Ústav fyziky materiálů AV ČR, v. v. i. > Institute of Physics of Materials > Publications

2021

Heczko M., Mazánová V., Gröger R., Záležák T., Hooshmand M., George E., Mills M., Dlouhý A.: Elemental segregation to lattice defects in the CrMnFeCoNi high-entropy alloy during high temperature exposures. Acta Mater. 208 (2021) 116719

Heep L., Schwalbe C., Heinze C., Dlouhý A., Rae C., Eggeler G.: Dislocation networks in gamma/gamma?-microstructures formed during selective laser melting of a Ni-base superalloy. Scr. Mater. 190 (2021) 121-125

Fintová S., Kuběna I., Jarý M., Luptáková N., Stratil L., Šiška F., Svoboda J.: Creep properties of heat-treated Fe-Al-O ODS alloy. Kovové materiály 59 (2021) 39-50

Sklenička V., Král P., Kuchařová K., Kvapilová M., Dvořák J., Kloc L.: Thermal creep fracture of a Zr1%/Nb cladding alloy in the ? and ( ?+ ?) phase regions. J. Nucl. Mater. 553 (2021) 152950



2020

Gröger R., Vítek V., Dlouhý A.: Effective pair potential for random fcc CoCrFeMnNi alloys. Model. Simul. Mater. Sci. Eng. 28 (2020) 075006

Kunčická L., Kocich R.: Correlating Structure and Electrical Properties in Rotary Swaged Al/Cu Clad Composites. Key Eng. Mater. 865 (2020) 85-90

Drexler A., Siegl W., Ecker W., Tkadletz M., Kloesch G., Schnideritsch H., Mori G., Svoboda J., Fischer F.: Cycled hydrogen permeation through Armco iron - A joint experimental and modeling approach. Corros. Sci. 176 (2020) 109017

Scheiber D., Jechtl T., Svoboda J., Fischer F., Romaner L.: On solute depletion zones along grain boundaries during segregation. Acta Mater. 182 (2020) 100-107

Fintová S., Kuběna I., Luptáková N., Jarý M., Šmíd M., Stratil L., Šiška F., Svoboda J.: Development of advanced Fe-Al-O ODS alloy microstructure and properties due to heat treatment. J. Mater. Res. 35 (2020) 2789-2797

Sklenička V., Král P., Kuchařová K., Kvapilová M., Dvořák J.: DAMAGE AND FRACTURE IN CREEP OF A CLADDING ALLOY ZR1%NB OF THE VVER REACTOR-TYPE. Zvyšování životnosti komponent energetických zařízení v elektrárnách 15. (2020) 147-152

Hackl K., Fischer F., Svoboda J.: On the treatment of non-reciprocal rate-independent kinetics via thermodynamic extremal principles. Journal of the Mechanics and Physics of Solids 145 (2020) 104149

Schneider M., George E., Manescau T., Záležák T., Hunfeld J., Dlouhý A., Eggeler G., Laplanche G.: Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy. Int. J. Plast. 124 (2020) 155-169

Khalaj O., Saebnoori E., Jirková H., Chocholaty O., Svoboda J.: High Temperature and Corrosion Properties of A Newly Developed Fe-Al-O Based OPH Alloy. Metals 10 (2020) 167

Stratil L., Horník V., Dymáček P., Roupcová P., Svoboda J.: The Influence of Aluminum Content on Oxidation Resistance of New-Generation ODS Alloy at 1200°C. Metals 10 (2020) 1478

Svoboda J., Kunčická L., Luptáková N., Weiser A., Dymáček P.: Fundamental Improvement of Creep Resistance of New-Generation Nano-Oxide Strengthened Alloys via Hot Rotary Swaging Consolidation. Materials 13 (2020) 5217

Bürger D., Dlouhý A., Yoshimi K., Eggeler G.: How Nanoscale Dislocation Reactions Govern Low-Temperature and High-Stress Creep of Ni-Base Single Crystal Superalloys. Crystals 10 (2020) 134

Gamsjäger E., Gschoepf ., Svoboda J.: Influence of Finite Mobilities of Triple Junctions on the Grain Morphology and Kinetics of Grain Growth. Metals 10 (2020) 185

Khalaj O., Saebnoori E., Jirková H., Chocholaty O., Kučerová L., Hajšman J., Svoboda J.: The Effect of Heat Treatment on the Tribological Properties and Room Temperature Corrosion Behavior of Fe-Cr-Al-Based OPH Alloy. Materials 13 (2020) 5465

Dymáček P., Dobeš F., Jarý M., Jirásková Y., Pizúrová N., Friák M.: Small punch testing of Fe-Al based alloys with Ti and Nb additions. IOP Conf. Ser.: Mater. Sci. Eng. 723 (2020) 012006

Chlupová A., Heczko M., Obrtlík K., Dlouhý A., Kruml T.: Effect of heat-treatment on the microstructure and fatigue properties of lamellar gama-TiAl alloyed with Nb, Mo and/or C. Mater. Sci. Eng. A 786 (2020) 139427

Bürger D., Dlouhý A., Yoshimi K., Eggeler G.: On the stress and temperature dependence of low temperature and high stress shear creep in Ni-base single crystal superalloys. Mater. Sci. Eng. A 795 (2020) 139961

Svoboda J., Shan Y., Zickler G., Kozeschnik E., Fischer F.: Local approach for coarsening of precipitates. Scr. Mater. 178 (2020) 232-235

Král P., Dvořák J., Blum W., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kunčická L., Kocich R., Kvapilová M., Svobodová M.: The Effect of Predeformation on Creep Strength of 9% Cr Steel. Materials 13 (2020) 5330

Sklenička V., Král P., Dvořák J., Takizawa Y., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.: Effects of Grain Refinement and Predeformation Impact by Severe Plastic Deformation on Creep in P92 Martensitic Steel. Adv. Eng. Mater. 22 (2020) 1900448

Zhong J., Song M., Guan K., Dymáček P.: Application of a database in the evaluation of strengths of Cr-Mo steels by means of small punch test. Int. J. Mech. Sci. 166 (2020) 105195

Chlupová A., Šulák I., Svoboda J.: High Temperature Cyclic Plastic Response of New-Generation ODS Alloy. Metals 10 (2020) 804

Veverková J., Bártková D., Weiser A., Dlouhý A., Babula P., Stepka P., Goldbergová M.: Effect of Ni ion release on the cells in contact with NiTi alloys. Environ Sci Pollut R 27 (2020) 7934-7942

Svoboda J., Holec D., Popov M., Zickler G., Fischer F.: Modelling of short-range ordering kinetics in dilute multicomponent substitutional solid solutions. Philos. Mag. 2020 (2020) 1-20

Sklenička V., Kuchařová K., Kvapilová M., Kloc L., Dvořák J., Král P.: High-Temperature Creep Tests of Two Creep-Resistant Materials at Constant Stress and Constant Load. Key Eng. Mater. 827 (2020) 246-251

Bulutsuz A., Chrominski W., Huang Y., Král P., Yurci M., Lewandowska M., Langdon T.: A Comparison of Warm and Combined Warm andLow-Temperature Processing Routes for the Equal-ChannelAngular Pressing of Pure Titanium. Adv. Eng. Mater. 22 (2020) 1900698

Král P., Blum W., Dvořák J., Yurchenko N., Stepanov N., Zherebtsov S., Kunčická L., Kvapilová M., Sklenička V.: Creep behavior of an AlTiVNbZr0.25 high entropy alloy at 1073 K. Mater. Sci. Eng. A 783 (2020) 139291

Svoboda J., Luptáková N., Jarý M., Dymáček P.: Influence of Hot Consolidation Conditions and Cr-Alloying on Microstructure and Creep in New-Generation ODS Alloy at 1100 °C. Materials 13 (2020) 5070

Kunčická L., Kocich R., Klečková Z.: Effects of Sintering Conditions on Structures and Properties of Sintered Tungsten Heavy Alloy. Materials 13 (2020) 2338

Kunčická L., Kocich R.: Sub-Structure and Residual Stress in Rotary Swaged Cu/Al Clad Composite Wires. Key Eng. Mater. 865 (2020) 7-12

Kunčická L., Macháčková A., Lavery N., Kocich R., Cullen J., Hlaváč L.: Effect of thermomechanical processing via rotary swaging on properties and residual stress within tungsten heavy alloy. International Journal of Refractory Metals and Hard Materials 87 (2020) 105120

Sklenička V., Kuchařová K., Svoboda M., Král P., Kvapilová M., Dvořák J.: The Creep Resistance of Short-Fibre Reinforced Metal Matrix Composites. Structural. Integr. 16 (2020) 93-99

Král P., Dvořák J., Sklenička V., Horita Z., Takizawa Y., Tang Y., Kvapilová M., Svobodová M.: Effect of ultrafine-grained microstructure on creep behaviour in 304L austenitic steel. Mater. Sci. Eng. A 785 (2020) 139383

Kunčická L., Macháčková A., Petrmichl R., Klečková Z., Marek M.: Optimizing Induction Heating of WNiCo Billets Processed via Intensive Plastic Deformation. Applied Sciences 10 (2020) 8125

Kunčická L., Klečková Z.: Structure Characteristics Affected by Material Plastic Flow in Twist Channel Angular Pressed Al/Cu Clad Composites. Materials 13(18) (2020) 4161

Kocich R., Kunčická L.: Special Issue: Mechanical Properties in Progressive Mechanically Processed Metallic Materials. Materials 13 (2020) 4668

Kunčická L., Kocich R.: Effect of Swaging Temperature on Deformation Behaviour of W93Ni6Co1 tungsten Heavy Alloy. Key Eng. Mater. 865 (2020) 91-96

Dobeš F., Dymáček P., Friák M.: Creep of Heusler-type alloy Fe-25Al-25Co. Crystals 10 (2020) 52

Dobeš F., Dymáček P.: Creep behavior of AJ62 Magnesium-Aluminum-Strontium alloy. Journal of Magnesium and Alloys 8 (2020) 414-420

Hackl K., Fischer F., Zickler G., Svoboda J.: Are Onsager's reciprocal relations necessary to apply Thermodynamic Extremal Principles? . J. Mech. Phys. Solids 135 (2020) 103780

Svoboda J., Kunčická L., Luptáková N., Weiser A., Dymáček P.: Fundamental Improvement of Creep Resistance of New-Generation Nano-Oxide Strengthened Alloys via Hot Rotary Swaging Consolidation. Materials 13 (2020) 5217

Svoboda J., Horník V., Riedel H.: Modelling of Processing Steps of New Generation ODS Alloys. Metall. Mater. Trans. A 51 (2020) 5296-5305



2019

Kvapilová M., Dvořák J., Král P., Hrbáček K., Sklenička V.: Creep behaviour and life assessment of a cast nickel - base superalloy MAR - M247. High Temp. Mater. Proc. 38 (2019) 590-600

Dymáček P., Bártková D., Horník V., Stratil L., Mašek B., Svoboda J.: New Generation of ODS Alloys. Key Eng. Mater. 810 (2019) 113-118

Svoboda J., Riedel H.: Modeling of spontaneous transformation of nitrides to Z phase accounting for stress relaxation by diffusion and interface activity. Comp. Mater. Sci. 161 (2019) 24-34

Král P., Dvořák J., Sklenička V., Langdon T.: The Characteristics of Creep in Metallic Materials Processed by Severe Plastic Deformation. Mater. Trans. 60 (2019) 1506-1517

Dymáček P., Dobeš F., Andrés D.: Notch sensitivity of Sanicro 25 in small punch creep test. Theor. Appl. Fract. Mech. 100 (2019) 383-389

Král P., Staněk J., Kunčická L., Seitl F., Petrich L., Schmidt V., Beneš V., Sklenička V.: Microstructure changes in HPT-processed copper occurring at room temperature. Mater. Character. 151 (2019) 602-611

Dobeš F., Dymáček P., Komazaki S., Li Y.: Towards the development of a universal formula for conversion of Small Punch data to Conventional Creep data. Proc. 10th Japan-China Symp. High Temp. Strength of Mater. - (2019) 370-373

Kunčická L., Král P., Dvořák J., Kocich R.: WE43 BIOCOMPATIBLE ALLOY AFTER SEVERE PLASTIC DEFORMATION: STRUCTURE CHARACTERIZATION. METAL 2019 Conf. Proc. 1 (2019) 1284-1290

Dobeš F., Dymáček P., Friák M.: The Influence of Niobium Additions on Creep Resistance of Fe-27 at. % Al Alloys. Metals 9 (2019) 739

Kloc L., Sklenička V., Dymáček P.: Transient Effects in Creep of Sanicro 25 Austenitic Steel and Their Modelling. Metals 9 (2019) 245

Svoboda J., Shan Y., Kozeschnik E., Fischer F.: Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates. Scr. Mater. 168 (2019) 81 -85

Hackl K., Khan A., Fischer F., Svoboda J.: Influence of bulk energy and triple junction mobility on interface kinetics - A tool for interpretation of experiments. Acta Mater. 174 (2019) 310-318

Málek J., Zýka J., Lukáč F., Čížek J., Kunčická L., Kocich R.: Microstructure and Mechanical Properties of Sintered and Heat-Treated HfNbTaTiZr High Entropy Alloy. Metals 9(12) (2019) 1324

Dymáček P., Svoboda J., Jirková H., Stratil L., Horník V.: Microstructure evolution and creep strength of new-generation oxide dispersion strengthened alloys with high volume fraction of nano-oxides. Procedia Struct. Integr. 17 (2019) 427-433

Olina A., Píška M., Petrenec M., Hervoches C., Beran P., Pechoušek J., Král P.: Assessment of Retained Austenite in Fine Grained Inductive Heat Treated Spring Steel. Materials 12 (2019) 4063

Schneider M., George E., Manescau T., Záležák T., Hunfeld J., Dlouhý A., Eggeler G., Laplanche G.: Benchmark dataset of the effect of grain size on strength in the single-phase FCC CrCoNi medium entropy alloy. Data in Brief 27 (2019) 104592

Dymáček P., Dobeš F., Jirásková Y., Pizúrová N., Friák M.: Tensile, creep and fracture testing of prospective Fe-Al-based alloys using miniature specimens. Theor. Appl. Fract. Mech. 99 (2019) 18-26

Dobeš F., Dymáček P., Hasegawa M., Iwashita M.: High-temperature creep of a CoNiCrAlY bond coat alloy. Mater. Sci. Eng. A 759 (2019) 272-277

Watanabe K., Ashida M., Masuda T., Král P., Takizawa Y., Yumoto M., Otagiri Y., Sklenička V., Hanawa T., Horita Z.: Production of Superplastic Ti­6Al­7Nb Alloy Using High-Pressure Sliding Process. Mater. Trans. 60 (2019) 1785-1791

Hasegawa M., Iwashita M., Kubota Y., Dymáček P., Dobeš F.: Microstructure evolution under high temperature deformation of CoNiCrAlY bond coat alloy. Mater. Sci. Eng. A 756 (2019) 237-247

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Strain Rate Contribution due to Dynamic Recovery of Ultrafine-Grained Cu-Zr as Evidenced by Load Reductions during Quasi-Stationary Deformation at 0.5 Tm. Metals 9 (2019) 1150

Luptáková N., Dymáček P., Jarý M., Záležák T.: Failure analysis of a gripping assembly loaded at temperatures above 1000 °C. Eng. Fail. Anal. 96 (2019) 384-393

Kamarad J., Friák M., Kastil J., Schneeweiss O., Šob M., Dlouhý A.: Effect of high pressure on magnetic properties of CrMnFeCoNi high entropy alloy. J. Magn. Magn. Mater. 487 (2019) 165333

Král P., Kvapilová M., Sklenička V., Zýka J., Čmakal J., Hrbáček K.: Microstructure and damage processes in a nickel-based alloy exposed to molten glass. Procedia Struct. Integr. 23 (2019) 287-292

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Quasi-Stationary Strength of ECAP-Processed Cu-Zr at 0.5 Tm. Metals 9 (2019) 1149

Kunčická L., Kocich R., Ryukhtin V., Cullen J., Lavery N.: Study of structure of naturally aged aluminium after twist channel angular pressing. Mater. Character. 152 (2019) 94-100

Sklenička V., Kuchařová K., Svoboda M., Kvapilová M., Král P., Dvořák J.: Creep behaviour of IN 740 alloy after HAZ thermal cycle simulations. Int. J. Pres. Ves. Pip. 178 (2019) 104000

Kunčická L., Král P., Dvořák J., Kocich R.: Texture Evolution in Biocompatible Mg-Y-Re Alloy After Friction Stir Processing. Metals 9(11) (2019) 1181

Svoboda J., Ecker W., Razumovskiy V., Zickler G., Fischer F.: Kinetics of interaction of impurity interstitials with dislocations revisited. Prog. Mater. Sci. 101 (2019) 172-206

Horst O., Ruttert B., Bürger D., Heep L., Wang H., Dlouhý A., Theisen W., Eggeler G.: On the rejuvenation of crept Ni-Base single crystal superalloys (SX) by hot isostatic pressing (HIP). Mater. Sci. Eng. A 758 (2019) 202-214

Weiser A., Buršíková V., Jarý M., Dymáček P., Dugáček J., Frenzel J., Čermák J., Dlouhý A.: Strength of hydrogen-free and hydrogen-doped Ni50Ti50 shape memory platelets . Scr. Mater. 162 (2019) 151-155

Kvapilová M., Sklenička V., Král P., Dvořák J.: High Temperature Creep Properties of Cast Cobalt-Based Superalloys: A Comparison. Procedia Struct. Integr. 8 (2019) 39-44

Dymáček P., Li Y., Dobeš F., Stevens P.: New approach to determine uniaxial creep properties from small punch creep curves. Materials at High Temperatures 36 (2019) 157-164

Kunčická L., Macháčková A., Krátká L., Kocich R.: Analysis of Deformation Behaviour and Residual Stress in Rotary Swaged Cu/Al Clad Composite Wires. Materials 12 (2019) 3462

Kunčická L., Kocich R., Dvořák K., Macháčková A.: Rotary swaged laminated Cu-Al composites: Effect of structure on residual stress and mechanical and electric properties. Mater. Sci. Eng. A 742 (2019) 743-750

Dvořák J., Sklenička V., Král P., Kvapilová M., Svobodová M., Šifner J., Koula V.: DETEKCE PORUCH POMOCÍ AKUSTICKÉ EMISE (AE) V PODMÍNKÁCH VYSOKOTEPLOTNÍHO CREEPU. Zvyšování životnosti komponent energetických zařízení v elektrárnách 14 (2019) 75-80



2018

Svoboda J., Fischer F.: Influence of accounting for translationa lmotion of grains on grain growth kinetics and size distribution. Scr. Mater. 146 (2018) 255-259

Dvořák J., Král P., Kvapilová M., Hrbáček K., Sklenička V.: HIGH - TEMPERATURE CREEP BEHAVIOUR OF CAST COBALT-BASE SUPERALLOYS. METAL 2018 Conf. Proc. 2018 (2018) 530-535

Svoboda J., Horník V., Stratil L., Hadraba H., Mašek B., Khalaj O., Jirková H.: Microstructure Evolution in ODS Alloys with a High-Volume Fraction of Nano Oxides. Metals 8 (2018) 1079

Král P., Sklenička V., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.: Microstructure and creep behaviour of P92 steel after HPT. Mater. Sci. Eng. A 723 (2018) 287-295

Dobeš F., Hadraba H., Chlup Z., Dlouhý A., Vilémová M., Matějíček J.: Compressive creep behavior of an oxide-dispersion-strengthened CoCrFeMnNi high-entropy alloy. Mater. Sci. Eng. A 732 (2018) 99-104

Kloc L., Dymáček P., Sklenička V.: High temperature creep of Sanicro 25 austenitic steel at low stresses. Mater. Sci. Eng. A 722 (2018) 88-92

Kloc L., Sklenička V., Dymáček P., Plešek J.: New creep constitutive equation for finite element modelling including transient effects. Mech. Mater. 119 (2018) 49-55

Svoboda J., Zickler G., Fischer F.: An innovative concept for interstitial diffusion in stressed crystals. Int. J. Solids Struct. 134 (2018) 173-180

Záležák T., Šiška F., Stratil L., Fintová S., Horník V., Bártková D., Husák R., Svoboda J., Dlouhý A.: An integration of 3D discrete dislocation dynamics with numerical tensile testing. Acta Phys. Pol. A 134 (2018) 777-780

Gamsjäger E., Ogris D., Svoboda J.: Kinetics of Grain Boundary Networks Controlled by Triple Junction and Grain Boundary Mobility. Metals 8 (2018) 977

Sklenička V., Kuchařová K., Svobodová M., Král P., Kvapilová M., Dvořák J.: The effect of a prior short-term ageing on mechanical and creep properties of P92 steel. Mater. Character. 136 (2018) 388-397

Sklenička V., Kvapilová M., Král P., Dvořák J., Svoboda M., Podhorná B., Zýka J., Hrbáček K., Joch A.: Degradation processes in high-temperature creep of cast cobalt-based superalloys. Mater. Character. 144 (2018) 479-489

Fischer F., Zickler G., Svoboda J.: Elastic stress-strain analysis of an infinite cylindrical inclusion with eigenstrain. Arch. Appl. Mech. 88 (2018) 453-460

Válková L., Ševčíková J., Pávková Goldbergová M., Weiser A., Dlouhý A.: Osteoarthritic process modifies expression response to NiTi alloy presence. J. Mater. Sci. Mater. M. 29 (2018) 146

Fischer F., Zickler G., Svoboda J.: Stress-strain analysis of the antiplane shear problem for an infinite cylindrical inclusion with eigenstrain an addendum to Arch. Appl. Mech. 2018. Arch. Appl. Mech. 88 (2018) 1209-1211

Ševčíková J., Bártková D., Goldbergová M., Kuběnová M., Čermák J., Frenzel J., Weiser A., Dlouhý A.: On the Ni-Ion release rate from surfaces of binary NiTi shape memory alloys. Appl. Surf. Sci. 427 (2018) 434-443

Sklenička V., Kuchařová K., Kvapilová M., Kloc L., Dvořák J., Král P.: Interrelationship between Creep Deformation and Damage for Advanced Creep-Resistant Steels. Key Eng. Mater. 774 (2018) 119-124

Dymáček P., Jarý M., Dobeš F., Kloc L.: Tensile and Creep Testing of Sanicro 25 Using Miniature Specimens. Materials 11 (2018) 142

Eggeler G., Wieczorek ., Fox F., Berglund S., Bürger D., Dlouhý A., Wollgramm P., Neuking K., Schreuer J., Jácome L., Gao S., Hartmaier A., Laplanche G.: On Shear Testing of Single Crystal Ni-Base Superalloys. Metall. Mater. Trans. A 49A (2018) 3951-3962

Kvapilová M., Podhorná B., Dvořák J., Král P., Zýka J., Hrbáček K., Sklenička V.: Creep Damage Mechanisms in Cast Cobalt Superalloys for Applications in Glass Industry. Key Eng. Mater. 774 (2018) 173-178

Dobeš F., Dymáček P., Friák M.: Force-to-Stress Conversion Methods in Small Punch Testing Exemplified by Creep Results of Fe-Al Alloy with Chromium and Cerium Additions. IOP Conf. Ser.: Mater. Sci. Eng. 461 (2018) 012017

Kocich R., Kunčická L., Král P., Strunz P.: Characterization of innovative rotary swaged Cu-Al clad composite wire conductors. Mater. & Design 160 (2018) 828-835

Wu X., Dlouhý A., Eggeler Y., Spiecker E., Kostka A., Somsen C., Eggeler G.: On the nucleation of planar faults during low temperature and high stress creep of single crystal Ni-base superalloys. Acta Mater. 144 (2018) 642-655

Khalaj O., Jirková H., Mašek B., Hassasroudsari P., Studecký T., Svoboda J.: Using thermomechanical treatments to improve the grain growth of new-generation ODS alloys. Mater. Technol. 52 (2018) 475-482

Šiška F., Stratil L., Hadraba H., Fintová S., Kuběna I., Horník V., Husák R., Bártková D., Záležák T.: Strengthening mechanisms of different oxide particles in 9Cr ODS steel at high temperatures. Mater. Sci. Eng. A 732 (2018) 112-119

Scheiber D., Romaner L., Fischer F., Svoboda J.: Kinetics of grain boundary segregation in multicomponent systems - The example of a Mo-C-B-O system. Scr. Mater. 150 (2018) 110-114

Dobeš F., Dymáček P., Friák M.: Small punch creep of Fe-Al-Cr alloy with Ce addition and its relation to uniaxial creep tests. Kovové materiály 56 (2018) 205-212

Blum W., Dvořák J., Král P., Sklenička V.: Dynamic grain coarsening in creep of pure Cu at 0.42Tm after predeformation by ECAP. Mater. Sci. Eng. A 731 (2018) 520-529

Holmström S., Li Y., Dymáček P., Vacchieri E., Jeffs S., Lancaster R., Omacht D., Kuboň Z., Anelli E., Rantala J., Tonti A., Komazaki S., Naveena ., Bruchhausen M., Hurst R., Hähner P., Richardson M., Andrés D.: Creep strength and minimum strain rate estimation from Small Punch Creep tests. Mater. Sci. Eng. A 731 (2018) 161-172

Sklenička V., Kuchařová K., Svoboda M.: Creep behaviour and microstructure evolution of advanced creep-resistant 9%Cr martensitic steels under cyclic thermal loading. Kovové materiály 56 (2018) 1-13

Král P., Dvořák J., Sklenička V., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.: The Effect of Ultrafine-Grained Microstructure on Creep Behaviour of 9% Cr Steel. Materials 11 (2018) 787

Svoboda J., Fischer F.: Anisotropy of interstitial diffusion in bcc-crystals due to stress-induced unequal occupancies of different types of sites. Int. J. Solids Struct. 152-153 (2018) 66-70



2017

Král P., Blum W., Dvořák J., Eisenlohr P., Petrenec M., Sklenička V.: Dynamic restoration of severely predeformed, ultrafine-grained pure Cu at 373 K observed in situ. Mater. Character. 134 (2017) 329-334

Sklenička V., Kuchařová K., Král P., Kvapilová M., Dvořák J.: Applicability of empirical formulas and fractography for assessment of creep life and creep fracture modes of tempered martensitic 9%Cr steel. Kovové materiály 55 (2017) 69-80

Fischer F., Zickler G., Svoboda J.: Modelling of grain refinement driven by negative grain boundary energy. Philos. Mag. 97 (2017) 1963-1977

Bártková D., Šmíd M., Mašek B., Svoboda J., Šiška F.: Kinetic study of static recrystallization in an Fe-Al-O ultra-fine-grained nanocomposite. Philos. Mag. Lett. 97 (2017) 379-385

Záležák T., Šiška F., Stratil L., Luptáková N., Šmíd M., Bártková D., Svoboda J., Dlouhý A.: A Numerical Analysis of Deformation Processes in Oxide Dispersion-Strengthened Materials - Influence of Dislocation-Particle Interactions. Solid State Phenom. 258 (2017) 106-109

Čelko L., Jech D., Dvořák J., Šulák I., Klakurková L., Obrtlík K.: Durability of Amorphous and Crystalline BMAS Thermal Barrier Coatings Produced by Plasma Spraying. Solid State Phenom. 258 (2017) 383-386

Svoboda J., Fischer F., Kozeschnik E.: Thermodynamic modelling of irreversible processes. EMU Notes Mineral. 16 (2017) 181-214

Andrés D., Dymáček P., Lacalle R., Alvarez J.: Influence of the Upper Die and of the Indenter Material on the Time to Rupture of Small Punch Creep Tests. Key Eng. Mater. 734 (2017) 119-127

Blum W., Král P., Dvořák J., Petrenec M., Eisenlohr P., Sklenička V.: In situ study of thermally activated flow and dynamic restoration of ultrafine-grained pure Cu at 373 K. J. Mater. Res. 32 (2017) 1-8

Král P., Sklenička V., Kuchařová K., Svobodová M., Kvapilová M., Dvořák J.: Development of Creep Damage in Similar Weld Joints of P92 Steel Pipe. Solid State Phenom. 270 (2017) 162-167

Král P., Dvořák J., Kvapilová M., Blum W., Sklenička V.: The influence of long-term annealing at room temperature on creep behaviour of ECAP-processed copper. Mater. Lett. 188 (2017) 235-238

Záležák T., Svoboda J., Dlouhý A.: High temperature dislocation processes in precipitation hardened crystals investigated by a 3D discrete dislocation dynamics. Int. J. Plast. 97 (2017) 1-23

Dymáček P., Dobeš F., Kloc L.: Small Punch Testing of Sanicro 25 Steel and its Correlation with Uniaxial Tests. Key Engineering Materials. Key Eng. Mater. 734 (2017) 70-76

Sklenička V., Kuchařová K., Kvapilová M., Svoboda M., Král P., Dvořák J.: Creep properties of simulated heat-affected zone of HR3C austenitic steel. Mater. Character. 128 (2017) 238-247

Sklenička V., Kuchařová K., Kvapilová M., Král P., Dvořák J.: Combination of Experiments and Continuum Damage Mechanics Approach for Prediction of Creep Fracture in an Advanced 9%Cr Steel. Solid State Phenom. 258 (2017) 591-594

Svoboda J., Fischer F.: Incorporation of vacancy generation/annihilation into reactive diffusion concept - Prediction of possible Kirkendall porosity. Comp. Mater. Sci. 127 (2017) 136-140

Dymáček P., Dobeš F., Kloc L.: Determination of Mechanical Properties of Metallic Materials from Very Small Volumes by Means of Small Punch Test. Key Eng. Mater. 741 (2017) 116-121

Hadraba H., Chlup Z., Dlouhý A., Dobeš F., Roupcová P., Vilémová M., Matějíček J.: Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy. Mater. Sci. Eng. A 689 (2017) 252-256

Fischer F., Zickler G., Svoboda J.: Calibration of phase field parameters demonstrated on kinetics of a shrinking single grain. Philos. Mag. Lett. 97 (2017) 92-100

Schneeweiss O., Friák M., Dudová M., Holec D., Šob M., Kriegner D., Holý V., Beran P., George E., Neugebauer J., Dlouhý A.: Magnetic properties of the CrMnFeCoNi high-entropy alloy. Phys. Rev. B 96 (2017) 014437

Betekhtin V., Kadomtsev A., Narykova M., Amosová O., Sklenička V.: Defect Structure and Mechanical Stability of Microcrystalline Titanium . Technical Phys. Lett. 43 (2017) 38-44

Šiška F., Stratil L., Hadraba H., Fintová S., Kuběna I., Záležák T., Bártková D.: High temperature deformation mechanisms in the 14% Cr ODS alloy. Mater. Sci. Eng. A 689 (2017) 34-39

Čermák J., Král P., Roupcová P.: Improvement of hydrogen storage kinetics in ball-milled magnesium doped with antimony. Int. J. Hydrogen Energy 42 (2017) 6144-6151

Rebhan B., Svoboda J., Panholzer M.: A thermodynamic study of voiding phenomena in Cu-Cu thermo-compression wafer bonding. Microsys. Technol. 1 (2017) 1-8

Sklenička V., Kuchařová K., Dvořák J., Kvapilová M., Král P.: Creep Damage Tolerance Factor delta of Selected Creep-Resistant Steels. Key Eng. Mater. 754 (2017) 47-50

Betekhtin V., Sklenička V., Kadomtsev A., Kolobov Y., Narykova M.: Defect Structure and Thermomechanical Stability of Nano- and Microcrystalline Titanium Obtained by Different Methods of Intense Plastic Deformation. Physics of the Solids 59 (2017) 960-966

Hackl K., Fischer F., Svoboda J.: A variational approach to the modelling of grooving in a three-dimensional setting. Acta Mater. 129 (2017) 331-342

Dobeš F., Dymáček P.: Estimation of Anisotropy of Creep Properties in Al and Mg Alloys by Means of Small Punch Test. Key Eng. Mater. 734 (2017) 137-143

Takizawa Y., Kajita T., Král P., Masuda T., Watanabe K., Yumoto M., Otagiri Y., Sklenička V., Horita Z.: Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS). Mater. Sci. Eng. A 682 (2017) 603-612



2016

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Effects of Grain Refinement by ECAP on the Deformation Resistance of Al Interpreted in Terms of Boundary-Mediated Processes. J. Mater. Sci. Technol. 32 (2016) 1309-1320

Kunčická L., Kočích R., Král P., Pohludka M., Marek M.: Effect of strain path on severely deformed aluminium. Mater. Lett. 180 (2016) 280-283

Spusta T., Svoboda J., Maca K.: Study of pore closure during pressure-less sintering of advanced oxide ceramics. Acta Mater. 155 (2016) 347-353

Kočích R., Kunčická L., Král P., Lowe T.: Texture, deformation twinning and hardening in a newly developed Mg-Dy-Al-Zn-Zr alloy processed with high pressure torsion. Mater. & Design 90 (2016) 1092-1099

Svoboda J., Shan Y., Kozeschnik E., Fischer F.: A thermokinetic model for Mg-Si couple formation in Al-Mg-Si alloys. Model. Simul. Mater. Sci. Eng. 24 (2016) 1-16

Luptáková N., Dymáček P., Pešlová F., Jurkovič Z., Barborák O., Stodola J.: Impact of residual elements on zinc quality in the production of zinc oxide. Metalurgija 55 (2016) 407-410

Dobeš F., Vodičková V., Veselý J., Kratochvíl P.: The Effect of Carbon Additions on the Creep Resistance of Fe-25Al-5Zr Alloy. Metall. Mater. Trans. A 47 (2016) 6070-6076

Fischer F., Hackl K., Svoboda J.: Improved thermodynamic treatment of vacancy-mediated diffusion and creep. Acta Mater. 108 (2016) 347-354

Dobeš F., Pešička J., Kratochvíl P.: Creep of Fe3Al-based alloys with vanadium and carbon additions. Intermetallics 74 (2016) 60-64

Abart R., Svoboda J., Jeřábek P., Povoden-Karadeniz E., Habler G.: Interlayer growth kinetics of a binary solid-solution based on the thermodynamic extremal principle: Application to the formation of spinelat periclase-corundum contacts. Amer. J. Sci. 316 (2016) 309-328

Král P., Dvořák J., Jäger A., Kvapilová M., Horita Z., Sklenička V.: Creep properties of aluminium processed by ECAP. Kovové materiály 54 (2016) 441-451

Svoboda J., Fischer F.: A self-consistent model for thermodynamics of multicomponent. Scr. Mater. 126 (2016) 154-157

Šiška F., Stratil L., Šmíd M., Luptáková N., Záležák T., Bártková D.: Deformation and fracture behavior of the P91 martensitic steel at high temperatures. Mater. Sci. Eng. A 672 (2016) 1-6

Sklenička V., Kuchařová K., Svobodová M., Kvapilová M., Král P., Horváth L.: Creep properties in similar weld joint of a thick-walled P92 steel pipe. Mater. Character. 119 (2016) 1-12

Křižík P., Balog M., Nosko M., Riglos M., Dvořák J., Bajana O.: Ultrafine-grained Al composites reinforced with in-situ Al3Ti filaments. Mater. Sci. Eng. A 657 (2016) 6-14

Fischer F., Svoboda J., Antretter T., Kozeschnik E.: Stress relaxation by power-law creep during growth of a misfitting precipitate. Int. J. Solids Struct. 96 (2016) 74-80

Wu X., Wollgramm P., Somsen C., Dlouhý A., Kostka A., Eggeler G.: Double minimum creep of single crystal Ni-base superalloys. Acta Mater. 112 (2016) 242-260

Sklenička V., Kuchařová K., Kvapilová M., Král P., Dvořák J.: Creep Damage and Fracture in Advanced Tungsten Modified 9%Cr Ferritic Steel. Key Eng. Mater. 713 (2016) 183-186

Dobeš F., Dymáček P.: Fracture-based correlation of uniaxial and small punch creep data. Theor. Appl. Fract. Mech. 86 (2016) 34-38

Mašek B., Khalaj O., Nový Z., Kubina T., Jirková H., Svoboda J., Štádler C.: Behaviour of new ODS alloys under single and multiple deformation. Mater. Technol. 50 (2016) 891-898

Betekhtin V., Kolobov Y., Golosová O., Dvořák J., Sklenička V., Kardashev B., Narykova M., Ivanov M.: Elastic modulus, microplastic properties and durability of titanium alloys for biomedical applications. Rev. Adv. Mater. Sci 45 (2016) 42-51

Riedl H., Svoboda J.: A model for strain hardening, recovery, recrystallization and grain growth with applications to forming processes of nickel base alloys. Mater. Sci. Eng. A 665 (2016) 175-183

Yardley V., Povstugar I., Choi P., Raabe D., Parsa A., Kostka A., Somsen C., Dlouhý A., Neukin K., George E., Eggeler G.: On Local Phase Equilibria and the Appearance of Nanoparticles in the Microstructure of Single-Crystal Ni-Base Superalloys. Adv. Eng. Mater. 18 (2016) 1556-1567

Dymáček P.: Recent developments in small punch testing: Applications at elevated temperatures. Theor. Appl. Fract. Mech. 86 (2016) 25-33

Andrés D., Dymáček P.: Study of the upper die clamping conditions in the small punch test. Theor. Appl. Fract. Mech. 86 (2016) 117-123

Král P., Dvořák J., Blum W., Kudryavtsev E., Zherebtsov S., Salischev G., Kvapilová M., Sklenička V.: Creep study of mechanisms involved in low-temperature superplasticity of UFG Ti-6Al-4V processed by SPD. Mater. Character. 116 (2016) 84-90

Svoboda J., Fischer F., Riedl H., Kozeschnik E.: Precipitate growth in multi-component systems with stress relaxation by diffusion and creep. Int. J. Plast. 82 (2016) 112-126

Kočích R., Kunčická L., Král L., Macháčková A.: Sub-structure and mechanical properties of twist channel angular pressed aluminium. Mater. Character. 119 (2016) 75-83

Svoboda J., Fratzl P., Zickler G., Fischer F.: A new treatment of transient grain growth. Acta Mater. 115 (2016) 442-447

Otto F., Dlouhý A., Pradeep K., Kuběnová M., Raabe D., Eggeler G., George E.: Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures. Acta Mater. 112 (2016) 40-52



2015

Sklenička V., Kuchařová K., Kvapilová M., Svoboda M.: Factors influencing creep resistance in discontinuously reinforced magnesium metal matrix composites. Kovové materiály 53 (2015) 221-229

Fischer F., Svoboda J., Antretter T., Kozeschnik E.: Relaxation of a precipitate misfit stress state by creep in the matrix. Int. J. Plast. 64 (2015) 164-176

Betekhtin V., Kolobov Y., Sklenička V., Kadomtsev A., Narykova M., Dvořák J., Golosov E., Kardashev B., Kuz menko I.: Effect of a defect structure on the static and long-term strength of submicrocrystalline VT1-0 titanium fabricated by plastic deformation during screw and lengthwise rolling. Tech. Phys. 60 (2015) 66-71

Dobeš F., Dymáček P., Besterci M.: Estimation of themechanical properties of aluminium and analuminium composite after equal channel angular pressing by means of the small punch test. Mater. Sci. Eng. A 626 (2015) 313-321

Ženíšek J., Kozeschnik E., Svoboda J., Fischer F.: Modelling the role of compositional fluctuations in nucleation kinetics. Acta Mater. 91 (2015) 365-376

Parsa A., Wollgramm P., Buck H., Kostka A., Somsen C., Dlouhý A., Eggeler G.: Ledges and grooves at gama/gama´ interfaces of single crystal superalloys. Acta Mater. 90 (2015) 105-117

Betekhtin V., Dvořák J., Kadomtsev A., Kardashev B., Narykova M., Raab G., Sklenička V., Faizová S.: Durability and static strength of microcrystalline titanium VT1-0 obtained by equal-channel angular pressing. Technical Phys. Lett. 41 (2015) 80-82

Luptáková N., Pešlová F., Kliber J.: The study and microstructure analysis of zinc and zinc oxide. Metalurgija 54 (2015) 43-46

Kloc L.: Critical View on the Creep Modelling Procedures. Acta Phys. Pol. A 128 (2015) 540-542

Fischer F., Svoboda J.: Stress, deformation and diffusion interactions in solids - A simulation study. J. Mech. Phys. Solids 78 (2015) 427-442

Kuchařová K., Sklenička V., Kvapilová M., Svoboda M.: Creep and microstructural processes in a low-alloy 2.25%Cr1.6%W steel (ASTM Grade 23). Mater. Character. 109 (2015) 1-8

Dobeš F., Kratochvíl P., Pešička J., Vodičková V.: Microstructure and Creep Behavior of Fe-27Al-1Nb Alloys with Added Carbon. Metall. Mater. Trans. A 46 (2015) 1580-1587

Kvapilová M., Kuchařová K., Kloc L., Sklenička V.: Creep Behaviour of a Zr-1 wt% Nb Alloy at Elevated Temperatures. Acta Phys. Pol. A 128 (2015) 548-551

Svoboda J., Shan Y., Fischer F.: A new self-consistent model for thermodynamics of binary solutions. Scr. Mater. 108 (2015) 27-30

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Correct Interpretation of Creep Rates: A Case Study of Cu. J. Mater. Sci. Technol. 31 (2015) 1065-1068

Dobeš F., Kratochvíl P., Kejzlar P.: Creep of three-phase alloy Fe-30%Al-5.2%Zr. Kovové materiály 53 (2015) 127-132

Svoboda J., Zickler G., Kozeschnik E., Fischer F.: Kinetics of interstitial segregation in Cottrell atmospheres and grain boundaries. Philos. Mag. Lett. 95 (2015) 458-465

Khalaj O., Mašek B., Jirková H., Ronešová A., Svoboda J.: Investigation on new creep-and oxidation-resistant materials. Mater. Sci. Technol. 49 (2015) 645-651

Votava J., Luptáková N., Kumbál V., Polcar A.: Minimizing abrasive-erosive wear of sugar beet harvesters. Listy cukrovarnické a řepařské 131 (2015) 284-289

Parsa A., Wollgramm P., Buck H., Somsen C., Kostka A., Povstugar I., Choi P., Raabe D., Dlouhý A., Müller J., Spiecker E., Demtroder K., Schreuer J., Neukin K., Eggeler G.: Advanced Scale Bridging Microstructure Analysis of Single Crystal Ni-Base Superalloys. Adv. Eng. Mater. 17 (2015) 216-230

Votava J., Luptáková N., Kumbál V., Polcar A.: Hard-metal Spray Application on Blade Segment of Sugar Beet Harvester Cutting Units. Listy cukrovarnické a řepařské 131 (2015) 341-346

Luptáková N., Pizúrová N., Roupcová P., Dymáček P.: High Temperature Degradation of Powder-Processed Ni-based Superalloy. Materials Engineering - Materialove inzinierstvo 22 (2015) 85-94

Luptáková N., Matejička L., Krečmer N.: Norbert Setting of the optimal parameters of melted glass. Adv. Military Technol. 10 (2015) 73-79

Záležák T., Dlouhý A.: 3D Discrete Dislocation Dynamics: Influence of Segment Mobility on Critical Shear Stress. Acta Phys. Pol. A 128 (2015) 654-656

Luptáková N., Ballóková B., Dymáček P.: Compressive creep testing of composites on the base of MoSi2 - SiC nanoparticles. Manufact. Technol. 15 (2015) 377-380



2014

Svoboda J., Mori G., Prethaler A., Fischer F.: Determination of trapping parameters and the chemical diffusion coefficient from hydrogen permeation experiments. Corros. Sci. 82 (2014) 93-100

Luptáková N., Pešlová F.: Analysis of slag material in the production of zinc oxide. Deterioration, Dependability, Diagnostics 3 (2014) 237-242

Svoboda J., Fischer F.: Generalization of the Lifshitz-Slyozov-Wagner coarsening theory to non-dilute multi-component systems. Acta Mater. 79 (2014) 304-314

Luptáková N., Král P., Dymáček P.: The influence of high temperature on the microstructure and properties of a Ni-based superalloy. Powder Metall. Progr. 14 (2014) 190-198

Luptáková N., Pešlová F., Stodola J.: Effect of residual elements on quality of pure zinc. Deterioration, Dependability, Diagnostics 1 (2014) 147-161

Svoboda J., Stopka J., Fischer F.: Two-dimensional simulation of reactive diffusion in binary systems. Comp. Mater. Sci. 95 (2014) 309-315

Luptáková N., Anisimov E., Pešlová F.: The degradation of lining of rotary furnaces in the production of zinc oxide. Materials Engineering - Materialove inzinierstvo 21 (2014) 116-121

Hrabovský J., Dobeš F., Horský J.: Small Punch Tests at Oxide Scales Surface of Structural Steel and Low Silicon Steel. Oxid. Met. 82 (2014) 297-310

Svoboda J., Fischer F., Klinger L., Rabkin E.: The effect of surface contact conditions on grain boundary interdiffusion in a semi-infinite bicrystal. Philos. Mag. 94 (2014) 3398-3412

Sklenička V., Král P., Dvořák J., Kvapilová M., Svoboda M.: Microstructure evolution and creep behavior in ECAP processed metallic materials. Mater. Sci. Forum 783-786 (2014) 2689-2694

Dobeš F., Dymáček P.: On the correlation of fracture quantities in small punch test. Key Eng. Mater. 592-593 (2014) 275-278

Svoboda J., Shan Y., Kozeschnik E., Fischer F.: Determination of depths of multiple traps for interstitials and their influence on diffusion kinetics. Model. Simul. Mater. Sci. Eng. 22 (2014) 065015

Buršík J., Král P., Svoboda M., Dvořák J., Sklenička V.: Nanoindentation and microstructural study of Cu-Co alloys after severe plastic deformation. Key Eng. Mater. 592-593 (2014) 720-723

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: What is stationary deformation of pure Cu?. J. Mater. Sci. 49 (2014) 2987-2997

Jácome L., Nörtershäuser P., Somsen C., Dlouhý A., Eggeler G.: On the nature of gama´ phase cutting and its effect on high temperature and low stress creep anisotropy of Ni-base single crystal superalloys. Acta Mater. 69 (2014) 246-264

Fischer F., Svoboda J., Petryk H.: Thermodynamic extremal principles for irreversible processes in materials science. Acta Mater. 67 (2014) 1-20

Svoboda J., Fischer F.: Abnormal grain growth: a non-equilibrium thermodynamic model for multi-grain binary systems. Model. Simul. Mater. Sci. Eng. 22 (2014) 015013

Holec D., Friák M., Dlouhý A., Neugebauer J.: Ab initio study of point defects in NiTi-based alloys. Phys. Rev. B 89 (2014) 014110

Buršík J., Buršíková V., Svoboda M., Král P., Dvořák J., Sklenička V.: Microstructure and local mechanical properties of Cu-Co alloys after severe plastic deformation. Key Eng. Mater. 586 (2014) 100-103

Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.: Effect of grain refinement by ECAP on creep of pure Cu. Mater. Sci. Eng. A 590 (2014) 423-432

Fischer F., Svoboda J.: Diffusion of elements and vacancies in multi-component systems. Prog. Mater. Sci. 60 (2014) 338-367

Besterci M., Dobeš F., Kvačkaj T., Sülleiová K., Ballóková B., Velgosová O.: HIGH TEMPERATURE MECHANICAL PROPERTIES OF Al-Al4C3 COMPOSITE. Acta Metall. Slovaca 20 (2014) 326-340

Záležák T., Dlouhý A.: 3D discrete dislocation dynamics applied to a motion of low-angle tilt boundaries. Key Eng. Mater. 592-593 (2014) 87-91

Fischer F., Svoboda J.: Formation of bubbles by hydrogen attack and elastic-plastic deformation of the matrix. Int. J. Plast. 63 (2014) 110-123

Luptáková N., Pešlová F., Stodola J.: Impact of residual of elements on quality of metal zinc. Perner's Contacts 9 (2014) 74-82

Kvapilová M., Dvořák J., Král P., Svoboda M., Sklenička V.: Application of the Monkman-Grant Relationship for Ultrafine-Grained Metallic Materials. Key Eng. Mater. 577-578 (2014) 137-140



2013

Král P., Dvořák J., Zherebtsov S., Salischev G., Kvapilová M., Sklenička V.: Effect of severe plastic deformation on creep behaviour of a Ti-6Al-4V alloy. J. Mater. Sci. 13 (2013) 4789-4795

Besterci M., Dobeš F., Sülleiová K., Velgosová O.: Mechanical Properties of Al-Al4C3 Composite Produced by Mechanical Alloying. Univ. J. Mat. Sci. 1 (2013) 31-38

Fischer F., Svoboda J., Kozeschnik E.: Interstitial Diffusion in Systems with Multiple Sorts of Traps. Model. Simul. Mater. Sci. Eng. 21 (2013) 025008

Hackl K., Fischer F., Klevakina K., Renner J., Svoboda J.: A Variational Approach to Grooving and Wetting. Acta Mater. 61 (2013) 1581-1591

Svoboda J., Shan Y., Kozeschnik E., Fischer F.: Determination of Depths of Interstitial Traps from Thermodynamic Data - A New View on Carbon Trapping and Diffusion. Model. Simul. Mater. Sci. Eng. 21 (2013) 065012

Svoboda J., Fischer F., Schillinger W.: Formation of Multiple Stoichiometric Phases in Binary Systems by Combined Bulk and Grain Boundary Diffusion - Experiments and Model. Acta Mater. 61 (2013) 32-39

Šedivý O., Beneš V., Ponížil P., Král P., Sklenička V.: Quantitative characterization of microstructure of pure copper processed by ECAP. Image Anal. & Stereol. 32 (2013) 65-75

Appel F., Herrmann D., Fischer F., Svoboda J., Kozeschnik E.: Role of Vacancies in Work Hardening and Fatigue of TiAl Alloys. Int. J. Plast. 42 (2013) 83-100

Svoboda J., Fischer F.: A New Computational Treatment of Reactive Diffusion in Binary Systems. Comp. Mater. Sci. 78 (2013) 39-46

Král P., Dluhoš J., Peřina V., Barták T.: 3D analysis of microstructure changes occurring during creep tests of ultra-fine grained materials. Mater. Sci. Forum 753 (2013) 46-49

Fischer F., Mori G., Svoboda J.: Modelling the Influence of Trapping on Hydrogen Permeation in Metals. Corros. Sci. 76 (2013) 382-389

Kuběnová M., Zálešák J., Čermák J., Dlouhý A.: Impact of hydrogen-assisted heat treatments on microstructure and transformation path in a Ni-rich NiTi shape memory alloy. J. Alloys Comp. 577S (2013) 287-290

Sklenička V., Kuchařová K., Kvapilová M., Svoboda M., Král P., Vidrich G.: Creep in an electrodeposited nickel. J. Mater. Sci. 48 (2013) 4780-4788

Dobeš F., Kratochvíl P.: The effect of Zr addition on creep of Fe-30 at.% Al alloys. Intermetallics 43 (2013) 142-146

Dvořák J., Sklenička V., Betekhtin V., Kadomtsev A., Král P., Kvapilová M., Svoboda M.: The effect of high hydrostatic pressure on creep behaviour of pure Al and a Cu-0.2 wt% Zr alloy processed by ECAP. Mater. Sci. Eng. A 584 (2013) 103-113

Onorbe E., Garces G., Dobeš F., Perez P., Adeva P.: High-Temperature Mechanical Behavior of Extruded Mg-Y-Zn Alloy Containing LPSO Phases. Metall. Mater. Trans. A 44A (2013) 2869-2883



2012

Manchuraju S., Kröger A., Somsen C., Dlouhý A., Eggeler G., Sarosi P., Anderson P., Mills M.: Pseudoelastic deformation and size effects during in situ transmission electron microscopy tensile testing of NiTi. Acta Mater. 60 (2012) 2770-2777

Svoboda J., Fischer F., Abart R.: Modeling the Role of Sources and Sinks for Vacancies on the Kinetics of Diffusive Phase Transformation in Binary Systems with Several Stoichiometric Phases. Philos. Mag. Lett. 92 (2012) 67-76

Fischer F., Svoboda J., Hackl K.: Modelling the Kinetics of a Triple Junction. Acta Mater. 60 (2012) 4704-4711

Kratochvíl P., Dobeš F., Pešička J., Málek P., Buršík J., Vodičková V., Hanus P.: Microstructure and high temperature mechanical properties of Zr-alloyed Fe3Al-type aluminides: The effect of carbon. Mater. Sci. Eng. A 548 (2012) 175-182

Dobeš F., Besterci M., Ballóková B., Sülleiová K., Dymáček P.: Analysis of creep fracture in Al-Al4C3 composite after ECAP. Mater. Sci. Eng. A 532 (2012) 567-572

Garces G., Onorbe E., Dobeš F., Perez P., Antoranz J., Adeva P.: Effect of microstructure on creep behaviour of cast Mg97Y2Zn1 (at.%) alloy. Mater. Sci. Eng. A 539 (2012) 48-55

Svoboda J., Fischer F.: Modelling for hydrogen diffusion in metals with traps revisited. Acta Mater. 60 (2012) 1211-1220

Záležák T., Dlouhý A.: 3D Discrete Dislocation Dynamics Applied to Interactions between Dislocation Walls and Particles. Acta Phys. Pol. A 122 (2012) 450-452

Svoboda J., Fischer F., McDowell D.: Derivation of the phase field equations from the thermodynamic extremal principle. Acta Mater. 60 (2012) 396-406



2011

Dudová M., Kuchařová K., Barták T., Bei H., George E., Somsen C., Dlouhý A.: Creep in Directionally Solidified NiAl-Mo Eutectics. Scr. Mater. 65 (2011) 699-702

Svoboda J., Fischer F.: Modelling of the influence of the vacancy source and sink activity and the stress state on diffusion in crystalline solids. Acta Mater. 59 (2011) 1212-1219

Besterci M., Dobeš F., Ballóková B., Sülleiová K., Kvačkaj T.: Observation of Anisotropy of Creep Fracture Using Small Punch Test for Al-Al4C3 System Produced by Equal Channel Angular Pressing. High Temp. Mater. Proc. 30 (2011) 205-210

Kočích R., Kursa M., Szurman I., Dlouhý A.: The influence of imposed strain on the development of microstructure and transformation characteristics of Ni-Ti shape memory alloys. J. Alloys Comp. 509 (2011) 2716-2722

Fischer F., Svoboda J.: Chemically and Mechanically Driven Creep Due to Generation and Annihilation of Vacancies with Non-ideal Sources and Sinks. Int. J. Plast. 27 (2011) 1384-1390

Král P., Dvořák J., Kvapilová M., Svoboda M., Beneš V., Ponížil P., Šedivý O., Sklenička V.: Quantitative Characterization of Microstructure in Copper Processed by ECAP. Mater. Sci. Forum 667-669 (2011) 235-240

Záležák T., Dlouhý A.: 3D discrete dislocation modelling of high temperature plasticity. Key Eng. Mater. 465 (2011) 115-118

Svoboda J., Gamsjäger E., Fischer F., Liu Y., Kozeschnik E.: Diffusion Processes in a Migrating Interface - The Thick Interface Model. Acta Mater. 59 (2011) 4775-4786

Kvapilová M., Sklenička V., Dvořák J., Král P.: An Evaluation of Creep Mechanisms in Ultrafine-Grained Metals. Key Eng. Mater. 465 (2011) 382-385

Kvapilová M., Kuchařová K., Sklenička V., Svoboda M., Hrbáček K.: Creep behaviour and microstructure changes of model cast Ni-Cr-W-C alloys. Procedia Eng. 10 (2011) 839-844

Svobodová M., Tůmová D., Čmakal J., Sopoušek J., Kuchařová K.: Vliv přechodových svarových spojů na životnost tlakových systémů energetických zařízení. All for Power 5 (2011) 100-102

Hackl K., Fischer F., Svoboda J.: A study on the principle of maximum dissipation for coupled and non-coupled non-isothermal processes in materials. Proc. Roy. Soc. Lond. A 467 (2011) 1186-1196

Ulrich C., Hashibon A., Svoboda J., Elsässer C., Helm D., Riedl H.: Diffusion kinetics in aluminium-gold bond contacts from first-principles density functional calculations. Acta Mater. 59 (2011) 7634-7644

Dobeš F., Kratochvíl P., Vodičková V.: The effect of carbon and silicon additions on the creep properties of Fe-40 at.% Al type alloys at elevated temperatures. Intermetallics 19 (2011) 1526-1532

Svoboda J., Fischer F.: Stress Development During Reaction of Metallic Nanospheres with Gas. Acta Mater. 59 (2011) 61-67

Frotscher M., Wu S., Simon T., Somsen C., Dlouhý A., Eggeler G.: Elementary Deformation and Damage Mechanisms During Fatigue of Pseudo-elastic Microstents. Adv. Biomat. 13 (2011) B181-B186

Svoboda J., Fischer F., Leindl M.: Transient Solute Drag in Migrating Grain Boundaries. Acta Mater. 59 (2011) 6556-6562

Fischer F., Svoboda J.: Modelling of Reaction of Metallic Nanospheres with Gas. Solid State Phenom. 172-174 (2011) 1028-1037

Holec D., Friák M., Dlouhý A., Neugebauer J.: Ab initio study of pressure stabilized NiTi allotropes: Pressure-induced transformations and hysteresis loops. Phys. Rev. B 84 (2011) 224119

Svoboda J., Gamsjäger E.: Modelling of Diffusive and Massive Phase Transformations in Binary Systems - Thick Interface Parametric Model. Int. J. Mater. Res. 102 (2011) 666-673

Olbricht J., Yawny A., Pelegrina J., Dlouhý A., Eggeler G.: On the Stress-Induced Formation of R-phase in Ultra-Fine-Grained Ni-rich NiTi Shape Memory Alloys. Metall. Mater. Trans. A 42 (2011) 2556-2574

Fischer F., Svoboda J., Appel F., Kozeschnik E.: Modelling of Excess Vacancy Annihilation at Different Types of Sinks. Acta Mater. 59 (2011) 3463-3472

Dymáček P.: Short term creep small punch testing of P91 and P92 steels, observations and correlations with the numerical results. Key Eng. Mater. 465 (2011) 179-182



2009

Dymáček P., Milička K.: Creep small-punch testing and its numerical simulations. Mater. Sci. Eng. A 510-511 (2009) 444-449