test
Publications
2017
Luca Bertolla, Ivo Dlouhý, Peter Tatarko, Alberto Viani, Amit Mahajan, Zdeněk Chlup, Michael J. Reece, Aldo R. Boccaccini: Pressureless spark plasma–sintered Bioglass® 45S5 with enhanced mechanical properties and stress–induced new phase formation, Journal of the European Ceramic Society 37 (2017) 2727–2736.
Peter Tatarko, Zdeněk Chlup, Amit Mahajan, Valentina Casalegno, Theo G. Saunders, Ivo Dlouhý, Michael J. Reece: High temperature properties of the monolithic CVD β-SiC materials joined with a pre-sintered MAX phase Ti3SiC2 interlayer via solid-state diffusion bonding, Journal of the European Ceramic Society 37 (2017) 1205–1216.
Martin Černý, Zdeněk Chlup, Adam Strachota, Jana Schweigstillová, Jaroslava Svítilová, Martina Halasová: Rheological behaviour and thermal dilation effects of alumino-silicate adhesives intended for joining of high-temperature resistant sandwich structures, Journal of the European Ceramic Society 37 (2017) 2209–2216.
Jaroslav Kastyl, Zdenek Chlup, Frank Clemens, Martin Trunec: Mechanical properties of zirconia core-shell rods with porous core and dense shell prepared by thermoplastic co-extrusion, Journal of the European Ceramic Society 37 (2017) 2439–2447.
Zdenek Chlup, Radovan Zizka, Jakub Kania, Michal Pribyl: Fracture behaviour of teeth with conventional and mini-invasive access cavity designs, Journal of the European Ceramic Society 37 (2017) 4423–4429.
Martin Trunec, Zdenek Chlup: Subtractive manufacturing of customized hydroxyapatite scaffolds for bone regeneration, Ceramics International 43 (2017) 11265–11273.
Jakub Roleček, David Salamon, Zdeněk Chlup: Mechanical properties of hybrid composites prepared by ice-templating of alumina, Journal of the European Ceramic Society 37 (2017) 4279–4286.
Igor Moravčík, Jan Čížek, Josef Zapletal, Zuzana Kováčová, Jozef Veselý, Peter Minarik, Michael Kitzmantel, Erich Neubauer, Ivo Dlouhý: Microstructure and mechanical properties of Ni1,5Co1,5CrFeTi0,5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering; Materials and Design 119 (2017) 141–150.
D.N. Boccaccini, O. Sevecek, H.L. Frandsen, I. Dlouhy, P.V. Hendriksen: Determination of the bonding strength in solid oxide fuel cells’interfaces by Schwickerath crack initiation test; Journal of the European Ceramic Society, 37 (11), 2017, p. 3565-3578.
Hynek Hadraba, Zdenek Chlup, Antonin Dlouhy, Ferdinand Dobes, Pavla Roupcova, Monika Vilemova, Jiri Matejicek: Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy, Materials Science and Engineering: A 689 (2017) 252–256.
HOJNA A, DI GABRIELE F, HADRABA H, HUSAK R, KUBENA I, ROZUMOVA L, BUBLIKOVA P, KALIVODOVA J, MATEJICEK J: Fracture behaviour of the 14Cr ODS steel exposed to helium and liquid lead. J. Nucl. Mater. 490 (2017) 143–154.
Karel Maca, Vaclav Pouchly, Daniel Drdlik, Hynek Hadraba, Zdenek Chlup: Dilatometric study of anisotropic sintering of alumina/zirconia laminates with controlled fracture behaviour, Journal of the European Ceramic Society 37 (2017) 4287–4295.
Daniel Drdlik, Katarina Drdlikova, Hynek Hadraba, Karel Maca: Optical, mechanical and fractographic response of transparent alumina ceramics on erbium doping, Journal of the European Ceramic Society, Volume 37, Issue 14, November 2017, Pages 4265-4270.
Katarina Drdlikova, Robert Klement, Hynek Hadraba, Daniel Drdlik, Dusan Galusek, Karel Maca: Luminescent Eu3+-doped transparent alumina ceramics with high hardness, Journal of the European Ceramic Society 37 (2017) 4271–4277.
Jiří Matějíček, Monika Vilémová, Barbara Nevrlá, Lenka Kocmanová, Jakub Veverka, Martina Halasová, Hynek Hadraba: The influence of substrate temperature and spraying distance on the properties of plasma sprayed tungsten and steel coatings deposited in a shrouding chamber, Surface and Coatings Technology 318 (2017) 217-223.
V. Kozák, Z. Chlup, P. Padělek, I. Dlouhý: Prediction of the Traction Separation Law of Ceramics Using Iterative Finite Element Modelling, Materials Structure and Micromechanics of Fracture VIII (MSMF 8, Brno, 2016) 186-189. Solid State Phenomena (ISSN 1012-0394), 2017 Trans Tech Publications.
Kotrechko, S., Gryshchenko, V., Kozák, V., Dlouhý, I.: Method of Threshold Stress Determination for a Local Approach to Cleavage Fracture , Materials Structure and Micromechanics of Fracture VIII (MSMF 8, Brno, 2016) Solid State Phenomena (ISSN 1012-0394), 2017 Trans Tech Publications 281-285.
Kotrechko, S., Gryshchenko, V., Kozák, V., Dlouhý, I.: Method of Threshold Stress Determination for a Local Approach to Cleavage Fracture , Materials Structure and Micromechanics of Fracture VIII (MSMF 8, Brno, 2016) Solid State Phenomena (ISSN 1012-0394), 2017 Trans Tech Publications 281-285.
Filip Siska, Tingting Guo, Ludek Stratil, Jan Cizek, Matthew Barnett: Numerical study of stress distribution and size effect during AZ31 nanoindentation, Computational Materials Science 126 (2017) 393–399.
Filip Siska, Ludek Stratil, Jan Cizek, Alireza Ghaderi, Matthew Barnett: Numerical analysis of twin thickening process in magnesium alloys, Acta Materialia 124 (2017) 9-16.
Zalezak T., Siska F., Stratil L., Luptakova N., Smid M., Bartkova D., Svoboda J., Dlouhy A.
A Numerical Analysis of Deformation Processes in Oxide Dispersion-Strengthened Materials – Influence of Dislocation-Particle Interactions
Solid State Phenomena 258 (2017) p. 106-109
2016
L. Bertolla, I. Dlouhý, P. Tatarko, A. Viani, A. Mahajan, Z. Chlup, M. J. Reece, A. R. Boccaccini: Spark plasma-sintered Bioglass® 45S5 with enhanced mechanical properties and stress-induced new phase formation, Fractography of Advanced Ceramics, Smolenice, 2016.
Yamen Othmani, Thomas Böhlke, Tanja Lube, Andreas Fellmeth, Zdenek Chlup, Francesco Colonna, Adham Hashibon: Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data, Journal of the European Ceramic Society 36 (2016) 1109-1125.
C. Krautgasser, Z. Chlup, P. Supancic, R. Danzer, R. Bermejo: Influence of subcritical crack growth on the determination of fracture toughness in brittle materials, Journal of the European Ceramic Society, 36 (2016) 1307-1312.
Rahul Raga, Iyas Khader, Zdenek Chlup, Andreas Kailer: Damage initiation and evolution in silicon nitride under non-conforming lubricated hybrid rolling contact, Wear 360-361 (2016) 147–159.
P. Tatarko, Z. Chlup, V. Casalegno, M. Salvo, I. Dlouhý, M. Ferraris, M.J. Reece: Room and high temperature failure of advanced SiC-based joined components with a MAX phase interlayer, Fractography of Ceramics, Smolenice, 2016.
CHLUPOVÁ A, CHLUP Z, KRUML T: Fatigue properties and microstructure of quasicrystalline AlFeCrTi alloy. Int. J Fatigue 91 (2016) 251–256.
Boccaccini, D.N., Sevecek, O., Frandsen, H.L., Dlouhy, I., Molin, S., Cannio, M., Hjelm, J., Hendriksen, P.V.: Investigation of the bonding strength and bonding mechanisms of SOFCs interconnector-electrode interfaces; Materials Letters 162 (2016) 1, 250-253.
Sobotová, J., Jurči, P., Dlouhý, I.: The effect of subzero treatment on microstructure, fracture toughness, and wear resistance of Vanadis 6 tool steel; Materials Science & Engineering A 652 (2016) 192–204.
Falat, L., Kepič, J., Čiriprova, L., Ševc, P., Dlouhý, I.: The effects of postweld heat treatment and isothermal aging on T92 steel heat-affected zone mechanical properties of T92/TP316H dissimilar weldments; Journal of Materials Research 31 (10) 2016, p. 1532-1543.
Dlouhý, I., Chlup, Z., Hadraba, H., Řehořek, L.: Response of alumina foam to tensile mechanical loading including stress concentrator effect; Procedia Materials Science 12, 2016, p. 106 – 111. (Conf. 6th New Methods of Damage and Failure Analysis of Structural Parts [MDFA], 2014).
I. Dlouhý, L. Stratil, H. Fukutomi, M. Hasegawa: Crack resistance characterisation TiAl intermetallics showing enhanced toughness; 7th Int. Conference New Methods of Damage and Failure Analysis of Structural Parts [MDFA], 2016, Japan, Book of Abstract, 5-6.
I. Dlouhý, L. Stratil, F. Šiška: Subsized specimens for fracture resistence characterisation including transferability issues; 7th Int. Conference New Methods of Damage and Failure Analysis of Structural Parts [MDFA], 2016, Japan, Book of Abstract, 7-8.
I. Dlouhý: Response of the foam ceramics to mechanical loading, Yokohama National University, Institute of Advanced Sciences, invited lecture (unpublished) (2016)
Hynek Hadraba, Zdenek Chlup, Daniel Drdlik, Jaroslav Cihlar: Micro-fibres containing composites prepared by EPD, Journal of the European Ceramic Society, Volume 36, Issue 2, January 2016, Pages 365-371.
Daniel Drdlik, Martin Slama, Hynek Hadraba, Katarina Drdlikova, Jaroslav Cihlar: On the role of the indifferent electrolyte LiCl in electrophoretic deposition of hydroxyapatite from 2-propanol dispersions, Ceramics International 42 (2016) 16529–16534.
K. Castkova, H. Hadraba, A. Matousek, P. Roupcova, Z. Chlup, L. Novotna, J. Cihlar: Synthesis of Ca,Y-zirconia/hydroxyapatite nanoparticles and composites, Journal of the European Ceramic Society 36 (2016) 2903-2912.
J. Matějíček, M. Vilémová, H. Hadraba, F. Di Gabriele, I. Kuběna, E. Kolíbalová, J. Michalička, J. Čech, A. Jäger: Behavior of W-based materials in hot helium gas, Nuclear Materials and Energy 9 (2016) 405–410
Martin Moník, Hynek Hadraba: Mechanical characterization of raw material quality and its implication for Early Upper Palaeolithic Moravia, Quaternary International 425 (2016) 425-436.
H. Hadraba, Z. Chlup, D. Drdlík, R. Bermejo, O. Ševeček: Influence of edge crack appearance on fracture behaviour of alumina/zirconia laminates, Fractography of Advanced Ceramics (FAC 2016), Smolenice, 2016, poster.
Martina Halasová, Martin Černý, Adam Strachota, Zdeněk Chlup, Ivo Dlouhý: Fracture response of SiOC based composites on dynamic loading, Journal of Composite Materials 50[11] (2016) 1547–1554.
Kozák, V., Chlup, Z., Padělek, P., Dlouhý, I.: Prediction of the Traction Separation Law of Ceramics Using Iterative Finite Element Modelling, Materials Structure and Micromechanics of Fracture VIII (MSMF 8) Brno (2016) 186-193.
Kotrechko, S., Gryshchenko, V., Kozák, V., Dlouhý, I.: Method of Threshold Stress Determination for a Local Approach to Cleavage Fracture , Materials Structure and Micromechanics of Fracture VIII (MSMF 8) Brno (2016) 281-285.
MAN J, KUBĚNA I, SMAGA M, MAN O, JÄRVENPÄÄ A, WEIDNER A, CHLUP Z, POLÁK J: Microstructural changes during deformation of AISI 300 grade austenitic stainless steels: Impact of chemical heterogeneity. Proc. Struct. Integr. 2 (2016) 2299–2306.
Harshit Porwal, Richa Saggar, Peter Tatarko, Salvatore Grasso, Theo Saunders, Ivo Dlouhý, Mike J. Reece: Effect of lateral size of graphene nano-sheets on the mechanical properties and machinability of alumina nano-composites; Ceramics International 42 (6) (2016) 7533-7542.
Tingting Guo, Filip Siska, M.R. Barnett: Distinguishing between slip and twinning events during nanoindentation of magnesium alloy AZ31, Scripta Materialia 110 (2016) 10–13.
Filip Siska, Ludek Stratil, Miroslav Smid, Natalia Luptakova, Tomas Zalezak, Denisa Bartkova: Deformation and fracture behavior of the P91 martensitic steel at high temperatures, Materials Science & Engineering A 672 (2016) 1–6.
Information leaflet
download pdf (1,3MB)



central european institute of technology


H2020-MSCA-ITN-2014-ETN




Last update
19. 09. 2017