test
prof. Ing. Václav Sklenička, DrSc.
Position: researcher
Groups: Advanced Metallic Materials and Metal Based Composites (CEITEC IPM), Advanced High-temperature Materials Group
Rooms: 418
Phone numbers: +420 532 290 454, +420 541 212 290
E-mail: sklen@DELETE-THIS.CZ@DELETE-THIS.COMipm.cz.COM
Reseacher ID: G-7077-2014
Projects
Experimental research and modelling of modified fuel cladding under LOCA conditions
Research and development of nickel and cobalt based superalloys castings
Creep damage mechanisms in advanced tungsten modified 9%Cr ferritic steel
Research of materials changes occurring in advanced steels used for construction and reconstruction of pipelines in power and chemical plants
Creep and oxidation properties of E110 cladding tube under LOCA temperature transient
Research of the Influence of Orbital Head Welding Technology of Thick-Walled Tubes/Pipes on their Long-Therm Lifetime in Condition of Modern Power Plants Service
Material component performance driven solutions for long-term efficiency increase in ultra supercritical power plants (MACPLUS)
Solutions of materials and technological innovations of new generation power and chemical plants operating at high temperatures
Microstructural evolution and creep strength in advanced power plant steels
Materials solutions of new generation of heat transfer facilities for power and chemical engineering
Creep processes in ultrafine-grained metals and alloys processed by the ECAP technique
Long-term microstructural stability and creep behaviour of advanced 9-12%Cr steels
High-temperature properties of Ni-Cr-W-C systém
Creep data prediction for advanced engineering alloys
Publications:
2018
Kloc L., Sklenička V., Dymáček P., Plešek J.
New creep constitutive equation for finite element modelling including transient effects
Mechanics of Materials 119 (2018) p. 49-55
Kloc L., Dymáček P., Sklenička V.
High temperature creep of Sanicro 25 austenitic steel at low stresses
Materials Science & Engineering A 722 (2018) p. 88-92
Král P., Dvořák J., Sklenička V., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.
Microstructure and creep behaviour of P92 steel after HPT
Materials Science & Engineering A 723 (2018) p. 287-295
Král P., Dvořák J., Sklenička V., Masuda T., Horita Z., Kuchařová K., Kvapilová M., Svobodová M.
The Effect of Ultrafine-Grained Microstructure on Creep Behaviour of 9% Cr Steel
Materials 11, Issue 5, Article number 787 (2018) p. 117-118
Sklenička V., Kuchařová K., Svobodová M., Král P., Kvapilová M., Dvořák J.
The effect of a prior short-term ageing on mechanical and creep properties of
P92 steel
Materials Characterization 136 (2018) p. 388-297
Sklenička V., Kuchařová K., Svoboda M.
Creep behaviour and microstructure evolution of advanced creep-resistant 9%Cr martensitic steels under cyclic thermal loading
Kovové materiály 56 (2018) p. 1-13
Sklenička V., Kvapilová M., Král P., Dvořák J., Svoboda M., Podhorná B., Zýka J., Hrbáček K., Joch A.
Degradation processes in high-temperature creep of cast cobalt-based superalloys
Materials Characterization 144 (2018) p. 479-489
2017
Král P., Dvořák J., Kvapilová M., Blum W., Sklenička V.
The influence of long-term annealing at room temperature on creep
behaviour of ECAP-processed copper
Materials Letters 188 (2017) p. 235-238
Takizawa Y., Kajita T., Král P., Masuda T., Watanabe K., Yumoto M., Otagiri Y., Sklenička V., Horita Z.
Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS)
Materials Science & Engineering A 682 (2017) p. 603-612
Král P., Blum W., Dvořák J., Eisenlohr P., Petrenec M., Sklenička V.
Dynamic restoration of severely predeformed, ultrafine-grained pure Cu at 373 K observed in situ
Materials Characterization 134 (2017) p. 329-334
Blum W., Král P., Dvořák J., Petrenec M., Eisenlohr P., Sklenička V.
In situ study of thermally activated flow and dynamic restoration of
ultrafine-grained pure Cu at 373 K
Journal of Materials Research 32, No. 24 (2017) p. 4514-4521
Král P., Sklenička V., Kuchařová K., Svobodová M., Kvapilová M., Dvořák J.
Development of Creep Damage in Similar Weld Joints of P92 Steel Pipe
Solid State Phenomena 270 SSP (2017) p. 162-167
Sklenička V., Kuchařová K., Kvapilová M., Král P., Dvořák J.
Combination of Experiments and Continuum Damage Mechanics
Approach for Prediction of Creep Fracture in an Advanced 9%Cr Steel
Solid State Phenomena 258 SSP (2017) p. 591-594
8th International Conference on Materials Structure & Micromechanics of Fracture (June 27-29, 2016, Brno, Czech Republic)
Betekhtin V. I., Kadomtsev A. G., Narykova M. V., Amosova O. V. ,Sklenička V.
Defect Structure and Mechanical Stability of Microcrystalline Titanium Produced by Equal Channel Angular Pressing
Technical Physics Letters 43, No. 1 (2017) p. 61-63
Sklenička V., Kuchařová K., Král P., Kvapilová M., Dvořák J.
Applicability of empirical formulas and fractography
for assessment of creep life and creep fracture modes
of tempered martensitic 9%Cr steel
Kovové Materiály 55 (2017) p. 69–80
Betekhtin V. I., Sklenička V., Kadomtsev A. G., Kolobov Yu. R., Narykova M. V.
Defect Structure and Thermomechanical Stability
of Nano- and Microcrystalline Titanium Obtained
by Different Methods of Intense Plastic Deformation
Physics of the Solid State 59, No. 5 (2017) p. 960–966
Sklenička V., Kuchařová K., Kvapilová M., Svoboda M., Král P., Dvořák J.
Creep properties of simulated heat-affected zone of HR3C austenitic steel
Materials Characterization (2017) p. 238-247
Sklenička V., Kuchařová K., Dvořák J., Kvapilová M., Král P.
Creep Damage Tolerance Factor λ of Selected Creep-Resistant Steels
Key Engineering Materials (2017) p. 47-50
2016
Král P., Dvořák J., Jäger A., Kvapilová M., Horita Z., Sklenička V.
Creep properties of aluminium processed by ECAP
Kovové Materiály 54 (2016) p. 441-451
Betekhtin V. I., Kolobov Yu. R., Golosova O. A., Dvořák J., Sklenička V., Kardashev B. K., Kadomtsev A. G., Narykova M. V., Ivanov M. B.
Elastic modulus, microplastic properties and durability of titanium alloys for biomedical applications
Reviews on Advanced Materials Science 45 (2016) p. 42-51
Blum W., Dvořák J., Král P., Eisenlohr P., Sklenička V.
Effects of Grain Refinement by ECAP on the Deformation Resistance of
Al Interpreted in Terms of Boundary-Mediated Processes
Journal of Materials Science & Technology 32 (2016) p. 1309-1320
Sklenička V., Kuchařová K., Svobodová M., Kvapilová M., Král P., Horváth L.:
Creep properties in similar weld joint of a thick-walled P92 steel pipe
Materials Characterization 119 (2016) p. 1-12
Sklenička V., Kuchařová K., Kvapilová M., Král P., Dvořák J.:
Creep Damage and Fracture in Advanced Tungsten Modified 9%Cr Ferritic Steel
Key Engineering Materials 713 (2016) p. 183 - 186
2015
Horvath J., Kral P., Janovec J., Sklenicka V.
The Effect of σ-phase Formation on Long-term Durability of SUPER 304H Steel
METAL 2015: 24th International Conference on Metallurgy and Materials, Conference Proceedings,
TANGER Ltd. (2015) p. 505-510
ISBN 978-80-87294-62-8
Kucharova K., Sklenicka V., Kvapilova M., Svoboda M.:
Creep and microstructural processes in a low-alloy 2.25%Cr1.6%W steel (ASTM Grade 23)
Materials Characterization 109 (2015) p. 1-8
Kvapilova M., Kucharova K., Kloc L., Sklenicka V.
Creep Behaviour of a Zr-1 wt% Nb Alloy at Elevated Temperatures
Acta Physica Polonica A (2015) p. 548-551
V. Sklenicka, K. Kucharova, P. Kral, M. Kvapilova, M. Svobodova, J. Cmakal:
The effect of hot bending and thermal ageing on creep and microstructure evolution in thick-walled P92 steel pipe
Mat. Sci. Eng., A 644 (2015) p. 297-309
Sklenicka, V.; Kucharova, K.; Kvapilova, M.; et al.:
Factors influencing creep resistance in discontinuously reinforced magnesium metal matrix composites
Kovove Mater. 53 (2015) p. 221-229
Betekhtin V.I., Kolobov Yu.R., Sklenicka V., Kadomtsev A.G., Narykova M.V., Dvorak J., Golosov E.V., Kardashev B.K., Kuz’menko I.N.:
Effect of a Defect Structure on the Static and Long-Term Strength of Submicrocrystalline VT1-0 Titanium Fabricated by Plastic Deformation during Screw and Lengthwise Rolling
Technical Physics 60,1 (2015) p. 66–71
Betekhtin V.I., Dvorak J., Kadomtsev A.G., Kardashev B.K., Narykova M.V., Raab G.K., Sklenicka V., Faizova S.N.:
Durability and Static Strength of Microcrystalline Titanium VT1-0 Obtained by Equal_Channel Angular Pressing
Technical Physics Letters 41,1 (2015) p. 80–82
2014
Blum W., Dvorak J., Kral P., Eisenlohr P., Sklenicka V.:
Effect of grain refinement by ECAP on creep of pure Cu
Mater. Sci. Eng., A 590 (2014) p. 423-432
Blum W., Dvorak J., Kral P., Eisenlohr P., Sklenicka V.:
What is "stationary" deformation of pure Cu?
J. Mater. Sci. 49, 8 (2014) p. 2987-2997
2013
Dvorak J, Sklenicka V, Betekhtin VI, Kadomtsev AG, Kral P, Kvapilova M, Svoboda M:
The effect of high hydrostatic pressure on creep behaviour of pure Al and a Cu–0.2 wt% Zr alloy processed by equal-channel angular pressing
Mater. Sci. Eng., A 584 (2013) p. 103-113, DOI: 10.1016/j.msea.2013.07.018
Sklenicka V, Kucharova K, Kvapilova M, Svoboda M, Kral P, Vidrich G:
Creep in an electrodeposited nickel
J. Mater. Sci. 48, 13 (2013) p. 4870-4788
2012
Kral P, Dvorak J, Seda P, Jäger A, Sklenicka V:
Creep in Al single crystal processed by equal-channel angular pressing
Rev. Adv. Mater. Sci. 31, (2012), p. 138-144
Sklenicka V, Dvorak J, Kral P, Svoboda S, Kvapilova M, Kopilov VI, Nikulin SA, Dobatkin SV:
Creep Behavior of a Zirconium Alloy Processed by Equal-Channel Angular Pressing
Acta Physica Polonica A 122, (2012), p. 485-489
Sklenicka V, Dvorak J, Kral P, Svoboda M, Kvapilova M, Langdon TG:
Factors influencing creep flow and ductility in ultrafine-grained metals
Materials Science and Engineering: A 558, (2012), p. 403-411
Sklenicka V, Dvorak J, Svoboda M, Kral P, Kvapilova M:
Chapter 1, Equal-Channel Angular Pressing and Creep in Ultrafine-Grained Aluminium and Its Alloys
Aluminium Alloys - New Trends in Fabrication and Applications, book edited by Zaki Ahmad,(2012), ISBN 978-953-51-0861-0
2011
M. Kvapilová, V. Sklenička, J. Dvořák, P. Král:
An Evaluation of Creep Mechanisms in Ultrafine-Grained Metals
Key Engineering Materials Vol. 465, (2011), pp 382-385
V. Sklenička, P. Král, J. Dvořák, M. Kvapilová, M. Kawasaki and T. G. Langdon:
Effect of Equal-Channel Angular Pressing on the Creep Resistance of Precipitation-Strengthened Alloys
Material Science Forum vols. 667-669, (2011), pp 897-902
Sklenička, Václav - Kloc, Luboš
Creep in boiler materials: mechanisms, measurement and modelling.
Power plant life management and performance improvement. Cambridge : Woodhead Publishing Limited, 2011 - (Oakey, J.) S. 1-684. ISBN 978-1-84569-726-6
M. Kawasaki, V. Sklenicka, T. G. Langdon:
Creep behavior of metals processed by equal-channel angular pressing
Kovové materiály - Metallic materials 49, (2011), pp. 75-83
Betekhtin V.I., Kadomtsev A.G., Sklenicka V., Narykova M.V.:
Effect of Hydrostatic Pressure on Defect Structure and Durability of Ultrafine-Grained Aluminum
Tech. Phys. Lett. 37, 10 (2011) pp. 977-979
2010
Luboš Kloc, Michael Spindler, Václav Sklenička:
Creep of Ex-service AISI-316H Steel at Very Low Strain Rates,
Materials for Advanced Power Engineering 2010.
Forschungszentrum Jülich GmbH, 2010 - (J. Lecomte-Beckers, Q. Contrepois, T. Beck, B. Kuhn eds.)
S. 142-149. ISBN 978-3-89336-685-9. ISSN 1866-1793.
Dvořák J, Sklenička V, Král P, et al.:
CHARACTERIZATION OF CREEP BEHAVIOUR AND MICROSTRUCTURE CHANGES IN PURE COPPER PROCESSED BY EQUAL-CHANNEL ANGULAR PRESSING
REVIEWS ON ADVANCED MATERIALS SCIENCE Vol. 25, (2010), p. 225-232.
Saxl I, Sklenicka V, Ilucova L, et al.:
CHARACTERIZATION OF CREEP BEHAVIOUR AND MICROSTRUCTURE CHANGES IN PURE COPPER PROCESSED BY EQUAL-CHANNEL ANGULAR PRESSING
REVIEWS ON ADVANCED MATERIALS SCIENCE Vol. 25,(2010), p.233-240.
V. Sklenicka, K. Kucharova, M. Svoboda, A. Kroupa, J. Cmakal:
Creep behaviour and microstructural changes of advanced creep resistant steels after long-term isothermal ageing
Mater. Sci. Forum, 654-656, (2010), 504-507.
Betekhtin VI, Sklenicka V, Saxl I, Kardashev BK, Kadomtsev AG, Narykova MV:
Influence of the number of passes under equal-channel angular pressing on the elastic-plastic properties, durability, and defect structure of the Al + 0.2 wt % Sc alloy
Phys. Solid State, 52, 8 (2010) p. 1629-1636
2009
Luboš Kloc and Václav Sklenička:
Pre-primary stage of low strain rate creep in metals.
Mater. Sci. Forum 604-605, (2009) 351-356
Kloc, Luboš, Sklenička, Václav
Pre-primary stage of low strain rate creep in metals.
Materials Science Forum. Vol. 604-605,(2009), p. 351-356.
I. Saxl, V. Sklenička, L. Ilucová, M. Svoboda, J. Dvořák, P. Král
The link between microstructure and creep in aluminum processed by equal-channel angular pressing
Mater. Sci. Eng. A 503,(2009), p.82
V. Sklenička, J. Dvořák, P. Král, M. Svoboda, I. Saxl
Some factors affecting the creep behaviour of metallic materials processed by equal-channel angular pressing
Int. J. Mat. Res. (formelly Z. Metallkd.) 100, (2009), p. 762
V. Sklenička, K. Kuchařová, M. Svoboda, I. Saxl: Creep Response and Microstructural Changes During Intermittent Heating of Advanced Tempered Martensitic 9-12%Cr Steels, Mater. Sci. Forum, 2009, 604-605, -, s. 367-377.
2008
Král, P., Dvořák, J., Sklenička, V.
Microstructural evolution and creep of an Al-0.2wt.%Sc alloy after equal-channel angular pressing.
Mater. Sci. Forum Vols. 584-586, (2008), p. 846-851.
Petra Cihlářová, Jiří Švejcar, Václav Sklenička
Microstructure and mechanical properties of electrodeposited nickel and its particle-reinforced nanocomposite
Materials Science Forum Vols. 567-568 (2008) pp. 205-208
Ivan Saxl, Lucia Ilucová, Milan Svoboda, Václav Sklenička,
Vladimir I. Betekhtin, Andrey G. Kadomtsev, Petr Král
Structural Non-homogeneity and Thermal Instability of ECAP
Aluminium
Materials Science Forum Vols. 567-568 (2008) pp. 193-196
Saxl, Ivan, Ilucová, Lucia, Svoboda, Milan, Sklenička, Václav, Betekhtin, V. I., Kadomtsev, A. G., Král, Petr
Structural non-homogenity and thermal instability of ECAP aluminium.
Materials Science Forum. Vol. 567-568, (2008), p. 193-196.
2007
Saxl, Ivan - Sklenička, Václav - Ilucová, Lucia - Svoboda, Milan - Král, Petr
Structure development during ECAP and subsequent creep of aluminium.
Materials Science Forum. Roč. 539-543, (2007), s. 493-498. ISSN 0255-5476
Václav Sklenička, Květa Kuchařová, Milan Svoboda and Ivan Saxl
Effect of Intermittent Heating on Creep Behaviour
of Advanced 9-12%Cr Power Plant Steels
Materials Science Forum Vols. 561-565 (2007) pp. 81-84
I.Saxl, V. Sklenička, L. Ilucova, M. Svoboda and P. Kral
Subgrain boundaries in ECAP aluminium
Materials Science Forum, Vols 561-565, (2007), pp 813-816
I. Saxl, V. Sklenička, L. Ilucova, M. Svoboda and P. Král
Subgrain boundaries in ECAP aluminium
Materials Science Forum, Vols. 561-565, (2007), pp 813-816
V. Sklenička, K. Kuchařová, M. Pahutová, G. Vidrich, M. Svoboda, H. Ferkel
Creep in electrodeposited submicrocrystalline nickel and its particle-reinforced nanocomposite.
Materials Science and Engineering A 462 (2007) 269-274
Betekhtin, V. I., Kadomtsev, A. G., Sklenička, Václav, Saxl, Ivan
Nanoporosity of fine-crystalline aluminium and an aluminium-based alloy.
Physics of the Solid State. Vol. 49, 10 (2007), p. 1874-1877. ISSN 1063-7834.
M. Svoboda, M. Pahutová, K. Kuchařová, V. Sklenička, K.U. Kainer
Microstructure and creep behaviour of magnesium hybrid composites.
Materials Science and Engineering A 462 (2007) 220-224
2006
Kloc L., Sklenička V.:
Creep of 0.5CrMoV Steel at Very Low Strain Rates
in: J. Lecomte-Beckers et al. (eds.):
Materials for Advanced Power Engineering 2006
Forschongszentrum Julich 2006, vol. II, p. 1011
V. Sklenička, P. Král, L. Ilucová,I. Saxl, J Dvořák, M. Svoboda:
Inhomogenity of microstructure and creep of ECAP aluminium
Mater. Sci. Forum, 503-504, (2006),p. 245-250.
2005
V. Slenička, J. Dvořák, M. Svoboda:
Effect of processing route on microstructure and mechanical behaviour of ultrafine grained metals processed by severe plastic deformation
Mater. Sci. Forum, 482 (2005),p. 83-88
V. Sklenička, J. Dvořák, P. Král:
Creep processes in pure aluminium processed by equal-channel angular pressing
Mater. Sci. Eng. A,410-411,(2005), 408-412
V. Sklenička, K. Kuchařová, J. Kudrman, M. Svoboda, L. Kloc:
Microstructure stability and creep behaviour of advanced high chromium ferritic steels
Kovové Mater., 43, No. 1, (2005), p. 20-33
M. Pahutová, V. Sklenička, K. Kuchařová, M. Svoboda, T.G. Langdon:
Flow mechanisms in creep of short-fibre AZ91 alloy-based composite
Kovové Mater.,43, No. 1, (2005), p. 34-44
V. Sklenička, K. Kuchařová, M. Pahutová, G. Vidrich, M. Svoboda, H. Ferkel:
Rev. Adv. Mater. Sci. 10, (2005), p. 172-175
2004
L. Kloc and V. Sklenička:
Confirmation of low stress creep regime in 9% chromium steel by stress change creep experiments
Mater. Sci. Eng. A 387-389 (2004) 633-638
L. Kloc and V. Sklenička:
Importance of the loading history in creep of 9% Cr steel
Proc. of International Conference BALTICA VI Life Management and Maitenance for Power Plants
VTT Symposium 234, VTT, Espoo, Finland 2004, pp. 491-498
V. Sklenička, J. Dvořák, M. Svoboda:
Creep in ultrafine grained aluminium
Mater. Sci. Eng. A, 387-389, (2004),p. 696-701
V. Sklenička, T.G.Langdon:
Creep properties of a fiber-reinforced magnesium alloy
J. Mater. Science 39, (2004), 1647-1652
L. Kloc, V. Sklenička:
Mater. Sci. Eng. A, 387-389, (2004), p. 633-638
2003
L. Kloc and V. Sklenička:
Residual Crepp Life Assessment - is the Current Approach Viable?
in: R. K. Penny (ed.): Asset Management of Aged Plant and Materials: Assessment Methods.
Proceedings of the CAPE 2003 conference, pp. 235-244.
EMAS Publishing Ltd. Sheffield, U.K. 2003.
M. Pahutová, V. Sklenička, K. Kuchařová, M. Svoboda:
Creep resistance in magnesium alloys and composites
Int. Journal of Materials & Product Technology, 18, Nos. 1/2/3, 2003,p. 116-140
V. Sklenička, M. Pahutová, K.Kuchařová, M. Svoboda, K.U. Kainer:
Creep behaviour magnesium monolothic alloys and composites
Materials Science Forum, Vols.419-422, (2003), p. 805-810
V. Sklenička, K.Kuchařová, M. Svoboda, L. Kloc, J. Buršík, A. Kroupa:
Long-term creep behavior of 9–12%Cr power plant steels
Materials Characterization 51, (2003), p. 35-48
2002
L. Kloc, J. Fiala and V. Sklenička:
On the Strengthening Factors of Structural Steels under Low Stress Creep Regime
Chem. Listy 96(S) (2002), 212-214
V. Sklenička, J. Kudrman, K. Kuchařová, R. Daněk, K. Hrbáček:
Creepové chování litých Ni-Cr-W-C slitin
Kovové Mater.40, No.1, (2002), p. 11-23
V. Sklenička, M. Pahutová, K.Kuchařová, M. Svoboda, T.G. Langdon:
Creep processes in magnesium alloys and their composites
Metallurgical and Materials Transaction A, 33A, (2002), p. 883-889
M. Svoboda, M. Pahutová, K. Kuchařová, V. Sklenička, T.G. Langdon: The role of matrix microstructure in the creep behaviour of discontinuous fiber-reinforced AZ 91 magnesium alloy, Materials Science and Engineering A324 (2002) 151-156.
2001
L. Kloc, V. Sklenička and J. Ventruba:
Comparison of low stress creep properties of ferritic and austenitic creep resistant steels
Mater. Sci. Eng. A319-321 (2001), 774-778
L. Kloc and V. Sklenička:
Viscous Creep Regime in Creep Resistant Steels
Proc. of the 7th European Conference on Advanced Materials and Processes EUROMAT 2001
AIM, Milano 2001. Paper #752
L. Kloc and V. Sklenička:
Reliability Problems in Methods of Residual Creep Life Assessment
Proc. of the 10th International Conference Creep Resistant Metallic Materials
Vítkovice R&D, Ostrava 2001
V. Sklenička, M. Svoboda, M. Pahutová, K. Kuchařová, T.G. Langdon:
Microstructural processes in creep of an AZ 91 magnesium-based composite and its matrix alloy
Materials Sciance and Engeneering A, 319-321, (2001), p.741-745
2000
V. Sklenička, M. Pahutová, K.Kuchařová, M. Svoboda, T.G. Langdon:
Creep of reinforced and unreinforced AZ91 magnesium alloy
Key Engineering Materials, 171 - 174, (2000), p. 593-600
Information leaflet
download pdf (1,3MB)



central european institute of technology


H2020-MSCA-ITN-2014-ETN




Last update
19. 10. 2018