Ústav fyziky materiálů AV ČR, v. v. i. > Institute of Physics of Materials > Publications

2024

Rogl G., Binder G., Michor H., Buršík J., Eiberger M., Grytsiv A., Giester G., Rogl P.: Tau-borides (Mnx{Ru,Os,Ir}1-x)23B6: X-ray single crystal and TEM data, physical properties. J. Alloys Comp. 993 (2024) 174604

Jirásková Y., Buršík J., Gembalová L., Čížek J., Pytlik J., Životský O.: Effect of Si and Al on structural and physical properties of ternary and quaternary Co2Fe-based Heusler alloys. Physica B 673 (2024) 415463

Brož P., Vřešťál J., Sopoušek J., Weiss K., Buršík J., Buršíková V., Záděra A., Müller P., Čupera J., Rogl G., Parzer M., Bauer E., Michor H., Rogl P.: High entropy alloys (FeCoNi)0.75Cr(0.25-x)Cux - thermal stability and physical properties. J. Alloys Comp. 993 (2024) 174628

Rogl G., Eiberger M., Steiner S., Michor H., Buršík J., Giester G., Grytsiv A., Rogl P.: Borides Mn3-x{Rh,Ir}5B2 with Ti3Co5B2-type: X-ray single crystal and TEM data, physical properties. Solid State Sciences 154 (2024) 107583

Romaka V., Rogl G., Buršík J., Grytsiv A., Giester G., Rogl P.: Novel compounds in the Sc-rich part of the systems Sc-{Co,Pd,Pt}-Ga: Structure and bonding. J. Alloys Comp. 998 (2024) 174864

Friák M., Čípek P., Pavlů J., Zobač O., Roupcová P., Miháliková I., Holec D., Msallamová Š., Michalcová A.: Structure-property relations in Pb-supersaturated metastable Sn-rich Pb-Sn alloys. Metall. Mater. Trans. A 55 (2024) 1867-1877

Brož P., Yan X., Romaka V., Fabrichnaya O., Kriegel M., Buršíková V., Buršík J., Vřešťál J., Rogl G., Michor H., Bauer E., Eiberger M., Grytsiv A., Giester G., Rogl P.: Constitution, physical properties and thermodynamic modeling of the Hf-Mn system. J. Alloys Comp. 976 (2024) 173060

Friák M., Zobač O., Chlup Z., Fikar O., Papež P., Zelený M., Kroupa A.: Materials properties of defect-stabilized off-stoichiometric tau-phase Al2Ge2Mg. Intermetallics 169 (2024) 108294

Failamani F., Grytsiv A., Buršík J., Giester G., Rogl P.: The Ce-Ni-Si system revisited: More homologue compounds?. Inorganic Chemistry 63 (2024) 8604-8614

Wibner P., Kriegel R., Garstenauer D., Zobač O., Kuběna I., Rösch N., Seyller T., Armbrüster M., Richter K.: Facile thermodynamically controlled synthesis of intermetallic Zn1-xPdx/Al2O3 and its methanol steam reforming properties. Journal of Physical Chemistry C 128 (2024) 6906-6916



2023

Zobač O., Žižka R., Roupcová P., Kroupa A.: Experimental study of the Ni-Se-Sn phase diagram isothermal sections at 800 K, 1000 K and 1100 K. J. Phase Equil. Diffus. 44 (2023) 594-605

Král L., Chesalkin A., Čermák J., Roupcová P., Prusov E.: Influence of Fe on the hydrogen storage properties of LaCeNi alloys. Langmuir 39 (2023) 6061-6068

Homolová V., Čiripová L., Zobač O., Zemanová A., Falat L.: Experimental investigation phase equilibria of the Ho-Ir-O ternary system at 1073 K. Materials 16 (2023) 5406

Životský O., Jirásková Y., Buršík J., Janickovic D., Čížek J.: Effect of rapid solidification in Mn2FeSi alloy formation and its physical properties. J. Magn. Magn. Mater. 580 (2023) 170914

Mrázek J., Kamrádková S., Buršík J., Skála R., Bartoň I., Vařák P., Baravets Y., Podrazký O.: Nanocrystalline (HoxY1-x)2Ti2O7 luminophores for short- and mid-infrared lasers. Journal of Sol-Gel Science and Technology 107 (2023) 320-328

Zobač O., Karpíšková L., Kroupa A.: Experimental study of the ternary phase diagram Al-Ge-Mg. J. Phase Equil. Diffus. 44 (2023) 127-136

Zobač O., Kroupa A.: CALPHAD-Based thermodynamic description of the binary phase diagram Ge-Ti. J. Phase Equil. Diffus. 44 (2023) 115-126



2022

Jirásková Y., Pizúrová N., Buršík J., Friák M., Čížek J., Vlasák T., Čegan T., Nikodym M., Luňáček J.: Magneto-structural correlations in Fe-25 at%Al influenced by substitution of Fe by Co and by thermal treatment. J. Alloys Comp. 904 (2022) 163996

Zobač O., Richter K., Kroupa A.: Experimental Phase Diagram of the Ag-Se-Sn System at 250, 400 and 550 °C. J. Phase Equil. Diffus. 43 (2022) 32-42

Svoboda J., Drdlíková K., Drdlík D., Kroupa A., Michalička J., Maca K.: Doping of alumina ceramics by manganese Thermodynamical and experimental approach. Process. Appl. Ceram. 16 (2022) 13-21

Zobač O., Zemanová A., Chen S., Kroupa A.: CALPHAD-Type Assessment of the Pb-Se-Sn System. J. Phase Equil. Diffus. 43 (2022) 243-255

Pizúrová N., Buršík J., Sojková T., Roupcová P., Schneeweiss O.: Magnetic properties and morphology of ultra-small iron oxide nanoparticles. J. Phys.: Conf. Series 2315 (2022) 012023

Jirásková Y., Zažímal F., Buršík J., Svoboda T., Dzik P., Homola T.: Structural and physical characterization of iron-oxide based inks for inkjet printing. J. Magn. Magn. Mater. 562 (2022) 169810

Romaka V., Rogl G., Buršíková V., Buršík J., Michor H., Grytsiv A., Bauer E., Giester G., Rogl P.: Physical properties of {Ti,Zr,Hf}2Ni2Sn compounds. Dalton Trans. 51 (2022) 361-374

Verma R., Král L., Ostapovec A.: Faceting of {11-26} twin interfaces in rolled pure magnesium. Philos. Mag. 102 (2022) 861-874

Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Král L., Kvapilová M., Roupcová P., Horváth J.: Creep Resistance of S304H Austenitic Steel Processed by High-Pressure Sliding. Materials 15 (2022) 331

Čermák J., Král L., Roupcová P.: Hydrogen storage in TiVCrMo and TiZrNbHf multiprinciple-element alloys and their catalytic effect upon hydrogen storage in Mg. Renewable Energy 188 (2022) 411-424

Jirásková Y., Buršík J., Životský O., Luňáček J., Alexa P., Uhlar R., Ederer J., Janoš P.: Nanostructured magnetite-ceria-based composite: synthesis, calcination, properties, and applications. J. Alloys Comp. 916 (2022) 165481

Pizúrová N., Hlaváček A., Kavčiaková Z., Roupcová P., Kuběna I., Buršík J., Sokovnin S.: Nanoceria prepared by electron beam evaporation. Nanocon 2022 Conference proceedings 2022 (2022) 33-38

Romaka V., Rogl G., Binder G., Michor H., Buršík J., Grytsiv A., Giester G., Rogl P.: Phase relations, structure, properties and DFT study of compounds in the Sc-rich part of the systems Sc-{Mn,Fe,Co,Ni}-Ga. J. Alloys Comp. 919 (2022) 165540

Buršík J., Charvátová Campbell A., Havlíček M., Klapetek P., Kelarová Š., Přibyl R., Václavik R., Stupavská M., Buršíková V.: Surface morphology of nanostructured plasma-polymer thin films deposited under dusty plasma conditions. J. Phys.: Conf. Series 2315 (2022) 012017

Chen S., Kroupa A., Du J., Zemanová A., Hutabalian Y., Vřešťál J., Chiu K.: Experimental and Theoretical Study of the Ag-Sn-Te Phase Diagram. J. Phase Equil. Diffus. 43 (2022) 139-163

Čermák J., Král L., Roupcová P.: A new light-element multi-principal-elements alloy AlMg2TiZn and its potential for hydrogen storage. Renewable Energy 198 (2022) 1186-1192



2021

Gröbner J., Kroupa A., Zobač O.: Cr-Ni-Si (Chromium-Nickel-Silicon). Ternary Alloys - A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagram 20 (2021) 294-313

Pal-Val P., Vatazhuk O., Ostapovec A., Král L., Pinc J.: Thermoactivated Dislocation Motion in Rolled and Extruded Magnesium: Data of the Low-Temperature Acoustic Experiment . Metals 11 (2021) 1647

Zobač O., Kroupa A.: Ag-Bi-Sn (Gold-Bismuth-Tin). Ternary Alloys - A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagram 20 (2021) 165-176

Kroupa A., Zobač O., Richter K.: The thermodynamic reassessment of the binary Al-Cu system. J. Mater. Sci. 56 (2021) 3430-3443

Zelenka F., Strádal J., Brož P., Vřešťál J., Buršík J., Zemanová A., Rogl G., Rogl P.: Study of thermal stability of n-type skutterudites Sr0.07Ba0.07Yb0.07Co4Sb12 by differential thermal analysis and Knudsen effusion method. CALPHAD 73 (2021) 102258

Životský O., Luňáček J., Jirásková Y., Buršík J., Ederer J., Janoš P., Cabanova K.: Influence of annealing temperature on degradation efficiency and iron oxide transformations in CeO2/Fe-oxide sorbents. AIP Adv. 11 (2021) 015308

Zelenka F., Brož P., Vřešťál J., Buršík J., Zemanová A., Rogl G., Rogl P.: Study of thermal stability of half-Heusler alloys TiFe1.33Sb and TixNb1-xFeSb (x = 0, 0.15) by differential thermal analysis and Knudsen effusion method. CALPHAD 74 (2021) 102292

Bertolla L., Šulák I., Buršík J., Dlouhý I., Smilek J., Mácová P., Holas J.: Exfoliation of hexagonal boron nitride nanosheets in low-modulus concentrated alkali silicate pastes. Mater. Lett. 292 (2021) 129551

Friák M., Mazalová M., Turek I., Zemanová A., Kastil J., Kamarád J., Míšek M., Arnold Z., Schneeweiss O., Všianská M., Zelený M., Kroupa A., Pavlů J., Šob M.: An Ab Initio Study of Pressure-Induced Changes of Magnetism in Austenitic Stoichiometric Ni2MnSn. Materials 14 (2021) 523

Kirkovska I., Homolová V., Zobač O., Zemanová A.: Experimental Study and Thermodynamic Modeling of B-Fe-W System. J. Phase Equil. Diffus. 42 (2021) 499-514

Kroupa A., Record M., Chen H., Zobač O.: Bi-Sb-Sn (Bismuth-Antimony-Tin). Ternary Alloys - A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagram 20 (2021) 240-253

Chen S., Huang ., Hsu Y., Liu J., Zemanová A., Kroupa A.: Phase diagram of Pb-Se-Te system I: Experimental study. CALPHAD 74 (2021) 102310

Vřešťál J., Kroupa A., Zobač O.: Ni-Sb-Sn (Nickel-Antimony-Tin). Ternary Alloys - A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagram 20 (2021) 534-554

Zobač O., Buchlovská K., Pavlů J., Kroupa A.: Thermodynamic Description of Binary System Nickel-Selenium. J. Phase Equil. Diffus. 42 (2021) 468-478

Gröbner J., Kroupa A., Zobač O.: Bi-Sn-Zn (Bismuth-Tin-Zinc). Ternary Alloys - A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagram 20 (2021) 254-271

Král P., Dvořák J., Král L., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kunčická L., Kvapilová M., Svobodová M.: Paper 035: Creep behaviour and microstructure changes of heat resistant steel P92 processed by severe plastic deformation. ECCC 2021, 5th Int. Creep and Fract. Conf. 2021 (2021) 123-132

Rogl G., Renk O., Ghosh S., Mallik R., Grytsiv A., Buršík J., Schafler E., Tuomisto F., Bauer E., Rogl P.: Properties of HPT-Processed Large Bulks of p-Type Skutterudite DD0.7Fe3CoSb12 with ZT > 1.3. ACS Applied Energy Materials 4 (2021) 4831-4844

Čermák J., Král L., Roupcová P.: Hydrogen desorption from alloys Mg-Cu(-KCl): Cu catalysis in detail. Int. J. Hydrogen Energy 46 (2021) 14494-14507

Yan X., Brož P., Vřešťál J., Vlach J., Buršík J., Mazalová M., Pavlů J., Smetana B., Rogl G., Eiberger M., Grytsiv A., Michor H., Müller H., Giester G., Rogl P.: On the constitution and thermodynamic modeling of the phase diagrams Nb-Mn and Ta-Mn. J. Alloys Comp. 865 (2021) 158715

Káňa T., Čermák J., Král L.: Substitution of nickel in Mg2Ni and its hydride with elements from groups XIII and XIV: An ab initio study. Int. J. Hydrogen Energy 46 (2021) 15691-15701

Životský O., Markov D., Hrabovská K., Buršík J., Jirásková Y.: Analysis of Magneto-Optical Hysteresis Loops of Amorphous and Surface-Crystalline Fe-Based Ribbons. Materials 14 (2021) 141

Homolová V., Kroupa A.: Thermodynamic modeling of the Al-Co-Pd ternary system, aluminum rich corner. Metals 11 (2021) 1803

Sopoušek J., Drenčaková D., Brož P., Buršík J., Zemanová A., Roupcová P.: On thermal stability of nanocrystalline Ag-Cu-S powders. J Nanopart Res 23 (2021) 138

Fikar O., Vřešťál J., Kroupa A., Chen S.: The study of the Pb-Se-Te phase diagram: Part 2 - The thermodynamic assessment of the Se-Te and Pb-Se-Te systems. CALPHAD 74 (2021) 102309



2020

Sklenička V., Kuchařová K., Svoboda M., Král P., Kvapilová M., Dvořák J.: The Creep Resistance of Short-Fibre Reinforced Metal Matrix Composites. Structural. Integr. 16 (2020) 93-99

Dinsdale A., Zobač O., Kroupa A., Khvan A.: Use of third generation data for the elements to model the thermodynamics of binary alloy systems: Part 1 - The critical assessment of data for the Al-Zn system. CALPHAD 68 (2020) 101723

Zobač O., Kroupa A.: The Thermodynamic Assessment of the Binary System Bi-Rh. J. Phase Equil. Diffus. 41 (2020) 900-906

Rogl G., Soprunyuk V., Schranz W., Zehetbauer M., Buršík J., Müller H., Bauer E., Rogl P.: Resistivity and Thermal Expansion (4.2-820 K) of Skutterudites after Severe Plastic Deformation via HPT. Z. Anorg. Allg. Chem. 646 (2020) 1267-1272

Čermák J., Král L., Roupcová P.: Significant decrease of hydride decomposition enthalpy in ordered Mg-In alloys induced by growing hydrogen concentration. Kovové materiály 58 (2020) 161-167

Vykoukal V., Zelenka F., Buršík J., Káňa T., Kroupa A., Pinkas J.: Thermal properties of Ag@Ni core-shell nanoparticles. CALPHAD 69 (2020) 101741

Sopoušek J., Pinkas J., Buršík J., Svoboda M., Krásenský P.: Continuous Flow Synthesis of Iron Oxide Nanoparticles Using Water-in-Oil Microemulsion. Colloid Journal 82 (2020) 727-734

Rogl G., Ghosh S., Wang L., Buršík J., Grytsiv A., Kerber M., Bauer E., Mallik R., Chen X., Zehetbauer M., Rogl P.: Half-Heusler alloys: Enhancement of ZT after severe plastic deformation (ultra-low thermal conductivity). Acta Mater. 183 (2020) 285-300

Zobač O., Kroupa A., Richter K.: Experimental isothermal sections of the ternary phase diagram Al-Cu-Si at 600 °C and 800 °C. J. Mater. Sci. 55 (2020) 15322-15333

Brož P., Zelenka F., Vřešťál J., Zemanová A., Kroupa A., Buršík J., Svoboda M., Šimoníková L., Pokorný T.: Experimental study and thermodynamic re-assessment of the Co-Sb system. CALPHAD 68 (2020) 101694

Zobač O., Kroupa A., Richter K.: Experimental study of the Al-Cu-Zn ternary phase diagram. Mater. Sci. 55 (2020) 10796-10810

Jirásková Y., Buršík J., Ederer J., Janoš P., Jurica J., Luňáček J., Životský O.: Effect of magnetite transformations on degradation efficiency of cerium dioxide-magnetite composite. Journal of Materials Research and Technology 9 (2020) 4431-4439

Čermák J., Král L., Roupcová P.: Significantly decreased stability of MgH2 in the Mg-In-C alloy system: Long-period-stacking-ordering as a new way how to improve performance of hydrogen storage alloys?. Renewable Energy 150 (2020) 204-212

Sklenička V., Kuchařová K., Svoboda M., Kvapilová M., Dvořák J., Král P.: Creep behaviour of unreinforced and reinforced QE22 magnesium alloy: A comparison. Kovové materiály 58 (2020) 71-82

Du J., Zemanová A., Hutabalian Y., Kroupa A., Chen S.: Phase diagram of Ag-Pb-Sn system. CALPHAD 71 (2020) 101997

Chen S., Huang ., Hsu Y., Kroupa A.: Phase Diagram of the Pb-Se-Sn System. J. Electronic Mater. 49 (2020) 4714-4729



2019

Jedličková V., Zemanová A., Kroupa A.: The Thermodynamic Assessment of the Co-Sn System. J. Phase Equil. Diffus. 40 (2019) 21-33

Kroupa A., Watson A.: In Celebration of Prof. Jan Vřešťál's 80th Birthday. J. Phase Equil. Diffus. 40 (2019) 1-2

Weiser A., Buršíková V., Jarý M., Dymáček P., Dugáček J., Frenzel J., Čermák J., Dlouhý A.: Strength of hydrogen-free and hydrogen-doped Ni50Ti50 shape memory platelets . Scr. Mater. 162 (2019) 151-155

Jirásková Y., Buršík J., Janičkovič D., Životský O.: Influence of Preparation Technology on Microstructural and Magnetic Properties of Fe2MnSi and Fe2MnAl Heusler Alloys. Materials 12 (2019) 1-14

Pinkas J., Sopoušek J., Brož P., Vykoukal V., Buršík J., Vřešťál J.: Synthesis, structure, stability and phase diagrams of selected bimetallic silver- and nickel-based nanoparticles. CALPHAD 64 (2019) 139-148

Kroupa A., Vykoukal V., Káňa T., Zemanová A., Pinkas J., Šob M.: The theoretical and experimental study of the Sb-Sn nano-alloys. CALPHAD 64 (2019) 90-96

Buršík J., Buršíková V., Rogl G., Rogl P.: Local mechanical properties of advanced skutterudites processed by various routes. IOP Conf. Ser.: Mater. Sci. Eng. 613 (2019) 012036

Brož P., Zelenka F., Kohoutek Z., Vřešťál J., Vykoukal V., Buršík J., Zemanová A., Rogl G., Rogl P.: Study of thermal stability of CoSb3 skutterudite by Knudsen effusion mass spectrometry. CALPHAD 65 (2019) 1-7

Zábranský L., Souček P., Vašina P., Dugáček J., Sťahel P., Buršík J., Svoboda M., Mikšová R., Peřina V., Balázsi K., Cigány Z., Buršíková V.: Microstructural changes of amorphous Mo-B-C coatings upon thermal annealing. Surf. Coat. Technol. 379 (2019) 125052

Jirásková Y., Buršík J., Janoš P., Luňáček J., Chrobak A., Životský O.: Effect of Iron Impurities on Magnetic Properties of Nanosized CeO2 and Ce-Based Compounds. Metals 9 (2019) 222

Brož P., Zelenka F., Sopoušek J., Hejduková M., Sojková T., Zobač O.: Thermal analysis and Knudsen effusion mass spectrometry combined in a specially-adapted commercial skimmer coupled instrument (Netzsch). CALPHAD 65 (2019) 86-92

Zobač O., Kroupa A., Zemanová A., Richter K.: Experimental Description of the Al-Cu Binary Phase Diagram. Metall. Mater. Trans. A 50 (2019) 3805-3815

Životský O., Buršík J., Janičkovič D., Titov A., Jirásková Y.: Low-temperature magnetic transitions in Fe2MnSi Heusler alloys prepared in bulk and ribbon form. J. Magn. Magn. Mater. 475 (2019) 5-9

Kroupa A., Pavlů J., Šob M.: Professor Jan Vřešťál and His Contributions Towards the Implementing of Ab Initio Data into the CALPHAD Method and Extension of the Phase Diagram Calculations Down to 0 K. J. Phase Equil. Diffus. 40 (2019) 3-9

Vykoukal V., Halasta V., Babiak M., Buršík J., Pinkas J.: Morphology Control in AgCu Nanoalloy Synthesis by Molecular Cu(I) Precursors. Inorganic Chemistry 58 (2019) 15246-15254

Král L., Čermák J.: Improvement of hydrogen storage properties of Mg by catalytic effect of Al-containing phases in Mg-Al-Ti-Zr-C powders. Int. J. Hydrogen Energy 44 (2019) 13561-13568

Káňa T., Zouhar M., Černý M., Šob M.: Ab initio study of the theoretical strength and magnetism of the Fe-Pd, Fe-Pt and Fe-Cu nanocomposites. J. Magn. Magn. Mater. 469 (2019) 100-107

Čermák J., Král L., Roupcová P.: Improved hydrogen sorption kinetics in Mg modified by chosen catalysts. Int. J. Hydrogen Energy 44 (2019) 8315-8324

Vykoukal V., Buršík J., Roupcová P., Cullen D., Pinkas J.: Solvothermal hot injection synthesis of core-shell AgNi nanoparticles. J. Alloys Comp. 770 (2019) 377-385

Zelenka F., Brož P., Vřešťál J., Buršík J., Rogl G., Grytsiv A., Rogl P.: Study of thermal stability of p-type skutterudites DD0.7Fe3CoSb12 by Knudsen effusion mass spectrometry. RSC Advances 9 (2019) 21451-21459

Mrázek J., Vytykáčová S., Buršík J., Puchý V., Girman V., Peterka P., Kašík I.: Sol-gel route to nanocrystalline Eu2Ti2O7 films with tailored structural and optical properties. J. Amer. Ceram. Soc. 102 (2019) 6713-6723

Brož P., Hejduková M., Vykoukal V., Zelenka F., Sopoušek J., Buršík J., Zobač O.: Study of surface effects and catalytic properties of selected Ni-based bimetallic nanoparticles by Knudsen effusion mass spectrometry. CALPHAD 64 (2019) 334-341

Sklenička V., Kuchařová K., Svoboda M., Kvapilová M., Král P., Dvořák J.: Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations. Int. J. Pres. Ves. Pip. 178 (2019) 104000



2018

Čermák J., Král L.: Hydrogen absorption in carbon allotropes and talc. Kovové materiály 56 (2018) 75-80

Čermák J., Král L.: Hydrogen storage behavior of Mg@Mg2Si and Mg@Mg17Al12 alloys with additions of carbon allotropes and talc. J. Alloys Comp. 744 (2018) 252-259

Jirásková Y., Buršík J., Seidlerová J., Mamulová Kutláková K., Šafařík I., Šafaříková M., Pospíšková K., Životský O.: Microstructural Analysis and Magnetic Characterization of Native and Magnetically Modified Montmorillonite and Vermiculite. J. Nanomater. 2018 (2018) 3738106

Sklenička V., Kvapilová M., Král P., Dvořák J., Svoboda M., Podhorná B., Zýka J., Hrbáček K., Joch A.: Degradation processes in high-temperature creep of cast cobalt-based superalloys. Mater. Character. 144 (2018) 479-489

Rogl G., Buršík J., Grytsiv A., Puchegger S., Soprunyuk V., Schranz W., Yan X., Bauer E., Rogl P.: Nanostructuring as a tool to adjust thermal expansion in high ZT skutterudites. Acta Mater. 145 (2018) 359-368

Sklenička V., Kuchařová K., Svoboda M.: Creep behaviour and microstructure evolution of advanced creep-resistant 9%Cr martensitic steels under cyclic thermal loading. Kovové materiály 56 (2018) 1-13

Mrázek J., Aubrecht J., Todorov F., Buršík J., Puchý V., Džunda R., Vytykáčová S., Kašík I.: CO2 laser-assisted preparation of transparent Eu2Ti2O7 thin films. Ceram. Int. 44 (2018) 9479-9483

Rogl P., Romaka V., Buršík J., Michor H., Reissner M., Giester G., Homolová V.: Structure and properties of a novel boride (V0.92Fe0.08)2FeB2 with partially ordered U3Si2-type. J. Alloys Comp. 746 (2018) 638-647

Titov A., Jirásková Y., Životský O., Buršík J., Janičkovič D.: Microstructure and magnetism of Co2FeAl Heusler alloy prepared by arc and induction melting compared with planar flow casting. AIP Adv. 8 (2018) 047206

Bannov A., Jašek O., Prášek J., Buršík J., Zajíčková L.: Enhanced Ammonia Adsorption on Directly Deposited Nanofibrous Carbon Films. J. Sensors 2018 (2018) 7497619

Ševčíková J., Bártková D., Goldbergová M., Kuběnová M., Čermák J., Frenzel J., Weiser A., Dlouhý A.: On the Ni-Ion release rate from surfaces of binary NiTi shape memory alloys. Appl. Surf. Sci. 427 (2018) 434-443

Káňa T., Ostapovec A., Paidar V.: The matrix-twin transition in a perfect Mg crystal: Ab initio study. Int. J. Plast. 108 (2018) 186-200

Bernard V., Zobač O., Vlková M., Mornstein V., Sopoušek J.: AgCu bimetallic nanoparticles modified by polyvinyl alcohol - The cells viability study in vitro. Lekar a technika - Clinician and Technology 48 (2018) 5-10

Homolová V., Kepič J., Zemanová A., Zobač O.: Experimental Study of Phase Composition of B-Fe-Mn-V Alloys and Thermodynamic Calculations of Phase Equilibria in the B-Mn-V and B-Fe-Mn-V Systems. Adv. Mater. Sci. Eng. 2018 (2018) 3950980

Paidar V., Ostapovec A., Káňa T.: Dislocation Content of Non-Classical Twin Boundaries in Hexagonal Metals . Acta Phys. Pol. A 134 (2018) 692-694

Rogl G., Grytsiv A., Anbalagan R., Buršík J., Kerber M., Schafler E., Zehetbauer M., Bauer E., Rogl P.: Direct SPD-processing to achieve high-ZT skutterudites. Acta Mater. 159 (2018) 352-363

Failamani F., Podloucký R., Buršík J., Rogl G., Michor H., Müller H., Bauer E., Giester G., Rogl P.: Boron-phil and boron-phob structure units in novel borides Ni3Zn2B and Ni2ZnB: experiment and first principles calculations. Dalton Trans. 47 (2018) 3303-3320

Souček P., Zábranský L., Buršíková V., Buršík J., Debnárová S., Svoboda M., Peřina V., Vašina P.: Fracture Resistance Enhancement in Hard Mo-B-C Coatings Tailored by Composition and Microstructure. J. Nanomater. 2018 (2018) 5184587

Luňáček J., Životský O., Janoš P., Došek M., Chrobak A., Maryško M., Buršík J., Jirásková Y.: Structure and magnetic properties of synthesized fine cerium dioxide nanoparticles. J. Alloys Comp. 753 (2018) 167-175

Buršík J., Buršíková V., Rogl G., Rogl P.: Microstructure and Local Mechanical Properties of Skutterudites with Addition of Metallic Borides. Key Eng. Mater. 784 (2018) 9-14



2017

Sopoušek J., Kryštofová A., Premović M., Zobač O., Polsterová S., Brož P., Buršík J.: Phase diagram prediction, synthesis, characterization, and thermal stability. CALPHAD 58 (2017) 25-33

Falat L., Ciripová L., Homolová V., Kroupa A.: The influence of isothermal ageing and subsequent hydrogen charging at room temperature on local mechanical properties and fracture characteristics of Martensitic- Bainitic weldments for power engineering. J. Mining Metall. B 53B (2017) 373-382

Buršík J., Buršíková V., Souček P., Zábranský L., Vašina P.: Characterization of Ta-B-C nanostructured hard coatings. Mater. Sci. Eng. A 175 (2017) 012020

Ostapovec A., Buršík J., Krahula K., Král L., Serra A.: On the relationship between (1 1 -2 2) and (1 1 -2 6) conjugate twins and double extension twins in rolled pure Mg. Philos. Mag. 97 (2017) 1088-1101

Čermák J., Král L., Roupcová P.: Improvement of hydrogen storage kinetics in ball-milled magnesium doped with antimony. Int. J. Hydrogen Energy 42 (2017) 6144-6151

Jirásková Y., Buršík J., Zemanová A., Čížek J., Hruška P., Životský O.: Effect of hydrogen on Fe and Pd alloying and physical properties. Int. J. Hydrogen Energy 42 (2017) 6885-6901

Titov A., Životský O., Hendrych A., Janičkovič D., Buršík J., Jirásková Y.: Co2FeSi Heusler Alloy Prepared by Arc Melting and Planar. Acta Phys. Pol. A 131 (2017) 654-656

Zábranský L., Buršíková V., Souček P., Vašina P., Dugáček J., Sťahel P., Buršík J., Svoboda M., Peřina V.: Thermal stability of hard nanocomposite Mo-B-C coatings. Vacuum 138 (2017) 199-204

Mrázek J., Boháček J., Vytykáčová S., Buršík J., Puchý V., Robert D., Kašík I.: Photolithographic patterning of nanocrystalline europium-titanate Eu2Ti2O7 thin films on silicon substrates. Mater. Lett. 209 (2017) 216-219

Kroupa A., Mazalová M., Richter K.: The reassessment of the Al-V system and new assessment of the Al-Si-V system. CALPHAD 59 (2017) 47-60

Hadraba H., Husák R., Stratil L., Šiška F., Chlup Z., Puchý V., Michalička J.: Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications. Fusion Eng. & Design 124 (2017) 1028-1032

Buršíková V., Sobota J., Grossman J., Fořt T., Dupák L., Zábranský L., Souček P., Vašina P., Buršík J.: Study of Fracture Resistance of Nanolaminate Coatings Using Indentation and Impact Tests. Solid State Phenom. 258 (2017) 318-321

Jirásková Y., Buršík J., Životský O., Luňáček J., Janoš P.: Magnetic and Mössbauer Study of Cerium-Based Reactive Sorbent. Acta Phys. Pol. A 131 (2017) 1096-1098

Sklenička V., Kuchařová K., Kvapilová M., Svoboda M., Král P., Dvořák J.: Creep properties of simulated heat-affected zone of HR3C austenitic steel. Mater. Character. 128 (2017) 238-247

Buršík J., Kuběna I., Buršíková V., Souček P., Zábranský L., Mirzaei S., Vašina P.: W-B-C Nanostructured Layers - Microstructure and Mechanical Properties. Solid State Phenom. 258 (2017) 416-419



2016

Káňa T., Hüger E., Legut D., Čiripová L., Šob M.: Magnetism and deformation of epitaxial Pd and Rh thin films. Phys. Rev. B 93 (2016) 134422

Buršíková V., Buršík J., Zábranský L., Souček P., Vašina P.: Study of the Local Mechanical Properties of Magnetron Sputtered Nanolaminate Coatings. Defect Diffus. Forum 368 (2016) 111-114

Čermák J., Král L., Roupcová P.: Influence of long-term ageing upon the capacity of hydrogen storage in two novel Mg-Ni-In-C alloys. Kovové materiály 54 (2016) 389-396

Životský O., Titov A., Jirásková Y., Buršík J., Hendrych A., Hrabovská K., Tsepelev V.: Surface and bulk magnetic anisotropy in bilayered CoSiB/FeNbCuSiB and FeNbSiB/FeSiB ribbons. J. Alloys Comp. 681 (2016) 402-411

Buršík J., Buršíková V., Souček P., Zábranský L., Vašina P.: Nanostructured Mo-B-C coatings. Rom. Rep. Phys. 68 (2016) 1069-1075

Luňáček J., Životský O., Jirásková Y., Buršík J., Janoš P.: Thermally stimulated iron oxide transformations and magnetic behaviour of cerium dioxide/iron oxide reactive sorbents. Mater. Character. 120 (2016) 295-303

Škoda D., Stýskalík A., Moravec Z., Bezdička P., Buršík J., Mutin P., Pinkas J.: Mesoporous SnO2-SiO2 and Sn-silica-carbon nanocomposites by novel non-hydrolytic templated sol-gel synthesis. RSC Advances 6 (2016) 68739-68747

Buršík J., Kuběna I., Buršíková V., Souček P., Zábranský L., Vašina P.: Mo-B-C and Ta-B-C Nanostructured Layers with Promising Fracture Toughness. Defect Diffus. Forum 368 (2016) 107-110

Repovský P., Homolová V., Ciripová L., Kroupa A., Zemanová A.: Experimental study and thermodynamic modelling of the B-Fe-Mn ternary system. CALPHAD 55 (2016) 252-259

Čermák J., Rothová V.: Calculation of ternary interdiffusion coefficients using a single diffusion couple. Kovové materiály 54 (2016) 305-314

Kočích R., Kunčická L., Král L., Macháčková A.: Sub-structure and mechanical properties of twist channel angular pressed aluminium. Mater. Character. 119 (2016) 75-83

Zábranský L., Buršíková V., Souček P., Vašina P., Buršík J.: On the study of the mechanical properties of Mo-B-C coatings. Eur. Phys. J. - Appl. Phys. 75 (2016) 24716



2015

Sklenička V., Kuchařová K., Kvapilová M., Svoboda M.: Factors influencing creep resistance in discontinuously reinforced magnesium metal matrix composites. Kovové materiály 53 (2015) 221-229

Sopoušek J., Zobač O., Buršík J., Roupcová P., Vykoukal V., Brož P., Pinkas J., Vřešťál J.: Heat-induced spinodal decomposition of Ag-Cu nanoparticles. Phys. Chem. Chem. Phys. 17 (2015) 28277-28285

Mrázek J., Surýnek M., Bakardijeva S., Buršík J., Proboštová J., Kašík I.: Luminescence properties of nanocrystalline europium titanate Eu2Ti2O7. J. Alloys Comp. 645 (2015) 57-63

Sopoušek J., Zobač O., Vykoukal V., Buršík J., Roupcová P., Brož P., Pinkas J., Vřešťál J.: Temperature stability of AgCu nanoparticles. J Nanopart Res 17 (2015) 478

Buršík J., Buršíková V., Jirásková Y.: Study of the Mechanical Properties of Single-Layered and Bilayered CoCrFeSi Ribbons Using Quasistatic and Dynamic Nanoindentation Tests. Key Eng. Mater. 662 (2015) 91-94

Jirásková Y., Buršík J., Hapla M., Turek I.: Influence of molybdenum on the alloying and physical properties of Fe-Al. J. Supercond. Novel Magn. 28 (2015) 905-910

Zobač O., Sopoušek J., Kroupa A.: Calphad-type assessment of the Sb-Sn-Zn ternary system. CALPHAD 51 (2015) 51-56

Kuchařová K., Sklenička V., Kvapilová M., Svoboda M.: Creep and microstructural processes in a low-alloy 2.25%Cr1.6%W steel (ASTM Grade 23). Mater. Character. 109 (2015) 1-8

Jirásková Y., Buršík J., Roupcová P., Jančík D., Čížek J.: Structural and compositional stability of the mechanically alloyed (Fe,Mo)-Al at elevated temperatures. Mater. Chem. Phys. 168 (2015) 108-116

Zábranský L., Buršíková V., Daniel J., Souček P., Vašina P., Dugáček J., Sťahel P., Caha O., Buršík J., Peřina V.: Comparative analysis of thermal stability of two different nc-TiC/a-C:H coatings. Surf. Coat. Technol. 267 (2015) 32-39

Rogl G., Grytsiv A., Buršík J., Horký J., Anbalagan R., Bauer E., Mallik R., Rogl P., Zehetbauer M.: Changes in microstructure and physical properties of skutterudites after severe plastic deformation. Phys. Chem. Chem. Phys. 17 (2015) 3715-3722

Buršík J., Buršíková V., Svoboda M.: Local Mechanical Properties of Cu-Co Alloys with Coherent Co Precipitates. Key Eng. Mater. 662 (2015) 15-18

Kroupa A., Káňa T., Buršík J., Zemanová A., Šob M.: Modelling of phase diagrams of nanoalloys with complex metallic phases: Application to Ni-Sn. Phys. Chem. Chem. Phys. 17 (2015) 28200-28210

Bauer E., Royanian E., Michor H., Sologub O., Scheidt E., Gonçalves A., Buršík J., Wolf W., Reith D., Blaas-Schenner C., Moser R., Podloucký R., Rogl P.: Superconductivity and spin fluctuations in the actinoid-platinum metal borides {Th,U}Pt3B. Phys. Rev. B 92 (2015) 024511

Ostapovec A., Buršík J., Gröger R.: Deformation due to migration of faceted twin boundaries in magnesium and cobalt. Philos. Mag. 95 (2015) 4106-4117

Mrázek J., Potel M., Buršík J., Mráček A., Kalistová A., Jonášová Š., Boháček J., Kašík I.: Sol-gel synthesis and crystallization kinetics of dysprosium-titanate Dy2Ti2O7 for photonic applications. Mater. Chem. Phys. 168 (2015) 159-167



2014

Čermák J., Král L.: Extremely slow carbon diffusion in carbon-supersaturated surface of ferrite. Kovové materiály 52 (2014) 125-133

Jirásková Y., Buršík J., Životský O., Cuda J.: Influence of Fe2O3 on alloying and magnetic properties of Fe-Al . Mater. Sci. Eng. B 186 (2014) 73-78

Kováč F., Petryshynets I., Buršík J., Sopko M.: Influence of New System Nano-Inhibitors on the Abnormal Grain Growth with Goss Crystallographic Orientation of Silicon Steels. Mater. Sci. Forum 783-786 (2014) 2579-2584

Čermák J., Král L.: Effect of carbon-supersaturation upon the carbon diffusion in 9Cr-1Mo ferrite steel. Mater. Lett. 116 (2014) 402-404

Falat L., Čiriprová L., Kepič J., Buršík J., Podstranská I.: Correlation between microstructure and creep performance of martensitic/austenitic transition weldment in dependence of its post-weld heat treatment. Eng. Fail. Anal. 40 (2014) 141-152

Wind J., Romaniv O., Schöllhammer G., Buršík J., Michor H., Giester G., Rogl P.: The systems Tantalum(Niobium)-Cobalt-Boron. J. Phase Equil. Diffus. 35 (2014) 43-85

Sopoušek J., Pinkas J., Brož P., Buršík J., Vykoukal V., Škoda D., Stýskalík A., Zobač O., Vřešťál J., Hrdlička A., Šimbera J.: Ag-Cu Colloid Synthesis: Bimetallic Nanoparticle Characterisation and Thermal Treatment. J. Nanomater. 2014 (2014) 638964

Sopoušek J., Vřešťál J., Pinkas J., Brož P., Buršík J., Stýskalík A., Škoda D., Zobač O., Lee J.: Cu-Ni nanoalloy phase diagram - Prediction and experiment. CALPHAD 45 (2014) 33-39

Souček P., Schmidtová T., Zábranský L., Buršíková V., Vašina P., Caha O., Buršík J., Peřina V., Mikšová R., Pei Y., De Hosson J.: On the control of mechanical properties of nc-TiC/a-C:H coatings. Surf. Coat. Technol. 255 (2014) 8-14

Buršík J., Buršíková V., Svoboda M., Král P., Dvořák J., Sklenička V.: Microstructure and local mechanical properties of Cu-Co alloys after severe plastic deformation. Key Eng. Mater. 586 (2014) 100-103

Homolová V., Repovský P., Výrostková A., Kroupa A.: Experimental and theoretical determination of phase fraction in the Fe-B-V alloys. J. Phase Equil. Diffus. 35 (2014) 172-177

Jirásková Y., Buršík J., Turek I., Hapla M., Titov A., Životský O.: Phase and magnetic studies of the high-energy alloyed Ni-Fe. J. Alloys Comp. 594 (2014) 133-140

Jirásková Y., Buršík J., Turek I., Čížek J., Procházka I.: Structural and magnetic relaxations of mechanically alloyed Fe-Mo. J. Phys. D: Appl. Phys. 47 (2014) 435001

Čermák J., Král L.: Carbon diffusion in carbon-supersaturated ferrite and austenite. J. Alloys Comp. 586 (2014) 129-135

Titov A., Životský O., Jirásková Y., Hendrych A., Buršík J., Švec P.: Infuence of Magnetostriction on Cross-Sectional Magnetic Properties in Bilayered Ribbons. IEEE Trans. Magnetics 50 (2014) 6500804

Kvapilová M., Dvořák J., Král P., Svoboda M., Sklenička V.: Application of the Monkman-Grant Relationship for Ultrafine-Grained Metallic Materials. Key Eng. Mater. 577-578 (2014) 137-140

Buršíková V., Buršík J., Zábranský L., Vašina P., Souček P., Peřina V.: Study of the Nanoindentation Induced Effects in Nanocomposite. Key Eng. Mater. 606 (2014) 159-162

Bernard V., Zobač O., Sopoušek J., Mornstein V.: AgCu Bimetallic Nanoparticles under Effect of Low Intensity Ultrasound: The Cell Viability Study In Vitro. J. Cancer Research 2014 (2014) 971769

Zobač O., Sopoušek J., Buršík J., Zemanová A., Roupcová P.: Experimental study of the Sb-Sn-Zn alloy system. Metall. Mater. Trans. A 45 (2014) 1181-1188

Sklenička V., Král P., Dvořák J., Kvapilová M., Svoboda M.: Microstructure evolution and creep behavior in ECAP processed metallic materials. Mater. Sci. Forum 783-786 (2014) 2689-2694

Štrof J., Pavlů J., Wdowik U., Buršík J., Šob M., Vřešťál J.: Laves phases in the V-Zr system below room temperature: Stability analysis using ab initio results and phase diagram. CALPHAD 44 (2014) 62-69

Zábranský L., Buršíková V., Souček P., Vašina P., Gardelka T., Sťahel P., Caha O., Peřina V., Buršík J.: Study of the thermal dependence of mechanical properties, chemical composition and structure of nanocomposite TiC/a-C:H coatings. Surf. Coat. Technol. 242 (2014) 62-67

Mrázek J., Surýnek M., Bakardijeva S., Buršík J., Kašík I.: Synthesis and crystallization mechanism of europium-titanate Eu2Ti2O7. J. Cryst. Growth 391 (2014) 25-32

Žemlička R., Jílek M., Vogl P., Souček P., Buršíková V., Buršík J., Vašina P.: Understanding of hybrid PVD-PECVD process with aim of growing hard nc-TiC/a-C:H coatings using industrial devices with a rotating cylindrical magnetron. Surf. Coat. Technol. 255 (2014) 118-123

Buršík J., Král P., Svoboda M., Dvořák J., Sklenička V.: Nanoindentation and microstructural study of Cu-Co alloys after severe plastic deformation. Key Eng. Mater. 592-593 (2014) 720-723

Kroupa A., Mishra R., Rajamohan D., Flandorfer H., Watson A., Ipser H.: Phase equilibria in the ternary Ni-Sb-Sn system: Experiments and calculations. CALPHAD 45 (2014) 151-166

Konečná R., Nicoletto G., Kunz L., Svoboda M., Bača A.: Fatigue strength degradation of AlSi12CuNiMg alloy due to high temperature exposure: a structural investigation. Procedia Eng. 74 (2014) 43-46



2013

Jirásková Y., Buršík J., Čížek J., Jančík D.: Solid-state reactions during mechanical milling of Fe-Al under nitrogen atmosphere. J. Alloys Comp. 568 (2013) 106-111

Kuběnová M., Zálešák J., Čermák J., Dlouhý A.: Impact of hydrogen-assisted heat treatments on microstructure and transformation path in a Ni-rich NiTi shape memory alloy. J. Alloys Comp. 577S (2013) 287-290

Čermák J., Král L.: Beneficial effect of carbon on hydrogen desorption kinetics from Mg-Ni-In alloy. J. Alloys Comp. 546 (2013) 129-137

Sklenička V., Kuchařová K., Kvapilová M., Svoboda M., Král P., Vidrich G.: Creep in an electrodeposited nickel. J. Mater. Sci. 48 (2013) 4780-4788

Kroupa A.: Modelling of phase diagrams and thermodynamic properties using Calphad method - Development of thermodynamic databases. Comp. Mater. Sci. 66 (2013) 3-13

Schmetterer C., Zemanová A., Flandorfer H., Kroupa A., Ipser H.: Phase equilibria in the ternary In-Ni-Sn system at 700 degrees C. Intermetallics 35 (2013) 90-97

Malík Z., Grytsiv A., Rogl P., Giester G., Buršík J.: Phase relations and structural features in the system Ni-Zn-B. J. Solid State Chem. 198 (2013) 150-161

Jirásková Y., Hendrych A., Životský O., Buršík J., Žák T., Procházka I., Janičkovič D.: Surface magneto-optical and Mössbauer observations of Fe-Al. Appl. Surf. Sci. 276 (2013) 68-75

Životský O., Klimsa L., Hendrych A., Jirásková Y., Buršík J.: A New Phenomenon on the Surface of FINEMET Alloy. J. Supercond. Novel Magn. 26 (2013) 1349-1352

Rothová V.: A simple measurement of the Ni-63 diffusion profiles by residual activity method using a liquid scintillation counter. Nucl. Instr. Meth. Phys. Res. A 729 (2013) 702-706

Dvořák J., Sklenička V., Betekhtin V., Kadomtsev A., Král P., Kvapilová M., Svoboda M.: The effect of high hydrostatic pressure on creep behaviour of pure Al and a Cu-0.2 wt% Zr alloy processed by ECAP. Mater. Sci. Eng. A 584 (2013) 103-113

Životský O., Titov A., Jirásková Y., Buršík J., Kalbáčová D., Janickovic D., Švec P.: Full-scale magnetic, microstructural, and physical properties of bilayered CoSiB/FeSiB ribbons. J. Alloys Comp. 581 (2013) 685-692

Homolová V., Výrostková A., Ciripová L., Kroupa A.: Phase analysis of Fe-B-V system. Kovové materiály 51 (2013) 135-139

Mishra R., Kroupa A., Zemanová A., Ipser H.: Phase Equilibria in the Sn-Rich Corner of the Ni-Sb-Sn System. J. Electronic Mater. 42 (2013) 646-653

Brož P., Khan A., Niu H., Chen X., Li D., Vřešťál J., Buršík J., Rogl P.: The system Ta-V-Si: Thermodynamic modeling. J. Solid State Chem. 199 (2013) 171-180

Jirásková Y., Buršík J., Turek I.: Nanostructure, Composition, and Magnetic Behavior of Mechanically Alloyed Fe-Mo. J. Supercond. Novel Magn. 26 (2013) 1717-1721



2012

Káňa T., Šob M.: Mechanical and magnetic properties of Mn-Pt compounds and nanocomposites. Phys. Rev. B 85 (2012) 214438

Mishra R., Kroupa A., Terzieff P., Ipser H.: Thermochemistry of liquid Ni-Sb-Sn alloys. Thermochimica Acta 536 (2012) 68-73

Smetana B., Zlá S., Kroupa A., Žaludová M., Drápala J., Burkovič R., Petlak D.: Phase transition temp. of Sn-Zn-Al system and their comparison with calculated phase diagrams. J. Therm. Anal. Calorim. 110 (2012) 369-378

Souček P., Vřešťál J., Zemanová A., Buršík J.: Phase diagram prediction and particle characterization of Sn-Ag nano alloy for low melting point lead-free solders. J. Mining Metall. B 48 (2012) 419-425

Milcheva N., Brož P., Buršík J., Vassilev G.: Thermochemical and phase diagram studies of the Bi-Ni-Sn system. Thermochimica Acta 534 (2012) 41-50

Meduňa M., Růžička J., Caha O., Buršík J., Svoboda M.: Precipitation in silicon wafers after high temperature preanneal studied by X-ray diffraction methods. Physica B 407 (2012) 3002-3005

Čermák J., Král L.: Improvement of hydrogen storage characteristics of Mg/Mg2Ni by alloying: Beneficial effect of In. J. Power Sources 214 (2012) 208-215

Buršík J., Buršíková V., Pešina Z., Sopoušek J.: Mechanical properties and microstructure of model lead-free joints for electronics made with use of nanopowders. Chem. Listy 106 (2012) 390-392

Čermák J., Král L.: Ageing of Mg-Ni-H hydrogen storage alloys. Int. J. Hydrogen Energy 37 (2012) 14257-14264

Khan A., Buršík J., Rogl P.: Phase relations and crystal structures in the system Ta-V-Ge. Dalton Trans. 41 (2012) 6206-6214

Mishra R., Zemanová A., Kroupa A., Flandorfer H., Ipser H.: Synthesis and characterization of Sn-rich Ni-Sb-Sn nanosolders. J. Alloys Comp. 513 (2012) 224-229

Kratochvíl P., Dobeš F., Pešička J., Málek P., Buršík J., Vodičková V., Hanus P.: Microstructure and high temperature mechanical properties of Zr-alloyed Fe3Al-type aluminides: The effect of carbon. Mater. Sci. Eng. A 548 (2012) 175-182

Kroupa A., Andersson D., Hoo N., Pearce J., Watson A., Dinsdale A., Mucklejohn S.: Current Problems and Possible Solutions in High-Temperature Lead-Free Soldering. J. Mater. Eng. and Performance 21 (2012) 629-637

Životský O., Hendrych A., Klimsa L., Jirásková Y., Buršík J., Gómez J., Janickovic D.: Surface microstructure and magnetic behavior in FeSiB amorphous ribbons from magneto-optical Kerr effect. J. Magn. Magn. Mater. 324 (2012) 569-577

Zemanová A., Kroupa A., Dinsdale A.: Theoretical assessment of the Ni-Sn system. Monatshefte für Chemie 143 (2012) 1255-1261

Zábranský L., Buršíková V., Buršík J., Vašina P., Souček P., Caha O., Jílek M., Peřina V.: Study of the indentation response of nanocomposite n-TiC/a-C:H coatings. Chem. Listy 106 (2012) 1508-1511

Souček P., Schmidtová T., Zábranský L., Buršíková V., Vašina P., Caha O., Jílek M., Mel A., Tessier P., Schäfer J., Buršík J., Peřina V., Mikšová R.: Evaluation of composition, mechanical properties and structure of nc-TiC/a-C:H coatings prepared by balanced magnetron sputtering. Surf. Coat. Technol. 211 (2012) 111-116

Meduňa M., Caha O., Buršík J.: Studies of influence of high temperature preannealing on oxygen precipitation in CZ Si wafers. J. Cryst. Growth 348 (2012) 53-59

Sopoušek J., Buršík J., Zálešák J., Pešina Z.: Silver nanoparticles sintering at low temperature on a copper substrate: in situ characterisation under inert atmosphere and air. J. Mining Metall. B 48 (2012) 63-71

Čermák J., Král L.: Alloying of Mg/Mg2Ni eutectic by chosen non-hydride forming elements: Relation between segregation of the third element and hydride storage capacity. J. Power Sources 197 (2012) 116-120

Khan A., Brož P., Niu H., Buršík J., Grytsiv A., Chen X., Giester G., Rogl P.: The system Ta-V-Si: Crystal structure and phase equilibria. J. Solid State Chem. 187 (2012) 114-123

Kroupa A., Dinsdale A., Watson A., Vřešťál J., Zemanová A., Brož P.: The Thermodynamic database COST MP0602 for materials for high-temperature lead-free soldering. J. Mining Metall. B 48 (2012) 339-346

Životský O., Jirásková Y., Hendrych A., Matějka V., Klimsa L., Buršík J.: Influence of Annealing Temperature and Atmosphere on Surface. IEEE Trans. Magnetics 48 (2012) 1367-1370

Homolová V., Kroupa A., Výrostková A.: Calculation of Fe-B-V ternary phase diagram. J. Alloys Comp. 520 (2012) 30-35



2011

Buršík J., Sopoušek J., Buršíková V., Stýskalík A., Škoda D.: Characterization of sintered Ag nanopowder joints using nanoindentation tests. Chem. Listy 105 (2011) s777-s778

Buršík J.: Elastic parameters of various rafted structures of model Ni-base alloys. Key Eng. Mater. 465 (2011) 85-88

Stratil L., Hadraba H., Buršík J., Dlouhý I.: Comparison of microstructural properties and Charpy impact behaviour between different plates of the Eurofer97 steel and effect of isothermal ageing. J. Nucl. Mater. 416 (2011) 311-317

Král P., Dvořák J., Kvapilová M., Svoboda M., Beneš V., Ponížil P., Šedivý O., Sklenička V.: Quantitative Characterization of Microstructure in Copper Processed by ECAP. Mater. Sci. Forum 667-669 (2011) 235-240

Caha O., Bernatová S., Meduňa M., Svoboda M., Buršík J.: Study of oxide precipitates in silicon using X-ray diffraction techniques. Phys. Stat. Sol. A 208 (2011) 2587-2590

Káňa T., Šob M., Vítek V.: Ab initio study of phase transformations in transition-metal disilicides. Intermetallics 19 (2011) 919-926

Černičková I., Priputen P., Liu T., Zemanová A., Illeková E., Janickovic D., Švec P., Kusý M., Čaplovič L., Janovec J.: Evolution of phases in AlePdeCo alloys. Intermetallics 19 (2011) 1586-1593

Buršík J.: Modelling of hardness distribution curves obtained on two-phase materials by grid indentation technique. Chem. Listy 105 (2011) s660-s663

Vašina P., Souček P., Schmidtová T., Eliáš M., Buršíková V., Jílek M., Jílek M., Schäfer J., Buršík J.: Depth profile analyses of nc-TiC/a-C:H coating prepared by balanced magnetron sputtering. Surf. Coat. Technol. 205 (2011) S53-S56

Gandova V., Brož P., Buršík J., Vassilev G.: Thermochemical and phase diagram studies of the Sn-Zn-Ni system. Thermochimica Acta 524 (2011) 47-55

Priputen P., Černičková I., Kusý M., Llleková E., Švec P., Buršík J., Svoboda M., Dolinšek J., Janovec J.: A study of phase transformations in complex metallic alloys Al 73Mn23Pd4and Al73Mn 21Pd6. Key Eng. Mater. 465 (2011) 302-305

Kvapilová M., Kuchařová K., Sklenička V., Svoboda M., Hrbáček K.: Creep behaviour and microstructure changes of model cast Ni-Cr-W-C alloys. Procedia Eng. 10 (2011) 839-844

Khan A., Buršík J., Grytsiv A., Pomjakushin V., Effenberger H., Rogl P.: Crystal structure of t5-TiNi2-xAl5 (x = 0.48) and isotypic {Zr,Hf}Ni2-xAl5-y. Intermetallics 19 (2011) 1340-1347

Káňa T., Šob M., Vítek V.: Transformation paths in transition-metal disilicides. Key Eng. Mater. 465 (2011) 61-64

Falat L., Výrostková A., Svoboda M., Milkovič O.: The influence of PWHT regime on microstructure and creep rupture behaviour of dissimilar T92/TP316H ferritic/austenitic welded joints. Kovové materiály 49 (2011) 417-426

Jirásková Y., Buršík J., Tuček J.: Phase and microstructural analysis of hot rolled FeNi42 sheet, its response in magnetic and mechanical properties. Steel Res. Int. 82 (2011) 898-904

Čermák J., David B.: Catalytic effect of Ni, Mg2Ni and Mg2NiH4 upon hydrogen desorption from MgH2. Int. J. Hydrogen Energy 36 (2011) 13614-13620

Buršíková V., Bláhová O., Karásková M., Zajíčková L., Jašek O., Franta D., Klapetek P., Buršík J.: Mechanical properties of ultrananocrystalline thin films deposited using dual frequency discharges. Chem. Listy 105 (2011) s98-s101

Sopoušek J., Buršík J., Zálešák J., Buršíková V., Brož P.: Interaction of silver nanopowder with copper substrate. Sci. Sintering 43 (2011) 33-38