test
Publications
2018
Čermák J., Král L: Hydrogen storage behavior of Mg@Mg2Si and Mg@Mg17Al12 alloys with additions of carbon allotropes and talc. Journal of Alloys and Compounds 744 (2018) 252-259.
Zdeněk Chlup, Martin Černý, Adam Strachota, Hynek Hadraba, Petr Kácha, Martina Halasová: Effect of the exposition temperature on the behaviour of partially pyrolysed hybrid basalt fibre composites, Composites Part B 147 (2018) 122–127.
Anna Hojna, Hynek Hadraba, Fosca Di Gabriele, Roman Husak: Behaviour of pre-stressed T91 and ODS steels exposed to liquid lead-bismuth eutectic, Corrosion Science 131 (2018) 264–277.
Daniel Drdlik, Martin Slama, Hynek Hadraba, Katarina Drdlikova, Jaroslav Cihlar: Physical, mechanical, and biological properties of electrophoretically deposited lithium-doped calcium phosphates, Ceramics International 44 (2018) 2884–2891.
Kloc L., Dymáček P., Sklenička V.
High temperature creep of Sanicro 25 austenitic steel at low stresses
Materials Science & Engineering A 722 (2018) p. 88-92
Sklenička V., Kuchařová K., Svobodová M., Král P., Kvapilová M., Dvořák J.
The effect of a prior short-term ageing on mechanical and creep properties of
P92 steel
Materials Characterization 136 (2018) p. 388-297
Sklenička V., Kuchařová K., Svoboda M.
Creep behaviour and microstructure evolution of advanced creep-resistant 9%Cr martensitic steels under cyclic thermal loading
Kovové materiály 56 (2018) p. 1-13
2017
Bártková D., Šmíd M., Mašek B., Svoboda J., Šiška F.
Kinetic study of static recrystallization in an Fe–Al–O ultra-fine-grained nanocomposite
Philosophical Magazine Letters 97, No. 10 (2017) p. 379-385
Luca Bertolla, Ivo Dlouhý, Peter Tatarko, Alberto Viani, Amit Mahajan, Zdeněk Chlup, Michael J. Reece, Aldo R. Boccaccini: Pressureless spark plasma–sintered Bioglass® 45S5 with enhanced mechanical properties and stress–induced new phase formation, Journal of the European Ceramic Society 37 (2017) 2727–2736.
J. Čermák, L. Král, P. Roupcová: Improvement of hydrogen storage kinetics in ball-milled magnesium doped with antimony. Int J Hydrogen Energ. 42 (2017) 6144–6151.
Jaroslav Kastyl, Zdenek Chlup, Frank Clemens, Martin Trunec: Mechanical properties of zirconia core-shell rods with porous core and dense shell prepared by thermoplastic co-extrusion, Journal of the European Ceramic Society 37 (2017) 2439–2447.
Zdenek Chlup, Radovan Zizka, Jakub Kania, Michal Pribyl: Fracture behaviour of teeth with conventional and mini-invasive access cavity designs, Journal of the European Ceramic Society 37 (2017) 4423–4429.
Martin Trunec, Zdenek Chlup: Subtractive manufacturing of customized hydroxyapatite scaffolds for bone regeneration, Ceramics International 43 (2017) 11265–11273.
Jakub Roleček, David Salamon, Zdeněk Chlup: Mechanical properties of hybrid composites prepared by ice-templating of alumina, Journal of the European Ceramic Society 37 (2017) 4279–4286.
Dymáček P., Dobeš F., Kloc L.
Small Punch Testing of Sanicro 25 Steel and its Correlation with Uniaxial Tests
Key Engineering Materials 734 (2017) p. 70-76
Dymáček P., Dobeš F., Kloc L.
Determination of Mechanical Properties of Metallic Materials
from Very Small Volumes by Means of Small Punch Test
Key Engineering Materials 741 (2017) p. 116-121
BORKO, K., FINTOVÁ, S., HADZIMA, B. 2017. Linear Potentiodynamic Characterization of ECAPed Biocompatible AZ91 Magnesium Alloy. Materials Science Forum. Vol. 891. p. 404-408. ISSN: 1662-9752.
HOJNA A, DI GABRIELE F, HADRABA H, HUSAK R, KUBENA I, ROZUMOVA L, BUBLIKOVA P, KALIVODOVA J, MATEJICEK J: Fracture behaviour of the 14Cr ODS steel exposed to helium and liquid lead. J. Nucl. Mater. 490 (2017) 143–154.
Karel Maca, Vaclav Pouchly, Daniel Drdlik, Hynek Hadraba, Zdenek Chlup: Dilatometric study of anisotropic sintering of alumina/zirconia laminates with controlled fracture behaviour, Journal of the European Ceramic Society 37 (2017) 4287–4295.
Daniel Drdlik, Katarina Drdlikova, Hynek Hadraba, Karel Maca: Optical, mechanical and fractographic response of transparent alumina ceramics on erbium doping, Journal of the European Ceramic Society, Volume 37, Issue 14, November 2017, Pages 4265-4270.
Katarina Drdlikova, Robert Klement, Hynek Hadraba, Daniel Drdlik, Dusan Galusek, Karel Maca: Luminescent Eu3+-doped transparent alumina ceramics with high hardness, Journal of the European Ceramic Society 37 (2017) 4271–4277.
Hynek Hadraba, Roman Husak, Ludek Stratil, Filip Siska, Zdenek Chlup, Viktor Puchy, Jan Michalicka: Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications, Fusion Engineering and Design 124 (2017) 1028-1032.
L. Ďáková, J. Füzer, S. Dobák, P. Kollár, M. Fáberová, M. Strečková, R. Bureš, H. Hadraba: The Influence of NiZnFe₂O₄ Content on Magnetic Properties of Supermalloy Type Material, Acta Physica Polonica A 131 (2017) 813-815.
Král P., Dvořák J., Kvapilová M., Blum W., Sklenička V.
The influence of long-term annealing at room temperature on creep
behaviour of ECAP-processed copper
Materials Letters 188 (2017) p. 235-238
Blum W., Král P., Dvořák J., Petrenec M., Eisenlohr P., Sklenička V.
In situ study of thermally activated flow and dynamic restoration of
ultrafine-grained pure Cu at 373 K
Journal of Materials Research 32, No. 24 (2017) p. 4514-4521
Sklenička V., Kuchařová K., Král P., Kvapilová M., Dvořák J.
Applicability of empirical formulas and fractography
for assessment of creep life and creep fracture modes
of tempered martensitic 9%Cr steel
Kovové Materiály 55 (2017) p. 69–80
Fischer F. D., Zickler G. A., Svoboda J.
Calibration of phase field parameters demonstrated on
kinetics of a shrinking single grain
Philosophical Magazine Letters 97, No.3 (2017) p. 92-100
Zaležák T., Šiška F., Stratil L., Luptáková N., Šmíd M., Bártková D., Svoboda J., Dlouhý A.
A Numerical Analysis of Deformation Processes in Oxide Dispersion-Strengthened Materials – Influence of Dislocation-Particle Interactions
Solid State Phenomena 258 SSP (2017) p. 106-109
Information leaflet
download pdf (1,3MB)



central european institute of technology


H2020-MSCA-ITN-2014-ETN




Last update
18. 05. 2018