháčková A., Petrmichl R., Klečková Z., Marek M.: Optimizing Induction Heating of WNiCo Billets Processed via Intensive Plastic Deformation. Applied Sciences 10 (2020) 8125
Svoboda J., Shan Y., Zickler G., Kozeschnik E., Fischer F.: Local approach for coarsening of precipitates. Scr. Mater. 178 (2020) 232-235
Dymáček P., Dobeš F., Jarý M., Jirásková Y., Pizúrová N., Friák M.: Small punch testing of Fe-Al based alloys with Ti and Nb additions. IOP Conf. Ser.: Mater. Sci. Eng. 723 (2020) 012006
Svoboda J., Luptáková N., Jarý M., Dymáček P.: Influence of Hot Consolidation Conditions and Cr-Alloying on Microstructure and Creep in New-Generation ODS Alloy at 1100 °C. Materials 13 (2020) 5070
Khalaj O., Saebnoori E., Jirková H., Chocholaty O., Svoboda J.: High Temperature and Corrosion Properties of A Newly Developed Fe-Al-O Based OPH Alloy. Metals 10 (2020) 167
Bürger D., Dlouhý A., Yoshimi K., Eggeler G.: On the stress and temperature dependence of low temperature and high stress shear creep in Ni-base single crystal superalloys. Mater. Sci. Eng. A 795 (2020) 139961
Mazánová V., Heczko M., Slone C., Kuběna I., Tobiáš J., George E., Kruml T., Polák J., Mills M.: SEM & STEM Multi-scale Characterization of Fatigue Damage in CrCoNi Medium-entropy Alloy with Fully Recrystallized Microstructure. Microscopy and Microanalysis 26 (Supp (2020) 2224
Hackl K., Fischer F., Zickler G., Svoboda J.: Are Onsager's reciprocal relations necessary to apply Thermodynamic Extremal Principles? . J. Mech. Phys. Solids 135 (2020) 103780
Hackl K., Fischer F., Svoboda J.: On the treatment of non-reciprocal rate-independent kinetics via thermodynamic extremal principles. J. Mech. Phys. Solids 145 (2020) 104149
Kunčická L., Kocich R.: Effect of Swaging Temperature on Deformation Behaviour of W93Ni6Co1 tungsten Heavy Alloy. Key Eng. Mater. 865 (2020) 91-96
Král P., Blum W., Dvořák J., Yurchenko N., Stepanov N., Zherebtsov S., Kunčická L., Kvapilová M., Sklenička V.: Creep behavior of an AlTiVNbZr0.25 high entropy alloy at 1073 K. Mater. Sci. Eng. A 783 (2020) 139291
Dobeš F., Dymáček P.: Creep behavior of AJ62 Magnesium-Aluminum-Strontium alloy. J. Magnes. Alloys 8 (2020) 414-420
Kunčická L., Kocich R.: Sub-Structure and Residual Stress in Rotary Swaged Cu/Al Clad Composite Wires. Key Eng. Mater. 865 (2020) 7-12
Chlupová A., Heczko M., Obrtlík K., Dlouhý A., Kruml T.: Effect of heat-treatment on the microstructure and fatigue properties of lamellar gama-TiAl alloyed with Nb, Mo and/or C. Mater. Sci. Eng. A 786 (2020) 139427
Schneider M., George E., Manescau T., Záležák T., Hunfeld J., Dlouhý A., Eggeler G., Laplanche G.: Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy. Int. J. Plast. 124 (2020) 155-169
Bulutsuz A., Chrominski W., Huang Y., Král P., Yurci M., Lewandowska M., Langdon T.: A Comparison of Warm and Combined Warm andLow-Temperature Processing Routes for the Equal-ChannelAngular Pressing of Pure Titanium. Adv. Eng. Mater. 22 (2020) 1900698
Král P., Dvořák J., Blum W., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kunčická L., Kocich R., Kvapilová M., Svobodová M.: The Effect of Predeformation on Creep Strength of 9% Cr Steel. Materials 13 (2020) 5330
Gröger R., Vítek V., Dlouhý A.: Effective pair potential for random fcc CoCrFeMnNi alloys. Model. Simul. Mater. Sci. Eng. 28 (2020) 075006
Stratil L., Horník V., Dymáček P., Roupcová P., Svoboda J.: The Influence of Aluminum Content on Oxidation Resistance of New-Generation ODS Alloy at 1200°C. Metals 10 (2020) 1478
Kunčická L., Klečková Z.: Structure Characteristics Affected by Material Plastic Flow in Twist Channel Angular Pressed Al/Cu Clad Composites. Materials 13(18) (2020) 4161
Kunčická L., Macháčková A., Lavery N., Kocich R., Cullen J., Hlaváč L.: Effect of thermomechanical processing via rotary swaging on properties and residual stress within tungsten heavy alloy. International Journal of Refractory Metals and Hard Materials 87 (2020) 105120
Svoboda J., Kunčická L., Luptáková N., Weiser A., Dymáček P.: Fundamental Improvement of Creep Resistance of New-Generation Nano-Oxide Strengthened Alloys via Hot Rotary Swaging Consolidation. Materials 13 (2020) 5217
2019
Weiser A., Buršíková V., Jarý M., Dymáček P., Dugáček J., Frenzel J., Čermák J., Dlouhý A.: Strength of hydrogen-free and hydrogen-doped Ni50Ti50 shape memory platelets . Scr. Mater. 162 (2019) 151-155
Mazánová V., Heczko M., Škorík V., Chlupová A., Polák J., Kruml T.: Microstructure and martensitic transformation in 316L austenitic steel during multiaxial low cycle fatigue at room temperature. Mater. Sci. Eng. A 767 (2019) 138407
Dvořák J., Sklenička V., Král P., Kvapilová M., Svobodová M., Šifner J., Koula V.: Detekce poruch pomocí akustické emise (AE) v podmínkách vysokoteplotního creepu. Zvyšování životnosti komponent energetických zařízení v elektrárnách 14 (2019) 75-80
Málek J., Zýka J., Lukáč F., Čížek J., Kunčická L., Kocich R.: Microstructure and Mechanical Properties of Sintered and Heat-Treated HfNbTaTiZr High Entropy Alloy. Metals 9(12) (2019) 1324
Kvapilová M., Dvořák J., Král P., Hrbáček K., Sklenička V.: Creep behaviour and life assessment of a cast nickel - base superalloy MAR - M247. High Temp. Mater. Proc. 38 (2019) 590-600
Luptáková N., Dymáček P., Jarý M., Záležák T.: Failure analysis of a gripping assembly loaded at temperatures above 1000 °C. Eng. Fail. Anal. 96 (2019) 384-393
Kvapilová M., Sklenička V., Král P., Dvořák J.: High Temperature Creep Properties of Cast Cobalt-Based Superalloys: A Comparison. Procedia Struct. Integr. 8 (2019) 39-44
Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Quasi-Stationary Strength of ECAP-Processed Cu-Zr at 0.5 Tm. Metals 9 (2019) 1149
Svoboda J., Ecker W., Razumovskiy V., Zickler G., Fischer F.: Kinetics of interaction of impurity interstitials with dislocations revisited. Prog. Mater. Sci. 101 (2019) 172-206
Kunčická L., Kocich R., Ryukhtin V., Cullen J., Lavery N.: Study of structure of naturally aged aluminium after twist channel angular pressing. Mater. Character. 152 (2019) 94-100
Král P., Kvapilová M., Sklenička V., Zýka J., Čmakal J., Hrbáček K.: Microstructure and damage processes in a nickel-based alloy exposed to molten glass. Procedia Struct. Integr. 23 (2019) 287-292
Schneider M., George E., Manescau T., Záležák T., Hunfeld J., Dlouhý A., Eggeler G., Laplanche G.: Benchmark dataset of the effect of grain size on strength in the single-phase FCC CrCoNi medium entropy alloy. Data in Brief 27 (2019) 104592
Dobeš F., Dymáček P., Hasegawa M., Iwashita M.: High-temperature creep of a CoNiCrAlY bond coat alloy. Mater. Sci. Eng. A 759 (2019) 272-277
Král P., Dvořák J., Sklenička V., Langdon T.: The Characteristics of Creep in Metallic Materials Processed by Severe Plastic Deformation. Mater. Trans. 60 (2019) 1506-1517
Svoboda J., Shan Y., Kozeschnik E., Fischer F.: Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates. Scr. Mater. 168 (2019) 81 -85
Dymáček P., Dobeš F., Andrés D.: Notch sensitivity of Sanicro 25 in small punch creep test. Theor. Appl. Fract. Mech. 100 (2019) 383-389
Kloc L., Sklenička V., Dymáček P.: Transient Effects in Creep of Sanicro 25 Austenitic Steel and Their Modelling. Metals 9 (2019) 245
Horst O., Ruttert B., Bürger D., Heep L., Wang H., Dlouhý A., Theisen W., Eggeler G.: On the rejuvenation of crept Ni-Base single crystal superalloys (SX) by hot isostatic pressing (HIP). Mater. Sci. Eng. A 758 (2019) 202-214
Kunčická L., Kocich R., Dvořák K., Macháčková A.: Rotary swaged laminated Cu-Al composites: Effect of structure on residual stress and mechanical and electric properties. Mater. Sci. Eng. A 742 (2019) 743-750
Dymáček P., Svoboda J., Jirková H., Stratil L., Horník V.: Microstructure evolution and creep strength of new-generation oxide dispersion strengthened alloys with high volume fraction of nano-oxides. Procedia Struct. Integr. 17 (2019) 427-433
Dobeš F., Dymáček P., Komazaki S., Li Y.: Towards the development of a universal formula for conversion of Small Punch data to Conventional Creep data. Proc. 10th Japan-China Symp. High Temp. Strength of Mater. - (2019) 370-373
Dobeš F., Dymáček P., Friák M.: The Influence of Niobium Additions on Creep Resistance of Fe-27 at. % Al Alloys. Metals 9 (2019) 739
Kunčická L., Král P., Dvořák J., Kocich R.: WE43 BIOCOMPATIBLE ALLOY AFTER SEVERE PLASTIC DEFORMATION: STRUCTURE CHARACTERIZATION. METAL 2019 Conf. Proc. 1 (2019) 1284-1290
Hasegawa M., Iwashita M., Kubota Y., Dymáček P., Dobeš F.: Microstructure evolution under high temperature deformation of CoNiCrAlY bond coat alloy. Mater. Sci. Eng. A 756 (2019) 237-247
Heczko M., Esser B., Gröger R., Feng L., Mazánová V., Wang Y., Mills M.: Structure, Morphology and Coarsening Behavior of MX (NbC) Nanoprecipitates in Fe-Ni-Cr Based Alloys. Microscopy and Microanalysis 25 (2019) 2612-2613
Dymáček P., Li Y., Dobeš F., Stevens P.: New approach to determine uniaxial creep properties from small punch creep curves. Mater. at High Temp. 36 (2019) 157-164
Dymáček P., Dobeš F., Jirásková Y., Pizúrová N., Friák M.: Tensile, creep and fracture testing of prospective Fe-Al-based alloys using miniature specimens. Theor. Appl. Fract. Mech. 99 (2019) 18-26
Kunčická L., Král P., Dvořák J., Kocich R.: Texture Evolution in Biocompatible Mg-Y-Re Alloy After Friction Stir Processing. Metals 9(11) (2019) 1181
Watanabe K., Ashida M., Masuda T., Král P., Takizawa Y., Yumoto M., Otagiri Y., Sklenička V., Hanawa T., Horita Z.: Production of Superplastic Ti6Al7Nb Alloy Using High-Pressure Sliding Process. Mater. Trans. 60 (2019) 1785-1791
Poczklán L., Mazánová V., Gamanov Š., Kruml T.: Fatigue crack growth rate in axial, torsional and multiaxial mode in 316L austenitic steel. Procedia Struct. Integr. 23 (2019) 269-274
Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Strain Rate Contribution due to Dynamic Recovery of Ultrafine-Grained Cu-Zr as Evidenced by Load Reductions during Quasi-Stationary Deformation at 0.5 Tm. Metals 9 (2019) 1150
Kamarád J., Friák M., Kastil J., Schneeweiss O., Šob M., Dlouhý A.: Effect of high pressure on magnetic properties of CrMnFeCoNi high entropy alloy. J. Magn. Magn. Mater. 487 (2019) 165333
Hackl K., Khan A., Fischer F., Svoboda J.: Influence of bulk energy and triple junction mobility on interface kinetics - A tool for interpretation of experiments. Acta Mater. 174 (2019) 310-318
Olina A., Píška M., Petrenec M., Hervoches C., Beran P., Pechoušek J., Král P.: Assessment of Retained Austenite in Fine Grained Inductive Heat Treated Spring Steel. Materials 12 (2019) 4063
Kunčická L., Macháčková A., Krátká L., Kocich R.: Analysis of Deformation Behaviour and Residual Stress in Rotary Swaged Cu/Al Clad Composite Wires. Materials 12 (2019) 3462
Dymáček P., Bártková D., Horník V., Stratil L., Mašek B., Svoboda J.: New Generation of ODS Alloys. Key Eng. Mater. 810 (2019) 113-118
Svoboda J., Riedel H.: Modeling of spontaneous transformation of nitrides to Z phase accounting for stress relaxation by diffusion and interface activity. Comp. Mater. Sci. 161 (2019) 24-34
Sklenička V., Kuchařová K., Svoboda M., Kvapilová M., Král P., Dvořák J.: Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations. Int. J. Pres. Ves. Pip. 178 (2019) 104000
Král P., Staněk J., Kunčická L., Seitl F., Petrich L., Schmidt V., Beneš V., Sklenička V.: Microstructure changes in HPT-processed copper occurring at room temperature. Mater. Character. 151 (2019) 602-611
2018
Dobeš F., Dymáček P., Friák M.: Small punch creep of Fe-Al-Cr alloy with Ce addition and its relation to uniaxial creep tests. Kovové materiály 56 (2018) 205-212
Blum W., Dvořák J., Král P., Sklenička V.: Dynamic grain coarsening in creep of pure Cu at 0.42Tm after predeformation by ECAP. Mater. Sci. Eng. A 731 (2018) 520-529
Kvapilová M., Podhorná B., Dvořák J., Král P., Zýka J., Hrbáček K., Sklenička V.: Creep Damage Mechanisms in Cast Cobalt Superalloys for Applications in Glass Industry. Key Eng. Mater. 774 (2018) 173-178
Dobeš F., Dymáček P., Friák M.: Force-to-Stress Conversion Methods in Small Punch Testing Exemplified by Creep Results of Fe-Al Alloy with Chromium and Cerium Additions. IOP Conf. Ser.: Mater. Sci. Eng. 461 (2018) 012017
Kocich R., Kunčická L., Král P., Strunz P.: Characterization of innovative rotary swaged Cu-Al clad composite wire conductors. Mater. & Design 160 (2018) 828-835
Válková L., Ševčíková J., Pávková Goldbergová M., Weiser A., Dlouhý A.: Osteoarthritic process modifies expression response to NiTi alloy presence. J. Mater. Sci.: Mater. in Medicine 29 (2018) 146
Svoboda J., Horník V., Stratil L., Hadraba H., Mašek B., Khalaj O., Jirková H.: Microstructure Evolution in ODS Alloys with a High-Volume Fraction of Nano Oxides. Metals 8 (2018) 1079
Dvořák J., Král P., Kvapilová M., Hrbáček K., Sklenička V.: HIGH - TEMPERATURE CREEP BEHAVIOUR OF CAST COBALT-BASE SUPERALLOYS. METAL 2018 Conf. Proc. 2018 (2018) 530-535
Holmström S., Li Y., Dymáček P., Vacchieri E., Jeffs S., Lancaster R., Omacht D., Kuboň Z., Anelli E., Rantala J., Tonti A., Komazaki S., Naveena ., Bruchhausen M., Hurst R., Hähner P., Richardson M., Andrés D.: Creep strength and minimum strain rate estimation from Small Punch Creep tests. Mater. Sci. Eng. A 731 (2018) 161-172
Heczko M., Esser B., Smith T., Beran P., Mazánová V., McComb D., Kruml T., Polák J., Mills M.: Atomic resolution characterization of strengthening nanoparticles in a new high-temperature-capable 43Fe-25Ni-22.5Cr austenitic stainless steel. Mater. Sci. Eng. A 719 (2018) 49-60
Wu X., Dlouhý A., Eggeler Y., Spiecker E., Kostka A., Somsen C., Eggeler G.: On the nucleation of planar faults during low temperature and high stress creep of single crystal Ni-base superalloys. Acta Mater. 144 (2018) 642-655
Mazánová V., Polák J.: Initiation and growth of short fatigue cracks in austenitic Sanicro 25 steel. Fatigue Fract. Eng. Mater. Struct. 41 (2018) 1529-1545
Král P., Sklenička V., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.: Microstructure and creep behaviour of P92 steel after HPT. Mater. Sci. Eng. A 723 (2018) 287-295
Fischer F., Zickler G., Svoboda J.: Stress-strain analysis of the antiplane shear problem for an infinite cylindrical inclusion with eigenstrain an addendum to Arch. Appl. Mech. 2018. Arch. Appl. Mech. 88 (2018) 1209-1211
Sklenička V., Kvapilová M., Král P., Dvořák J., Svoboda M., Podhorná B., Zýka J., Hrbáček K., Joch A.: Degradation processes in high-temperature creep of cast cobalt-based superalloys. Mater. Character. 144 (2018) 479-489
Svoboda J., Zickler G., Fischer F.: An innovative concept for interstitial diffusion in stressed crystals. Int. J. Solids Struct. 134 (2018) 173-180
Kloc L., Sklenička V., Dymáček P., Plešek J.: New creep constitutive equation for finite element modelling including transient effects. Mech. Mater. 119 (2018) 49-55
Král P., Dvořák J., Sklenička V., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.: The Effect of Ultrafine-Grained Microstructure on Creep Behaviour of 9% Cr Steel. Materials 11 (2018) 787
Svoboda J., Fischer F.: Anisotropy of interstitial diffusion in bcc-crystals due to stress-induced unequal occupancies of different types of sites. Int. J. Solids Struct. 152-153 (2018) 66-70
Khalaj O., Jirková H., Mašek B., Hassasroudsari P., Studecký T., Svoboda J.: Using thermomechanical treatments to improve the grain growth of new-generation ODS alloys. Mater. Technol. 52 (2018) 475-482
Šiška F., Stratil L., Hadraba H., Fintová S., Kuběna I., Horník V., Husák R., Bártková D., Záležák T.: Strengthening mechanisms of different oxide particles in 9Cr ODS steel at high temperatures. Mater. Sci. Eng. A 732 (2018) 112-119
Scheiber D., Romaner L., Fischer F., Svoboda J.: Kinetics of grain boundary segregation in multicomponent systems - The example of a Mo-C-B-O system. Scr. Mater. 150 (2018) 110-114
Sklenička V., Kuchařová K., Kvapilová M., Kloc L., Dvořák J., Král P.: Interrelationship between Creep Deformation and Damage for Advanced Creep-Resistant Steels. Key Eng. Mater. 774 (2018) 119-124
Gamsjäger E., Ogris D., Svoboda J.: Kinetics of Grain Boundary Networks Controlled by Triple Junction and Grain Boundary Mobility. Metals 8 (2018) 977
Polák J., Mazánová V., Petráš R., Heczko M.: Early damage and fatigue crack initiation at ambient and elevated temperatures in heat resistant austenitic steel. MATEC Web Conf. 165 (2018) 04008
Záležák T., Šiška F., Stratil L., Fintová S., Horník V., Bártková D., Husák R., Svoboda J., Dlouhý A.: An integration of 3D discrete dislocation dynamics with numerical tensile testing. Acta Phys. Pol. A 134 (2018) 777-780
Mazánová V., Heczko M., Polák J.: Fatigue crack initiation and growth in 43Fe-25Ni-22.5Cr austenitic steel at a temperature of 700°C. Int. J. Fatigue 114 (2018) 11-21
Sklenička V., Kuchařová K., Svobodová M., Král P., Kvapilová M., Dvořák J.: The effect of a prior short-term ageing on mechanical and creep properties of P92 steel. Mater. Character. 136 (2018) 388-397
Eggeler G., Wieczorek ., Fox F., Berglund S., Bürger D., Dlouhý A., Wollgramm P., Neuking K., Schreuer J., Jácome L., Gao S., Hartmaier A., Laplanche G.: On Shear Testing of Single Crystal Ni-Base Superalloys. Metall. Mater. Trans. A 49A (2018) 3951-3962
Dymáček P., Jarý M., Dobeš F., Kloc L.: Tensile and Creep Testing of Sanicro 25 Using Miniature Specimens. Materials 11 (2018) 142
Sklenička V., Kuchařová K., Svoboda M.: Creep behaviour and microstructure evolution of advanced creep-resistant 9%Cr martensitic steels under cyclic thermal loading. Kovové materiály 56 (2018) 1-13
Ševčíková J., Bártková D., Goldbergová M., Kuběnová M., Čermák J., Frenzel J., Weiser A., Dlouhý A.: On the Ni-Ion release rate from surfaces of binary NiTi shape memory alloys. Appl. Surf. Sci. 427 (2018) 434-443
Fischer F., Zickler G., Svoboda J.: Elastic stress-strain analysis of an infinite cylindrical inclusion with eigenstrain. Arch. Appl. Mech. 88 (2018) 453-460
Dobeš F., Hadraba H., Chlup Z., Dlouhý A., Vilémová M., Matějíček J.: Compressive creep behavior of an oxide-dispersion-strengthened CoCrFeMnNi high-entropy alloy. Mater. Sci. Eng. A 732 (2018) 99-104
Svoboda J., Fischer F.: Influence of accounting for translationa lmotion of grains on grain growth kinetics and size distribution. Scr. Mater. 146 (2018) 255-259
Kloc L., Dymáček P., Sklenička V.: High temperature creep of Sanicro 25 austenitic steel at low stresses. Mater. Sci. Eng. A 722 (2018) 88-92
2017
Hadraba H., Chlup Z., Dlouhý A., Dobeš F., Roupcová P., Vilémová M., Matějíček J.: Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy. Mater. Sci. Eng. A 689 (2017) 252-256
Dobeš F., Dymáček P.: Estimation of Anisotropy of Creep Properties in Al and Mg Alloys by Means of Small Punch Test. Key Eng. Mater. 734 (2017) 137-143
Betekhtin V., Kadomtsev A., Narykova M., Amosová O., Sklenička V.: Defect Structure and Mechanical Stability of Microcrystalline Titanium . Technical Phys. Lett. 43 (2017) 38-44
Schneeweiss O., Friák M., Dudová M., Holec D., Šob M., Kriegner D., Holý V., Beran P., George E., Neugebauer J., Dlouhý A.: Magnetic properties of the CrMnFeCoNi high-entropy alloy. Phys. Rev. B 96 (2017) 014437
Král P., Sklenička V., Kuchařová K., Svobodová M., Kvapilová M., Dvořák J.: Development of Creep Damage in Similar Weld Joints of P92 Steel Pipe. Solid State Phenom. 270 (2017) 162-167
Dymáček P., Dobeš F., Kloc L.: Small Punch Testing of Sanicro 25 Steel and its Correlation with Uniaxial Tests. Key Engineering Materials. Key Eng. Mater. 734 (2017) 70-76
Záležák T., Šiška F., Stratil L., Luptáková N., Šmíd M., Bártková D., Svoboda J., Dlouhý A.: A Numerical Analysis of Deformation Processes in Oxide Dispersion-Strengthened Materials - Influence of Dislocation-Particle Interactions. Solid State Phenom. 258 (2017) 106-109
Hackl K., Fischer F., Svoboda J.: A variational approach to the modelling of grooving in a three-dimensional setting. Acta Mater. 129 (2017) 331-342
Svoboda J., Fischer F., Kozeschnik E.: Thermodynamic modelling of irreversible processes. EMU Notes Mineral. 16 (2017) 181-214
Sklenička V., Kuchařová K., Král P., Kvapilová M., Dvořák J.: Applicability of empirical formulas and fractography for assessment of creep life and creep fracture modes of tempered martensitic 9%Cr steel. Kovové materiály 55 (2017) 69-80
Polák J., Mazánová V., Heczko M., Kuběna I., Man J.: Profiles of persistent slip markings and internal structure of underlying persistent slip bands. Fatigue Fract. Eng. Mater. Struct. 40 (2017) 1101-1116
Takizawa Y., Kajita T., Král P., Masuda T., Watanabe K., Yumoto M., Otagiri Y., Sklenička V., Horita Z.: Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS). Mater. Sci. Eng. A 682 (2017) 603-612
Fischer F., Zickler G., Svoboda J.: Calibration of phase field parameters demonstrated on kinetics of a shrinking single grain. Philos. Mag. Lett. 97 (2017) 92-100
Král P., Dvořák J., Kvapilová M., Blum W., Sklenička V.: The influence of long-term annealing at room temperature on creep behaviour of ECAP-processed copper. Mater. Lett. 188 (2017) 235-238
Sklenička V., Kuchařová K., Kvapilová M., Svoboda M., Král P., Dvořák J.: Creep properties of simulated heat-affected zone of HR3C austenitic steel. Mater. Character. 128 (2017) 238-247
Sklenička V., Kuchařová K., Dvořák J., Kvapilová M., Král P.: Creep Damage Tolerance Factor delta of Selected Creep-Resistant Steels. Key Eng. Mater. 754 (2017) 47-50
Blum W., Král P., Dvořák J., Petrenec M., Eisenlohr P., Sklenička V.: In situ study of thermally activated flow and dynamic restoration of ultrafine-grained pure Cu at 373 K. J. Mater. Res. 32 (2017) 1-8
Mazánová V., Polák J., Škorík V., Kruml T.: Multiaxial elastoplastic cyclic loading of austenitic 316L steel. Frattura ed Integrita Strutturale 11 (2017) 162-169
Šiška F., Stratil L., Hadraba H., Fintová S., Kuběna I., Záležák T., Bártková D.: High temperature deformation mechanisms in the 14% Cr ODS alloy. Mater. Sci. Eng. A 689 (2017) 34-39
Král P., Blum W., Dvořák J., Eisenlohr P., Petrenec M., Sklenička V.: Dynamic restoration of severely predeformed, ultrafine-grained pure Cu at 373 K observed in situ. Mater. Character. 134 (2017) 329-334
Rebhan B., Svoboda J., Panholzer M.: A thermodynamic study of voiding phenomena in Cu-Cu thermo-compression wafer bonding. Microsys. Technol. 1 (2017) 1-8
Sklenička V., Kuchařová K., Kvapilová M., Král P., Dvořák J.: Combination of Experiments and Continuum Damage Mechanics Approach for Prediction of Creep Fracture in an Advanced 9%Cr Steel. Solid State Phenom. 258 (2017) 591-594
Dymáček P., Dobeš F., Kloc L.: Determination of Mechanical Properties of Metallic Materials from Very Small Volumes by Means of Small Punch Test. Key Eng. Mater. 741 (2017) 116-121
Heczko M., Esser B., Smith T., Beran P., Mazánová V., Kruml T., Polák J., Mills M.: On the origin of extraordinary cyclic strengthening of the austenitic stainless steel Sanicro 25 during fatigue at 700 C. J. Mater. Res. 32 (2017) 4342-4353
Andrés D., Dymáček P., Lacalle R., Alvarez J.: Influence of the Upper Die and of the Indenter Material on the Time to Rupture of Small Punch Creep Tests. Key Eng. Mater. 734 (2017) 119-127
Polák J., Mazánová V., Heczko M., Petráš R., Kuběna I., Casalena L., Man J.: The role of extrusions and intrusions in fatigue crack initiation. Eng. Fract. Mech. 185 (2017) 46-60
Fischer F., Zickler G., Svoboda J.: Modelling of grain refinement driven by negative grain boundary energy. Philos. Mag. 97 (2017) 1963-1977
Mazánová V., Heczko M., Kuběna I., Polák J.: Surface Relief Formation in Relation to the Underlying Dislocation Arrangement. Solid State Phenom. 258 (2017) 526-529
Betekhtin V., Sklenička V., Kadomtsev A., Kolobov Y., Narykova M.: Defect Structure and Thermomechanical Stability of Nano- and Microcrystalline Titanium Obtained by Different Methods of Intense Plastic Deformation. Physics of the Solids 59 (2017) 960-966
Svoboda J., Fischer F.: Incorporation of vacancy generation/annihilation into reactive diffusion concept - Prediction of possible Kirkendall porosity. Comp. Mater. Sci. 127 (2017) 136-140
Záležák T., Svoboda J., Dlouhý A.: High temperature dislocation processes in precipitation hardened crystals investigated by a 3D discrete dislocation dynamics. Int. J. Plast. 97 (2017) 1-23
Mazánová V., Škorík V., Kruml T., Polák J.: Cyclic response and early damage evolution in multiaxial cyclic loading of 316L austenitic steel. Int. J. Fatigue 100 (2017) 466-476
Čelko L., Jech D., Dvořák J., Šulák I., Klakurková L., Obrtlík K.: Durability of Amorphous and Crystalline BMAS Thermal Barrier Coatings Produced by Plasma Spraying. Solid State Phenom. 258 (2017) 383-386
Stratil L., Šiška F., Hadraba H., Bártková D., Fintová S., Puchý V.: Fracture behaviour of the ODS steels prepared by internal oxidation. Fusion Eng. & Design 124 (2017) 1108-1111
Bártková D., Šmíd M., Mašek B., Svoboda J., Šiška F.: Kinetic study of static recrystallization in an Fe-Al-O ultra-fine-grained nanocomposite. Philos. Mag. Lett. 97 (2017) 379-385
Karol M., Chlupová A., Mazánová V., Kruml T.: Fatigue crack initiation and growth in 316L steel in torsional cyclic loading. Eng. Mech. 23 (2017) 434-437
2016
Křižík P., Balog M., Nosko M., Riglos M., Dvořák J., Bajana O.: Ultrafine-grained Al composites reinforced with in-situ Al3Ti filaments. Mater. Sci. Eng. A 657 (2016) 6-14
Yardley V., Povstugar I., Choi P., Raabe D., Parsa A., Kostka A., Somsen C., Dlouhý A., Neukin K., George E., Eggeler G.: On Local Phase Equilibria and the Appearance of Nanoparticles in the Microstructure of Single-Crystal Ni-Base Superalloys. Adv. Eng. Mater. 18 (2016) 1556-1567
Dobeš F., Pešička J., Kratochvíl P.: Creep of Fe3Al-based alloys with vanadium and carbon additions. Intermetallics 74 (2016) 60-64
Šiška F., Stratil L., Šmíd M., Luptáková N., Záležák T., Bártková D.: Deformation and fracture behavior of the P91 martensitic steel at high temperatures. Mater. Sci. Eng. A 672 (2016) 1-6
Kočích R., Kunčická L., Král P., Lowe T.: Texture, deformation twinning and hardening in a newly developed Mg-Dy-Al-Zn-Zr alloy processed with high pressure torsion. Mater. & Design 90 (2016) 1092-1099
Fischer F., Hackl K., Svoboda J.: Improved thermodynamic treatment of vacancy-mediated diffusion and creep. Acta Mater. 108 (2016) 347-354
Andrés D., Dymáček P.: Study of the upper die clamping conditions in the small punch test. Theor. Appl. Fract. Mech. 86 (2016) 117-123
Spusta T., Svoboda J., Maca K.: Study of pore closure during pressure-less sintering of advanced oxide ceramics. Acta Mater. 155 (2016) 347-353
Sklenička V., Kuchařová K., Kvapilová M., Král P., Dvořák J.: Creep Damage and Fracture in Advanced Tungsten Modified 9%Cr Ferritic Steel. Key Eng. Mater. 713 (2016) 183-186
Riedl H., Svoboda J.: A model for strain hardening, recovery, recrystallization and grain growth with applications to forming processes of nickel base alloys. Mater. Sci. Eng. A 665 (2016) 175-183
Svoboda J., Fischer F.: A self-consistent model for thermodynamics of multicomponent. Scr. Mater. 126 (2016) 154-157
Kunčická L., Kočích R., Král P., Pohludka M., Marek M.: Effect of strain path on severely deformed aluminium. Mater. Lett. 180 (2016) 280-283
Polák J., Mazánová V., Kuběna I., Heczko M., Man J.: Surface Relief and Internal Structure in Fatigued Stainless Sanicro 25 Steel. Metall. Mater. Trans. A 47A (2016) 1907-1911
Betekhtin V., Kolobov Y., Golosová O., Dvořák J., Sklenička V., Kardashev B., Narykova M., Ivanov M.: Elastic modulus, microplastic properties and durability of titanium alloys for biomedical applications. Rev. Adv. Mater. Sci 45 (2016) 42-51
Mašek B., Khalaj O., Nový Z., Kubina T., Jirková H., Svoboda J., Štádler C.: Behaviour of new ODS alloys under single and multiple deformation. Mater. Technol. 50 (2016) 891-898
Otto F., Dlouhý A., Pradeep K., Kuběnová M., Raabe D., Eggeler G., George E.: Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures. Acta Mater. 112 (2016) 40-52
Král P., Dvořák J., Jäger A., Kvapilová M., Horita Z., Sklenička V.: Creep properties of aluminium processed by ECAP. Kovové materiály 54 (2016) 441-451
Wu X., Wollgramm P., Somsen C., Dlouhý A., Kostka A., Eggeler G.: Double minimum creep of single crystal Ni-base superalloys. Acta Mater. 112 (2016) 242-260
Dobeš F., Vodičková V., Veselý J., Kratochvíl P.: The Effect of Carbon Additions on the Creep Resistance of Fe-25Al-5Zr Alloy. Metall. Mater. Trans. A 47 (2016) 6070-6076
Uhlar R., Svoboda J., Jeřábek P., Povoden-Karadeniz E., Habler G.: Interlayer growth kinetics of a binary solid-solution based on the thermodynamic extremal principle: Application to the formation of spinelat periclase-corundum contacts. Amer. J. Sci. 316 (2016) 309-328
Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Effects of Grain Refinement by ECAP on the Deformation Resistance of Al Interpreted in Terms of Boundary-Mediated Processes. J. Mater. Sci. Technol. 32 (2016) 1309-1320
Svoboda J., Shan Y., Kozeschnik E., Fischer F.: A thermokinetic model for Mg-Si couple formation in Al-Mg-Si alloys. Model. Simul. Mater. Sci. Eng. 24 (2016) 1-16
Král P., Dvořák J., Blum W., Kudryavtsev E., Zherebtsov S., Salischev G., Kvapilová M., Sklenička V.: Creep study of mechanisms involved in low-temperature superplasticity of UFG Ti-6Al-4V processed by SPD. Mater. Character. 116 (2016) 84-90
Dymáček P.: Recent developments in small punch testing: Applications at elevated temperatures. Theor. Appl. Fract. Mech. 86 (2016) 25-33
Svoboda J., Fratzl P., Zickler G., Fischer F.: A new treatment of transient grain growth. Acta Mater. 115 (2016) 442-447
Dobeš F., Dymáček P.: Fracture-based correlation of uniaxial and small punch creep data. Theor. Appl. Fract. Mech. 86 (2016) 34-38
Sklenička V., Kuchařová K., Svobodová M., Kvapilová M., Král P., Horváth L.: Creep properties in similar weld joint of a thick-walled P92 steel pipe. Mater. Character. 119 (2016) 1-12
Fischer F., Svoboda J., Antretter T., Kozeschnik E.: Stress relaxation by power-law creep during growth of a misfitting precipitate. Int. J. Solids Struct. 96 (2016) 74-80
Luptáková N., Dymáček P., Pešlová F., Jurkovič Z., Barborák O., Stodola J.: Impact of residual elements on zinc quality in the production of zinc oxide. Metalurgija 55 (2016) 407-410
Kočích R., Kunčická L., Král L., Macháčková A.: Sub-structure and mechanical properties of twist channel angular pressed aluminium. Mater. Character. 119 (2016) 75-83
Svoboda J., Fischer F., Riedl H., Kozeschnik E.: Precipitate growth in multi-component systems with stress relaxation by diffusion and creep. Int. J. Plast. 82 (2016) 112-126
2015
Parsa A., Wollgramm P., Buck H., Somsen C., Kostka A., Povstugar I., Choi P., Raabe D., Dlouhý A., Müller J., Spiecker E., Demtroder K., Schreuer J., Neukin K., Eggeler G.: Advanced Scale Bridging Microstructure Analysis of Single Crystal Ni-Base Superalloys. Adv. Eng. Mater. 17 (2015) 216-230
Kvapilová M., Kuchařová K., Kloc L., Sklenička V.: Creep Behaviour of a Zr-1 wt% Nb Alloy at Elevated Temperatures. Acta Phys. Pol. A 128 (2015) 548-551
Svoboda J., Shan Y., Fischer F.: A new self-consistent model for thermodynamics of binary solutions. Scr. Mater. 108 (2015) 27-30
Polák J., Petráš R., Mazánová V.: Basic mechanisms leading to fatigue failure of structural materials. Trans. Indian Inst. Metals 1 (2015) 1-6
Ženíšek J., Kozeschnik E., Svoboda J., Fischer F.: Modelling the role of compositional fluctuations in nucleation kinetics. Acta Mater. 91 (2015) 365-376
Luptáková N., Ballóková B., Dymáček P.: Compressive creep testing of composites on the base of MoSi2 - SiC nanoparticles. Manufact. Technol. 15 (2015) 377-380
Votava J., Luptáková N., Kumbál V., Polcar A.: Minimizing abrasive-erosive wear of sugar beet harvesters. Listy cukrovarnické a řepařské 131 (2015) 284-289
Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Correct Interpretation of Creep Rates: A Case Study of Cu. J. Mater. Sci. Technol. 31 (2015) 1065-1068
Dobeš F., Kratochvíl P., Pešička J., Vodičková V.: Microstructure and Creep Behavior of Fe-27Al-1Nb Alloys with Added Carbon. Metall. Mater. Trans. A 46 (2015) 1580-1587
Parsa A., Wollgramm P., Buck H., Kostka A., Somsen C., Dlouhý A., Eggeler G.: Ledges and grooves at gama/gama´ interfaces of single crystal superalloys. Acta Mater. 90 (2015) 105-117
Betekhtin V., Dvořák J., Kadomtsev A., Kardashev B., Narykova M., Raab G., Sklenička V., Faizová S.: Durability and static strength of microcrystalline titanium VT1-0 obtained by equal-channel angular pressing. Technical Phys. Lett. 41 (2015) 80-82
Dobeš F., Dymáček P., Besterci M.: Estimation of themechanical properties of aluminium and analuminium composite after equal channel angular pressing by means of the small punch test. Mater. Sci. Eng. A 626 (2015) 313-321
Sklenička V., Kuchařová K., Kvapilová M., Svoboda M.: Factors influencing creep resistance in discontinuously reinforced magnesium metal matrix composites. Kovové materiály 53 (2015) 221-229
Votava J., Luptáková N., Kumbál V., Polcar A.: Hard-metal Spray Application on Blade Segment of Sugar Beet Harvester Cutting Units. Listy cukrovarnické a řepařské 131 (2015) 341-346
Svoboda J., Zickler G., Kozeschnik E., Fischer F.: Kinetics of interstitial segregation in Cottrell atmospheres and grain boundaries. Philos. Mag. Lett. 95 (2015) 458-465
Kloc L.: Critical View on the Creep Modelling Procedures. Acta Phys. Pol. A 128 (2015) 540-542
Fischer F., Svoboda J.: Stress, deformation and diffusion interactions in solids - A simulation study. J. Mech. Phys. Solids 78 (2015) 427-442
Fischer F., Svoboda J., Antretter T., Kozeschnik E.: Relaxation of a precipitate misfit stress state by creep in the matrix. Int. J. Plast. 64 (2015) 164-176
Luptáková N., Pizúrová N., Roupcová P., Dymáček P.: High Temperature Degradation of Powder-Processed Ni-based Superalloy. Materials Engineering - Materialove inzinierstvo 22 (2015) 85-94
Luptáková N., Matejička L., Krečmer N.: Norbert Setting of the optimal parameters of melted glass. Adv. Military Technol. 10 (2015) 73-79
Khalaj O., Mašek B., Jirková H., Ronešová A., Svoboda J.: Investigation on new creep-and oxidation-resistant materials. Mater. Sci. Technol. 49 (2015) 645-651
Dobeš F., Kratochvíl P., Kejzlar P.: Creep of three-phase alloy Fe-30%Al-5.2%Zr. Kovové materiály 53 (2015) 127-132
Kuchařová K., Sklenička V., Kvapilová M., Svoboda M.: Creep and microstructural processes in a low-alloy 2.25%Cr1.6%W steel (ASTM Grade 23). Mater. Character. 109 (2015) 1-8
Luptáková N., Pešlová F., Kliber J.: The study and microstructure analysis of zinc and zinc oxide. Metalurgija 54 (2015) 43-46
Betekhtin V., Kolobov Y., Sklenička V., Kadomtsev A., Narykova M., Dvořák J., Golosov E., Kardashev B., Kuz menko I.: Effect of a defect structure on the static and long-term strength of submicrocrystalline VT1-0 titanium fabricated by plastic deformation during screw and lengthwise rolling. Tech. Phys. 60 (2015) 66-71
Záležák T., Dlouhý A.: 3D Discrete Dislocation Dynamics: Influence of Segment Mobility on Critical Shear Stress. Acta Phys. Pol. A 128 (2015) 654-656
2014
Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Effect of grain refinement by ECAP on creep of pure Cu. Mater. Sci. Eng. A 590 (2014) 423-432
Svoboda J., Mori G., Prethaler A., Fischer F.: Determination of trapping parameters and the chemical diffusion coefficient from hydrogen permeation experiments. Corros. Sci. 82 (2014) 93-100
Sklenička V., Král P., Dvořák J., Kvapilová M., Svoboda M.: Microstructure evolution and creep behavior in ECAP processed metallic materials. Mater. Sci. Forum 783-786 (2014) 2689-2694
Fischer F., Svoboda J.: Diffusion of elements and vacancies in multi-component systems. Prog. Mater. Sci. 60 (2014) 338-367
Luptáková N., Král P., Dymáček P.: The influence of high temperature on the microstructure and properties of a Ni-based superalloy. Powder Metall. Progr. 14 (2014) 190-198
Fischer F., Svoboda J., Petryk H.: Thermodynamic extremal principles for irreversible processes in materials science. Acta Mater. 67 (2014) 1-20
Luptáková N., Pešlová F., Stodola J.: Impact of residual of elements on quality of metal zinc. Perner's Contacts 9 (2014) 74-82
Jácome L., Nörtershäuser P., Somsen C., Dlouhý A., Eggeler G.: On the nature of gama´ phase cutting and its effect on high temperature and low stress creep anisotropy of Ni-base single crystal superalloys. Acta Mater. 69 (2014) 246-264
Hrabovský J., Dobeš F., Horský J.: Small Punch Tests at Oxide Scales Surface of Structural Steel and Low Silicon Steel. Oxid. Met. 82 (2014) 297-310
Holec D., Friák M., Dlouhý A., Neugebauer J.: Ab initio study of point defects in NiTi-based alloys. Phys. Rev. B 89 (2014) 014110
Svoboda J., Fischer F., Klinger L., Rabkin E.: The effect of surface contact conditions on grain boundary interdiffusion in a semi-infinite bicrystal. Philos. Mag. 94 (2014) 3398-3412
Záležák T., Dlouhý A.: 3D discrete dislocation dynamics applied to a motion of low-angle tilt boundaries. Key Eng. Mater. 592-593 (2014) 87-91
Buršík J., Král P., Svoboda M., Dvořák J., Sklenička V.: Nanoindentation and microstructural study of Cu-Co alloys after severe plastic deformation. Key Eng. Mater. 592-593 (2014) 720-723
Svoboda J., Fischer F.: Generalization of the Lifshitz-Slyozov-Wagner coarsening theory to non-dilute multi-component systems. Acta Mater. 79 (2014) 304-314
Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: What is stationary deformation of pure Cu?. J. Mater. Sci. 49 (2014) 2987-2997
Fischer F., Svoboda J.: Formation of bubbles by hydrogen attack and elastic-plastic deformation of the matrix. Int. J. Plast. 63 (2014) 110-123
Luptáková N., Anisimov E., Pešlová F.: The degradation of lining of rotary furnaces in the production of zinc oxide. Materials Engineering - Materialove inzinierstvo 21 (2014) 116-121
Svoboda J., Fischer F.: Abnormal grain growth: a non-equilibrium thermodynamic model for multi-grain binary systems. Model. Simul. Mater. Sci. Eng. 22 (2014) 015013
Luptáková N., Pešlová F.: Analysis of slag material in the production of zinc oxide. Deterioration, Dependability, Diagnostics 3 (2014) 237-242
Dobeš F., Dymáček P.: On the correlation of fracture quantities in small punch test. Key Eng. Mater. 592-593 (2014) 275-278
Besterci M., Dobeš F., Kvačkaj T., Sülleiová K., Ballóková B., Velgosová O.: HIGH TEMPERATURE MECHANICAL PROPERTIES OF Al-Al4C3 COMPOSITE. Acta Metall. Slovaca 20 (2014) 326-340
Luptáková N., Pešlová F., Stodola J.: Effect of residual elements on quality of pure zinc. Deterioration, Dependability, Diagnostics 1 (2014) 147-161
Svoboda J., Shan Y., Kozeschnik E., Fischer F.: Determination of depths of multiple traps for interstitials and their influence on diffusion kinetics. Model. Simul. Mater. Sci. Eng. 22 (2014) 065015
Kvapilová M., Dvořák J., Král P., Svoboda M., Sklenička V.: Application of the Monkman-Grant Relationship for Ultrafine-Grained Metallic Materials. Key Eng. Mater. 577-578 (2014) 137-140
Svoboda J., Stopka J., Fischer F.: Two-dimensional simulation of reactive diffusion in binary systems. Comp. Mater. Sci. 95 (2014) 309-315
Buršík J., Buršíková V., Svoboda M., Král P., Dvořák J., Sklenička V.: Microstructure and local mechanical properties of Cu-Co alloys after severe plastic deformation. Key Eng. Mater. 586 (2014) 100-103
2013
Onorbe E., Garces G., Dobeš F., Perez P., Adeva P.: High-Temperature Mechanical Behavior of Extruded Mg-Y-Zn Alloy Containing LPSO Phases. Metall. Mater. Trans. A 44A (2013) 2869-2883
Král P., Dluhoš J., Peřina V., Barták T.: 3D analysis of microstructure changes occurring during creep tests of ultra-fine grained materials. Mater. Sci. Forum 753 (2013) 46-49
Svoboda J., Shan Y., Kozeschnik E., Fischer F.: Determination of Depths of Interstitial Traps from Thermodynamic Data - A New View on Carbon Trapping and Diffusion. Model. Simul. Mater. Sci. Eng. 21 (2013) 065012
Král P., Dvořák J., Zherebtsov S., Salischev G., Kvapilová M., Sklenička V.: Effect of severe plastic deformation on creep behaviour of a Ti-6Al-4V alloy. J. Mater. Sci. 13 (2013) 4789-4795
Sklenička V., Kuchařová K., Kvapilová M., Svoboda M., Král P., Vidrich G.: Creep in an electrodeposited nickel. J. Mater. Sci. 48 (2013) 4780-4788
Svoboda J., Fischer F.: A New Computational Treatment of Reactive Diffusion in Binary Systems. Comp. Mater. Sci. 78 (2013) 39-46
Svoboda J., Fischer F., Schillinger W.: Formation of Multiple Stoichiometric Phases in Binary Systems by Combined Bulk and Grain Boundary Diffusion - Experiments and Model. Acta Mater. 61 (2013) 32-39
Besterci M., Dobeš F., Sülleiová K., Velgosová O.: Mechanical Properties of Al-Al4C3 Composite Produced by Mechanical Alloying. Univ. J. Mat. Sci. 1 (2013) 31-38
Dobeš F., Kratochvíl P.: The effect of Zr addition on creep of Fe-30 at.% Al alloys. Intermetallics 43 (2013) 142-146
Kuběnová M., Zálešák J., Čermák J., Dlouhý A.: Impact of hydrogen-assisted heat treatments on microstructure and transformation path in a Ni-rich NiTi shape memory alloy. J. Alloys Comp. 577S (2013) 287-290
Šedivý O., Beneš V., Ponížil P., Král P., Sklenička V.: Quantitative characterization of microstructure of pure copper processed by ECAP. Image Anal. & Stereol. 32 (2013) 65-75
Fischer F., Svoboda J., Kozeschnik E.: Interstitial Diffusion in Systems with Multiple Sorts of Traps. Model. Simul. Mater. Sci. Eng. 21 (2013) 025008
Dvořák J., Sklenička V., Betekhtin V., Kadomtsev A., Král P., Kvapilová M., Svoboda M.: The effect of high hydrostatic pressure on creep behaviour of pure Al and a Cu-0.2 wt% Zr alloy processed by ECAP. Mater. Sci. Eng. A 584 (2013) 103-113
Fischer F., Mori G., Svoboda J.: Modelling the Influence of Trapping on Hydrogen Permeation in Metals. Corros. Sci. 76 (2013) 382-389
Appel F., Herrmann D., Fischer F., Svoboda J., Kozeschnik E.: Role of Vacancies in Work Hardening and Fatigue of TiAl Alloys. Int. J. Plast. 42 (2013) 83-100
Hackl K., Fischer F., Klevakina K., Renner J., Svoboda J.: A Variational Approach to Grooving and Wetting. Acta Mater. 61 (2013) 1581-1591
2012
Svoboda J., Fischer F.: Modelling for hydrogen diffusion in metals with traps revisited. Acta Mater. 60 (2012) 1211-1220
Garces G., Onorbe E., Dobeš F., Perez P., Antoranz J., Adeva P.: Effect of microstructure on creep behaviour of cast Mg97Y2Zn1 (at.%) alloy. Mater. Sci. Eng. A 539 (2012) 48-55
Kratochvíl P., Dobeš F., Pešička J., Málek P., Buršík J., Vodičková V., Hanus P.: Microstructure and high temperature mechanical properties of Zr-alloyed Fe3Al-type aluminides: The effect of carbon. Mater. Sci. Eng. A 548 (2012) 175-182
Svoboda J., Fischer F., Uhlar R.: Modeling the Role of Sources and Sinks for Vacancies on the Kinetics of Diffusive Phase Transformation in Binary Systems with Several Stoichiometric Phases. Philos. Mag. Lett. 92 (2012) 67-76
Svoboda J., Fischer F., McDowell D.: Derivation of the phase field equations from the thermodynamic extremal principle. Acta Mater. 60 (2012) 396-406
Záležák T., Dlouhý A.: 3D Discrete Dislocation Dynamics Applied to Interactions between Dislocation Walls and Particles. Acta Phys. Pol. A 122 (2012) 450-452
Dobeš F., Besterci M., Ballóková B., Sülleiová K., Dymáček P.: Analysis of creep fracture in Al-Al4C3 composite after ECAP. Mater. Sci. Eng. A 532 (2012) 567-572
Fischer F., Svoboda J., Hackl K.: Modelling the Kinetics of a Triple Junction. Acta Mater. 60 (2012) 4704-4711
Manchuraju S., Kröger A., Somsen C., Dlouhý A., Eggeler G., Sarosi P., Anderson P., Mills M.: Pseudoelastic deformation and size effects during in situ transmission electron microscopy tensile testing of NiTi. Acta Mater. 60 (2012) 2770-2777
2011
Olbricht J., Yawny A., Pelegrina J., Dlouhý A., Eggeler G.: On the Stress-Induced Formation of R-phase in Ultra-Fine-Grained Ni-rich NiTi Shape Memory Alloys. Metall. Mater. Trans. A 42 (2011) 2556-2574
Frotscher M., Wu S., Simon T., Somsen C., Dlouhý A., Eggeler G.: Elementary Deformation and Damage Mechanisms During Fatigue of Pseudo-elastic Microstents. Adv. Biomat. 13 (2011) B181-B186
Kvapilová M., Kuchařová K., Sklenička V., Svoboda M., Hrbáček K.: Creep behaviour and microstructure changes of model cast Ni-Cr-W-C alloys. Procedia Eng. 10 (2011) 839-844
Svoboda J., Gamsjäger E., Fischer F., Liu Y., Kozeschnik E.: Diffusion Processes in a Migrating Interface - The Thick Interface Model. Acta Mater. 59 (2011) 4775-4786
Král P., Dvořák J., Kvapilová M., Svoboda M., Beneš V., Ponížil P., Šedivý O., Sklenička V.: Quantitative Characterization of Microstructure in Copper Processed by ECAP. Mater. Sci. Forum 667-669 (2011) 235-240
Svoboda J., Fischer F.: Modelling of the influence of the vacancy source and sink activity and the stress state on diffusion in crystalline solids. Acta Mater. 59 (2011) 1212-1219
Dymáček P.: Short term creep small punch testing of P91 and P92 steels, observations and correlations with the numerical results. Key Eng. Mater. 465 (2011) 179-182
Fischer F., Svoboda J.: Modelling of Reaction of Metallic Nanospheres with Gas. Solid State Phenom. 172-174 (2011) 1028-1037
Svoboda J., Gamsjäger E.: Modelling of Diffusive and Massive Phase Transformations in Binary Systems - Thick Interface Parametric Model. Int. J. Mater. Res. 102 (2011) 666-673
Hackl K., Fischer F., Svoboda J.: A study on the principle of maximum dissipation for coupled and non-coupled non-isothermal processes in materials. Proc. Roy. Soc. Lond. A 467 (2011) 1186-1196
Dobeš F., Kratochvíl P., Vodičková V.: The effect of carbon and silicon additions on the creep properties of Fe-40 at.% Al type alloys at elevated temperatures. Intermetallics 19 (2011) 1526-1532
Záležák T., Dlouhý A.: 3D discrete dislocation modelling of high temperature plasticity. Key Eng. Mater. 465 (2011) 115-118
Dudová M., Kuchařová K., Barták T., Bei H., George E., Somsen C., Dlouhý A.: Creep in Directionally Solidified NiAl-Mo Eutectics. Scr. Mater. 65 (2011) 699-702
Holec D., Friák M., Dlouhý A., Neugebauer J.: Ab initio study of pressure stabilized NiTi allotropes: Pressure-induced transformations and hysteresis loops. Phys. Rev. B 84 (2011) 224119
Ulrich C., Hashibon A., Svoboda J., Elsässer C., Helm D., Riedl H.: Diffusion kinetics in aluminium-gold bond contacts from first-principles density functional calculations. Acta Mater. 59 (2011) 7634-7644
Kvapilová M., Sklenička V., Dvořák J., Král P.: An Evaluation of Creep Mechanisms in Ultrafine-Grained Metals. Key Eng. Mater. 465 (2011) 382-385
Fischer F., Svoboda J.: Chemically and Mechanically Driven Creep Due to Generation and Annihilation of Vacancies with Non-ideal Sources and Sinks. Int. J. Plast. 27 (2011) 1384-1390
Besterci M., Dobeš F., Ballóková B., Sülleiová K., Kvačkaj T.: Observation of Anisotropy of Creep Fracture Using Small Punch Test for Al-Al4C3 System Produced by Equal Channel Angular Pressing. High Temp. Mater. Proc. 30 (2011) 205-210
Fischer F., Svoboda J., Appel F., Kozeschnik E.: Modelling of Excess Vacancy Annihilation at Different Types of Sinks. Acta Mater. 59 (2011) 3463-3472
Svoboda J., Fischer F.: Stress Development During Reaction of Metallic Nanospheres with Gas. Acta Mater. 59 (2011) 61-67
Svoboda J., Fischer F., Leindl M.: Transient Solute Drag in Migrating Grain Boundaries. Acta Mater. 59 (2011) 6556-6562
Svobodová M., Tůmová D., Čmakal J., Sopoušek J., Kuchařová K.: Vliv přechodových svarových spojů na životnost tlakových systémů energetických zařízení. All for Power 5 (2011) 100-102
Kočích R., Kursa M., Szurman I., Dlouhý A.: The influence of imposed strain on the development of microstructure and transformation characteristics of Ni-Ti shape memory alloys. J. Alloys Comp. 509 (2011) 2716-2722
2009
Dymáček P., Milička K.: Creep small-punch testing and its numerical simulations. Mater. Sci. Eng. A 510-511 (2009) 444-449
|
