test
prof. Ing. Ivo Dlouhý, CSc.
Position: head
Groups: Advanced Metallic Materials and Metal Based Composites (CEITEC IPM), Brittle Fracture Group
Rooms: 117
Phone numbers: +420 532 290 342
E-mail: idlouhy@DELETE-THIS.CZ@DELETE-THIS.COMipm.cz.COM
Reseacher ID: C-3534-2013
Projects
Architectured metallic materials designed for cold spray kinetization
Brittle fracture micromechanics and toughness scaling models
CoACH: Advanced glasses, Composites And Ceramics for High growth Industries (European training network - ETN)
Complex System for Attracting, Education and Continuing Involment of Talented Individuals to Research Centers of AS CR and FME BUT
Crack/microcrack behaviour in selected brittle matrix composites
Damage development in thermally shocked fibre reinforced borosilicate glass matrix composite
Development of new TiAl intermetallics with improved mechanical properties through the control of the microstructure of thermomechanical treatment
Euratom
Experimental evaluation and computational modeling of ceramic foams response to mechanical loading
Fracture Resistance of Steels for Containers of Spent Nuclear Fuel
Glass and Ceramic Composites for High Technology Applications – Initial Training Networks
GrInHy: Green Industrial Hydrogen via reversible high-temperature electrolysis
Impact response and dynamic failure of brittle materials
Limit states of failure in advanced structural materials assessed by means of unconventional test methods
Mechanical and fracture properties of multilayered ceramic/ceramic and ceramic/metal materials with graded layers
Mechanical Engineering Cooperative Network
Micro-structurally induced shielding effects in toughening of ceramic matrix composites
Micromechanical aspects of brittle fracture initiation with respect to impurity effects
Microstructural design of high toughness materials
Multiscale Design of Advanced Materials
Multiscale Design of Advanced Materials I
NETME centre - New Technologies for Engineering - Division of Advanced Metallic Materials (AMM)
Physical metallurgy aspect of fatigue damage of engineering parts made from steels multiaxially stressed by cycling loading
Physical properties of advanced materials in relation to their microstructure and processing
Properties degradation in thermally loaded glass matrix composites
Properties of engineering materials under development applicable in the near future in traffic, medicine and power generating industry
Statistical aspects of constraint at brittle fracture initiation
Structure, properties and metallurgy of near-gamma TiAl alloys
Study of mechanical and fracture properties of composites reinforced nanoceramic boron nitride nanotubes
The micromechanics of self-affine fractal cracks in brittle materials
The role of local constraint and strain rate in failure micromechanisms of duplex steels
The scaling role of damage inhomogeneity in brittle failure
Publications:
2017
Igor Moravčík, Jan Čížek, Josef Zapletal, Zuzana Kováčová, Jozef Veselý, Peter Minarik, Michael Kitzmantel, Erich Neubauer, Ivo Dlouhý: Microstructure and mechanical properties of Ni1,5Co1,5CrFeTi0,5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering; Materials and Design 119 (2017) 141–150.
D.N. Boccaccini, O. Sevecek, H.L. Frandsen, I. Dlouhy, P.V. Hendriksen: Determination of the bonding strength in solid oxide fuel cells’interfaces by Schwickerath crack initiation test; Journal of the European Ceramic Society, 37 (11), 2017, p. 3565-3578.
Peter Tatarko, Zdeněk Chlup, Amit Mahajan, Valentina Casalegno, Theo G. Saunders, Ivo Dlouhý, Michael J. Reece: High temperature properties of the monolithic CVD β-SiC materials joined with a pre-sintered MAX phase Ti3SiC2 interlayer via solid-state diffusion bonding, Journal of the European Ceramic Society 37 (2017) 1205–1216.
Kotrechko, S., Gryshchenko, V., Kozák, V., Dlouhý, I.: Method of Threshold Stress Determination for a Local Approach to Cleavage Fracture , Materials Structure and Micromechanics of Fracture VIII (MSMF 8, Brno, 2016) Solid State Phenomena (ISSN 1012-0394), 2017 Trans Tech Publications 281-285.
Kotrechko, S., Gryshchenko, V., Kozák, V., Dlouhý, I.: Method of Threshold Stress Determination for a Local Approach to Cleavage Fracture , Materials Structure and Micromechanics of Fracture VIII (MSMF 8, Brno, 2016) Solid State Phenomena (ISSN 1012-0394), 2017 Trans Tech Publications 281-285.
Luca Bertolla, Ivo Dlouhý, Peter Tatarko, Alberto Viani, Amit Mahajan, Zdeněk Chlup, Michael J. Reece, Aldo R. Boccaccini: Pressureless spark plasma–sintered Bioglass® 45S5 with enhanced mechanical properties and stress–induced new phase formation, Journal of the European Ceramic Society 37 (2017) 2727–2736.
2016
Boccaccini, D.N., Sevecek, O., Frandsen, H.L., Dlouhy, I., Molin, S., Cannio, M., Hjelm, J., Hendriksen, P.V.: Investigation of the bonding strength and bonding mechanisms of SOFCs interconnector-electrode interfaces; Materials Letters 162 (2016) 1, 250-253.
Sobotová, J., Jurči, P., Dlouhý, I.: The effect of subzero treatment on microstructure, fracture toughness, and wear resistance of Vanadis 6 tool steel; Materials Science & Engineering A 652 (2016) 192–204.
Falat, L., Kepič, J., Čiriprova, L., Ševc, P., Dlouhý, I.: The effects of postweld heat treatment and isothermal aging on T92 steel heat-affected zone mechanical properties of T92/TP316H dissimilar weldments; Journal of Materials Research 31 (10) 2016, p. 1532-1543.
Dlouhý, I., Chlup, Z., Hadraba, H., Řehořek, L.: Response of alumina foam to tensile mechanical loading including stress concentrator effect; Procedia Materials Science 12, 2016, p. 106 – 111. (Conf. 6th New Methods of Damage and Failure Analysis of Structural Parts [MDFA], 2014).
I. Dlouhý, L. Stratil, H. Fukutomi, M. Hasegawa: Crack resistance characterisation TiAl intermetallics showing enhanced toughness; 7th Int. Conference New Methods of Damage and Failure Analysis of Structural Parts [MDFA], 2016, Japan, Book of Abstract, 5-6.
I. Dlouhý, L. Stratil, F. Šiška: Subsized specimens for fracture resistence characterisation including transferability issues; 7th Int. Conference New Methods of Damage and Failure Analysis of Structural Parts [MDFA], 2016, Japan, Book of Abstract, 7-8.
I. Dlouhý: Response of the foam ceramics to mechanical loading, Yokohama National University, Institute of Advanced Sciences, invited lecture (unpublished) (2016)
P. Tatarko, Z. Chlup, V. Casalegno, M. Salvo, I. Dlouhý, M. Ferraris, M.J. Reece: Room and high temperature failure of advanced SiC-based joined components with a MAX phase interlayer, Fractography of Ceramics, Smolenice, 2016.
Kozák, V., Chlup, Z., Padělek, P., Dlouhý, I.: Prediction of the Traction Separation Law of Ceramics Using Iterative Finite Element Modelling, Materials Structure and Micromechanics of Fracture VIII (MSMF 8) Brno (2016) 186-193.
Kotrechko, S., Gryshchenko, V., Kozák, V., Dlouhý, I.: Method of Threshold Stress Determination for a Local Approach to Cleavage Fracture , Materials Structure and Micromechanics of Fracture VIII (MSMF 8) Brno (2016) 281-285.
Martina Halasová, Martin Černý, Adam Strachota, Zdeněk Chlup, Ivo Dlouhý: Fracture response of SiOC based composites on dynamic loading, Journal of Composite Materials 50[11] (2016) 1547–1554.
L. Bertolla, I. Dlouhý, P. Tatarko, A. Viani, A. Mahajan, Z. Chlup, M. J. Reece, A. R. Boccaccini: Spark plasma-sintered Bioglass® 45S5 with enhanced mechanical properties and stress-induced new phase formation, Fractography of Advanced Ceramics, Smolenice, 2016.
Harshit Porwal, Richa Saggar, Peter Tatarko, Salvatore Grasso, Theo Saunders, Ivo Dlouhý, Mike J. Reece: Effect of lateral size of graphene nano-sheets on the mechanical properties and machinability of alumina nano-composites; Ceramics International 42 (6) (2016) 7533-7542.
2015
Cizek, J., Matejkova, M., Dlouhy, I., Siska, F., Kay, C.M., Karthikeyan, J., Kuroda, S., Kovarik, O.,.Siegl, J., Loke, K., Khor, K.A.: Influence of Cold-Sprayed, Warm-Sprayed, and Plasma-Sprayed Layers Deposition on Fatigue Properties of Steel Specimens; Journal of Thermal Spray Technology 24 (2015) 5, 758-768.
Zdeněk Chlup, Hynek Hadraba, Daniel Drdlík and Ivo Dlouhý: Micro fibres containing laminates prepared by EPD: microstructure and fracture behaviour, Electrophoretic Deposition: Fundamentals and Applications V, Key Engineering Materials Vol 654 (2015) pp 53-57.
Kašiarová, M., Tatarko, P., Chlup, Z., Dlouhý, I.: Ceramic matrix reinforced by BN nanofillers. In Preparation of ceramic materials : Proceedings of the 11th international conference. Herľany, 2015, p. 33-36.
Halasova, M., Chlup, Z., Černý, M., Dlouhý, I.: Stress relaxation in partially pyrolysed SiOC materials; Multi-level Design of Advanced Materials, doctoral conference, Velké Bílovice, CR (2015), s. 100-105.
Luca Bertolla; Zdenek Chlup; Ludek Stratil; Aldo R. Boccaccini; Ivo Dlouhy: Effect of hybrid polymer coating of Bioglass foams on mechanical response during tensile loading, Advances in Applied Ceramics 114 S1 (2015) S63-S69.
Saggar, R., Porwal, H., Tatarko, P., Dlouhý, I., Reece, M.J.: Borono nitride nanosheets reinforced glass matrix composites; Advances in Applied Ceramics 114 (2015) S1, S26-S33.
Siska, F., Stratil, L., Dlouhy, I., Barnett, M.R.: Modelling of the stiffness evolution of truss core structures damaged by plastic buckling; Finite Elements in Analysis and Design 100 (2015) 1-11.
Siska, F., Stratil, L., Dlouhy, I., Barnett, M.R.: Stiffness and strength degradation of damaged truss core composites; Comoposite Structures 125 (2015) 287-294.
2014
Makoto Hasegawa, Takuya Nomura, Hideki Haga, Ivo Dlouhý, Hiroshi Fukutomi: Microstructural control of Ti-46Al-7Nb-0.7Cr-0.2Ni-0.1Si alloy by heat treatment; Int. J. Mater. Res. 105 (2014) E; 1 – 9.
Ivo Dlouhý, Zdeněk Chlup,Hynek Hadraba, Lukáš Řehořek: Response of alumina foam to tensile mechanical loading including stress concentrator effect; New methods of damane and failure analysis of structural parts, 2014, Ostrava, p. 121-122.
Dlouhý, I., Bertolla, L., Chlup, Z., Boccaccini, A.R.: Bioglass®-based Scaffolds Reinforced by comoposite coating: Preparation and response to mechanical loading; An ECI Conference Series Syntactic and Composite Foams IV; 2014, Santa Fe, NM, USA.
Grishchenko, W., Kotrechko, S., Mamedov, S., Zatsarna, O., Dlouhy, I.: Interrelation between local and global characteristics of cleavage fracture Key Engineering Materials Vols. 592-593 (2014) pp 221-224. (gr. bi-national Czech - Ukrainian collaboration) (Conference: 7th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 7) Brno, 2013)
Marcian, P.; Valasek, J.; Hrstka, M., Majer, Z., Ševeček O., Profant, T., Dlouhý, I., Florian, Z.: Computational Modeling of Porous Cerami(gr. FSI) (Conference: 7th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 7) Brno, 2013)
Zdeněk Chlup, Martin Černý, Adam Strachota, Martina Halasova and Ivo Dlouhy: Fibre-matrix interface development during high temperature exposition of long fibre reinforced SiOC matrix; Key Engineering Materials Vols. 592-593 (2014) pp 401-404.
Zdenek Chlup, Hynek Hadraba, Daniel Drdlik, Karel Maca, Ivo Dlouhy, Raul Bermejo: On the determination of the stress-free temperature for alumina–zirconia multilayer structures; Ceramics International 40 (2014) 5787-5793.
Peter Tatarko, Salvatore Grasso, Harshit Porwal, Zdeněk Chlup, Richa Saggar,Ivo Dlouhý, Michael J. Reece: Boron nitride nanotubes as a reinforcement for brittle matrices; Journal of the European Ceramic Society 34 (2014) 3339–3349
Zdeněk Chlup, Martin Černý, Adam Strachota, Zbyněk Sucharda, Martina Halasová, Ivo Dlouhý: Influence of pyrolysis temperature on fracture response in SiOC based composites reinforced by basalt woven fabric, Journal of the European Ceramic Society 34 (2014), pp. 3389-3398.
Krysztof Rodzen, Martin Černý, Adam Strachota, Zdeněk Chlup, Martina Havelcová, Katarzyna Depa, Zbyněk Sucharda, Ivo Dlouhý: Synthesis, mechanical properties and potential applications of nano-segmented silicon oxycarbide via partial pyrolysis of siloxane resins, Szeged International Workshop on Advances in Nanoscience 6. - SIWAN6. 15.10.2014-18.10.2014, Szeged, Hungary. 2014, p.151. (poster)
Adam Strachota, Martin Černý, Zdeněk Chlup, Miroslav Šlouf, Petr Glogar, Zbyněk Sucharda, Martina Havelcová, Ivo Dlouhý, Vladislav Kozák: Synthesis of curable siloxane and silazane resins and their conversion into nanostructured silicon oxycarbide glasses and foams. In Book of Abstracts. Dresden: Leibniz-Institut für Polymerforschung Dresden e. V, 2014. p106. ISBN 978-3-9816007-1-1.
Martina Halasová, Zdeněk Chlup, Martin Černý, Adam Strachota, Zbyněk Sucharda, Ivo Dlouhý: Effect of Loading Rate on the Behaviour of Partially Pyrolyzed Basalt Fibre Reinforced Composite, CIMTEC 2014 - 13th International Conference on Modern Materials and Technologies, Montecatini Terme, Italy, June 8-13, 2014.
Peter Tatarko, Salvatore Grasso, Zdeněk Chlup, Harshit Porwal, Monika Kašiarová, Ivo Dlouhý, Michael J. Reece: Toughening effect of multi-walled boron nitride nanotubes and their influence on the sintering behaviour of 3Y-TZP zirconia ceramics, Journal of the European Ceramic Society 34 (2014) 1829-1843.
Harshit Porwal, Peter Tatarko, Richa Saggar, Salvatore Grasso, Mahesh Kumar Mani, Ivo Dlouhý, Jan Dusza, Mike J. Reece: Tribological properties of silica-graphene nano platelet composite; Ceramics International 40 (8) (2014) 12067-12074
Luca Bertolla, Ivo Dlouhý, A. Philippart, Aldo R. Boccaccini: Mechanical reinforcement of Bioglass (R)-based scaffolds by novel polyvinyl-alcohol/microfibrillated cellulose composite coating; Materials Letters 118, (2014) 204-207.
Luca Bertolla, Ivo Dlouhý, Aldo R. Boccaccini: Preparation and characterization of Bioglass®-based scaffolds reinforced bypoly-vinyl alcohol/microfibrillated cellulose composite coating; Journal of the European Ceramic Society 34 (2014) 3379–3387.
Bertolla, L., Dlouhý, I., Boccaccini, A.R.: Bioglass® Scaffolds Reinforced by a Composite Polyvinyl Alcohol/Microfibrillated Cellulose Coating; Conf. Materials Science & Technology 2014.
Saggar, R., Porwal, H., Tatarko, P., Dlouhý, I., Reece, M.J.: Boron Nitride Nanosheets Reinforced Amorphous Glass Composites; Conf. Materials Science & Technology 2014.
2013
Lukáš Řehořek, Zdeněk Chlup, D. Meng, D.M. Yunos, Aldo R. Boccaccini, Ivo Dlouhý: Response of 45S5 Bioglass (R) foams to tensile loading; Ceramics International 39 (7)(2013) p. 8015-8020, DOI: 10.1016/j.ceramint.2013.03.070
Hynek Hadraba, Daniel Drdlík, Zdeněk Chlup, Karel Maca, Ivo Dlouhý, Jaroslav Cihlář: Layered ceramic composites via control of electrophoretic deposition kinetics; Journal of the European Ceramic Society 33 (2013) 2305–2312.
Luděk Stratil, Hynek Hadraba, Ivo Dlouhý: Ductile damage identification and tensile notch effect for Eurofer97 steel. Acta metalurgica slovaca, 2013, roč. 2013(3), č. 1, s. 185-190. ISSN: 1338- 1660.
Martina Halasová, Zdeněk Chlup, Adam Strachota, Martin Černý, Ivo Dlouhý: Mechanical response of novel SiOC glasses to high temperature exposition (Vol 32, Pg 4489, 2012) , Journal of the European Ceramic Society (33) 5, pp. 905-905.
Harshit Porval, Peter Tatarko, Salvatore Grasso, Chunfeng Hu, Aldo R. Bocccaccini, Ivo Dlouhý, Mike J. Reece: Toughened and machinable glass matrix composites reinforced with graphene and graphene-oxide nano platelets. Science and Technology of Advanced Materials; Sci. Technol. Adv. Mater. 14 (5) (2013), DOI:10.1088/1468-6996/14/5/055007
Harshit Porwal, Peter Tatarko, Salvatore Grasso, Jibran Khaliq, Ivo Dlouhý, Mike J. Reece: Graphene reinforced alumina nano-composites; Carbon (64) (2013) p. 359-369, DOI: 10.1016/j.carbon.2013.07.086
Luca Bertolla, Ivo Dlouhý, Lukáš Řehořek, Zdeněk Chlup: Tensile Properties of Open Cell Ceramic Foams; Acta Metallurgica Slovaca - Conference, Vol. 3, 2013, p. 106-113.
2012
D.N. Boccaccini, M. Maioli, M. Cannio, I. Dlouhy, M. Romagnoli, C. Leonelli, A.R. Boccaccini: A lifetime prediction method based on Cumulative Flaw Length Theory; Original Research Article, Journal of the European Ceramic Society, Vol. 32, Issue 6 (2012), pp. 1175-1186.
Petr Marcián, Zdeněk Majer, Zdeněk Florian, Ivo Dlouhý: Stress Strain Analysis of High Porous Ceramics; Advanced Materials Research Vols. 482-484 (2012) pp 1330-1333.
Hasegawa, M., Nomura, T., Haga, H., Dlouhý, I., Fukutomi, H.: Effect of Microstructure Change on the Crack Formation of Heat Treated Ti-Al Intermetallic Compound (Vliv mikrostrukturních změn na tvorbu trhlin v tepelně zpracovaných TiAl intermetalických slitinách); New Methods of Damage and Failure Analysis of Structural Parts, Ostrava, 2012, pp. 185-192.
Dlouhý, I., Haga, H., Chlup, Z., Hadraba, H., Hasegawa, M., Fukutomi, H.: The Role of Microstructure in Fracture Resistence Control of TiAl Based Intermetalics (Úloha mikrostruktury při řízení odolnosti vůči lomu intermetalika na bázi TiAl) ; New Methods of Damage and Failure Analysis of Structural Parts, Ostrava, 2012, pp. 193-201.
Čížek, J., Man, O., Dlouhý, I.: Development of Cold Sprayed Anti-oxidation Ti-doped Al Barriers on γ-TiAl Substrates (Vývoj antioxidačních Ti-Al
bariér nanesených na γ-TiAl substrátech technologií studeného kinetického naprašování); New Methods of Damage and Failure Analysis of Structural Parts, Ostrava, 2012, pp. 443-450.
Hynek Hadraba, Zdenek Chlup, Daniel Drdlik, Karel Maca, Ivo Dlouhy: Control of electrophoretic deposition kinetics for preparation of laminated alumina/zirconia ceramic composites, Key Engineering Materials Vol. 507 (2012) pp 209-213
Hynek Hadraba, Daniel Drdlik, Zdenek Chlup, Karel Maca, Ivo Dlouhy, Jaroslav Cihlar: Laminated alumina/zirconia ceramic composites prepared by electrophoretic deposition, Journal of the European Ceramic Society 32 (2012) 2053–2056.
Hadraba, H., Dlouhý, I., Hojna, A., Di Gabriele, R.: Embrittlement of Ferritic 14% Cr ODS Steel in Air and in /b/Pb-Bi Coolants at Elevated Temperatures (Vysokoteplotní zkřehnutí reritické 14%Cr ODS oceli ve vzdušné atmosféře a v prostředí tavenin /b/Pb-Bi; New Methods of Damage and Failure Analysis of Structural Parts, Ostrava, 2012, pp. 437-442.
Hadraba, H., Stratil, L., Dlouhý, I., Hojná, A., Di Gabriele, F.: High-temperature embrittlement of ferritic ODS steels in Pb/Pb-Bi coolants. Fraktografia 2012. Košice, s. 12-12.
Zdenek Chlup, Hynek Hadraba, Daniel Drdlik, Karel Maca, Ivo Dlouhy: Development of internal stresses in alumina-zirconia laminates, Key Engineering Materials Vol. 507 (2012) pp 221-226
Zdeněk Chlup, Hynek Hadraba, Lenka Slabáková, Dan Drdlík, Ivo Dlouhý: Fracture behaviour of alumina and zirconia thin layered laminate, Journal of the European Ceramic Society 32 (2012) 2057–2061.
Asher S. Ahmedw, Zdenek Chlup, Ivo Dlouhy, Rees D. Rawlings, Aldo R. Boccaccini: Mechanical Properties of Low-Density SiC-Coated Carbon-Bonded Carbon Fiber Composites; Int. J. Appl. Ceram. Technol., Vol. 9, Nr.2 (2012), pp. 401–412.
Adam Strachota , Martin Černý, Zdeněk Chlup, Miroslav Šlouf, Jiřina Hromádková, Josef Pleštil, Hana Šandová, Petr Glogar, Zbyněk Sucharda, Martina Havelcová, Jana Schweigstillová, Ivo Dlouhý, Vladislav Kozák: Optimization of sol–gel/pyrolysis routes to silicon oxycarbide glasses, Journal of Non-Crystalline Solids. Roč. 358, č. 20 (2012), s. 2771-2782.
Stratil, L., Hadraba, H., Dlouhý, I.: Studie tvárného mechanismu porušování oceli Eurofer97; Víceúrovňový design pokrokových materiálů, sborník 6. konference doktorandů 2012, Brno, 2012, p. 59-64.
Stratil, L., Hadraba, H., Dlouhý, I.: Vliv multiaxiality napětí na nukleaci a růst dutin při tvárném porušení (The effect of stress multiaxiality on void nucleation and growth at ductile fracture); Fraktografia 2012. Košice, s. 38-38.
Stratil L.; Hadraba H; Kozák V.; Dlouhý I.: Modelling of ductile fracture for sub-sized three point bend geometry. Engineering Mechanics 2012, Svratka, CR, 2012, p. 1253 – 1258.
Martina Halasova, Zdenek Chlup, Adam Strachota, Martin Cerny, Ivo Dlouhy: Mechanical response of novel SiOC glasses to high temperature exposition, Journal of the European Ceramic Society 32
(2012) 4489–4495.
Martina Halasová, Luboš Bača, Pavol Šajgalík, Zdeněk Chlup, Ivo Dlouhý: Mikrostruktura a tvrdost TiB2; Víceúrovňový design pokrokových materiálů, sborník 6. konference doktorandů 2012, Brno, 2012, p. 125-132.
2011
Dlouhý, I., Tadafder, M., Hadraba, H.: Micromechanical Aspects of Transgranular and Intergranular Failure Competition; Key Engineering Materials 465 (2011) pp 399-402.
Kotrechko, S., Mamedov, S., Dlouhý, I., Kozák, V.: Use of Local Approach for Prediction of the Irradiation Effect on Fracture Toughness of Pressure Vessel Steel; Key Engineering Materials 465 (2011) pp 568-573
Dlouhý, I., Chlup, Z., Hadraba, H.:Vliv povrchového tvrzení na lomové chování ocelí (Influence of surface hardening on fracture behaviour of steels): konference s mezinárodní účastí Využití laserů v průmyslu 2011, Plzeň (2011), p. 69-78.
Jurči, P., Dlouhý, I.: Fracture behaviour of P/M Cr-V ledeburitic steel with different surface roughness; Materials Engineering - Materiálové inžinierstvo 18 (2011) 36-43.
Dlouhý, I., Hadraba, H., Chlup, Z., Válka, L., Žák, L.: Prediction of fracture toughness transition from tensile test data applying neural network; Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference PVP2011-57932, July 17-21, 2011, Baltimore, Maryland, USA, p. 1-5.
Brumek, J., Strnadel, B., Dlouhý, I.: New approach to stress-strain curve prediction using ball indentation test; Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference PVP2011-57793, July 17-21, 2011, Baltimore, Maryland, USA, p. 1-6.
Dlouhý, I., Řehořek, L., Chlup, Z.: Behaviour of Open Cell Ceramic Foams in Tension; MS&T’11 – Materials Science and Technology 2011 Conference and Exhibition, 2011, p. 165.
Jurči, P., Dlouhý, I.: Coating of Cr–V ledeburitic steel with CrN containing a small addition of Ag; Applied Surface Science 257 (2011), pp. 10581– 10589.
Dlouhý, I., Hadraba, H., Chlup, Z., Šmída, T.: Prediction of fracture toughness temperature dependence applying neural network; Structural Integrity and Life, Vol. 11, No. 1 (2011), pp. 9-14.
Hadraba, H., Kazimierzak, B., Stratil, L., Dlouhý, I.: Microstructure and impact properties of ferritic ODS ODM401 (14%Cr-ODS of MA957 type) ; Journal of Nuclear Materials, Vol. 417, Issues 1-3, 1 October 2011, pp. 241-244.
Hynek Hadraba, Daniel Drdlik, Zdenek Chlup, Karel Maca, Ivo Dlouhy, Jaroslav Cihlar: Laminated ceramic composites with tailored properties via electrophoretic deposition kinetics control, EngCer 2011, Smolenice, Slovakia (2011).
Hynek Hadraba, Zdenek Chlup, Daniel Drdlik, Karel Maca, Ivo Dlouhy: Control of electrophoretic deposition kinetics for preparation of laminated alumina/zirconia ceramic composites, 4th International Conference on Electrophoretic Deposition: Fundamentals and Applications, October 2-7, 2011, CasaMagna Marriott Hotel, Puerto Vallarta, Mexico.
Chlup, Z., Černý, M., Strachota, A., Dlouhý, I.: Role of pyrolysis conditions on fracture behaviour of fibre reinforced Composites, Key Engineering Materials Vol. 465 (2011) pp 455-458.
Cho, J., Inam, F., Reece, M. J., Chlup, Z., Dlouhý, I., Shaffer, M.S.P., Boccaccini, A.R.: Carbon nanotubes: do they toughen brittle matrices?; J Mater Sci 46 (14), 2011, p. 4770–4779.
A. Strachota M. Černý P. Glogar Z. Sucharda M. Havelcová Z. Chlup I. Dlouhý V. Kozák: Preparation and optimalization of silicon oxycarbide composites toughened by inorganic fibers by pyrolysis of precursor composites with siloxane matrix. Acta Physica Polonica A Vol. 120 (2) (2011) 326-330.
Zdeněk Chlup, Hynek Hadraba, Lenka Slabáková, Dan Drdlík, Ivo Dlouhý: Effect of Internal Stresses on Fracture Behaviour of Alumina and Zirconia Based Layered Composites. EngCer 2011, Smolenice, Slovakia (2011).
Zdenek Chlup, Hynek Hadraba, Daniel Drdlik, Karel Maca, Ivo Dlouhy: Controlled development of internal stresses of alumina-zirconia laminated structures, 4th International Conference on Electrophoretic Deposition: Fundamentals and Applications, October 2-7, 2011, CasaMagna Marriott Hotel, Puerto Vallarta, Mexico.
Adam Strachota, Miloš Steinhart, Antonín Sikora, Martin Černý, Petr Glogar, Zbyněk Sucharda, Zdeněk Chlup, Ivo Dlouhý, Vladislav Kozák: Preparation and optimalization of nano-segmented silicon oxycarbide and related SiONC and SiNC ceramic matrices via pyrolysis of siloxane polymers. Nanocon 2011, Brno, Czech Rep., (2011) p. 24.
Stratil, L.; Čermák, M.; Hadraba, H.; Dlouhý, I.: Transferability of fracture mechanical data from sub-sized three-point- bend geometry. Limerick, Irsko. 2011.
Stratil, L.; Hadraba, H.; Dlouhý, I.: Určování J- deltaa křivek pomocí miniaturních těles pro tříbodový ohyb; Víceúrovňový design pokrokových materiálů 2011, Brno, s. 145-154.
2010
Rehorek, L., Dlouhy, I., Chlup, Z.: Tensile Behaviour of Open Cell Ceramic Flaks, Ceramics – Silikáty 53 (4) (2009) 237-241.
Řehořek, L., Dlouhý, I., Chlup, Z.: Vliv povlaku na lomové hcování keramických pěn při tahovém zatěžování; Křehký lom 2010, sborník semináře Design a porušování materiálů, Brno, 2010, p. 157-170
Dlouhy I., Šandera P.: SPECIAL ISSUE 17th European Conferrence on Fracture held in Brno in September 2-5, 2008; Engeneering Failure Analysis, 17 (3), SI 2010, 595-595
Dlouhý, I., Hadraba, H.., Chlup, Z., Šmida, T.: Prediction of fracture toughness temperature dependence applying neural Network; NT2F10 – New Trends in Fatigue and Fracture Congress, Metz, France, 2010, 9 stran, CD (gr. 3021)
Iino, Y., Švejcar, J., Dlouhy, I., Forejt, M.: Effect of strain rate 10-7 to 10-4 s-1 on room temperature tensile properties and notched plastic zone of type 304 stainless steel, ECF18 – 18th European Conference on Fracture; Fracture of Materiále and Structures from Micro to Macro Scale, 2010, Drážďany, CD (gr. 3011)
Dlouhý, I., Hadraba, H., Chlup, Z., Kozák, V., Šmída, T.: Prediction of fracture toughness transition from tensile test parameters applying artificial neural network; New Methods of Damane and Failure Analysis of Structural Parts, 6-10, september, 2010, Ostrava, p. 207-215
Brumek, J., Strnadel, B., Dlouhý, I.: Nonlinear modeling of stable crack growth; New Methods of Damane and Failure Analysis of Structural Parts, 6-10, september, 2010, Ostrava, p. 403-411
ed. I. Dlouhý: Křehký lom 2010, sborník semináře Design a porušování materiálů, Brno, 2010, 246 stran, ISBN 978-80-87434-01-7
Macurová, K., Tichý, R., Strnadel, B., Dlouhý, I.: Posuzování bezpečnosti tlakových lahví; Křehký lom 2010, sborník semináře Design a porušování materiálů, Brno, 2010, p. 53-60
Dlouhý, I., Hadraba, H., Kozák, V., Chlup, Z., Holzmann, M.: Současné přístupy k hodnocení křehkolomových charakteristik ocelí; Křehký lom 2010, sborník semináře Design a porušování materiálů, Brno, 2010, p. 7-34
ed. I. Dlouhý, J. Švejcar, M. Šob: Víceúrovňový design pokrokových materiálů, sborník 6. konference doktorandů 2010, Brno, 2010, 131 stran, ISBN 978-80-87434-02-4
Šmida T., Babjak J., Dlouhý I.: Prediction of fracture toughness temperature diagram from tensile test parameters, Kovové materiály – Metalic Mater., vol. 48 (2010), no. 6, pp. 345 – 352, DOI: 10.4149/km_2010_6_345
Desimone, D., Dlouhý, I., Lee, W.E., Koch, D., Horvath, J., Boccaccini, A.R.: Optically-transparent oxide fibre-reinforced glass matrix composites;
Journal of Non-Crystalline Solis 356 (44-49) Sp. Iss., 2010, p. 2591-2597 (Conf. 12th International Conference on the Physics of Non-Crystalline Solids (PNCS12), SEP 06-09, 2009 Foz do Iguacu, BRAZIL)
Tarafder, M., Dlouhý, I., Hore, S., Das, S.K.: Fractural based microstructural damane evaluation in Ni-based superalloy gas turbine blades; New Methods of Damage and Failure Analysis of Structural Parts, 6-10, september, 2010, Ostrava, p. 253-261.
Brumek, J., Strnadel, B., Dlouhý, I.: Use of genetic algorithm for identification of nonlinear constitutive materiál models; Chem. Listy 104 (2010) pp. S299-S302
ISSN 1213-7103, 0009-2770 (printed), 1803-2389 (CD-ROM)
Brumek, J., Strnadel, B., Dlouhý, I.: Local approach in mechanical properte prediction; 19th International Conference on Metallurgy and Materials Location: Roznov Pod Radhostem, 2010, pp. 490-494
Brumek, J., Strnadel, B., Dlouhý, I.: The model of Fatigue crack growth in High Pressure cylinder wall; Pressure Vessels and Piping Conference 2010, Vol. 5, Bellevue, WA, 2010, pp. 635-639
Hadraba, H., Fournier, B., Stratil, L., Dlouhý, I.: Microstructure and impact response of high-chromium ODS steel; New Methods of Damane and Failure Analysis of Structural Parts, 6-10, september, 2010, Ostrava, p. 145-151 (gr. 3821)
Hadraba, H., Stratil, L., Kazimierzak, B., Fournier, B., Dlouhý, I.: Lomové chování vysocechromových 9% a 14% Cr-Mo a Cr-W ODS ocelí; Křehký lom 2010, sborník semináře Design a porušování materiálů, Brno, 2010, p. 43-52
Chlup, Z., Flašar, P., Dlouhy, I.: Response of inherently brittle materials on higher loading rates. Engineering Fracture Mechanics 77 ( 2), 2010, p. 359-366
Chlup, Z., Slabáková, L., Drdlík, D., Hadraba, H., Dlouhý, I.: Lomové chování keramických laminátů se silně vázanými vrstvami; Křehký lom 2010, sborník semináře Design a porušování materiálů, Brno, 2010, p. 133-146, (gr. 1931)
Strachota, A., Černý, M., Glogar, P., Sucharda, Z., Chlup, Z., Dlouhý, I., Kozák, V.: Preparation and optimalization of silicon oxycarbide composites toughened by inorganic fibers by pyrolysis of precursor composites with siloxane matrix; Programme and The Book of Abstracts. Belgrade : s. 46.; [Annual Conference /12./ YUCOMAT 2010. 06.09.2010-10.09.2010, Herceg Novi]
Stratil, L., Hadraba, H., Dlouhý, I.: Určování lomové houževnatosti z podrozměrných vzorků typu KLST; Křehký lom 2010, sborník semináře Design a porušování materiálů, Brno, 2010, p. 35-42
Stratil, L., Hadraba, H., Dlouhý, Il: Vliv constraintu na hodnoty lomové houževnatosti v miniaturních vzorcích pro tříbodový ohyb; Víceúrovňový design pokrokových materiálů, sborník 6. konference doktorandů 2010, Brno, 2010, p. 99-106.
Stratil, L., Hadraba, H., Dlouhý, I.: Mechanismy vzniku zkřehnutí a vliv žíhání na křehkolomové vlastnosti oceli EUROFER´97; 23. dny tepelného zpracování s mezinárodní účastí, 23.-25.11.2010, Jihlava
Stratil L., Hadraba H., Dlouhý I.: High temperature service embrittlement of EUROFER´97 steel, Acta Metallurgica Slovaka, 1 (2), 2010, p. 142-150
2009
Rehorek, L., Dlouhy, I., Chlup, Z.: Tensile Behaviour of Open Cell Ceramic Flaks, Ceramics – Silikáty 53 (4) (2009) 237-241.
Řehořek, L., Dlouhý, I., Chlup, Z.: Lomové chování keramicých pěn při tahovém zatěžování; Víceúrovňový design pokrokových materiálů, 2009, p. 103-114.
Dlouhý, I., Řehořek, L., Chlup, Z.: Tensile Properties of Open Cell Cermaic Foams; Key Engineering Materials. 2009. 409. p. 168-175.
Dlouhý, I.; Chlup, Z.; Hadraba, H.; Krahula, K. (ФИЗИКА ПРОЧНОСТИ И ПЛАСТИЧНОСТИ) Micromechanisms and micromechanics of fracture of TiAl intermetalics. Металлофиз. новейшие технол. (Metallofiz. Noveishie Tekhnol.). 2009. 31(1). p. 81-96. ISSN 1024-1809
Dlouhý, I., Chlup, Z., Hadraba, H., Kozák, V.: Fracture Behaviour of TiAl Intermetalics; Damage and Fracture Mechanics, Eds.: M. Elboujdaini, G. Pluvinage, 2009, p.265-274.
Dlouhý, I., Tarafder, M., Hadraba, H.: Micromechanical aspects of transgranular and intergranular failure competition; 63rd Annual Technical Meeting of the Indian Institute of Metals (NMD-ATM 2009), Kolkata, Indie, 2009, p. 151
Jurči, P., Dlouhý, I.: Příspěvek k lomovému chování PM ledeburických ocelí; Technologie tepelného zpracování kovových povrchů, Jihlava 2009, p. 31-38
Dlouhý, I., Chlup, Z., Hadraba, H.: Vliv povrchového tvrzení na lomové chování ocelí; Technologie tepelného zpracování kovových povrchů, Jihlava 2009, p. 111-120
Hadraba, H., Dlouhý, I.: Effect of thermal ageing on the impact fracture behaviour of Eurofer’97 steel. Journal of Nuclear Materials 386-388, 2009, p. 564-568.
Hadraba, H., Stratil, L., Dlouhý, I.: High temperature long service embrittlement of the RAFM EUROFER´97 steel; 63rd Annual Technical Meeting of the Indian Institute of Metals (NMD-ATM 2009), Kolkata, Indie, 2009, p. 151 - poster
Chlup, Z., Dlouhý, I., Gürbüz, S., Dericioglu, A.F., Kozák, V.: Interfacial characterisation in transparent spinel matrix reinforced by SiC fibre; Key Engineering Materials. 2009. 409. p. 252-259.
Chlup, Z., Cerny, M, Glogar, P, Dlouhy, I.: Fracture behaviour of partially pyrolysed long fibre unidirectional composite, in 11th International Conference and Exhibition of the European Ceramic Society, Krakow (2009)
Stratil, L., Hadraba, H., Dlouhý, I.: High temperature service embrittlement of EUROFER´97 steel; Development of new structural materials for advanced fission and fusion reactor systems. Barcelona, 2009 p. 49.
Stratil, L., Hadraba, H., Dlouhý, I.: Vlastnosti oceli Eurofer´97 pro vyvíjené fůzní a štěpné reaktory, Víceúrovňový design pokrokových materiálů, 2009, p. 65-74.
Stratil, L., Hadraba, H., Dlouhý, I.: High temperature service embrittlement of EUROFER´97 steel; Fraktografia 2009. Strará Lesná (SK).
2008
Řehořek, L., Chlup, Z., Dlouhý, I., Boccaccini, A. R.: Changes in Fracture Micromechanism with Increasing Reinforcement Volume Fraction in Glass Matrix Composite; Materials Science Forum 567-568 ,2008, 369-372 (Materials Structure and Micromechanical of Fracture V; ISBN / ISBN-13 : 0-87849-469-3 / 978-0-87849-469-9)
Dlouhý, I., Strnadel, B.: The effect of crack propagation mechanism on the fractal dimension of fracture surfaces in steel; Engineering Fracture Mechanics 75, 2008, 3-4, 726-738
Dlouhý, I., Jurášek L., Holzmann, M.: The effect of Lüders’ flow on brittle fracture initiation in pearlitic steel; Materials Science Forum 567-568 ,2008, 413-416 (Materials Structure and Micromechanical of Fracture V; ISBN / ISBN-13 : 0-87849-469-3 / 978-0-87849-469-9)
Dlouhý, I., Kotoul, M., Vysloužil, T., Chlup, Z., Boccaccini, A. R.: Crack resistance curve in glass matrix composite reinforced by long SiC fibres; Journal of Materials Science 43, No. 12, pp. 4022–4030, DOI 10.1007/s10853-007-2317-z.
Boccaccini, D. N., Cannio, M., Volkov-Husoviæ, T. D., Kamseu, E., Romagnoli, M., Veronesi, P., Leonelli, C., Dlouhý, I., Boccaccini, A. R.: Service life prediction for refractory materials; Journal of Materials Science 43, No. 12 (2008), pp. 4079–4090, DOI 10.1007/s10853-007-2315-1.
Kotoul, M., Vysloužil, T., Boccaccini, A. R., Dlouhý, I.: Crack growth in glass matrix composite reinforced by long SiC fibres; Theoretical and applied fracture mechanics 49, No. 2, 2008, pp. 158-170 doi:10.1016/j.tafmec.2007.11.001.
Dlouhý, I., Hadraba, H., Chlup. Kozák, V, M. Holzmann: Současné koncepce hodnocení křehkolomových charakteristik ocelí (významné pro hodnocení lomové odolnosti svaru); konf. Zvariteľnosť a degradačné mechanizmy vlastností TOO zvarových spojov, pozvaná přednáška od IBOK a.s. (pořádané ve spolupráci se Slovenskou zváračskou spoločnosťou).
Brumek, J., Strnadel, B., Dlouhý, I.: Inentification of Elastic Plastic Isotropic Parameters Using Inverse Analysis of Instrumented Indentation Technique; New Methods of Damage and Failure Analysis of Structural Parts, Ostrava, 2008, pp. 359-364.
Strnadel, B., Dlouhý, I.: Fractalanisotropy and Heterogeneity of Fracture Surfaces in Steel; New Methods of Damage and Failure Analysis of Structural Parts, Ostrava, 2008, pp. 365-372.
Iino, Y., Švejcar, J., Dlouhý, I., Forejt, M.: Effect of Strain Rate 10-4 to 103 s-1 on Room Temperature Tensile Properties and Notched Plastic Zone of Type 304 stainless Steel; 17th Eutopean conference on Fracture, Brno, 2008, pp. 773-779.
Dlouhý, I.: Lomová houževnatost křehkých materiálů; teze přednášky k profesorskému jmenovacímu řízení v oboru materiálové inženýrství, Brno, 2008, str. 1-26.
Dlouhý, I.; Chlup, Z., Kozák, V.: Micromechanisms and Micomechanics of Fracture of TiAl Intermetalics; Meždunarodnaja konferencija „Sovremennyje problemy fiziki metallov“; 7-9.10.2008, Kyjev, Ukrajina
Dlouhý, I., Řehořek, L., Chlup, Z.: Tensile properties of open cell ceramic foams; Tensile properties of open cell ceramic foams; Fractography of Advanced Ceramics III, Stará Lesná, Slovensko, 2008.
I. Dlouhý, H. Hadraba, T. Šmída, J. Babjak: Predikce teplotní závislosti lomové houževnatosti z parametrů tahových zkoušek (Prediction of Fracture Toughness Temperature Diagram from Tensile Test Parmaeters); 22nd International conference on Heat Treatment, Brno, 2008, s. 11-20.
Dlouhý, I., Chlup, Z., Hadraba, H., Kozák, V.: Fracture behaviour of TiAl intermetalics; 1ST AFRICAN INTERQUADRENNIAL ICF CONFERENCE, DAMAGE AND FRACTURE MECHANICS;FAILURE ANALYSIS OF ENGINEERING MATERIALS AND STRUCTURES. JUNE 1 – 5 JUIN 2008, AIC International Conference of Fracture, Algiers, 2008, Proc. on CD ROM (bude v Springer Book)
Dlouhý, I., Chlup, Z., Hadraba, H., Kozák, V.: Fracture Toughness and Fracture Mechanisms in TiAl Based Intermetalics; New Methods of Damage and Failure Analysis of Structural Parts, Ostrava, 2008, pp. 235-243.
Kotoul, M.; Pokluda, J.; Šandera, P. Dlouhý, I.; Chlup, Z.; Boccaccini, A.R.: Toughening effects quantification in glass matrix composite reinforced by alumina platelets. Acta Materialia. 2008. 56(12). p. 2908-2918.
Hadraba, H., Němec, O., Dlouhý, I.: Conversion of transgranular to intergranular fracture in NiCr steels; Engineering Fracture Mechanics 75 (2008) 12, pp. 3677-3691, DOI 10.1016/j.engfracmech.2007.08.006.
Hadraba, H., Dlouhý, I.: Fracture Behaviour of RAFM stee Eurofer´97 after Thermal Ageing; New Methods of Damage and Failure Analysis of Structural Parts, Ostrava, 2008, pp. 225-233.
Hadraba, H., Dlouhý, I.: Fracture Behavior of EUROFER´97 Steel After Thermal Ageing; 17th Eutopean conference on Fracture, Brno, 2008, pp. 1389-1396.
Hadraba, H., Dlouhý, I.: Zkřehnutí oceli EUROFER´97 v důsledku tepelné expozice (Embrittlement of EUROFER´97 steel due to thermal exposition); 22nd International conference on Heat Treatment, Brno, 2008, s. 65-72.
Chlup, Z., Dlouhý, I., Gürbüz, S., Dericioglu, A.F., Kozák, V.: Interfacial characterisation in transparent spinel matrix reinforced by SiC fibre, Fractography of Advanced Ceramics III, Stará Lesná, Slovensko, 2008.
Chlup, Z., Flašar, P., Kotoji, A., Dlouhý, I.: Fracture behaviour of Al2O3/SiC nanocomposite ceramics after crack healing treatment; Journal of the European Ceramic Society 28 ,2008, 1073-1077
Chlup, Z., Flašar, P., Dlouhý, I.: Response of Inherently Brittle Materials on Higher Loading Rates; 17th Eutopean conference on Fracture, Brno, 2008, pp. 659-666.
Kozák, V., Dlouhý, I., Chlup, Z.: Cohesive zone model and GTN model collation for ductile crack growth; Materials Science Forum 567-568 ,2008, 145-148 (Materials Structure and Micromechanical of Fracture V; ISBN / ISBN-13 : 0-87849-469-3 / 978-0-87849-469-9)
Kozák, V., Dlouhý, I.: A Crack Growth Modelling in Materials with Heterogeneous Microstructure; 17th Eutopean conference on Fracture, Brno, 2008, pp. 350-357.
Dlouhý A., Dočekalová K., Bartak T., Dlouhý I., Zemčík L.: Refractory crucible melting and related mechanical properties of Nb-Containing TiAl Alloys; Structural Aluminides for Elevated Temperatures, TMS Meeting 2008; pp. 9-14.
2007
Flašar, P., Chlup, Z., Dlouhy, I.: Měření dynamické lomové houževnatosti inherentně křehkých materiálů zkouškou rázem v ohybu, In Víceúrovňový design pokrokových materiálů, Sborník doktorské konference 2007, ISBN 978-80-254-0793-6, Dlouhý Ivo a kol., Brno, ÚFM AVČR, 2007, 115-126.
Flašar, P., Chlup, Z., Dlouhý, I.: Stanovení dynamických charakteristik inherentně křehkých materiálů pomoci zkoušky rázem v ohybu, In Porušování a design materiálů, Sborník semináře Křehký lom 2007, ISBN 978-80-254-0725-7, Dlouhý Ivo, Brno, ÚFM AVČR, 2007, 183-194.
Řehořek, L., Chlup, Z., Dlouhý, I.: Tahové zkoušky vysoce porézních keramických materiálů, In Víceúrovňový design pokrokových materiálů, Sborník doktorské konference 2007, ISBN 978-80-254-0793-6, Dlouhý Ivo a kol., Brno, ÚFM AVČR, 2007, 127-136.
Kotrechko, S., Strnadel, B., Dlouhý, I.: Fracture toughness of cast ferritic steel applying local approach, Theoretical and applied fracture mechanics, Vol. 47, Issue 2 , April 2007, pp 171-181.
Boccaccini, D.N., Leonelli, C., Romagnoli, M., G. C. Pelacani, Veronesi, P., Dlouhý, I., Boccaccini, A.R.: Thermal shock behaviour of mullite-cordierite refractory materials; Advances in Applied Ceramics, Vol. 106, No. 3, 2007, pp. 142-148.
Kotoul, M., Pokluda, J., Šandera, P., Dlouhý, I., Chlup, Z., Boccaccini, A.: Experimental and theoretical investigation of fracture in glass matrix composites reinforced by alumina platelets; sb. Fracture Mechanics of Concrete and Conctere Structures, Vol. 3, Ed. Al. Carpinteri, P.G. Gambarova, G. Rerro, G.A. Plizzari, vyd. Taylor Francis, London 2007, ISBN 978-041-544-0660 (6th International Conference, Catania, Italy, June 17-22.2007), 1691-1698.
Dlouhý, I., Chlup, Z., Hadraba, H., Kozák, V.: Lomová houževnatost a mechanismy porušování u intermetalika na bázi TiAl, In Porušování a design materiálů, Sborník semináře Křehký lom 2007, ISBN 978-80-254-0725-7, Dlouhý Ivo, Brno, ÚFM AVČR, 2007, 169-182.
Kotoul, M., Pokluda, J., Šandera, P., Dlouhý, I., Chlup, Z., Boccaccini, A.R.: Kvantifikace zvyšování houževnatosti kompozitů typu sklená matrice/korundové destičky, In Porušování a design materiálů, Sborník semináře Křehký lom 2007, ISBN 978-80-254-0725-7, Dlouhý Ivo, Brno, ÚFM AVČR, 2007, 243-262.
Šmída, T., Babjak, J., Dlouhý, I.: Predikce referenční teploty z parametrů tahových zkoušek; Porušování a design materiálu, In Porušování a design materiálů, Sborník semináře Křehký lom 2007, ISBN 978-80-254-0725-7, Dlouhý Ivo, Brno, ÚFM AVČR, 2007, 33-46
Brumek, J., Strnadel, B., Dlouhý, I.: Využití instrumentované indentační zkoušky při h odnocení mechanických vlastností, In Porušování a design materiálů, Sborník semináře Křehký lom 2007, ISBN 978-80-254-0725-7, Dlouhý Ivo, Brno, ÚFM AVČR, 2007, 123-128.
Polena, J., Dlouhý, I.: Transparentních kompozity s keramickou a skelnou matricí, Porušování a design materiálu, In Porušování a design materiálů, Sborník semináře Křehký lom 2007, ISBN 978-80-254-0725-7, Dlouhý Ivo, Brno, ÚFM AVČR, 2007, 231-242.
Brumek, J., Strnadel, B., Dlouhý, I.: Použití inverzní MKP analýzy ke stanovení materiálové křivky na základě indentační zkoušky; Víceúrovňový design pokrokových materiálů ´07, Ostrava, 2007, s. 61-68.
Kotrechko, S., Strnadel, B., Dlouhý, I.: Fracture toughness of cast ferritic steel applying local approach; Annual Proceeding of Science and Technology at VŠB-TUO, ISBN 978-80-248-1662-3, Ostrava, 2007, 62-67.
Hadraba, H., Dlouhý, I.: Vysokoteplotní provozní zkřehnutí oceli eurofer´97, Porušování a design materiálu, In Porušování a design materiálů, Sborník semináře Křehký lom 2007, ISBN 978-80-254-0725-7, Dlouhý Ivo, Brno, ÚFM AVČR, 2007, 85-96.
Chlup, Z., Boccaccini, A.R., Dlouhy, I.: Fracture Toughness abd Surface Roughness Characteristics of Glass Matrix Composite Reinforced By Alumina Platelets, Proceedings of the 1st International Congress on Ceramics : A Global Roadmap, Ed. Stephen Freiman, 2007, on CD
Chlup, Z., Flasar, P., Dlouhy, I., Hadraba, H.: Assessment of Fracture Resistance of Structural Ceramics at Higher Strain Mates, 10th International Conference and Exhibition of the European Ceramic Society, Estrel convention Center, Berlin, June 17 - 21, 2007, on CD, in press
Chlup, Z., Flasar, P., Kotoji, A., Dlouhy, I.: Fracture behaviour of Al2O3/SiC nanocomposite ceramics after crack healing treatment, Journal of the European Ceramic Society, In Press, Corrected Proof, Available online 8 November 2007.
Chlup, Z., Dlouhý, I., Hadraba, H., Flašar, P., Řehořek, L.: Vliv podmínek zatěžování na hodnoty lomové houževnatosti keramik, In Porušování a design materiálů, Sborník semináře Křehký lom 2007, ISBN 978-80-254-0725-7, Dlouhý Ivo, Brno, ÚFM AVČR, 2007, str. 209-218.
Chlup, Z., Flašar, P., Dlouhý, I., Hadraba, H.: Assessment of Fracture Resistance of Structural Ceramics at Higher Strain Rates; Proc. 10th International European Ceramic Society Conference, 2007, Berlin, pp. 1236-1240, ISBN 3-87264-022-4.
Kozák, V., Dlouhý, I., Chlup, Z.: Cohesive zone model and GTN model collation for ductile crack growth; MSMF-5, Abstracts Booklet, Brno 2007, s.46 (Materials Science Forum 567-568 ,2008, 145-148)
2006
Flašar, P., Dlouhý, I., Chlup, Z., Ando, K.: Crack healing behaviour of Al2O3/SiC nanocomposite ceramics; New Methods of Damage and Failure Analysis of Structural Parts, Ostrava, 2006, pp. 215-222.
Wu, J.P., Dlouhý, I., Chlup, Z., Rawlings, Boccaccini, A.R.: Waste Not, Want Not: An Inexpensive Glass-Ceramic from Waste; American Ceramic Society Bulletin, Vol. 85, No.5, pp. 29-33.
Wu, J.P., Dlouhý, I., Chlup, Z., Rawlings, Boccaccini, A.R.: A Glass Ceramic Derived from High TiO2-Containing Slag – Microstructure Development and Mechanical Behaviour, Journal of the American Ceramic Society, 2006, Vol. 89, No. 8, pp. 2426-2433.
Dlouhý, I., Holzmann, M.: Micromechanical aspects of transgranular and intergranular failure competition, ECF 16, Alexandropoulis, 2006, on CD + sborník abstraktů
Dlouhý, I., Hadraba, H., Zbořil, J.: Lokální mechanické vlastnosti svarového spoje perlitické a bainitické kolejnicové oceli; Bulletin Asociace strojních inženýrů, č. 37, červenec 2006, str. 15-19.
Dlouhý, I., Hadraba, H., Jurášek, L.: Local approach use at solution of fracture parameters transferability; New Methods of Damage and Failure Analysis of Structural Parts, Ostrava, 2006, pp. 195-205.
Stoll, E., Mahr, P., Krüger, H-G., Kern, H., Dlouhý, I., Boccaccini, A. R.: Progress in the characterisation of structural oxide/oxide ceramic matrix composites fabricated by electrophoretic deposition (EPD); Advanced Engineering Materials, Vol. 8, No. 5, pp. 282-285.
Boccaccini, D. N., Kamseu, E., Volkov-Husović, T. D., Cannio, M., Romagnoli, M., Veronesi, P., Leonelli, C., Dlouhý, I., Boccaccinni, A. R.: Characterization of thermal shock damane in cordierite-mullite refraktory materials by non-destructive methods; 4th Balkan Conference on Metalurgy „Scientific achievements and perspectives of metals industry in South-East Europe“, 2006, Serbia, pp. 503-508.
Hadraba, H., Dlouhý, I., Kohout, J.: Lokální mechanické vlastnosti svarového spoje perlitické a bainitické kolejnicové oceli; Sborník semináře „Lokálne mechanické vlastnosti“, ISBN 80-8073-405-4, na CD, Košice, 2005.
Jurášek, L., Holzmann, M., Dlouhý, I.: Local approach use at solution of fracture parameters transferability, ECF 16, Alexandropoulis, 2006, on CD + sborník abstraktů
Chlup, Z., Dlouhy, I.: Size Effect in Fracture Toughness Determination of Brittle Materials, Advances in Science and Technology Vol. 45 (2006) pp. 101-106
Kozák, V., Chlup, Z., Dlouhý, I.: Použití kohezních prvků pro modelování šíření trhliny; Bulletin Asociace strojních inženýrů, č. 37, červenec 2006, str. 20-24.
2005
Dlouhý, I., Chlup, Z., Boccaccini, A. R.: Fracture behaviour of brittle (glass) matrix composites; Materials Science Forum, Vol. 482, 2005, pp. 115-122.
I. Elayachi, G. Pluvinage, M. O. Bensalah, Michel Lebienvenu, I. Dlouhý: To Joint Effect of Temperatura and Noch Root Radius on Fracture Toughness; Engineering MECHANICS, Vol. 12, 2005, Vo. 1, pp. 11-22.
A. R. Boccaccini, S. Atiq, D. N. Boccaccini, I. Dlouhý, C. Kaya: Frature behaviour of mullite fibre reinforced-mullite matrix composites under quasi-static and ballistic impact loading; Composites Science and Technology, Vol. 65, 2005, pp. 325-333.
A. F. Dericioglu, A. Boccaccini, I. Dlouhý, Y. Kagawa: Effect of Cemical Composition on the Optical Properties and Fracture Toughness of Transparent Magnesium Aluminate Spinel Ceramics; Materials Transaction, Vol. 46, No. 5, 2005, pp. 996-1003.
I. Dlouhý, Z. Chlup: Fracture Resistance Evaluation of Fibre Reinforced Brittle Matrix Composites; Key Engilneering Materials, Vol. 290, 2005, pp. 167-174.
I. Dlouhý, Z. Chlup, S. Atiq, A. R. Boccaccini: Fracture Rezistance of Hybrid Glass Matrix Composite and its Degradation due to Thermal Ageing and Thermal Shock; Fracture Mechanics of Ceramics. Active Materials, Nanoscale Materials, Composites, Glass, and Fundamentals; Eds. R.C. Bradt, D. Munz, M. Sakai, K.W. White; ISBN 0-387-24134-5, 2005, Springer Science+Business Media, Inc., pp. 263-274.
M. Kotoul, A. R. Boccaccini, I. Dlouhý: Quantification of Toughness Increase Due to Metal Particles in Glass Matrix Composites; Fracture Mechanics of Ceramics. Active Materials, Nanoscale Materials, Composites, Glass, and Fundamentals; Eds. R.C. Bradt, D. Munz, M. Sakai, K.W. White; ISBN 0-387-24134-5, 2005, Springer Science+Business Media, Inc., pp. 245-261.
S. Kotrechko, B. Strnadel, I. Dlouhý: Predikce lomové houževnatosti Mn oceli na odlitky pomocí lokálního přístupu; Materiálové inžinierstvo – Materials Engineering, vyd. Žilina (SK), Ročník – Volume XII, Číslo – Issue 4/2005. s. 25-31.
H. Hadraba, I. Dlouhý, M. Holzmann, J. Zbořil: Lomové chování svarů perlitické a bainitické kolejnicové oceli; Sborník přednášek konference s mezinárodní účastí TechMat 05 "Perspektivní technologie a materiály pro technické aplikace", Svitavy, 2005, s. 59-62.
Z. Chlup, I. Dlouhý, A. R. Boccaccini, D. N. Boccaccini, C. Leonelli, M. Romagnoli: Thermal Shock Resistance of Cordierite-Mullite Refractory Composites; Key Engineering Materials, Vol. 290, 2005, pp. 260-263.
K. Krahula, I. Dlouhý: Struktura a základní mechanické vlastnosti intermetalik na bázi TiAl; Víceúrovňový design pokrokových materiálů, sborník doktorské konference, 2005, s. 95-102.
2004
Dlouhy, I., Chlup, Z.: Fracture Resistance Evaluation of Fibre Reinforced Brittle Matrix Composites, Fraktografie (2004) Stará Lesná, pp. 167-174.
Dlouhy, I., Chlup, Z. ,Chawla, K. K., Kulkarni, R., Koopman, M., Boccaccini, A. R.: Effect of static pre-loading on fracture toughness of Nicalon® fibre glass matrix composite, Materials Science and Engineering A, Volume 367, Issues 1-2, 2004, pp. 17-23.
Dlouhý, I., Chlup, Z., Kozák, V.: Constraint effects at brittle fracture initiation in a cast ferritic steel, Engineering Fracture Mechanics, Vol. 71, 2004, pp.873-883.
C. Leonelli, D. N. Boccaccini, M. Romagnoli, P. Veronesi, I. Dlouhy, A. R. Boccaccini: Microstructural investigation and thermal shock behaviour of mullite-cordierite refractory materials; 17th National Conference of Italian Group of Fracture – IGF 17, Bologna, 2004, pp. 87-91 + CD.
I. Dlouhý, M. Holzmann, J. Zbořil: Lomové chování svarů perlitické a bainitické oceli; mezinárodní konf. 20. dny tepelného zpracování, Jihlava, 2004, s. 19-26.
I. Dlouhý, Z. Chlup, A. R. Boccaccini: Lomová houževnatost a mikromechanismy lomu vláknových kompozitů s křehkou matricí; Sborník semináře Křehký lom 2004, Brno, 2004, s. 43-54.
M. Kotoul, I. Dlouhý: Metal particles constraint in glass matrix composites and its impact on fracture toughness enhancement; Materials Science and Engineering A 387-389, 2004, pp. 404-408.
I. Dlouhý, Z. Chlup, V. Kozák: Fracture Toughness Transferability – from Small to Full Scale Specimens; Conf. Fracture Damage of Structural Parts, Ostrava, 2004, pp. 53-60.
M. Kotoul, I. Dlouhý, T. Vysloužil: Crack bridging and trapping in borosilicate matrix composites with distributed metal particles; The 15th European Conference of Fracture. Advanced Fracture Mechanics for Life and Safety Asessments (ECF 15), Stockholm, 2004, on CD.
I. Dlouhý, Z. Chlup, A. R. Boccaccini: Fracture resistance degradation of hybrid glass matrix composite; The 15th European Conference of Fracture. Advanced Fracture Mechanics for Life and Safety Asessments (ECF 15), Stockholm, 2004, on CD.
I. Dlouhý, Z. Chlup, A. R. Boccaccini: Fracture behaviour of brittle (glass) matrix composites; MSMF – 4, Brno, 2004 , key lecture, s. 89.
I. Dlouhý, G. Pluvinage, M. Holzmann: Strain Rate Effects, Transition Behaviour and Master Curve Concept; Revue Internationale d'Ingénierie des Systèmes de Production Mécanique, No. 8, ENIM, France, 2004, pp. IV16-IV22.
I. Dlouhý, Z. Chlup, V. Kozák: Constraint Effects at Brittle Fracture Initiation in a Cast Ferritic Steel; Engineering Fracture Mechanics, Vol. 71, No. 4-6, 2004, pp. 873-883.
Chlup, Z., Dlouhý, I.: High temperature tensile properties of quasicrystalline Al alloy; Nano 04, Brno, 2004, p.63.
Chlup, Z., Dlouhý, I., Boccaccini, A. R., Boccaccini, D. N.: Thermal shock resistance of cordierite-mullite refractory composites, Key Engineering Materials Vol. 290 (2005) pp. 260-263
Z. Chlup, I. Dlouhý: Vliv geometrie zkušebních vzorků na charakteristiky houževnatosti křehkých materiálů; Sborník semináře Křehký lom 2004, Brno, 2004, s. 85-94.
Z. Chlup, I. Dlouhý, A. R. Boccaccini, K. K. Chawla: Fracture Behaviour of Fibre Reinforced Brittle Matrix Composites; Conf. Fracture Damage of Structural Parts, Ostrava, 2004, pp. 31-38.
2003
Dlouhy, I., Chlup, Z., Boccaccini, D. N., Atiq, S., Boccaccini, A. R.: Fracture Behaviour of Hybrid Glass Matrix Composites: Thermal Ageing Effects; Composites: Part A 34, 2003, pp. 1177-1185.
Y. A. Garasim, I. Dlouhý, S. P. Oshkadyorov: Hardening heat treatment of high-strength constructional steels with usage of effect of inexact homogenisation; Metallofizika i noveishie tekhnologii, Vol. 25, No. 7, 2003, pp. 935-958.
O. Němec, I. Dlouhý, J. Tomáš, B. Strnadel: Kvantifikace napěťově kontrolovaných mikromechanismů porušení nízkolegované NiCr oceli; Fraktografia – Fractography 2003, Strará Lesná, Slovak Republic, s. 170-178.
G. Pluvinage, G. Lenkey, I. Dlouhý: Design Against Brittle of Elastic-Plastic Fracture of Nuclear Waste Container; 17th International Conference on Structural Mechanics in Reactor Technology, Praha, 2003, Paper # G03-6 on CD.
M. Kotoul, I. Dlouhý: Limited fracture toughness enhancement due to metal particles embrittlement in glass matrix composites; 9th International Conference on The Mechanical Behaviour of Materials - ICM 9, Palexpo Congress Center, Geneva, Switzerland, 2003.
I. Dlouhý, J. Kohout, L. Jurášek, M. Holzmann: Evaluation of Strain Rate Effects on Transition Behaviour Applying the Master Curve Methodology; 17th International Conference on Structural Mechanics in Reactor Technology, Praha, 2003, Paper # G04-5 on CD
M. Kotoul, A. R. Boccaccini, I. Dlouhý: Quantification of Toughness Increase Due to Metal Particles in Glass Matrix Composites; Fracture Mechanics of Ceramics 8, Houston, 2003.
I. Dlouhý, Z. Chlup, A. R. Boccaccini: Fracture Resistance of Hybrid Glass Matrix Composite and its Degradation Due to Thermal Ageing and Thermal Shock; Fracture Mechanics of Ceramics 8, Houston, 2003
I. Dlouhý, L. Jurášek, M. Holzmann: Stranin Rate Efects, Transition Behaviour and Master Curve Concept; Conf. New Trends in Fatigue and Fracture, Hammamet, Tunisia, 2003, on CD.
A. R. Boccaccini, R. D. Rawlings, I. Dlouhý: Reliability of the Chevron-notch technique for fracture toughness determination in glass; Material Science and Engineering A347, 2003, pp. 102-108.
O. Němec, I. Dlouhý, B. Strnadel: Vliv podmínek šíření trhliny na dimenzi fraktálu lomové plochy; Kovové Materiály 41, č. 3, 2003, s.177-192.
M. Holzmann, I. Dlouhý: Mechanické vlastnosti a lomové chování oceli na odlitky s bainitickou strukturou a její využití v srdcovkách výhybek; Hutnické listy 57, č. 12, 2003, s. 8-20.
M. Holzmann, I. Dlouhý, J. Zbořil: Mechanické vlastnosti a lomové chování baintické oceli na odlitky a její využití v srdcovkách výhybek; Vědeckotechnický sborník Českých drah, 2003, s. 81-96.
2002
I. Dlouhy, Z. Chlup, A.R. Boccaccini: Applicability of the Chevron-Notch Technique for Fracture Toughness Determination in Glass; ECF 14 - Fracture Mechanics Beyond 2000, Volume I/III, Cracow, Poland, 2002, pp. 481-489.
I. Dlouhý, J. Zbořil, M. Holzmann: Bainitická ocel na srdcovky výhybek - vývoj a vlastnosti; Sborník konf. 19. dny tepelného zpracování s mezinárodní účastí, Brno, 2002, s. 93-102.
I. Dlouhý, B. Strnadel: Závislost dimenze fraktálu lomové plochy na mechanismu šíření trhliny; Hutnické listy, č. 6-8, 2002, pp. 46-54.
I. Dlouhý: Habilitační práce: Lomové chování progresívních ocelí a keramik; 2002, Brno, s. 1-57 + přílohy.
I. Dlouhý, G. Lenkey, M. Holzmann: Master Curve Validity for Dynamic Fracture Toughness Characteristics; Transferability of Fracture Mechanical Characteristics, I. Dlouhy Ed., 2002, Kluwer Academic Publishers, Dordrecht, Netherlands, pp. 243-254.
I. Dlouhý, V. Kozák, M. Holzmann: Toughness Scaling Model Applications; Transferability of Fracture Mechanical Characteristics, 2002, Kluwer Academic Publishers, Dordrecht, Netherlands, pp. 195-212.
B. Strnadel, I. Dlouhý: Probability of Brittle Fracture in Low Alloy Steels; Transferability of Fracture Mechanical Characteristics, 2002, Kluwer Academic Publishers, Dordrecht, Netherlands, pp. 151-166.
I. Dlouhý, M. Holzmann, Z. Chlup: Fracture Resistance of Cast Ferritic C-Mn Steel for Container of Spent Nuclear Fuel; Transferability of Fracture Mechanical Characteristics, 2002, Kluwer Academic Publishers, Dordrecht, Netherlands, pp. 47-64.
I. Dlouhý, V. Kozák, Z. Chlup: Fracture toughness transferability - from small to full scale specimens; New Trends in Fatigue and Fracture, Francie, Metz, 2002, on CD.
I. Dlouhý, M. Reinisch, A. R. Boccaccini: Fracture toughness and work of fracture of SiC-fibre reinforced glass matrix composite; Fracture Mechanics of Ceramics; Crack-Microstructure Interaction, R-Curve Behavior, Environmental Effects in Fracture, and Standardization, 2002, Kluwer Academic/Plenum Publishers, New York, pp. 203-212.
I. Dlouhý, Z. Chlup, M. Holzmann: Master Curve Evaluation at Static and Dynamic Conditions of Loading (for Cast Ferritec Steel and Pressure Vessel Steels); IAEA TECDOC, Praha, 2001, pp. 177–188.
L. Jurášek, J. Kohout, M. Holzmann, I. Dlouhý: Statistické a fyzikální aspekty použití koncepce master křivky při hodnocení vlivu rychosti zatěžování na tranzitní chování ocelí; Sborník příspěvků semináře: Únava a lomová mechanika 2002, Metodické a aplikační problémy, Žinkovy, Česká republika, 2002.
M. Holzmann, L. Jurášek, I. Dlouhý: Master Curve Methodology and Data Trensfer from Small on Standard Specimens; Transferability of Fracture Mechanical Characteristics, I. Dlouhy Ed., 2002, Kluwer Academic Publishers, Dordrecht, Netherlands, pp. 225-242.
J. Kohout, L. Jurášek, M. Holzmann, I. Dlouhý: Evaluation of Strain Rate Effects on Transition Behaviour Applying the Master Curve Methodology; Transferability of Fracture Mechanical Characteristics, I. Dlouhy Ed., 2002, Kluwer Academic Publishers, Dordrecht, Netherlads, pp. 255-270.
M. Holzmann, L. Jurášek, I. Dlouhý: Aplikace koncepce základní křivky pro hodnocení vlivu rychlosti zatěžování na tranzitní chování ocelí; Zváranie, Roč. 51, č. 5-6, 2002, pp. 93 – 97.
Z. Chlup, I. Dlouhý: Mikromechanistické aspekty vlivu délky trhliny na lomovou houževnatost, Kovové materiály 40, č. 4, 2002, pp.254-267.
Z. Chlup, I. Dlouhý: Micromechanical Aspects of Constraint Effect at Brittle Fracture Initiation; Transferability of Fracture Mechanical Characteristics, I. Dlouhy Ed., 2002, Kluwer Academic Publishers, Dordrecht, Netherlands, pp. 65-78.
V. Kozák, I. Dlouhý: Weibull stress model in cleavage fracture and toughness scaling model; XXX Summer School "Advanced Problems in Mechanics", St. Petersburg (Repino), Russia, 2002 (sborník 2003), pp. 384-389.
V. Kozák, I. Dlouhý, M. Holzmann: The fracture behaviour and its predicion based on the local approach; Nuclear Eng. And Design, č. 212, 2002, pp. 67-73.
2001
I. Dlouhý, Z. Chlup, V. Kozák: Constraint Effects at Brittle Fracture Initiation in Cast Ferritic Steel; Joint Meeting of ESIS TC1 + TC8, Mol, Belgie, 2001, (abstract).
S. A. Kotrechko, Yu. Meshkov, I. Dlouhý: Computer simulation of effect of grain size distribution on Weibull parameters; Theoretical and Applied Fracture Mechanics 35, No.3, 2001, pp. 255-260.
I. Dlouhý, M. Holzmann: Vliv povrchového tvrzení na lomové chování ocelí na ozubená kola; konf. Cementace a nitridace, Brno, 2001, s. 155-164.
I. Dlouhý, Z. Chlup, M. Holzmann: Master Curve Evaluation at Static and Dynamic Conditions of Loading (for Cast Ferritec Steel and Pressure Vessel Steels); IAEA - Specialists´ Meeting on Master Curve Testing and Results Application, Praha, Česká republika, 2001, pp. přísp.č.16.
I. Dlouhý, O. Němec: Micromechanical Aspects of Transgranular and Intergranular Failure Competition; 3rd Int. Conference "Materials Structure and Micromechanics of Fracture" (MSMF-3), Brno, 2001, sborník na CD (sekce III).
I. Dlouhý, Z. Chlup, V. Kozák: Constraint Effects at Brittle Fracture Initiation in Cast Ferritic Steel; Conf.: Fracture and Damage Mechanics (FDM-2001), Milan, Italy, 2001, pp. 245-250.
I. Dlouhý, Z. Chlup, V. Kozák, M. Holzmann: Fracture Toughness Transferability - from Small to Full Scale Specimens; Charpy Centenary Conference - CCC 2001, Poitiers, Francie, 2001, pp. 817-824.
I. Dlouhý, G. Lenkey, M. Holzmann: Master curve evaluation at static and dynamic conditions of loading for cast ferritic steel; Structural Mechanics in Reactor Technology; SMIRT 16, 2001, Washington, DC, Proc. on CD (Paper#1597).
I. Dlouhý, M. Holzmann, Z. Chlup, V. Kozák: Současné koncepce hodnocení křehkolomových vlastností charakteristik ocelí; VII. vědecká konference "Predikce mechanických vlastností materiálů na základě strukturních charakteristik", Ski hotel v Novém Městě, 2001, s. 247-259.
M. Holzmann, L. Jurášek, I. Dlouhý: Aplikace koncepce Master křivky pro hodnocení vlivu rychlosti zatěžování na tranzitní chování ocelí; Sb. semináře Křehký lom, Brno, 2001, s. 33–40.
M. Holzmann, L. Jurášek, I. Dlouhý: Vliv rychlosti zatěžování na referenční teplotu T0 master křivky lomové houževnatosti; seminář Problémy lomové mechaniky, 2001, Brno, s. 31-39.
Z. Chlup, I. Dlouhý: Mikromechanické aspekty vlivu délky trhliny na lomovou houževnatost a tranzitní chování oceli; seminář Problémy lomové mechaniky, 2001, Brno, s. 48-59.
Z. Chlup, I. Dlouhý, A. R. Boccaccini: Fracture Toughness of Thermally Shocked SiC-Fibre Reinforced Glass Matrix Composite; High Temperature Ceramic Matrix Composites Conference, Mnichov, Německo, 2001, pp. 463-468.
V. Kozák, I. Dlouhý: The transferability of fracture toughness characteristics from point a view of the integrity of components with defects; Computational Methods and Experimental Measurements (CMEM 2001), Alicante, Španělsko, 2001, pp. 757-766.
V. Kozák, M. Holzmann, I. Dlouhý: The Transferability of Brittle Fracture Toughness Characteristics; Structural Mechanics in Reactor Technology; SMIRT 16, Washington, DC, 2001, Proc. on CD (Paper#1079).
2000
P. Matušek, M. Holzmann, I. Dlouhý: Neues Bewertungsverfahren für das Bruchverhalten von Vollräder mit vergüteter Oberfläche; 4. Schienenfahrzeugtagung Dresden Rad Schiene 2000, Dresden, 2000, s. 18-20.
Information leaflet
download pdf (1,3MB)



central european institute of technology



H2020-MSCA-ITN-2014-ETN




Last update
19. 09. 2017