test
Running projects
Improvement of Properties and Complex Characterization of New Generation Fe-Al-O Based Oxide Precipitation Hardened Steels
Investigator: RNDr. Jiří Svoboda, CSc., DSc.


Experimental research and modelling of modified fuel cladding under LOCA conditions
Investigator: prof. Ing. Václav Sklenička, DrSc.


Experimental investigation and mathematical simulation of behaviour of the modified cladding tubes of nuclear fuel under storage conditions
Co-investigator: RNDr. Luboš Kloc, CSc.


Research and development of nickel and cobalt based superalloys castings
Investigator: prof. Ing. Václav Sklenička, DrSc.


Creep damage mechanisms in advanced tungsten modified 9%Cr ferritic steel
Investigator: prof. Ing. Václav Sklenička, DrSc.


Creep deformation of new grade UNS S31035 austenitic steel including transient effects
Investigator: RNDr. Luboš Kloc, CSc.


Interstitial impurities in NiTi-based shape memory alloys
Investigator: prof. RNDr. Antonín Dlouhý, CSc.


Utilization of theoretical and experimental approaches to sintering for tailoring the microstructure and properties of advanced ceramic materials
Co-investigator: RNDr. Jiří Svoboda, CSc., DSc.


Inverse process chain modeling for Al-castings and induction heat treated steel rods
Co-investigator: RNDr. Jiří Svoboda, CSc., DSc.


Finished projects
Preparation and Optimization of Creep Resistant Submicron-Structured Composite with Fe-Al Matrix and Al2O3 Particles
Investigator: RNDr. Jiří Svoboda, CSc., DSc.


Phase Stability and Plasticity in Medium-to-High-Entropy Alloys
Investigator: prof. RNDr. Antonín Dlouhý, CSc.


Development of new-generation ODS alloys and ODS composites
Investigator: RNDr. Jiří Svoboda, CSc., DSc.


Z-phase strengthened steels for ultra-supercritical power plants
Co-investigator: RNDr. Jiří Svoboda, CSc., DSc.


Optimizing the high temperature mechanical properties of iron aluminides of Fe3Al type with carbide forming elements
Investigator: Ing. Ferdinand Dobeš, DrSc.


NETME Working - Innovation and Technology Transfer in Mechanical Engineering
Co-investigator: RNDr. Jiří Svoboda, CSc., DSc.


Microstructural features and mechanical properties of nanocrystalline titanium
Co-investigator: Ing. Jiří Dvořák, Ph.D.


Investigation of creep and fatigue behaviour of metallic nanomaterials processed by severe plastic deformation
Co-investigator: Mgr. Marie Kvapilová, Ph.D.


Research of materials changes occurring in advanced steels used for construction and reconstruction of pipelines in power and chemical plants
Co-investigator: prof. Ing. Václav Sklenička, DrSc.


Creep and oxidation properties of E110 cladding tube under LOCA temperature transient
Co-investigator: prof. Ing. Václav Sklenička, DrSc.


Research of the Influence of Orbital Head Welding Technology of Thick-Walled Tubes/Pipes on their Long-Therm Lifetime in Condition of Modern Power Plants Service
Co-investigator: prof. Ing. Václav Sklenička, DrSc.


Material component performance driven solutions for long-term efficiency increase in ultra supercritical power plants (MACPLUS)
Co-investigator: prof. Ing. Václav Sklenička, DrSc.


The impact of atomic trapping on diffusion and phase transformation kinetics
Co-investigator: RNDr. Jiří Svoboda, CSc., DSc.


Influence of initial crystallographic orientation on creep behaviour of SPD materials
Investigator: Ing. Petr Král, Ph.D.


Service security of welded high-strength pressurized pipelines
Co-investigator: RNDr. Jiří Svoboda, CSc., DSc.


The role of stress state and vacancy supersaturation at the formation of binary hollow nanoparticles
Investigator: RNDr. Jiří Svoboda, CSc., DSc.


Thermodynamic modelling of microstructure evolution in nanocomposites
Investigator: RNDr. Jiří Svoboda, CSc., DSc.


Modelling of diffusional phase transformations in multi-component systems with multiple stoichiometric phases
Investigator: RNDr. Jiří Svoboda, CSc., DSc.


Martensitic transformations in NiTi alloys
Investigator: prof. RNDr. Antonín Dlouhý, CSc.


Deformation mechanisms of in-situ composite materials
Investigator: prof. RNDr. Antonín Dlouhý, CSc.


Study of nano-structure materials consolidated from powder compacts by ECAP technique
Investigator: Ing. Jiří Dvořák, Ph.D.


Investigation of possibilities of strengthening of iron-aluminides-based alloys by second-phase particles
Investigator: Ing. Ferdinand Dobeš, DrSc.


Numerical modeling of small punch tests on miniaturized specimens from advanced steels for reliable life-time estimation
Investigator: Ing. Petr Dymáček, Ph.D.


Transient Effects in Creep at Conditions Leading to Very Low Strain Rates
Investigator: RNDr. Luboš Kloc, CSc.


Struktura, vlastnosti a metalurgie téměř stechiometrických slitin TiAl
Investigator: prof. RNDr. Antonín Dlouhý, CSc.


Effect of reinforcement-matrix interface on the strength and thermal properties of Mg-Al-Ca alloy composites
Investigator: RNDr. Karel Milička, DrSc.


Modelování kinetiky difúzních fázových transformací v pevných látkách
Investigator: RNDr. Jiří Svoboda, CSc., DSc.


Solutions of materials and technological innovations of new generation power and chemical plants operating at high temperatures
Co-investigator: prof. Ing. Václav Sklenička, DrSc.


Numerical simulations of small punch tests on miniature specimens for determination of residual and guaranteed life of heat resistant steels.
Investigator: Ing. Petr Dymáček, Ph.D.


Modelling of diffusive and massive phase transformations in solids
Investigator: RNDr. Jiří Svoboda, CSc., DSc.


NiTi Shape Memory Alloys and Their Processing-Structure-Transformation Relationship
Investigator: prof. RNDr. Antonín Dlouhý, CSc.


High strain sensitivity creep testing techniques for validation of creep constitutive models
Investigator: RNDr. Luboš Kloc, CSc.


The analysis of mechanisms and factors influencing the creep resistance of perspective iron aluminides on the basis of Fe3Al and FeAl
Investigator: Ing. Ferdinand Dobeš, DrSc.


Microstructural evolution and creep strength in advanced power plant steels
Investigator: prof. Ing. Václav Sklenička, DrSc.


Materials solutions of new generation of heat transfer facilities for power and chemical engineering
Co-investigator: prof. Ing. Václav Sklenička, DrSc.


Characterization of the precipitate microstucture
Investigator: RNDr. Jiří Svoboda, CSc., DSc.


Thermal and Strain Cycles in the TiAl Intermetallic Casting - Ceramic Shell Mould System
Investigator: prof. RNDr. Antonín Dlouhý, CSc.


Creep processes in ultrafine-grained metals and alloys processed by the ECAP technique
Investigator: prof. Ing. Václav Sklenička, DrSc.


Microprocesses of plastic deformation in light metals based advanced alloys and composites at elevated temperatures
Investigator: RNDr. Karel Milička, DrSc.


Analysis of heat resistance of weldments in energetic facilities by means of small punch tests on thin discs
Investigator: RNDr. Karel Milička, DrSc.


A Numerically Based Optimization of a Near-gamma TiAl Precision Casting Process
Investigator: prof. RNDr. Antonín Dlouhý, CSc.


Alternative methods of the activation analysis in creep
Investigator: Ing. Ferdinand Dobeš, DrSc.


Small punch creep tests of mechanically alloyed aluminium alloys
Investigator: Ing. Ferdinand Dobeš, DrSc.


Thermally activated deformation and internal stress in alloys and composites
Investigator: RNDr. Karel Milička, DrSc.


Long-term microstructural stability and creep behaviour of advanced 9-12%Cr steels
Investigator: prof. Ing. Václav Sklenička, DrSc.


Creep of a priori Brittle Materials for High Temperature Applications at Very Low Creep Rates
Investigator: RNDr. Luboš Kloc, CSc.


High-temperature properties of Ni-Cr-W-C systém
Investigator: prof. Ing. Václav Sklenička, DrSc.


Creep data prediction for advanced engineering alloys
Investigator: prof. Ing. Václav Sklenička, DrSc.


Information leaflet
download pdf (1,3MB)



central european institute of technology


H2020-MSCA-ITN-2014-ETN




Last update
19. 09. 2017