---

Jurči P., Dlouhý I.: Cryogenic treatment of martensitic steels: microstructural fundamentals and implications for mechanical properties and wear and corrosion performance. Materials 17 (2024) 548


Drdlík D., Mařák V., Hadraba H., Chlup Z.: A way for densification of lead-free BaTiO3-based/ZrO2 laminates for energy harvesting applications prepared by electrophoretic deposition. Mater. Lett. 355 (2024) 135424

Trunec M., Šťastný P., Kaštyl J., Roupcová P., Chlup Z.: 2Y-TZP ceramics with high strength and toughness by optimizing the microstructure. J. Eur. Ceram. Soc. 44 (2024) 3258-3266

Roth J., Šulák I., Chlup Z., Fischer-Bühner J., Krupp U., Jahns K.: The dispersion-strengthening effect of TiN evoked by in situ nitridation of NiCu-based alloy 400 during gas atomization for laser powder bed fusion. Mater. Sci. Eng. A 893 (2024) 146129

---

Masaryková N., Tkadlec E., Chlup Z., Vrbský J., Brysová A., Černochová P., Izakovicová Hollá L.: Comparison of microleakage under orthodontic brackets bonded with five different adhesive systems: in vitro study. BMC Oral Health 23 (2023) 637


Čížek J., Klečka J., Babka L., Mušálek R., Hadraba H., Kondas J., Singh R., Pazderová M.: Protective Mo and Fe coatings by CS and RF-ICP for PbLi coolant environments in generation IV fission reactors. J. Thermal Spray Technol. 32 (2023) 363-374

Macková A., Havránek V., Mikšová R., Fernandes S., Matějíček J., Hadraba H., Vilémová M., Liedke M., Martan J., Vronka M., Haušild P., Butterling M., Honnerová P., Attalah A., Wagner A., Lukáč F.: Radiation damage evolution in high entropy alloys (HEAs) caused by 3-5 MeV Au and 5 MeV Cu ions in a broad range of dpa in connection to mechanical properties and internal morphology. Nucl. Mater. Energy 37 (2023) 101510

Šiška F., Stratil L., Chlup Z., Kotoulova H., Machů Z.: Poisson´s ratio reduction by geometrical patterns implemented in solid composites. MRS Commun. 13 (2023) 486-491

Hojna A., Pazderová M., Rozumová L., Vít J., Hadraba H., Stratil L., Čížek J.: Performance of Sc-Y-ODS variant of Eurofer steel in stagnant PbLi at 600°C. J. Nucl. Mater. 575 (2023) 154227

Neuberger H., Hernandez F., Rieth M., Bonnekoh C., Stratil L., Dlouhý I., Dymáček P., Müller O., Adler L., Kunert U.: Cold Spray metal powder deposition with 9 %Cr-steel applied for the HCPB First Wall fabrication: Proof of concept and options for ODS steel processing. Nucl. Mater. Energy 35 (2023) 101427

Šmíd M., Koutný D., Neumannová K., Chlup Z., Náhlík L., Jambor M.: Cyclic behaviour and microstructural evolution of metastable austenitic stainless steel 304L produced by laser powder bed fusion. Additive Manufacturing 68 (2023) 103503

Papež P., Zelený M., Friák M., Dlouhý I.: The effect of spin-polarization, atomic ordering and charge transfer on the stability of CoCrNi medium entropy alloy. Mater. Chem. Phys. 304 (2023) 127783

Janů L., Dvořáková E., Polášková K., Buchtelová M., Ryšánek P., Chlup Z., Kruml T., Galmiz O., Nečas D., Zajíčková L.: Enhanced adhesion of electrospun polycaprolactone nanofibers to plasma-modified polypropylene fabric. Polymers 15 (2023) 1686

Šiška F., Drozdenko D., Máthis K., Čížek J., Guo T., Barnett M.: Three-dimensional crystal plasticity and HR-EBSD analysis of the local stress-strain fields induced during twin propagation and thickening in magnesium alloys. J. Magnes. Alloys 11 (2023) 657-670

Fintová S., Kunz L., Chlup Z., Kuběna I., Mertová K., Hradil D., Duchek M.: Grain refinement effect on fatigue life of two grades of commercially pure titanium. Int. J. Fatigue 176 (2023) 107883

Milyutin V., Bureš R., Faberová M., Birčáková Z., Shishkin D., Roupcová P., Hadraba H., Kollar P., Fuzer J., Phuong D.: Multi-component soft magnetic alloy FeNiCoAl0.4Mo0.1Si0.4B0.1 with high frequency stability of permeability. Mater. Sci. Eng. B 293 (2023) 116485

Chlup Z., Drdlík D., Hadraba H., Ševeček O., Šiška F., Erhart J., Maca K.: Temperature effect on elastic and fracture behaviour of lead-free piezoceramic BaTiO3. J. Eur. Ceram. Soc. 43 (2023) 1509-1522

Hadzhieva Z., Cholewa-Kowalska K., Dlouhý I., Moskalewicz ., Boccaccini A.: Electrophoretic deposition (EPD) of zein/bioactive glass composite coatings doped with F and Cu on titanium for biomedical applications. Mater. Lett. 351 (2023) 135066

Schlacher J., Chlup Z., Hofer A., Bermejo R.: High-temperature fracture behaviour of layered alumina ceramics with textured microstructure. J. Eur. Ceram. Soc. 43 (2023) 2917-2927

Šťastný P., Chlup Z., Hlinican J., Kaštyl J., Trunec M.: Effect of cyclic loading on the microstructure of thin zirconia tapes. J. Eur. Ceram. Soc. 43 (2023) 4498-4505

---

Kaštyl J., Šťastný P., Chlup Z., Song L., Scasnovic E., Trunec M.: Gelcast zirconia ceramics for dental applications combining high strength and high translucency. J. Amer. Ceram. Soc. 105 (2022) 3909-3924

Šiška F., Hadraba H., Stratil L., Fintová S., Kuběna I.: Effects of grains´ morphology on strengthening mechanisms in ODM401 14Cr ODS steel at high temperatures. Mater. Sci. Eng. A 852 (2022) 143663

Jurči P., Ptačinová J., Dlouhý I.: Fracture Micro Mechanism of Cryogenically Treated Ledeburitic Tool Steel. Lecture Notes in Mechanical Engineering (2022) 67-84

Moravčík I., Zelený M., Dlouhý A., Hadraba H., Moravčíková-Goueva L., Papež P., Fikar O., Dlouhý I., Raabe D., Li Z.: Impact of interstitial elements on the stacking fault energy of an equiatomic CoCrNi medium entropy alloy: theory and experiments. Sci. Technol. Adv. Mater. 23 (2022) 376-392

Dobeš F., Hadraba H., Chlup Z., Matějíček J.: Different Types of Particle Effects in Creep Tests of CoCrFeNiMn High-Entropy Alloy. Materials 15 (2022) 7363

Chlup Z., Černý M., Strachota A., Rýglová Š., Schweigstillová J., Svítilová J., Trško L., Hadzima B.: Effect of Pyrolysis Temperature on the Behaviour of Environmentally Friendly Hybrid Basalt Fibre Reinforced Composites. Appl. Composite Mater. 29 (2022) 829-843

Novotná L., Chlup Z., Jaros J., Částková K., Drdlík D., Pospisil J., Hampl A., Koutna I., Cihlář J.: Macroporous bioceramic scaffolds based on tricalcium phosphates reinforced with silica: microstructural, mechanical, and biological evaluation. J. Asian Ceram. Soc. 10 (2022) 356-369

Tinoco Navarro H., Fintová S., Heikkita I., Herrero D., Vuoristo T., Dlouhý I., Hutař P.: Experimental and numerical study of micromechanical damage induced by MnS-based inclusions. Mater. Sci. Eng. A 856 (2022) 144009

Hadraba H., Chlup Z., Čížek J., Kuběna I.: 9Cr-1W steel strengthened by AlN and BN dispersion. J. Mater. Sci. 57 (2022) 12572-12584

---

Kotrechko S., Kozák V., Zatsarna O., Zimina G., Stetsenko N., Dlouhý I.: Incorporation of Temperature and Plastic Strain Effects into Local Approach to Fracture. Materials 14 (2021) 6224

Šiška F., Stratil L., Čížek J., Guo T., Barnett M.: Numerical analysis of twin-precipitate interactions in magnesium alloys. Acta Mater. 202 (2021) 80-87

Máthis K., Knapek M., Šiška F., Harcuba P., Ugi D., Ispánovity P., Groma I., Shin K.: On the dynamics of twinning in magnesium micropillars. Mater. & Design 203 (2021) 109563

Hanzel O., Lenčéš Z., Tatarko P., Sedlák R., Dlouhý I., Dusza J., Šajgalík P.: Preparation and Properties of Layered SiC-Graphene Composites for EDM . Materials 14 (2021) 2916

Fintová S., Trško L., Chlup Z., Pastorek F., Kajánek D., Kunz L.: Fatigue Crack Initiation Change of Cast AZ91 Magnesium Alloy from Low to Very High Cycle Fatigue Region. Materials 14 (2021) 6245

Fintová S., Dlhý P., Mertová K., Chlup Z., Duchek M., Procházka R., Hutař P.: Fatigue properties of UFG Ti grade 2 dental implant vs. conventionally tested smooth specimens. J. Mech. Behav. Biomed. Mater. 123 (2021) 104715

Šťastný P., Chlup Z., Roupcová P., Trunec M.: Thin high-strength zirconia tapes with extreme flexibility. J. Asian Ceram. Soc. 9 (2021) 964-974

Unsal H., Grasso S., Kovalčíková A., Hanzel O., Tatarková M., Dlouhý I., Tatarko P.: In-situ graphene platelets formation and its suppression during reactive spark plasma sintering of boron carbide/titanium diboride composites. J. Eur. Ceram. Soc. 41 (2021) 6281-6289

Drdlík D., Zeman D., Tofel P., Chlup Z., Hadraba H., Drdlíková K.: A comparative study of direct and indirect evaluation of piezoelectric properties of electrophoreticaly deposited (Ba, Ca) (Zr, Ti)O3 lead-free piezoceramics. Ceram. Int. 47 (2021) 2034-2042

Šťastný P., Chlup Z., Částková K., Trunec M.: High strength alumina tapes prepared by gel-tape casting method. Ceram. Int. 47 (2021) 6988-6995

Čížek J., Kovařík O., Čupera J., Kondas J., Bajer T., Šiška F., Janovská M., Seiner H.: Measurement of mechanical and fatigue properties using unified, simple-geometry specimens: Cold spray additively manufactured pure metals. Surf. Coat. Technol. 412 (2021) 126929

Taveri G., Hanzel O., Sedláček J., Toušek J., Neščaková Z., Michálek M., Dlouhý I., Hnatko M.: Consolidation of Bioglass(R) 45S5 suspension through cold isostatic pressing. Ceram. Int. 47 (2021) 4090-4096

Pokluda J., Dlouhý I., Kianicová M., Čupera J., Horníková J., Šandera P.: Temperature Dependence of Fracture Characteristics of Variously Heat-Treated Grades of Ultra-High-Strength Steel: Experimental and Modelling. Materials 14 (2021) 5875

Tatarková M., Tatarko P., Kovalčíková A., Dlouhý I., Dusza J., Šajgalík P.: Influence of hexagonal boron nitride nanosheets on phase transformation, microstructure evolution and mechanical properties of Si3N4 ceramics. J. Eur. Ceram. Soc. 41 (2021) 5115-5126

Moník M., Delgado-Raack S., Hadraba H., Jech D., Risch R.: Rock physics and the circulation of Neolithic axeheads in Central Europe and the western Mediterranean. Wear 474-475 (2021) 203708

Fintová S., Kuběna I., Chlupová A., Jambor M., Šulák I., Chlup Z., Polák J.: Frequency-dependent fatigue damage in polycrystalline copper analyzed by FIB tomography. Acta Mater. 211 (2021) 116859

Moník M., Hadraba H., Milde D., Chlup Z., Nerudová Z., Schnabl P.: Heat treatment and mechanics of Moravian Jurassic cherts. Archaeol Anthropol Sci 13 (2021) 158

Černý M., Chlup Z., Strachota A., Brus J., Schweigstillová J., Rýglová Š., Bičáková O.: In-situ measurement of mechanical properties and dimensional changes of preceramic thermosets during their pyrolysis conversion to ceramics using thermomechanical analysis. Ceram. Int. 47 (2021) 23285-23294

Hammal M., Chlup Z., Ingr T., Staněk J., Mounajjed R.: Effectiveness of dentin pre-treatment on bond strength of two self-adhesive resin cements compared to an etch-and-rinse system: an in vitro study. PeerJ 9 (2021) e11736

Veverka J., Lukáč F., Kądzielawa A., Koller M., Chlup Z., Hadraba H., Karlík M., Legut D., Vontorová J., Chráska T., Vilémová M.: Ultrafine-grained W-Cr composite prepared by controlled W-Cr solid solution decomposition. Mater. Lett. 304 (2021) 130728

Neuberger H., Hernandez F., Ruck S., Arbeiter F., Bonk S., Rieth M., Stratil L., Müller O., Volker K.: Advances in Additive Manufacturing of fusion materials. Fusion Eng. & Design 167 (2021) 112309

Ostapovec A., K. K., Máthis K., Šiška F.: Interaction of Migrating Twin Boundaries with Obstacles in Magnesium. Metals 11 (2021) 154

Veverka J., Vilémová M., Chlup Z., Hadraba H., Lukáč F., Csáki Š., Matějíček J., Vontorová J., Chráska T.: Evolution of carbon and oxygen concentration in tungsten prepared by field assisted sintering and its effect on ductility. International Journal of Refractory Metals and Hard Materials 97 (2021) 105499

Holzer J., Chlup Z., Kruml T., Gröger R.: Plastic deformation of magnetically isotropic Cr single crystals compressed at 77 K. Int. J. Plast. 138 (2021) 102938

Fintová S., Kuběna I., Jarý M., Luptáková N., Stratil L., Šiška F., Svoboda J.: Creep properties of heat-treated Fe-Al-O ODS alloy. Kovové materiály 59 (2021) 39-50

Bertolla L., Šulák I., Buršík J., Dlouhý I., Smilek J., Mácová P., Holas J.: Exfoliation of hexagonal boron nitride nanosheets in low-modulus concentrated alkali silicate pastes. Mater. Lett. 292 (2021) 129551

---

Vilémová M., Hadraba H., Weiss Z., Lukáč F., Csáki Š., Chlup Z., Matějíček J., Chráska T.: Phase, Composition and Structure Changes of CoCrNi-Based Concentrated Alloys Resulting from High Temperature Oxidation. Materials 13 (2020) 2276

Akhtar M., Hadzhieva Z., Dlouhý I., Boccaccini A.: Electrophoretic Deposition and Characterization of Functional Coatings Based on an Antibacterial Gallium (III)-Chitosan Complex. Coatings 10 (2020) 483

Akhtar M., Ilyas K., Dlouhý I., Šiška F., Boccaccini A.: Electrophoretic Deposition of Copper(II)-Chitosan Complexes for Antibacterial Coatings. Int. J. Mol. Sci. 21 (2020) 2637

Drdlíková K., Drdlík D., Hadraba H., Klement R., Maca K.: Optical and mechanical properties of mn-doped transparent alumina and their comparison with selected rare earth and transient metal doped aluminas. J. Eur. Ceram. Soc. 40 (2020) 4894-4900

Stratil L., Horník V., Dymáček P., Roupcová P., Svoboda J.: The Influence of Aluminum Content on Oxidation Resistance of New-Generation ODS Alloy at 1200°C. Metals 10 (2020) 1478

Matějíček J., Veverka J., Yin C., Vilémová M., Terentyev D., Wirtz M., Gago M., Dubinko A., Hadraba H.: Spark plasma sintered tungsten - mechanical properties, irradiation effects and thermal shock performance. J. Nucl. Mater. 542 (2020) 152518

Janovská M., Sedlák P., Čížek J., Koller M., Šiška F., Seiner H.: Characterization of bonding quality of a cold-sprayed deposit by laser resonant ultrasound spectroscopy. Ultrasonics 106 (2020) 106140

Kastyl J., Chlup Z., Šťastný P., Trunec M.: Machinability and properties of zirconia ceramics prepared by gelcasting method. Adv. Appl. Ceram. 119 (2020) 252-260

Šiška F., Čížek J., Seiner H., Dlouhý I.: Numerical analysis of geometrically induced hardening in planar architectured materialss. Composite Structures 233 (2020) 111633-111643

Orlovská M., Chlup Z., Bača L., Janek M., Kitzmantel M.: Fracture and mechanical properties of lightweight alumina ceramics prepared by fused filament fabrication. J. Eur. Ceram. Soc. 40 (2020) 4837-4843

Chlup Z., Novotná L., Šiška F., Drdlík D., Hadraba H.: Effect of residual stresses to the crack path in alumina/zirconia laminates. J. Eur. Ceram. Soc. 40 (2020) 5810-5818

Moravčík I., Horník V., Minárik P., Li L., Dlouhý I., Janovská M., Raabe D., Li Z.: Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy. Mater. Sci. Eng. A 781 (2020) 139242

Tatarko P., Grasso S., Kovalčíková A., Medveď D., Dlouhý I., Reece M.: Highly textured and strongly anisotropic TiB2 ceramics prepared using magnetic field alignment (9T). J. Eur. Ceram. Soc. 40 (2020) 1111-1118

Drdlík D., Chlup Z., Hadraba H., Drdlíková K.: Surface roughness improvement of near net shaped alumina by EPD. Journal of the Australian Ceramic Society 56 (2020) 721-727

Moravčík I., Gamanov Š., Moravčíková-Goueva L., Kováčová Z., Kitzmantel M., Neubauer E., Dlouhý I.: Influence of Ti on the Tensile Properties of the High-Strength Powder Metallurgy High Entropy Alloys. Materials 13 (2020) 578

Šťastný P., Chlup Z., Trunec M.: Gel-tape casting as a novel method for the production of flexible fine-grained alumina sheets. J. Eur. Ceram. Soc. 40 (2020) 2542-2547

Koller M., Vilémová M., Lukáč F., Beran P., Čížek J., Hadraba H., Matějíček J., Veverka J., Seiner H.: An ultrasonic study of relaxation processes in pure and mechanically alloyed tungsten. International Journal of Refractory Metals and Hard Materials 90 (2020) 105233

Fintová S., Kuběna I., Luptáková N., Jarý M., Šmíd M., Stratil L., Šiška F., Svoboda J.: Development of advanced Fe-Al-O ODS alloy microstructure and properties due to heat treatment. J. Mater. Res. 35 (2020) 2789-2797

Čiriprová L., Falat L., Homolová V., Džupon M., Džunda R., Dlouhý I.: The Effect of Electrolytic Hydrogenation on Mechanical Properties of T92 Steel Weldments under Different PWHT Conditions. Materials 13 (2020) 3653

Šiška F., Čech J., Haušild P., Hadraba H., Chlup Z., Husák R., Stratil L.: Twinning in CoCrFeNiMn high entropy alloy induced by nanoindentation. Mater. Sci. Eng. A 784 (2020) 139297

Chlup Z., Černý M., Kácha P., Hadraba H., Strachota A.: Fracture resistance of partially pyrolysed polysiloxane preceramic polymer matrix composites reinforced by unidirectional basalt fibres. J. Eur. Ceram. Soc. 40 (2020) 4879-4885

Kovalčíková A., Tatarko P., Sedlák R., Medveď D., Chlup Z., Múdra E., Dusza J.: Mechanical and tribological properties of TiB2-SiC and TiB2-SiC-GNPs ceramic composites. J. Eur. Ceram. Soc. 40 (2020) 4860-4871

Hadraba H., Chlup Z., Drdlík D., Šiška F.: Characterisation of mechanical and fracture behaviour of Al2O3/ZrO2/BaTiO3 laminate by indentation. J. Eur. Ceram. Soc. 40 (2020) 4799-4807

Moravčík I., Hadraba H., Li L., Dlouhý I., Raabe D., Li Z.: Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility. Scr. Mater. 178 (2020) 391-397

Fan N., Čížek J., Huang C., Xie X., Chlup Z., Jenkins R., Lupoi R., Yin S.: A new strategy for strengthening additively manufactured cold spray deposits through in-process densification. Additive Manufacturing 36 (2020) 101626

Černý M., Chlup Z., Strachota A., Halasová M., Schweigstillová J., Kácha P., Svítilová J.: Potential of glass basalt or carbon fibres for reinforcement of partially pyrolysed compositeswith improved temperature and fire resistance. Ceramics - Silikáty 64 (2020) 115-124

---

Čížek J., Kovařík O., Šiška F., Bensch J., Čupera J., Matějková M., Siegl J., Chráska T., Khor K.: Increasing Fatigue Endurance of Hydroxyapatite and Rutile Plasma Sprayed Biocomponents by Controlling Deposition In-Flight Properties. ACS Biomaterials Science & Engineering 5 (2019) 1703-1714

Jurči P., Ďurica J., Dlouhý I., Horník J., Planieta R., Kralovič D.: Application of -140 °C Sub-Zero Treatment For Cr-V Ledeburitic Steel Service Performance Improvement. Metall. Mater. Trans. A 50 (2019) 2413-2434

Dymáček P., Bártková D., Horník V., Stratil L., Mašek B., Svoboda J.: New Generation of ODS Alloys. Key Eng. Mater. 810 (2019) 113-118

Tofel P., Machů Z., Chlup Z., Hadraba H., Drdlík D., Ševeček O., Majer Z., Holcman V., Hadaš Z.: Novel layered architecture based on Al2O3/ZrO2/BaTiO3 for SMART piezoceramic electromechanical converters. The European Physical Journal Special Topics 228 (2019) 1575-1588

Moník M., Nerudová Z., Schnabl P., Kdýr Š., Hadraba H.: Did heat treatment of flints take place in the Moravian Magdalenian? The case of Balcarka cave. J. Archaeol. Sci.-Rep. 25 (2019) 610-620

Chlup Z., Černý M., Halasová M., Strachota A.: Behaviour of Partially Pyrolysed Composite Reinforced by Fibres of Various Compositions. Procedia Struct. Integr. 23 (2019) 505-510

Bertolla L., Dlouhý I., Bartoníčková E., Toušek J., Nováček J., Mácová P.: Deconstruction of microfibrillated cellulose into nanocrystalline cellulose rods and mesogenic phase formation in concentrated low-modulus sodium silicate solution. Cellulose 26 (2019) 4325-4344

Ševeček O., Bertolla L., Chlup Z., Řehořek L., Majer Z., Marcián P., Kotoul M.: Modelling of cracking of the ceramic foam specimen with a central notch under the tensile load. Theor. Appl. Fract. Mech. 100 (2019) 242-250

Hasegawa M., Inui T., Dlouhý I.: Effect of Heat Treatment at (Beta+Gama) Two Phase Region on Fracture Toughness in TiAl Intermetallic Compound. Key Eng. Mater. 810 (2019) 21-26

Oplt T., Hutař P., Pokorný P., Náhlík L., Chlup Z., Berto F.: Effect of the free surface on the fatigue crack front curvature at high stress asymmetry. Int. J. Fatigue 118 (2019) 249-261

Dlouhý I., Řehořek L., Seiner H., Čížek J., Šiška F.: Architectured Multi-Metallic Structures Prepared by Cold Dynamic Spray Deposition. Key Eng. Mater. 810 (2019) 107-112

Husák R., Hadraba H., Chlup Z., Heczko M., Kruml T., Puchý V.: ODS EUROFER Steel Strengthened by Y-(Ce, Hf, La, Sc, and Zr) Complex Oxides. Metals 9 (2019) 1148

Kusý M., Rízeková-Trnková L., Krajčovič J., Dlouhý I., Jurči P.: Can Sub-zero Treatment at -75 °C Bring Any Benefits to Tools Manufacturing?. Materials 12 (2019) 3827

Javed H., Sabato A., Dlouhý I., Halasová M., Bernardo E., Salvo M., Herbrig K., Walter C., Smeacetto F.: Shear Performance at Room and High Temperatures of Glass-Ceramic Sealants for Solid Oxide Electrolysis Cell Technology. Materials 12 (2019) 298

Dymáček P., Svoboda J., Jirková H., Stratil L., Horník V.: Microstructure evolution and creep strength of new-generation oxide dispersion strengthened alloys with high volume fraction of nano-oxides. Procedia Struct. Integr. 17 (2019) 427-433

Chlup Z., Drdlík D., Fides M., Kovalčíková A., Hadraba H.: Properties of BaTiO3/Al2O3 Laminate Structure by Nanoindentation. Procedia Struct. Integr. 23 (2019) 499-504

Jurči P., Dlouhý I., Horník J., Priknerová P., Mrštný Z.: Relationships between the Microstructure, Hardness and Fracture toughness of Differently Sub-Zero Treated Tool Steel. Defect Diffus. Forum 395 (2019) 95-112

Neuberger H., Rey J., Arbeiter F., Hernandez F., Ruck S., Koehly C., Stratil L., Niewöhner R., Felde A.: Evaluation of conservative and innovative manufacturing routes for gas cooled Test Blanket Module and Breeding Blanket First Wall. Fusion Eng. & Design 146 (2019) 2140-2143

Vilémová M., Illková K., Csáki Š., Lukáč F., Hadraba H., Matějíček J., Chlup Z., Klečka J.: Thermal and oxidation behavior of CoCrFeMnNi alloy with and without yttrium oxide particle dispersion. J. Mater. Eng. and Performance 28 (2019) 5850-5859

Kotrechko S., Zimina G., Revka V., Dlouhý I.: Engineering Version of Local Approach to Fracture and its Application for RPV Lifetime Prediction. Key Eng. Mater. 810 (2019) 15-20

Gianchandani P., Casalegno V., Salvo M., Ferraris M., Dlouhý I.: Refractory Metal, RM - Wrap: A tailorable, pressure-less joining technology. Ceram. Int. 45 (2019) 4824-4834

Masini A., Strohbach T., Šiška F., Chlup Z., Dlouhý I.: Electrolyte-Supported Fuel Cell: Co-Sintering Effects of Layer Deposition on Biaxial Strength of Layer Deposition on Biaxial Strength. Materials 12 (2019) 306

Hasegawa M., Hirata K., Dlouhý I.: Microstructural Change and Fracture Behavior under Different Heat Exposure Conditions on Thermal Barrier Coatings Deposited on TiAl Intermetallic Compound. Key Eng. Mater. 810 (2019) 27-33

Gröger R., Chlup Z., Sojková T., Kuběna I.: Interplay of slip and twinning in niobium single crystals compressed at 77 K. J. Mater. Res. 34 (2019) 261-270

Halasová M., Kuběna I., Roupcová P., Černý M., Strachota A., Chlup Z.: Iron precipitation in basalt fibres embedded in partially pyrolysed methylsiloxane matrix. Composites Part A 123 (2019) 286-292

Chlup Z., Fintová S., Hadraba H., Kuběna I., Vilémová M., Matějíček J.: Fatigue Behaviour and Crack Initiation in CoCrFeNiMn High-Entropy Alloy Processed by Powder Metallurgy. Metals 9 (2019) 1-12

Barbalini M., Bertolla L., Toušek J., Malucelli G.: Hybrid Silica-Phytic Acid Coatings: Effect on the Thermal Stability and Flame Retardancy of Cotton. Polymers 11 (2019) 1-22

---

Dobeš F., Hadraba H., Chlup Z., Dlouhý A., Vilémová M., Matějíček J.: Compressive creep behavior of an oxide-dispersion-strengthened CoCrFeMnNi high-entropy alloy. Mater. Sci. Eng. A 732 (2018) 99-104

Romero A., Tamburini S., Taveri G., Toušek J., Dlouhý I., Bernardo E.: Extension of the 'Inorganic Gel Casting' Process to the Manufacturing of Boro-Alumino-Silicate Glass Foams. Materials 11 (2018) 2545

Yu M., Picot O., Saunders T., Dlouhý I., Feng J., Titirici M., Mahajan A., Reece M.: Graphene-reinforced silicon oxycarbide composites prepared by phase transfer. Carbon 139 (2018) 813-823

Taveri G., Grasso S., Gucci F., Toušek J., Dlouhý I.: Bio-Inspired Hydro-Pressure Consolidation of Silica. Adv. Funct. Mater. 28 (2018) 1805794

Gröger R., Chlup Z., Kuběna I., Kruml T.: Slip activity in molybdenum single crystals compressed at 77 K. Philos. Mag. 98 (2018) 2749-2768

Halasová M., Černý M., Strachota A., Chlup Z.: Effect of Pyrolysis Temperature on the Mechanical Response in Partially Pyrolysed Polysiloxanes. Key Eng. Mater. 784 (2018) 55-60

Hasegawa M., Sakurai K., Stratil L., Dlouhý I., Fukutomi H.: Fracture toughness of a lamellar orientation-controlled TiAl-based alloy processed by either one-step or two-step compression at high temperature. Mater. Sci. Eng. A 721 (2018) 303-310

Taveri G., Bernardo E., Dlouhý I.: Mechanical performance of glass-based geopolymer matrix composites reinforced with cellulose fibers. Materials 11 (2018) 2395

Čížek J., Brožek V., Chráska T., Lukáč F., Medřický J., Mušálek R., Tesař T., Šiška F., Antoš Z., Čupera J., Matějková M., Špotz Z., Houdková S., Kverka M.: Silver-Doped Hydroxyapatite Coatings Deposited by Suspension Plasma Spraying . J. Thermal Spray Technol. 27 (2018) 1333-1343

Šiška F., Stratil L., Hadraba H., Fintová S., Kuběna I., Horník V., Husák R., Bártková D., Záležák T.: Strengthening mechanisms of different oxide particles in 9Cr ODS steel at high temperatures. Mater. Sci. Eng. A 732 (2018) 112-119

Ševeček O., Majer Z., Marcián P., Bertolla L., Kotoul M.: Computational Analysis of Crack-Like Defects Influence on the Open Cell Ceramic Foam Tensile Strength. Key Eng. Mater. 774 (2018) 271-276

Bertolla L., Chlup Z., Tatarko P., Hanzel O., Ševeček O., Roupcová P., Dlouhý I.: Preparation and characterization of novel environmentally friendly Al2O3/SiO2/CaO ceramic foams. Ceram. Int. 44 (2018) 19063-19069

Masini A., Šiška F., Ševeček O., Chlup Z., Dlouhý I.: Elastic properties of multi-layered ceramic systems for SOCs, International Journal of Applied Ceramic Technology. J. Appl. Ceram. Technol. 15 (2018) 370-379

Chlup Z., Bača L., Hadraba H., Kuběna I., Roupcová P., Kováčová Z.: Low-temperature consolidation of high-strength TiB2 ceramic composites via grain-boundary engineering using Ni-W alloy. Mater. Sci. Eng. A 738 (2018) 194-202

Šťastný P., Chlup Z., Kalasová D., Zikmund T., Kaiser J., Trunec M.: Epoxy-based gelcasting of machinable hydroxyapatite foams for medical applications. J. Amer. Ceram. Soc. 101 (2018) 3317-3327

Záležák T., Šiška F., Stratil L., Fintová S., Horník V., Bártková D., Husák R., Svoboda J., Dlouhý A.: An integration of 3D discrete dislocation dynamics with numerical tensile testing. Acta Phys. Pol. A 134 (2018) 777-780

Gröger R., Chlup Z., Sojková T.: Deformation twinning in vanadium single crystals tested in compression at 77 K. Mater. Sci. Eng. A 737 (2018) 413-421

Stratil L., Šiška F., Hadraba H., Dlouhý I.: The size effect on J-R curve for construction steels and its prediction by simplified mechanical model. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 6B (2018) 141606

Jurči P., Ptačinová J., Sahul M., Dománková M., Dlouhý I.: Metallurgical principles of microstructure formation in sub-zero treated cold-work tool steels - a review. Matériaux & Techniques 106 (2018) 104

Chlup Z., Černý M., Strachota A., Hadraba H., Halasová M.: Effect of the exposition temperature on the behaviour of partially pyrolysed hybrid basalt fibre composites. Composites B 147 (2018) 122-127

Svoboda J., Horník V., Stratil L., Hadraba H., Mašek B., Khalaj O., Jirková H.: Microstructure Evolution in ODS Alloys with a High-Volume Fraction of Nano Oxides. Metals 8 (2018) 1079

Moravčík I., Gouvea L., Horník V., Kováčová Z., Kitzmantel M., Neubauer E., Dlouhý I.: Synergic strengthening by oxide and coherent precipitate dispersions in high-entropy alloy prepared by powder metallurgy. Scr. Mater. 157 (2018) 24-29

Jurči P., Dlouhý I., Priknerová P., Mrštný Z.: Effect of Sub-Zero Treatment Temperatures on Hardness, Flexural Strength, and Fracture Toughness of Vanadis 6 Ledeburitic Die Steel. Metals 8 (2018) 1047

Guo T., Šiška F., Cheng J., Barnett M.: Initiation of basal slip and tensile twinning in magnesium alloys during nanoindentation. J. Alloys Comp. 731 (2018) 620-630

Drdlík D., Sláma M., Hadraba H., Drdlíková K., Cihlář J.: Physical, mechanical, and biological properties of electrophoretically deposited lithium-doped calcium phosphates. Ceram. Int. 44 (2018) 2884-2891

Hojna A., Hadraba H., Di Gabrielle F., Husák R.: Behaviour of pre-stressed T91 and ODS steels exposed to liquid lead-bismuth eutectic. Corros. Sci. 131 (2018) 264-277

Guo T., Chao Q., Šiška F., Cheng J., Varma R., Barnett M.: Analysing single twinning events in Mg-6Zn using nanoindentation. J. Alloys Comp. 768 (2018) 510-516

---

Roleček J., Salamon D., Chlup Z.: Mechanical properties of hybrid composites prepared by ice-templating of alumina. J. Eur. Ceram. Soc. 37 (2017) 4279-4286

Matějíček J., Vilémová M., Nevrlá B., Kocmanová L., Veverka J., Halasová M., Hadraba H.: The influence of substrate temperature and spraying distance on the properties of plasma sprayed tungsten and steel coatings deposited in a shrouding chamber. Surf. Coat. Technol. 318 (2017) 217-223

Neuberger H., Rey J., Hees M., Materna-Morris E., Bolich D., Aktaa J., Meier A., Fischer S., Schorle C., Fuhrmann U., Heger R., Dlouhý I., Stratil L., Kloetzer B.: Selective Laser Sintering as Manufacturing Process for the Realization of Complex Nuclear Fusion and High Heat Flux Components. Fusion Sci. Technol. 72 (2017) 667-672

Kozák V., Chlup Z., Padělek P., Dlouhý I.: Prediction of the Traction Separation Law of Ceramics Using Iterative Finite Element Modelling. Solid State Phenom. 258 (2017) 186-189

Kastyl J., Chlup Z., Clemens F., Trunec M.: Mechanical properties of zirconia core-shell rods with porous core and dense shell prepared by thermoplastic co-extrusion. J. Eur. Ceram. Soc. 37 (2017) 2439-2447

Moravčík I., Čížek J., Kováčová Z., Nejezchlebová J., Kitzmantel E., Neubauer E., Kuběna I., Horník V., Dlouhý I.: Mechanical and Microstructural Characterization of Powder Metallurgy CoCrNi Medium Entropy Alloy. Mater. Sci. Eng. A 701 (2017) 370-380

Chlup Z., Žižka R., Kania J., Přibyl M.: Fracture behaviour of teeth with conventional and mini-invasive access cavity designs. J. Eur. Ceram. Soc. 37 (2017) 4423-4429

Dlouhý I., Stratil L., Fukutomi H., Hasegawa M.: Crack Resistance Characterization in TiAl Intermetallics with Enhanced Toughness. Key Eng. Mater. 741 (2017) 13-18

Dlouhý I., Stratil L., Šiška F.: Subsized Specimens for Fracture Resistance Characterisation Including Transferability Issues. Key Eng. Mater. 741 (2017) 110-115

Ptačinová J., Sedlická V., Hudáková M., Dlouhý I., Jurči P.: Microstructure - Toughness relationships in sub-zero treated and tempered Vanadis 6 steel compared to conventional treatment. Mater. Sci. Eng. A 702 (2017) 241-258

Šiška F., Stratil L., Čížek J., Ghaderi A., Barnett M.: Numerical analysis of twin thickening process in magnesium alloys. Acta Mater. 124 (2017) 9-16

Stratil L., Šiška F., Dlouhý I., Serrano M.: The application of miniaturize three-point-bend specimens for determination of the reference temperature of A533 Cl.1 Steel. J. Press. Vess. Technol. 134 (2017) 041410

Trunec M., Chlup Z.: Subtractive manufacturing of customized hydroxyapatite scaffolds for bone regeneration. Ceram. Int. 43 (2017) 11265-11273

Šiška F., Stratil L., Hadraba H., Fintová S., Kuběna I., Záležák T., Bártková D.: High temperature deformation mechanisms in the 14% Cr ODS alloy. Mater. Sci. Eng. A 689 (2017) 34-39

Drdlík D., Drdlíková K., Hadraba H., Maca K.: Optical, mechanical and fractographic response of transparent alumina ceramics on erbium doping. J. Eur. Ceram. Soc. 37 (2017) 4265-4270

Bertolla L., Dlouhý I., Tatarko P., Viani A., Mahajan A., Chlup Z., Reece M., Boccaccini A.: Pressureless spark plasma-sintered Bioglass 45S5 with enhanced mechanical properties and stress-induced new phase formation. J. Eur. Ceram. Soc. 37 (2017) 2727-2736

Hojna A., Gabriele F., Hadraba H., Husák R., Kuběna I., Rozumová L., Bublíková P., Kalivodová J., Matějíček J.: Fracture behaviour of the 14Cr ODS steel exposed to helium and liquid lead. J. Nucl. Mater. 490 (2017) 143-154

Boccaccini D., Ševeček O., Frandsen H., Dlouhý I., Molin S., Charlas B., Hjelm J., Cannio M., Hendriksen P.: Determination of the bonding strength in solid oxide fuel cells´ interfaces by Schwickerath crack initiation test. J. Eur. Ceram. Soc. 37 (2017) 3565-3578

Kotrechko S., Gryshchenko V., Kozák V., Dlouhý I.: Method of Threshold Stress Determination for a Local Approach to Cleavage Fracture. Solid State Phenom. 258 (2017) 281-285

Maca K., Pouchlý V., Drdlík D., Hadraba H., Chlup Z.: Dilatometric study of anisotropic sintering of alumina/zirconialaminates with controlled fracture behaviour. J. Eur. Ceram. Soc. 37 (2017) 4287-4295

Záležák T., Šiška F., Stratil L., Luptáková N., Šmíd M., Bártková D., Svoboda J., Dlouhý A.: A Numerical Analysis of Deformation Processes in Oxide Dispersion-Strengthened Materials - Influence of Dislocation-Particle Interactions. Solid State Phenom. 258 (2017) 106-109

Ptačinová J., Jurči P., Dlouhý I.: Toughness of Ledeburitic Vanadis 6 Steel after Sub-Zero Treatment for 17 h and Double Tempering. Mater. Technol. 51 (2017) 729-733

Černý M., Chlup Z., Strachota A., Schweigstillová J., Svítilová J., Halasová M.: Rheological behaviour and thermal dilation effects of alumino-silicate adhesives intended for joining of high-temperature resistant sandwich structures. J. Eur. Ceram. Soc. 37 (2017) 2209-2218

Sakurai K., Hasegawa M., Dlouhý I.: Fracture Toughness of Massively Transformed and Subsequently Heat Treated TiAl Intermetallic Compound. Key Eng. Mater. 741 (2017) 25-30

Taveri G., Toušek J., Bernardo E., Boccaccini A., Dlouhý I.: Proving the role of boron in the structure of fly-ash/borosilicate glass based geopolymers. Mater. Lett. 200 (2017) 105-108

Kotoul M., Skalka P., Ševeček O., Bertolla L., Mertens J., Marcián P., Chawla N.: Crack bridging modelling in Bioglass (R) based scaffolds reinforced by poly-vinyl alcohol/microfibrillated cellulose composite coating. Mech. Mater. 110 (2017) 16-28

Hadraba H., Husák R., Stratil L., Šiška F., Chlup Z., Puchý V., Michalička J.: Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications. Fusion Eng. & Design 124 (2017) 1028-1032

Toniolo N., Taveri G., Hurle K., Roether J., Ercole P., Dlouhý I., Boccaccini A.: Fly-Ash-Based Geopolymers: How the Addition of Recycled Glass or Red Mud Waste Influences the Structural and Mechanical Properties. J. Ceram. Sci. Technol. 08 (2017) 411-420

Raga R., Khader I., Chlup Z., Kailer A.: Damage progression in silicon nitride undergoing non-conforming hybrid cyclic contact. Int. J. Fatigue 105 (2017) 97-110

Ševeček O., Majer Z., Bertolla L., Chlup Z., Kotoul M.: Fracture-Mechanics Behaviour of Ceramic Foam with Macroscopic Stress Concentrator upon the Tensile Test. Key Eng. Mater. 754 (2017) 99-102

Tatarko P., Chlup Z., Mahajan A., Casalegno V., Saunders T., Dlouhý I., Reece M.: High temperature properties of the monolithic CVD Beta-SiC materials joined with a pre-sintered MAX phase Ti3SiC2 interlayer via solid-state diffusion bonding . J. Eur. Ceram. Soc. 37 (2017) 1205-1216

Šiška F., Guo T., Stratil L., Čížek J., Barnett M.: Numerical study of stress distribution and size effect during AZ31 nanoindentation. Comp. Mater. Sci. 126 (2017) 393-399

Bártková D., Šmíd M., Mašek B., Svoboda J., Šiška F.: Kinetic study of static recrystallization in an Fe-Al-O ultra-fine-grained nanocomposite. Philos. Mag. Lett. 97 (2017) 379-385

Stratil L., Šiška F., Hadraba H., Bártková D., Fintová S., Puchý V.: Fracture behaviour of the ODS steels prepared by internal oxidation. Fusion Eng. & Design 124 (2017) 1108-1111

Stratil L., Šiška F., Hadraba H., Fintová S., Mrňa T., Dlouhý I.: The effect of specimen size for the P91 steel at elevated and high temperatures. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 1A (2017) 131595

Drdlíková K., Klement R., Hadraba H., Drdlík D., Galušek D., Maca K.: Luminescent Eu3+-doped transparent alumina ceramics with high hardness. J. Eur. Ceram. Soc. 37 (2017) 4271-4277

Hadraba H., Chlup Z., Dlouhý A., Dobeš F., Roupcová P., Vilémová M., Matějíček J.: Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy. Mater. Sci. Eng. A 689 (2017) 252-256

---

Halasová M., Černý M., Strachota A., Chlup Z., Dlouhý I.: Fracture response of SiOC-based, composites on dynamic loading. J. Composite Mater. 50 (2016) 1547-1554

Man J., Kuběna I., Smaga M., Man O., Järvenpää A., Weidner A., Chlup Z., Polák J.: Microstructural changes during deformation of AISI 300 grade austenitic stainless steels: Impact of chemical heterogeneity. Procedia Struct. Integr. 2 (2016) 2299-2306

Falat L., Kepič J., Čiriprová L., Ševc P., Dlouhý I.: The effects of postweld heat treatment and isothermal aging on T92 steel heat-affected zone mechanical properties of T92/TP316H dissimilar weldments . J. Mater. Res. 31 (2016) 1532-1543

Šiška F., Stratil L., Šmíd M., Luptáková N., Záležák T., Bártková D.: Deformation and fracture behavior of the P91 martensitic steel at high temperatures. Mater. Sci. Eng. A 672 (2016) 1-6

Boccaccini D., Ševeček O., Frandsen H., Dlouhý I., Molin S., Cannio M., Hjelm J., Hendriksen P.: Investigation of thebonding strength and bonding mechanisms of SOFCs interconnector-electrode interfaces. Mater. Lett. 162 (2016) 250-253

Raga R., Khader I., Chlup Z., Kailer A.: Damage initiation and evolution in silicon nitride under non-conforming lubricated hybrid rolling contact. Wear 360-361 (2016) 147-159

Othmani Y., Böhlke T., Lube T., Fellmeth A., Chlup Z., Colonna F., Hashibon A.: Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data. J. Eur. Ceram. Soc. 36 (2016) 1109-1125

Porwal H., Saggar R., Tatarko P., Grasso S., Saunders T., Dlouhý I., Reece M.: Effect of lateral size of graphene nano-sheets on the mechanical properties and machinability of alumina nano-composites. Ceram. Int. 42 (2016) 7533-7542

Dlouhý I., Chlup Z., Hadraba H., Řehořek L.: Response of alumina foam to tensile mechanical loading including stress concentrator effect. Prog. Mater. Sci. 12 (2016) 106-111

Sobotová J., Jurči P., Dlouhý I.: The effect of subzero treatment on microstructure, fracture toughness, and wear resistance of Vanadis 6 tool steel. Mater. Sci. Eng. A 652 (2016) 192-204

Tingting G., Šiška F., Matthew R., Barnett M.: Distinguishing between slip and twinning events during nanoindentation of magnesium alloy AZ31. Scr. Mater. 110 (2016) 10-13

Krautgasser C., Chlup Z., Supancic P., Danzer R., Bermejo R.: Influence of subcritical crack growth on the determination of fracture toughness in brittle materials. J. Eur. Ceram. Soc. 36 (2016) 1307-1312

Chlupová A., Chlup Z., Kruml T.: Fatigue properties and microstructure of quasicrystalline AlFeCrTi alloy. Int. J. Fatigue 91 (2016) 251-256

---

Šiška F., Tawfeeq A., Dlouhý I., Barnett M.: Stiffness and strength degradation of damaged truss core composites. Composite Struct. 125 (2015) 287-294

Kastyl J., Chlup Z., Clemens F., Trunec M.: Ceramic core-shell composites with modified mechanical properties prepared by thermoplastic co-extrusion. J. Eur. Ceram. Soc. 35 (2015) 2873-2881

Chlup Z., Černý M., Strachota A., Svítilová J., Halasová M.: Effect of ageing at 1200 °C in oxidative environment on the mechanical response of SiOC foams. Ceram. Int. 41 (2015) 9030-9034

Strachota A., Černý M., Chlup Z., Rodzeń K., Depa K., Halasová M., Šlouf M., Schweigstillová J.: Preparation of finely macroporous SiOC foams with high mechanical properties and with hierarchical porosity via pyrolysis of siloxane/epoxide composite. Ceram. Int. 41 (2015) 8402-8410

Stratil L., Šiška F., Hadraba H., Dlouhý I.: The prediction of size effect on J-R curve for Eurofer97 steel by simplified mechanical model. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 1A (2015) 117787

Bertolla L., Chlup Z., Stratil L., Boccaccini A., Dlouhý I.: Effect of hybrid polymer coating of Bioglass (R) foams on mechanical response during tensile loading. Adv. Appl. Ceram. 114 (2015) S63-S69

Černý M., Chlup Z., Strachota A., Svítilová J., Schweigstillová J., Halasová M., Rýglová Š.: S-O-C ceramic foams derived from polymethylphenylsiloxane precursor with starch as foaming agent. J. Eur. Ceram. Soc. 35 (2015) 3427-3436

Saggar R., Porwal H., Tatarko P., Dlouhý I., Reece M.: Boron nitride nanosheets reinforced glass matrix composites. Adv. Appl. Ceram. 114 (2015) S26-S33

Strachota A., Černý M., Chlup Z., Depa K., Šlouf M., Sucharda Z.: Foaming of polysiloxane resins with ethanol: A new route to pyrolytic macrocellular SiOC foams. Ceram. Int. 41 (2015) 13561-13571

Šiška F., Stratil L., Dlouhý I., Barnett M.: Modelling of the stiffness evolution of truss core structures damaged by plastic buckling. Finite Elem. Anal. Design 100 (2015) 1-11

Strachota A., Černý M., Chlup Z., Šlouf M., Brus J., Pleštil J., Sucharda Z., Havelcová M., Halasová M.: Preparation of silicon oxynitrocarbide (SiONC) and of its ceramic-fibre-composites via hydrosilylation/radical polymerization/pyrolysis. J. Non-Crystall. Solids 423-424 (2015) 9-17

Strečková M., Hadraba H., Bureš R., Faberová M., Roupcová P., Kuběna I., Medvecký L., Girman V., Kollar P., Fuzer J., Cizmar E.: Chemical synthesis of nickel ferrite spinel designed as an insulating bilayer coating on ferromagnetic particles. Surf. Coat. Technol. 270 (2015) 66-76

Chlup Z., Bača L., Halasová M., Neubauer E., Hadraba H., Stelzer N., Roupcová P.: Effect of metallic dopants on the microstructure and mechanical properties of TiB2. J. Eur. Ceram. Soc. 35 (2015) 2745-2754

Černý M., Chlup Z., Strachota A., Halasová M., Rýglová Š., Schweigstillová J., Svítilová J., Havelcová M.: Changes in structure and in mechanical properties during the pyrolysis conversion of crosslinked polymethylsiloxane and polymethylphenylsiloxane resins to silicon oxycarbide glass. Ceram. Int. 41 (2015) 6237-6247

Stratil L., Dlouhý I., Šiška F., Serrano M.: The application of miniaturized three-point-bend specimens for determination of the reference temperature of JRQ steel. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 1B (2015) 117787

Chlup Z., Hadraba H., Drdlík D., Dlouhý I.: Micro fibres containing laminates prepared by EPD: microstructure and fracture behaviour. Key Eng. Mater. 654 (2015) 53-57

Halasová M., Černý M., Strachota A., Chlup Z., Dlouhý I.: Fracture response of SiOC based composites on dynamic loading. J. Composite Mater. 1 (2015) 1-8

Čížek J., Matějková M., Dlouhý I., Šiška F., Kay C., Karthikeyan J., Kuroda S., Kovařík O., Siegl J., Loke K., Khor K.: Influence of Cold-Sprayed, Warm-Sprayed and Plasma-Sprayed Layers Deposition on Fatige Properties of Steel Specimens. J. Thermal Spray Technol. 24 (2015) 758-768

---

Kozák V., Chlup Z.: Crack Growth Modelling in the Silicon Nitride Ceramics by Application of the Cohesive Zone Approach. Key Eng. Mater. 592-593 (2014) 193-196

Bertolla L., Dlouhý I., Boccaccini A.: Preparation and characterization of Bioglass(R)-based scaffolds reinforced bypoly-vinyl alcohol/microfibrillated cellulose composite coating. J. Eur. Ceram. Soc. 34 (2014) 3379-3387

Chlup Z., Černý M., Strachota A., Halasová M., Dlouhý I.: Fibre-matrix interface development during high temperature exposition of long fibre reinforced SiOC matrix. Key Eng. Mater. 592-593 (2014) 401-404

Bertolla L., Dlouhý I., Philippart A., Boccaccini A.: Mechanical reinforcement of Bioglass (R)-based scaffolds by novel polyvinyl-alcohol/microfibrillated cellulose composite coating. Mater. Lett. 118 (2014) 204-207

Bertolla L., Dlouhý I., Philippart A., Boccaccini A.: Mechanical reinforcement of Bioglass (R)-based scaffolds by novel polyvinyl-alcohol/microfibrillated cellulose composite coating. Mater. Lett. 118 (2014) 204-207

Hadraba H., Strečková M., Husák R., Roupcová P.: Mechanical alloying of 80Ni-14.7Fe-4.4Mo-0.5Mn-0.3Si soft magnetic material of Permalloy type. Powder Metall. Progr. 14 (2014) 208-214

Strečková M., Baťková M., Baťko I., Hadraba H., Bureš R.: Imaging of Magnetic Domains and Domain Walls in Spherical Fe-Si Powder Using Magnetic Force Microscopy. Acta Phys. Pol. A 126 (2014) 92-93

Chlup Z., Černý M., Strachota A., Sucharda Z., Halasová M., Dlouhý I.: Influence of pyrolysis temperature on fracture response in SiOC based composites reinforced by basalt woven fabric. J. Eur. Ceram. Soc. 34 (2014) 3389-3398

Tatarko P., Grasso S., Chlup Z., Porwal H., Kašiarová M., Dlouhý I., Reece M.: Toughening effect of multi-walled boron nitride nanotubes and their influence on the sintering behaviour of 3Y-TZP zirconia ceramics. J. Eur. Ceram. Soc. 34 (2014) 1829-1843

Chlup Z., Hadraba H., Drdlík D., Maca K., Dlouhý I., Bermejo R.: On the determination of the stress-free temperature for alumina-zirconia multilayer structures. Ceram. Int. 40 (2014) 5787-5793

Klusák J., Hrstka M., Profant T., Krepl O., Ševeček O., Kotoul M.: The influence of the first non-singular stress terms on crack initiation direction in an orthotropic bi-material plate. Theor. Appl. Fract. Mech. 71 (2014) 67-75

Porwal H., Tatarko P., Saggar R., Grasso S., Mani M., Dlouhý I., Dusza J., Reece M.: Tribological properties of silica-graphene nano platelet composite. Ceram. Int. 40 (2014) 12067-12074

Hadraba H., Husák R., Kuběna I., Bureš R., Faberová M., Strečková M.: Preparation of ferritic 17%Cr ODS steel by mechanical alloying from prealloyed steel powder. Powder Metall. Progr. 14 (2014) 222-227

Strečková M., Fuzer J., Kobera L., Brus J., Faberová M., Bureš R., Kollar P., Lauda M., Medvecký L., Girman V., Hadraba H., Baťková M., Baťko I.: A comprehensive study of soft magnetic materials based on FeSi spheres and polymeric resin modified by silica nanorods. Mater. Chem. Phys. 147 (2014) 649-660

Drdlík D., Bartoníčková E., Hadraba H., Cihlář J.: Influence of anionic stabilization of alumina particles in 2-propanol medium on the electrophoretic deposition and mechanical properties of deposits. J. Eur. Ceram. Soc. 34 (2014) 3365-3371

Tatarko P., Grasso S., Porwal H., Chlup Z., Saggar R., Dlouhý I., Reece M.: Boron nitride nanotubes as a reinforcement for brittle matrices. J. Eur. Ceram. Soc. 34 (2014) 3339-3349

Profant T., Klusák J., Ševeček O., Kotoul M., Hrstka M., Marcián P.: An effect of the first non-singular term of the Williams asymptotic expansion to the stability of the bi-material orthotropic notch. Key Eng. Mater. 592-593 (2014) 745-748

---

Řehořek L., Chlup Z., Meng D., Yunos D., Boccaccini A., Dlouhý I.: Response of 45S5 Bioglass (R) foams to tensile loading. Ceram. Int. 39 (2013) 8015-8020

Porwal H., Tatarko P., Grasso S., Hu C., Boccaccini A., Dlouhý I., Reece M.: Toughened and machinable glass matrix composites reinforced with graphene and graphene-oxide nano platelets. Sci. Technol. Adv. Mater. 14 (2013) 055007

Tatarko P., Kašiarová M., Chlup Z., Dusza J., Šajgalík P., Vávra I.: Influence of rare-earth oxide additives and SiC nanoparticles on the wear behaviour of Si3N4-based composites at temperatures up to 900°C. Wear 300 (2013) 155-162

Cihlář J., Drdlík D., Cihlářová Z., Hadraba H.: Effect of acids and bases on electrophoretic deposition of alumina and zirconia particles in 2-propanol. J. Eur. Ceram. Soc. 33 (2013) 1885-1892

Profant T., Klusák J., Ševeček O., Hrstka M., Kotoul M.: An energetic criterion for a micro-crack of finite length initiated in orthotropic bi-material notches. Eng. Fract. Mech. 110 (2013) 396-409

Porwal H., Tatarko P., Grasso S., Khaliq J., Dlouhý I., Reece M.: Graphene reinforced alumina nano-composites. Carbon 64 (2013) 359-369

Stratil L., Hadraba H., Kozák V., Dlouhý I.: Identification and application of Gurson-Tvergaard-Needleman model for sub-sized three-point- bend geometry. Acta Technica CSAV 58 (2013) 141-155

Stratil L., Hadraba H., Dlouhý I.: Ductile damage identification and tensile notch effect for Eurofer97 steel. Acta Metall. Slovaca 3 (2013) 185-190

Profant T., Klusák J., Ševeček O., Kotoul M.: On the direction of a crack initiated from an orthotropic bi-material notch composed of materials with non-uniform fracture mechanics properties. Key Eng. Mater. 525-526 (2013) 545-548

Hadraba H., Drdlík D., Chlup Z., Máca F., Dlouhý I., Cihlář J.: Layered ceramic composites via control of electrophoretic deposition kinetics. J. Eur. Ceram. Soc. 33 (2013) 2305-2312

---

Klusák J., Profant T., Ševeček O., Kotoul M.: Crack propagation from bi-material notches - matched asymptotic procedure. Key Eng. Mater. 488-489 (2012) 416-419

Marcián P., Majer Z., Florian Z., Dlouhý I.: Stress Strain Analysis of High Porous Ceramics. Adv. Mater. Res. 482-484 (2012) 1330-1333

Hadraba H., Chlup Z., Drdlík D., Maca K., Dlouhý I.: Control of electrophoretic deposition kinetics for preparation of laminated alumina/zirconia ceramic composites. Key Eng. Mater. 507 (2012) 209-213

Hadraba H., Drdlík D., Chlup Z., Maca K., Dlouhý I., Cihlář J.: Laminated alumina/zirconia ceramic composites prepared by electrophoretic deposition. J. Eur. Ceram. Soc. 32 (2012) 2053-2056

Halasová M., Chlup Z., Strachota A., Černý M., Dlouhý I.: Mechanical response of novel SiOC glasses to high temperature exposition. J. Eur. Ceram. Soc. 32 (2012) 4489-4495

Stratil L., Kozák V., Hadraba H., Dlouhý I.: Stress state analysis of sub-sized pre-cracked three-point-bend specimen. Eng. Mech. 19 (2012) 121-129

Chlup Z., Hadraba H., Slabáková L., Drdlík D., Dlouhý I.: Fracture behaviour of alumina and zirconia thin layered laminate. J. Eur. Ceram. Soc. 32 (2012) 2057-2061

Ahmedw A., Chlup Z., Dlouhý I., Rawlings R., Boccaccini A.: Mechanical Properties of Low-Density SiC-Coated Carbon-Bonded Carbon Fiber Composites. Int. J. Appl. Ceram. Technol. 9 (2012) 401-412

Boccaccini D., Maioli M., Cannio M., Dlouhý I., Romagnoli M., Leonelli C., Boccaccini A.: A lifetime prediction method based on Cumulative Flaw Length Theory. J. Eur. Ceram. Soc. 32 (2012) 1175-1186

Chlup Z., Hadraba H., Drdlík D., Maca K., Dlouhý I.: Development of internal stresses in alumina-zirconia laminates. Key Eng. Mater. 507 (2012) 221-226

Černý M., Strachota A., Chlup Z., Sucharda Z., Žaloudková M., Glogar P., Kuběna I.: Strength, Elasticity and Failure of Composites with Pyrolyzed Matrices Based on Polymethylsiloxane Resins with Optimized Ratio of D and T Components. J. Composite Mater. 47 (2012) 1055-1066

Šupová M., Svítilová J., Chlup Z., Černý M., Weishauptová Z., Suchý T., Machovič V., Sucharda Z., Žaloudková M.: Relation between mechanical properties and pyrolysis temperature of phenol formaldehyde resin for gas separation membranes. Ceramics - Silikáty 56 (2012) 40-49

---

Cho J., Inam F., Reece M., Chlup Z., Dlouhý I., Shaffer M., Boccaccini A.: Carbon nanotubes: do they toughen brittle matrices?. J. Mater. Sci. 46 (2011) 4770-4779

Tatarko P., Chlup Z., Dusza J.: Microstructure, fracture and damage mechanisms in rare-earth doped silicon nitride ceramics. Key Eng. Mater. 465 (2011) 93-96

Dlouhý I., Tadafder M., Hadraba H.: Micromechanical Aspects of Transgranular and Intergranular Failure Competition. Key Eng. Mater. 465 (2011) 399-402

Stratil L., Hadraba H., Buršík J., Dlouhý I.: Comparison of microstructural properties and Charpy impact behaviour between different plates of the Eurofer97 steel and effect of isothermal ageing. J. Nucl. Mater. 416 (2011) 311-317

Chlup Z., Černý M., Strachota A., Dlouhý I.: Role of pyrolysis conditions on fracture behaviour of fibre reinforced Composites. Key Eng. Mater. 465 (2011) 455-458

Strachota A., Černý M., Glogar P., Sucharda Z., Havelcová M., Chlup Z., Dlouhý I., Kozák V.: Preparation and optimalization of silicon oxycarbide composites toughened by inorganic fibers by pyrolysis of precursor composites with siloxane matrix. Acta Phys. Pol. A 120 (2011) 326-330

Malíková (Šestáková) L., Bermejo R., Chlup Z., Danzer R.: Strategies for fracture toughness, strength and reliability optimisation of ceramic-ceramic laminates. Int. J. Mater. Res. 102 (2011) 613-626

Salamon D., Chlup Z., Lefferts L., Wessling M.: Tailoring of free standing microchannels structures via microtemplating. Mater. Res. Bull. 46 (2011) 505-551

Jurči P., Dlouhý I.: Coating of Cr-V ledeburitic steel with CrN containing a small addition of Ag. Appl. Surf. Sci. 257 (2011) 10581-10589

Jurči P., Dlouhý I.: Fracture behaviour of P/M Cr-V ledeburitic steel with different surface toughness. Materials Engineering - Materialove inzinierstvo 18 (2011) 36-43

Kotrechko S., Mamedov S., Dlouhý I., Kozák V.: Use of Local Approach for Prediction of the Irradiation Effect on Fracture Toughness of Pressure Vessel Steel. Key Eng. Mater. 465 (2011) 568-573

Hadraba H., Kazimierzak B., Stratil L., Dlouhý I.: Microstructure and impact properties of ferritic ODS ODM401 (14%Cr-ODS of MA957 type). J. Nucl. Mater. 417 (2011) 241-244

Hadraba H., Fournier B., Stratil L., Malaplate J., Rouffie A., Wident P., Ziolek L., Béchadeb J.: Influence of microstructure on impact properties of 9-18%Cr ODS steels for fusion/fission applications. J. Nucl. Mater. 411 (2011) 112-118

Chlup Z., Černý M., Strachota A., Kozák V.: Properties of modified polysiloxane based ceramic matrix for long fibre reinforced composite materials. Plastics, Rubber and Composites 40 (2011) 380-385

Dlouhý I., Hadraba H., Chlup Z., Šmída T.: Prediction of fracture toughness temperature dependence applying neural network. Structur. Integr. and Life 11 (2011) 9-14

---

Brumek J., Strnadel B., Dlouhý I.: Use of genetic algorithm for identification of nonlinear constitutive material models. Chem. Listy 104 (2010) 299-302

---

Chlup Z., Todd I., GARCIA-ESCORIAL A., Lieblich M., Chlupová A., O´Dwyer J.: Bulk nanostructured aluminium alloy Al93Fe3Cr2Ti2: Processing and characterisation. Mater. Sci. Forum 426 (2003) 2417-2422