RNDr. Luboš Kloc, CSc.
Position: researcher
Group: Advanced High-temperature Materials Group
Rooms: 310,
Phone numbers: +420 532 290 441, +420 532 290 442
Reseacher ID: G-1030-2014
Creep of a priori Brittle Materials for High Temperature Applications at Very Low Creep Rates
Creep deformation of new grade UNS S31035 austenitic steel including transient effects
Experimental investigation and mathematical simulation of behaviour of the modified cladding tubes of nuclear fuel under storage conditions
High strain sensitivity creep testing techniques for validation of creep constitutive models
Transient Effects in Creep at Conditions Leading to Very Low Strain Rates
Dymáček P., Jarý M., Dobeš F., Kloc L.
Tensile and Creep Testing of Sanicro 25 Using Miniature Specimens
Materials 11, Issue 1 (2018) Article number 142
Kloc L., Sklenička V., Dymáček P., Plešek J.
New creep constitutive equation for finite element modelling including transient effects
Mechanics of Materials 119 (2018) p. 49-55
Kloc L., Dymáček P., Sklenička V.
High temperature creep of Sanicro 25 austenitic steel at low stresses
Materials Science & Engineering A 722 (2018) p. 88-92
Dymáček P., Dobeš F., Kloc L.
Small Punch Testing of Sanicro 25 Steel and its Correlation with Uniaxial Tests
Key Engineering Materials 734 (2017) p. 70-76
Dymáček P., Dobeš F., Kloc L.
Determination of Mechanical Properties of Metallic Materials
from Very Small Volumes by Means of Small Punch Test
Key Engineering Materials 741 (2017) p. 116-121
Kloc L.
Critical View on the Creep Modelling Procedures
Acta Physica Polonica A (2015) p. 540-542
Kvapilova M., Kucharova K., Kloc L., Sklenicka V.
Creep Behaviour of a Zr-1 wt% Nb Alloy at Elevated Temperatures
Acta Physica Polonica A (2015) p. 548-551
Kloc, Luboš
Dislocation model for anelastic transient stage in metals under creep conditions.
Creep and Fracture of Engineering Materials and Structure. Sendai : The Japan Institute of Metals, 2012, B28. ISBN 978-4-88903-407-3.
[International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) /12./. Kyoto (JP), 27.05.2012-31.05.2012]
Sklenička, Václav - Kloc, Luboš
Creep in boiler materials: mechanisms, measurement and modelling.
Power plant life management and performance improvement. Cambridge : Woodhead Publishing Limited, 2011 - (Oakey, J.) S. 1-684. ISBN 978-1-84569-726-6
Luboš Kloc: Internal stress model for pre-primary stage of low-stress creep,
Journal of Physics: Conference Series. 240 (2010), 012086. ISSN 1742-6588.
Luboš Kloc, Michael Spindler, Václav Sklenička:
Creep of Ex-service AISI-316H Steel at Very Low Strain Rates,
Materials for Advanced Power Engineering 2010.
Forschungszentrum Jülich GmbH, 2010 - (J. Lecomte-Beckers, Q. Contrepois, T. Beck, B. Kuhn eds.)
S. 142-149. ISBN 978-3-89336-685-9. ISSN 1866-1793.
Luboš Kloc and Václav Sklenička:
Pre-primary stage of low strain rate creep in metals.
Mater. Sci. Forum 604-605, (2009) 351-356
Luboš Kloc and Petr Mareček:
Measurement of Very Low Creep Strains: A Review
J. Test. Eval. 37, (2009), 53-58
Luboš Kloc:
Creep of ex-service 0.5CrMoV steel at low strain rates.
Mater. Sci. Eng. A 510-511, (2009), 70-73
Kloc, Luboš, Mareček, Petr, Fiala, Jaroslav:
Creep of Zr-doped alumina at very low creep rates.
Mater. Sci. Eng. A 483-484 (2008), 541-543.
Kloc L., Sklenička V.:
Creep of 0.5CrMoV Steel at Very Low Strain Rates
in: J. Lecomte-Beckers et al. (eds.):
Materials for Advanced Power Engineering 2006
Forschongszentrum Julich 2006, vol. II, p. 1011
L. Kloc and J. Fiala:
Viscous creep in metals at intermediate temperatures
Kovove Mater. 43 (2005) 105-112
L. Kloc, J. Fiala:
Harper-Dorn creep in metals at intermediate temperatures revisited: Constant structure test of pure Al.
Mater. Sci. Eng. 410-411 (2005), 38-41
L. Kloc and V. Sklenička:
Confirmation of low stress creep regime in 9% chromium steel by stress change creep experiments
Mater. Sci. Eng. A 387-389 (2004) 633-638
L. Kloc and V. Sklenička:
Importance of the loading history in creep of 9% Cr steel
Proc. of International Conference BALTICA VI Life Management and Maitenance for Power Plants
VTT Symposium 234, VTT, Espoo, Finland 2004, pp. 491-498
L. Kloc and V. Sklenička:
Residual Crepp Life Assessment - is the Current Approach Viable?
in: R. K. Penny (ed.): Asset Management of Aged Plant and Materials: Assessment Methods.
Proceedings of the CAPE 2003 conference, pp. 235-244.
EMAS Publishing Ltd. Sheffield, U.K. 2003.
L. Kloc, J. Fiala and V. Sklenička:
On the Strengthening Factors of Structural Steels under Low Stress Creep Regime
Chem. Listy 96(S) (2002), 212-214
L. Kloc, V. Sklenička and J. Ventruba:
Comparison of low stress creep properties of ferritic and austenitic creep resistant steels
Mater. Sci. Eng. A319-321 (2001), 774-778
L. Kloc and V. Sklenička:
Viscous Creep Regime in Creep Resistant Steels
Proc. of the 7th European Conference on Advanced Materials and Processes EUROMAT 2001
AIM, Milano 2001. Paper #752
L. Kloc and V. Sklenička:
Reliability Problems in Methods of Residual Creep Life Assessment
Proc. of the 10th International Conference Creep Resistant Metallic Materials
Vítkovice R&D, Ostrava 2001
Information leaflet
download pdf (1,3MB)

central european institute of technology


Last update
19. 06. 2018